Search

Rationale: Silver doping of electrospray is known to increase the abundance of olefinic compounds detected by mass spectrometry. While demonstrated in targeted experiments, this has yet to be investigated in an untargeted study. Utilizing infrared matrix-assisted laser desorption electrospray ionization mass spectrometry imaging (IR-MALDESI-MSI), an untargeted lipidomics experiment on mouse liver was performed to evaluate the advantages of silver-doped electrospray., Methods: 10 ppm silver nitrate was doped into the IR-MALDESI solvent consisting of 60% acetonitrile and 0.2% formic acid. Using an Orbitrap mass spectrometer in positive ionization mode, MSI was performed, analyzing from m/z 150 to m/z 2000 to capture all lipids with potential silver adducts. The lipids detected in the control and silver-doped electrosprays were compared by annotating using the LIPID MAPS Structural Database and eliminating false positives using the metabolite annotation confidence score., Results: Silver-doped electrospray allowed for the detection of such ions of lipid molecules as [M + H] + or [M + NH 4 ] + and as [M + Ag] + . Among the ions seen as [M + H] + or [M + NH 4 ] + , the signal was comparable between the control and silver-doped electrosprays. The silver-doped electrospray led to a 10% increase in the number of detected lipids, all of which contained a bay region increasing the interaction between silver and alkenes. Silver preferentially interacted with lipids that did not contain hard bases such as phosphates., Conclusions: Silver-doped electrospray enabled detection of 10% more olefinic lipids, all containing bay regions in their putative structures. This technique is valuable for detecting previously unobserved lipids that have the potential to form bay regions, namely fatty acyls, glycerolipids, prenol lipids, and polyketides., (© 2024 The Author(s). Rapid Communications in Mass Spectrometry published by John Wiley & Sons Ltd.)

Rationale: Mass spectrometry imaging (MSI) elevates the power of conventional mass spectrometry (MS) to multidimensional space, elucidating both chemical composition and localization. However, the field lacks any robust quality control (QC) and/or system suitability testing (SST) protocols to monitor inconsistencies during data acquisition, both of which are integral to ensure the validity of experimental results. To satisfy this demand in the community, we propose an adaptable QC/SST approach with five analyte options amendable to various ionization MSI platforms (e.g., desorption electrospray ionization, matrix-assisted laser desorption/ionization [MALDI], MALDI-2, and infrared matrix-assisted laser desorption electrospray ionization [IR-MALDESI])., Methods: A novel QC mix was sprayed across glass slides to collect QC/SST regions-of-interest (ROIs). Data were collected under optimal conditions and on a compromised instrument to construct and refine the principal component analysis (PCA) model in R. Metrics, including mass measurement accuracy and spectral accuracy, were evaluated, yielding an individual suitability score for each compound. The average of these scores is utilized to inform if troubleshooting is necessary., Results: The PCA-based SST model was applied to data collected when the instrument was compromised. The resultant SST scores were used to determine a statistically significant threshold, which was defined as 0.93 for IR-MALDESI-MSI analyses. This minimizes the type-I error rate, where the QC/SST would report the platform to be in working condition when cleaning is actually necessary. Further, data scored after a partial cleaning demonstrate the importance of QC and frequent full instrument cleaning., Conclusions: This study is the starting point for addressing an important issue and will undergo future development to improve the efficiency of the protocol. Ultimately, this work is the first of its kind and proposes this approach as a proof of concept to develop and implement universal QC/SST protocols for a variety of MSI platforms., (© 2024 The Authors. Rapid Communications in Mass Spectrometry published by John Wiley & Sons Ltd.)

Rationale: Infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI) utilizes a 2970 nm mid-IR laser to desorb samples with depth resolutions (Z) on the order of micrometers. Conventionally, 5-20 μm thick tissue sections are used to characterize different applications of the IR-MALDESI source, but an optimal thickness has not been systematically investigated., Methods: Mouse liver was sectioned to various thicknesses and analyzed using IR-MALDESI mass spectrometry imaging (MSI). Height profiles of tissue sections of various cryosectioned thicknesses were acquired to affirm tissue thickness. Tissue sections of each thickness were measured using a Keyence microscope. Paraffin wax was cryosectioned, mounted on microscope slides, and measured using a chromatic confocal sensor system to determine the cryostat sectioning accuracy., Results: Analyzing sectioned tissues at higher thickness (>10 μm) leads to lower ion abundance, a decrease in signal over long analysis times, and more frequent instrument cleaning. Additionally, increasing tissue thickness above the optimum (7 μm) does not result in a significant increase in lipid annotations., Conclusions: This work defines an optimal sample thickness for IR-MALDESI-MSI and demonstrates the utility of optimizing tissue thickness for MSI platforms of comparable Z resolution., (© 2023 The Authors. Rapid Communications in Mass Spectrometry published by John Wiley & Sons Ltd.)

Rationale: The level of visual detail of a mass spectrometry image is dependent on the spatial resolution with which it is acquired, which is largely determined by the focal diameter in infrared laser ablation-based techniques. While the use of mid-IR light for mass spectrometry imaging (MSI) has advantages, it results in a relatively large focal diameter and spatial resolution. The continual advancement of infrared matrix-assisted electrospray ionization (IR-MALDESI) for MSI warranted novel methods to decrease laser ablation areas and thus improve spatial resolution., Methods: In this work, a Schwarzschild-like reflective objective was incorporated into the novel NextGen IR-MALDESI source and characterized on both burn paper and mammalian tissue using an ice matrix. Ablation areas, mass spectra, and annotations obtained using the objective were compared against the current optical train on the NextGen system without modification., Results: The effective resolution was determined to be 55 μm by decreasing the step size until oversampling was observed. Use of the objective improved the spatial resolution by a factor of three as compared against the focus lens., Conclusions: A Schwarzschild-like reflective objective was successfully incorporated into the NextGen source and characterized on mammalian tissue using an ice matrix. The corresponding improvement in spatial resolution facilitates the future expansion of IR-MALDESI applications to include those that require fine structural detail., (© 2022 The Authors. Rapid Communications in Mass Spectrometry published by John Wiley & Sons Ltd.)

Rationale: The development and characterization of the novel NextGen infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI) source catalyzed new advancements in IR-MALDESI instrumentation, including the development of a new analysis geometry., Methods: A vertically oriented transmission mode (tm)-IR-MALDESI setup was developed and optimized on thawed mouse tissue. In addition, glycerol was introduced as an alternative energy-absorbing matrix for tm-IR-MALDESI because the new geometry does not currently allow for the formation of an ice matrix. The tm geom was evaluated against the optimized standard geometry for the NextGen source in reflection mode (rm)., Results: It was found that tm-IR-MALDESI produces comparable results to rm-IR-MALDESI after optimization. The attempt to incorporate glycerol as an alternative matrix provided little improvement to tm-IR-MALDESI ion abundances., Conclusions: This work has successfully demonstrated the adaptation of the NextGen IR-MALDESI source through the feasibility of tm-IR-MALDESI mass spectrometry imaging on mammalian tissue, expanding future biological applications of the method., (© 2022 The Authors. Rapid Communications in Mass Spectrometry published by John Wiley & Sons Ltd.)

Rationale: The ability to perform absolute quantitation and non-targeted analysis on a single mass spectrometry instrument would be advantageous to many researchers studying per- and polyfluoroalkyl substances (PFAS). High-resolution accurate mass (HRAM) instrumentation (typically deployed for non-targeted work) carries several advantages over traditional triple quadrupole workflows when performing absolute quantitation. Processing this data using a vendor-neutral software would promote collaboration for these environmental studies., Methods: LC-MS (Orbitrap Exploris 240) was used for absolute quantitation of 45 PFAS using precursor (MS1) peak areas for quantitation, whereas isotope pattern matching and fragmentation (MS2) pattern matching were used for qualitative identification. In addition, a fluorinated chromatographic column achieved superior separation compared to the typical C18 columns typically used in PFAS analyses. This method was validated across eight different chemical classes using recommended guidelines found in EPA Method 537.1 and Skyline data processing software., Results: The validated limits of all 45 compounds, as well as metrics or accuracy and reproducibility, are reported. Most compounds achieved limits of quantitation in the range of 2-50 ng/L. Four newly released Chemours-specific compounds (PEPA, PFO3OA, PFO4DA, and PFO5DoA) were also validated. Aspects of data analysis specific to high resolving power absolute quantitation are reviewed as are the details of processing these data via Skyline., Conclusions: This method shows the feasibility of performing reproducible absolute quantitation of PFAS on an HRAM platform and does so using an open-source vendor-neutral data processing software to facilitate sharing of data across labs and institutions., (© 2022 The Authors. Rapid Communications in Mass Spectrometry published by John Wiley & Sons Ltd.)

Rationale: Radical cationization of endogenous hydrocarbons in cherry tomatoes was previously reported using infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI), a mass spectrometry imaging technique that operates at ambient conditions and requires no sample derivatization. Due to the surprising nature of this odd-electron ionization, subsequent experiments were performed on β-carotene to determine the amount of radical cationization across different sampling conditions., Methods: β-Carotene was analyzed across a variety of sample states using IR-MALDESI followed by Orbitrap mass spectrometric analysis: first, as a standard in ethanol in a well plate; second, as particulates on printer paper; and third, as particulates covered by an ice matrix. These techniques were also performed with a β-carotene standard either in solution with a reducing agent (ascorbic acid) or with ascorbic acid in the electrospray solution., Results: Tandem mass spectrometry confirmed the presence of the radical cation of β-carotene by comparing fragments against NIST and METLIN databases. It was always analyzed as a radical cation when sampled from solution, where ascorbic acid increased radical cation abundance when in solution with β-carotene. Mixed-mode ionization between radical cationization and proton adduction was observed from dried particulates using IR-MALDESI., Conclusions: There are several potential mechanisms for β-carotene radical cationization prior to IR-MALDESI analysis, with multiphoton ionization, thermal degradation, and/or reaction with oxygen appearing to be the most logical explanations. Furthermore, although not the primary cause, changing certain aspects of sample conditions can result in significant mixed-mode ionization with competing protonation., (© 2021 John Wiley & Sons Ltd.)

Rationale: Unsaturated fatty acids (UFAs) play vital roles in regulating cellular functions. In-depth structural characterization of UFAs such as localizing carbon-carbon double bonds is fundamentally important but poses considerable challenges in mass spectrometry (MS) given that the most widely accessible ion activation method, low-energy collision-induced dissociation (CID), primarily generates uninformative fragments (e.g., neutral loss of CO 2 ) that are not suggestive of the double-bond positions., Methods: m-Chloroperoxybenzoic acid (mCPBA) was uniformly deposited onto the sample slides using a TM Sprayer, converting the carbon-carbon double bonds into epoxides under ambient conditions. The epoxidation product was ionized in situ by infrared matrix-assisted laser desorption electrospray ionization mass spectrometry (IR-MALDESI-MS), and subsequently cleaved via CID, generating a diagnostic ion pair associated with the double-bond position. The reaction efficiency, sensitivity and relative quantification capability of the method were validated with five UFA standards dried on glass slides, and then this strategy was demonstrated on thin tissue sections of rat liver and human bladder., Results: The mCPBA reaction yielded conversion rates in the range of 44-60% in 10 min with high specificity and sensitivity. Further tandem mass spectrometry (MS/MS) of the mono-epoxidized products generated informative fragment ions specific to the double-bond positions, and relative quantification of positional isomers in binary mixtures was performed across a wide mole fraction from 0 to 1. An innovative spiral scan pattern was utilized during data acquisition, elucidating the major isomeric compositions of multiple UFAs from a tissue section in a single run., Conclusions: The on-tissue mCPBA epoxidation was implemented into an ambient MS imaging workflow to offer a rapid and simple way for in situ identification and relative quantification of double-bond positional isomers without the requirement for instrument modification. The method can be readily implemented on many other MS platforms to reveal the role of double-bond positional isomers in lipid biology and to discover potential biomarkers., (© 2021 John Wiley & Sons Ltd.)

Rationale: Mass spectrometry imaging of young seedlings is an invaluable tool in understanding how mutations affect metabolite accumulation in plant development. However, due to numerous biological considerations, established methods for the relative quantification of analytes using infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI) mass spectrometry imaging are not viable options. In this study, we report a method for the quantification of auxin-related compounds using stable-isotope-labelled (SIL) indole-3-acetic acid (IAA) doped into agarose substrate., Methods: Wild-type Arabidopsis thaliana seedlings, sur2 and wei8 tar2 loss-of-function mutants, and YUC1 gain-of-function line were grown for 3 days in the dark in standard growth medium. SIL-IAA was doped into a 1% low-melting-point agarose gel and seedlings were gently laid on top for IR-MALDESI imaging with Orbitrap mass spectrometry analysis. Relative quantification was performed post-acquisition by normalization of auxin-related compounds to SIL-IAA in the agarose. Amounts of auxin-related compounds were compared between genotypes to distinguish the effects of the mutations on the accumulation of indolic metabolites of interest., Results: IAA added to agarose was found to remain stable, with repeatability and abundance features of IAA comparable with those of other compounds used in other methods for relative quantification in IR-MALDESI analyses. Indole-3-acetaldoxime was increased in sur2 mutants compared with wild-type and other mutants. Other auxin-related metabolites were either below the limits of quantification or successfully quantified but showing little difference among mutants., Conclusions: Agarose was shown to be an appropriate sampling surface for IR-MALDESI mass spectrometry imaging of Arabidopsis seedlings. SIL-IAA doping of agarose was demonstrated as a viable technique for relative quantification of metabolites in live seedlings or tissues with similar biological considerations., (© 2019 John Wiley & Sons, Ltd.)

Rationale: Identification of subregions under different pathological conditions on cancerous tissue is of great significance for understanding cancer progression and metastasis. Infrared matrix-assisted laser desorption electrospray ionization mass spectrometry (IR-MALDESI-MS) can be potentially used for diagnostic purposes since it can monitor spatial distribution and abundance of metabolites and lipids in biological tissues. However, the large size and high dimensionality of hyperspectral data make analysis and interpretation challenging. To overcome these barriers, multivariate methods were applied to IR-MALDESI data for the first time, aiming at efficiently resolving mass spectral images, from which these results were then used to identify normal regions within cancerous tissue., Methods: Molecular profiles of healthy and cancerous hen ovary tissues were generated by IR-MALDESI-MS. Principal component analysis (PCA) combined with color-coding built a single tissue image which summarizes the high-dimensional data features. Pixels with similar color indicated similar composition. PCA results from healthy tissue were further used to test each pixel in cancerous tissue to determine if it is healthy. Multivariate curve resolution-alternating least squares (MCR-ALS) was used to obtain major spatial features existing in ovary tissues, and group molecules with the same distribution patterns simultaneously., Results: PCA as the predominating dimensionality reduction approach captured over 90% spectral variances by the first three PCs. The PCA images show the cancerous tissue is more chemically heterogeneous than healthy tissue, where at least four regions with different m/z profiles can be differentiated. PCA modeling assigns top regions of cancerous tissue as healthy-like. MCR-ALS extracted three and four major compounds from healthy and cancerous tissue, respectively. Evaluating similarities of resolved spectra uncovered the chemical components that were distinct in some regions on cancerous tissue, serving as a supplementary way to differentiate healthy and cancerous regions., Conclusions: Two unsupervised chemometric methods including PCA and MCR-ALS were applied for resolving and visualizing IR-MALDESI-MS data acquired from hen ovary tissues, improving the interpretation of mass spectrometry imaging results. Then possible normal regions were differentiated from cancerous tissue sections. No prior knowledge is required using either chemometric method, so our approach is readily suitable for unstained tissue samples, which allows one to reveal the molecular events happening during disease progression., (© 2018 John Wiley & Sons, Ltd.)

Rationale: High-throughput screening (HTS) is a critical step in the drug discovery process. However, most mass spectrometry (MS)-based HTS methods require sample cleanup steps prior to analysis. In this work we present the utility of infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI) for monitoring an enzymatic reaction directly from a biological buffer system with no sample cleanup and at high throughput., Methods: IR-MALDESI was used to directly analyze reaction mixtures from a well plate at different time points after reaction initiation. The percent conversion of precursors to products was used to screen the enzyme activity. The reaction was performed with two different concentrations of precursors and enzyme in order to assess the dynamic range of the assay. Eventually, a pseudo-HTS study was designed to investigate the utility of IR-MALDESI screening enzyme activity in a high-throughput manner., Results: IR-MALDESI was able to readily monitor the activity of IDH1 over time at two different concentrations of precursors and enzyme. The calculated Z-factors of 0.65 and 0.41 confirmed the suitability of the developed method for screening enzyme activity in HTS manner. Finally, in a single-blind pseudo-HTS analysis IR-MALDESI was able to correctly predict the identity of all samples, where 8/10 samples were identified with high confidence and the other two samples with lower confidence., Conclusions: The enzymatic activity of IDH1 was screened by directly analyzing the reaction content from the buffer in well plates with no sample cleanup steps. This proof-of-concept study demonstrates the robustness of IR-MALDESI for direct analysis of enzymatic reactions from biological buffers with no sample cleanup and its immense potential for HTS applications., (Copyright © 2017 John Wiley & Sons, Ltd.)

Rationale: Site occupancy measurements using liquid chromatography/mass spectrometry (LC/MS) are reported throughout the literature. However, site occupancy quantification suffers from ionization bias between modified and unmodified peptides containing the active site. In this study, we explore the MS signal as a function of nonpolar surface area (NPSA) in order to better understand this bias in electrospray response. The correlation between hydrophobicity and LC/MS response was evaluated and applied to study enzyme intermediates in polyketide synthases., Methods: Site occupancy methods were developed to study acyltransferase activity. To further evaluate these methods, several standard peptides containing one cysteine residue were modified with alkylation reagents of increasing hydrophobicity to study the MS signal as a function of NPSA., Results: A consistent trend in MS response was observed which is dependent on the NPSA of the analyte. An optimal NPSA zone was observed for the peptides studied., Conclusions: Nonpolar surface area can be used as metric to determine relative LC/MS response for peptides and evaluate site occupancy measurements., (Copyright © 2014 John Wiley & Sons, Ltd.)

Rationale: Unsaturated lipids play a crucial role in cellular processes as signaling factors, membrane building blocks or energy storage molecules. However, adequate mass spectrometry imaging of this diverse group of molecules remains challenging. In this study we implemented silver cationization for direct analysis by infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI) to enhance the ion abundances for olefinic lipids and facilitate peak assignment., Methods: Trace amounts of silver nitrate were doped into the electrospray solvent of an IR-MALDESI imaging source coupled to an Orbitrap mass analyzer. Calcifediol was examined as a model compound to demonstrate the effect of silver dopants on sensitivity and assay robustness. Dried human serum spots were subsequently analyzed to compare Ag-doped solvents with previously described solvent compositions. Mass differences as well as ion abundance ratio filters were employed to interpret results based on the characteristic isotopic pattern of silver., Results: Olefinic lipids were readily observed as silver adducts in IR-MALDESI analyses. Silver cationization decreased the limit of detection for calcifediol by at least one order of magnitude and was not affected in complex biological matrices. The ion abundance ratio and mass difference of [M + (107) Ag(+)](+) and [M + (109) Ag(+)](+) were successfully applied to facilitate the spectral assignment of silver adducts. Overall, silver cationization increased the analyte coverage in human serum by 43% compared with a standard IR-MALDESI approach., Conclusions: Silver cationization has been shown to enhance IR-MALDESI sensitivity and selectivity for unsaturated lipids, even when applied to complex samples. Increased compound coverage, enhanced robustness as well as the developed tools for peak assignment and mapping of isotopic patterns will clearly benefit future mass spectrometry imaging studies., (Copyright © 2014 John Wiley & Sons, Ltd.)

Rationale: Traditionally, free oligosaccharide internal standards are used to account for variability in glycan relative quantification experiments by mass spectrometry. However, a more suitable internal standard would be a glycoprotein, which could also control for enzymatic cleavage efficiency, allowing for more accurate quantitative experiments., Methods: Hydrophobic, hydrazide N-linked glycan reagents (both native and stable-isotope labeled) are used to derivatize and differentially label N-linked glycan samples for relative quantification, and the samples are analyzed by a reversed-phase liquid chromatography chip system coupled online to a Q-Exactive mass spectrometer. The inclusion of two internal standards, maltoheptaose (previously used) and horseradish peroxidase (HRP) (novel), is studied to demonstrate the effectiveness of using a glycoprotein as an internal standard in glycan relative quantification experiments., Results: HRP is a glycoprotein containing a xylosylated N-linked glycan, which is unique from mammalian N-linked glycans. Thus, the internal standard xylosylated glycan could be detected without interference to the sample. Additionally, it was shown that differences in cleavage efficiency can be detected by monitoring the HRP glycan. In a sample where cleavage efficiency variation is minimal, the HRP glycan performs as well as maltoheptaose., Conclusions: Because the HRP glycan performs as well as maltoheptaose but is also capable of correcting and accounting for cleavage variability, it is a more versatile internal standard and will be used in all subsequent biological studies. Because of the possible lot-to-lot variation of an enzyme, differences in biological matrix, and variable enzyme activity over time, it is a necessity to account for glycan cleavage variability in glycan relative quantification experiments., (Copyright © 2013 John Wiley & Sons, Ltd.)

Design of experiments (DOE) is a systematic and cost-effective approach to system optimization by which the effects of multiple parameters and parameter interactions on a given response can be measured in few experiments. Herein, we describe the use of statistical DOE to improve a few of the analytical figures of merit of the infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI) source for mass spectrometry. In a typical experiment, bovine cytochrome c was ionized via electrospray, and equine cytochrome c was desorbed and ionized by IR-MALDESI such that the ratio of equine:bovine was used as a measure of the ionization efficiency of IR-MALDESI. This response was used to rank the importance of seven source parameters including flow rate, laser fluence, laser repetition rate, ESI emitter to mass spectrometer inlet distance, sample stage height, sample plate voltage, and the sample to mass spectrometer inlet distance. A screening fractional factorial DOE was conducted to designate which of the seven parameters induced the greatest amount of change in the response. These important parameters (flow rate, stage height, sample to mass spectrometer inlet distance, and laser fluence) were then studied at higher resolution using a full factorial DOE to obtain the globally optimized combination of parameter settings. The optimum combination of settings was then compared with our previously determined settings to quantify the degree of improvement in detection limit. The limit of detection for the optimized conditions was approximately 10 attomoles compared with 100 femtomoles for the previous settings, which corresponds to a four orders of magnitude improvement in the detection limit of equine cytochrome c., (Copyright © 2011 John Wiley & Sons, Ltd.)

Protein quantification is one of the principal goals of mass spectrometry (MS)-based proteomics, and many strategies exist to achieve it. Several approaches involve the incorporation of a stable-isotope label using either chemical derivatization, enzymatically catalyzed incorporation of (18)O, or metabolic labeling in a cell or tissue culture. These techniques can be cost or time prohibitive or not amenable to the biological system of interest. Label-free techniques including those utilizing integrated ion abundance and spectral counting offer an alternative to stable-isotope-based methodologies. Herein, we present the comparison of stable-isotope labeling of amino acids in cell culture (SILAC) with spectral counting for the quantification of human embryonic stem cells as they differentiate toward the trophectoderm at three time points. Our spectral counting experimental strategy resulted in the identification of 2641 protein groups across three time points with an average sequence coverage of 30.3%, of which 1837 could be quantified with more than five spectral counts. SILAC quantification was able to identify 1369 protein groups with an average coverage of 24.7%, of which 1027 could be quantified across all time points. Within this context we further explore the capacity of each strategy for proteome coverage, variation in quantification, and the relative sensitivity of each technique to the detection of change in relative protein expression., (Copyright © 2011 John Wiley & Sons, Ltd.)

We present the implementation of a CO(2) laser emitting infrared laser irradiation at 10.6 microm onto the versatile atmospheric pressure ionization platform. Infrared laser desorption electrospray ionization (IR-LDESI) is demonstrated from liquid-state samples at atmospheric pressure with and without ESI postionization. Multiply charged proteins ranging in molecular mass from 8.6 to 17 kDa were detected from liquid-state samples without the addition of matrix., (Copyright (c) 2009 John Wiley & Sons, Ltd.)

We report a direct comparison of the mass measurement accuracies (MMAs) obtained on different mass spectrometry instrument types; a magnetic sector as the 'gold standard' and an electrospray ionization time-of-flight (ESI-TOF) instrument. Sixty samples, obtained from the Department of Chemistry at North Carolina State University, were analyzed on each instrument. Data are presented and compared between the different instruments. The average absolute MMAs achieved for the magnetic sector and Agilent ESI-TOF mass spectrometers were 3.0 and 1.1 ppm, respectively.

The performance characteristics (i.e., ion abundance and electrospray ion current) of a flared and blunt-ended heated metal capillary were evaluated with a voltage-assisted air amplifier on a linear ion trap mass spectrometer (LTQ-MS). The results demonstrated that a standard capillary afforded higher ion abundance than a flared capillary, thus further work is necessary to investigate conditions for which significant benefits with the flared capillary will be observed. The compatibility of a voltage-assisted air amplifier is explored for both types of capillaries and in all cases resulted in improved ion abundance and spray current., (Copyright (c) 2007 John Wiley & Sons, Ltd.)

Early studies of Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry (MS) explored many of the fundamental issues surrounding the potential of the technique to provide quantitative data. Improvements in instrument technology and the analysis of larger molecules in increasingly complex mixtures warrant not only a revisit to some of these earlier studies, but a more comprehensive examination of the influence of various instrument parameters on quantitative (absolute and relative) measurements in proteomics. We present a detailed examination of the role that acquisition time, excite voltage (i.e. excite radius), trapping voltage, and the type of excitation waveform have on the ability of FT-ICR to accurately quantify biological molecules. The use of a stable-isotope-labeled and unlabeled phenyl isocyanate derivatized peptide allows us to ascribe the effects of FT-ICR-MS on quantification, thus eliminating the contribution of ionization differences to ion abundance. To adequately assess the multiple parameters in the large dataset, we develop a multiplicative quality factor that encompasses the total ion abundance, as well as the accuracy and the precision of abundance ratios. This assessment allows facile determination of optimal instrument parameters for quantitative measurements., (Copyright (c) 2007 John Wiley & Sons, Ltd.)

Sample preparation techniques for carbohydrate analysis using matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) are explored, with particular emphasis on analyte/matrix co-crystallization procedures. While carbohydrates are known to prefer 2,5-dihydroxybenzoic acid (2,5-DHB) as the matrix of choice, these analytes are quite specific about matrix crystal structure, which in turn is dependent on the rate of drying of analyte/matrix spots on the MALDI target. With N-acetylglucosamine (GlcNAc) and N-acetylneuraminic acid (sialic acid or NeuAc) as test monosaccharides, significant increases in ion abundances are demonstrated with 2,5-DHB/NeuAc spots (>10-fold improvement) and 2,5-DHB/GlcNAc spots ( approximately 5-fold improvement) with active drying. The fine structure of crystals generated in active and passive drying was investigated using powder diffraction. Passively dried samples were shown to consist of an ordered polymorph, crystallizing in the space group P2(1)/a, while the actively dried samples produced a disordered phase crystallizing in the space group Pa. These data provide the wherewithal to engineer a matrix best suited for carbohydrate analyses., (Copyright (c) 2007 John Wiley & Sons, Ltd.)

We report the characterization of a recently introduced hybrid ionization source, matrix-assisted laser desorption electrospray ionization (MALDESI), coupled to a quadrupole Fourier transform ion cyclotron resonance mass spectrometry (QFT-ICR-MS) system. We first demonstrate the ability of MALDESI-QFT-ICR MS to directly analyze and provide high mass measurement accuracy (approximately 1 part-per-million) of a polypeptide using internal calibration. Second, we show the potential of MALDESI-QFT-ICR MS for the top-down characterization of multiply charged polypeptide cations. Finally, we demonstrate sub-femtomole detection limits in MALDESI-QFT-ICR MS using a combination of naturally occurring peptides and their respective stable isotope labeled forms. The results presented herein demonstrate the feasibility of several potential applications for MALDESI-QFT-ICR MS for the direct analysis of intact biological molecules., (Copyright (c) 2007 John Wiley & Sons, Ltd.)

We report the first coupling of a desorption electrospray ionization (DESI) ion source to Fourier transform ion cyclotron resonance mass spectrometry (ESI-FT-ICR-MS) for high-resolution protein analysis. The DESI FT-ICR-MS source design is described in detail along with preliminary data obtained on peptides and proteins ranging from 1 to 5.7 kDa., (Copyright 2006 John Wiley & Sons, Ltd.)

We report an evaluation of a modern Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) instrument to determine the general trend of post-excitation radius on total ion abundance, mass measurement accuracy, and isotopic distributions for internally calibrated mass spectra. The optimum post-excitation radius was determined using total ion abundance, mass measurement accuracy (MMA), and isotope ratios. However, despite the utility of internal calibration for achieving ultimate MMA, the internal calibrant ions were insufficient for compensating for sub-optimum ICR cell conditions. The findings presented herein underscore the importance of determining the optimal post-excitation radius in FT-ICR-MS to achieve high ion abundance (low limits of detection), high MMA, and valid isotopic distributions., (Copyright 2005 John Wiley & Sons, Ltd.)

The ability to detect protein variants and post-translational modifications by mass spectrometry has become increasingly important. Unfortunately, the ability to detect variants in large intact proteins (>80,000 Da) is limited. Even in the analysis of smaller proteins, algorithms are required to determine the presence of a 2 Da mass shift in an intact 13 kDa protein because the isotopic distribution of the multiply charged ions of the variant overlaps the wild-type distribution. Fortunately, most modern instruments are capable of detecting variants in tryptic peptides derived from intact proteins. If a single common variant protein is known, the presence of a variant tryptic peptide can be easily demonstrated. A more difficult issue is the case where a multiplicity of peptides with multiple amino acid substitutions can be associated with pathology. In these cases a decrease in the relative amount of a variant peptide relative to other internal tryptic fragments would be diagnostic. However, the variability associated with the analysis of in-gel or solution digests of proteins, related to efficiencies in digestion, extraction and ionization, confounds variant analysis at the peptide level. A strategy was developed to normalize for this variability by utilizing multiple isotopically labeled internal standards for multiple peptides derived from the same protein. Erythrocyte spectrin from 36 normal and 25 abnormal osmotic fragility samples was analyzed as a test case. Three isotopically labeled target peptides comprising the alpha/beta-spectrin self-association sites were added to purified digested alpha-spectrin. The utilization of multiple internal standards demonstrates the capability to normalize for sample variability due to ionization efficiency, solvent effects, digestion and extraction efficiency., (2005 John Wiley & Sons, Ltd.)

Electrospray ionization mass spectrometry (ESI-MS) is a powerful technique used for the identification and characterization of DNA polymorphisms. Continual improvement in instrument design assures high mass measurement accuracy, sensitivity, and resolving power. This work describes an eclectic array of enzymatic strategies we have invoked in order to detect single-nucleotide polymorphisms by ESI-MS, although other applications may be envisioned. One strategy combines the use of two enzymes, exonuclease III and lambda exonuclease, to provide a ladder of single-stranded DNA fragments for straightforward sequence identification by mass spectrometry. A second strategy combines restriction enzymes to screen for polymorphisms present within specific amplicons. Finally, we describe the use of stable-isotope-labeled nucleotides for the determination of length and base composition of a PCR product., (Copyright 2003 John Wiley & Sons, Ltd.)

The experimental determination of average mass by mass spectrometry is limited for large molecules due to the negative bias introduced by the natural distribution of isotopic abundances. This results in the measurement of the top-of-centroid (ToC) as opposed to the true centroid. We have developed a practical correction factor that is applied to the ToC measurement to largely remove the systematic bias introduced by nature. The correction factor is calculated easily using the average molecular mass (<100 kDa) of the analyte molecule and the full-width half maximum resolving power (<3,500) of the measurement. In addition, an approach to calculating resolving power is described that accurately predicts resolving power achievable for Fourier transform ion cyclotron resonance (FT-ICR) mass analysis of large molecules. A combination of internal calibration with a dual-electrospray source and application of the correction factor to average mass measurements improved the mass error from 192.5 to -35.0 ppm for a 44 kDa PCR amplicon., (Copyright 2003 John Wiley & Sons, Ltd.)

Skeletal and cardiac muscle contains actin isoforms that vary by two juxtaposed amino acids and two amino acid substitutions (Met299Leu and Ser358Thr). This close sequence homology does not allow cardiac and skeletal actin isoforms to be resolved in traditional SDS-PAGE analysis as the molecular weights (Deltamass = 32 Da) are not significantly different and the pIs are identical (5.2). Although cardiac actin is the predominant form in cardiac muscle, there appears to be a specific skeletal/cardiac actin ratio in a normal heart that may vary in a compromised or diseased heart. In an effort to ascertain the validity of this hypothesis we developed a mass spectrometric technique to measure the ratio of skeletal to cardiac actin. The technique involves purification of muscle actin and subsequent liquid chromatography coupled with electrospray ionization Fourier transform ion cylcotron resonance (LC/FTICR-MS) mass spectrometry. A 7 Tesla FTICR mass spectrometer was utilized to compare skeletal/cardiac actin isoform ratios. Additionally, a new dual electrospray ionization source was employed to determine accurate masses of the alpha-skeletal and alpha-cardiac actins., (Copyright 2003 John Wiley & Sons, Ltd.)

Characterizing polymerase chain reaction (PCR) amplicons has been accomplished for the first time using flow injection analysis coupled to electrospray ionization mass spectrometry (ESI-MS). The PCR amplicons were amplified at the human tyrosine hydroxylase short tandem repeat locus from an individual homozygotic for the 9.3 allele. One product was amplified using Pfu polymerase and yielded a blunt-ended amplicon of 82 base-pairs (bp) in length. The second PCR product was amplified using Taq polymerase that resulted in an amplicon with cohesive termini of 82 bp plus either mono- or diadenylation. The two PCR amplicons were alternatively injected using a 0.5-microL loop at 2 microM for the Pfu amplicon and 1 microM for the Taq amplicon with a flow rate of 200 nL/min during data acquisition. Both PCR amplicons were accurately identified using mass measurements illustrating the compatibility of ESI-MS for genotyping short tandem repeat sequences and the potential for high-throughput genotyping of large PCR amplicons., (Copyright 2001 John Wiley & Sons, Ltd.)

Electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICRMS) has been used to determine the mass of a double-stranded 500 base-pair (bp) polymerase chain reaction (PCR) product with an average theoretical mass of the blunt-ended (i.e. unadenylated) species of 308 859.35 Da. The PCR product was generated from the linearized bacteriophage Lambda genome which is a double-stranded template. Utilization of ethanol precipitation in tandem with a rapid microdialysis step to purify and desalt the PCR product was crucial to obtain a precise mass measurement. The PCR product (0.8 pmol/µL) was electrosprayed from a solution containing 75% acetonitrile, 25 mM piperidine, and 25 mM imidazole and was infused at a rate of 200 nL/min. The average molecular mass and the corresponding precision were determined using the charge-states ranging from 172 to 235 net negative charges. The experimental mass and corresponding precision (reported as the 95% confidence interval of the mean) was 309 406 +/- 27 Da (87 ppm). The mass accuracy was compromised due to the fact that the PCR generates multiple products when using Taq polymerase due to the non-template directed 3'-adenylation. This results in a mixture of three PCR products with nearly identical mass (i.e. blunt-ended, mono-adenylated and di-adenylated) with unknown relative abundances that were not resolved in the spectrum. Thus, the experimental mass will be a weighted average of the three species which, under our experimental conditions, reflects a nearly equal concentration of the mono- and di-adenylated species. This report demonstrates that precise mass measurements of PCR products up to 309 kDa (500 bp) can be routinely obtained by ESI-FTICR requiring low femtomole amounts. Copyright 1999 John Wiley & Sons, Ltd.

Accurate and precise determination of the number of repeats from a short tandem repeat (STR) sequence for a human gene locus is demonstrated for the first time by electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICR-MS). Specifically, the polymorphic human tyrosine hydroxylase (HUMTHO1) gene, a tetranucleotide STR forensic allele, was chosen as a model system to evaluate our approach for future characterization of both STRs and variable number of tandem repeats (VNTRs) by development of an ESI-FTICR-MS approach. The coding and noncoding strands from the HUMTHO1 9.3 allele are simultaneously resolved obtaining accurate (better than 70 ppm) average mass measurements of 25,783.23 and 24,754.55 Da for the coding and noncoding strands, respectively. The mass measurements are used to calculate the number of repeats for each strand, 'n', of 9.75169 and 9.75001 for the coding and noncoding strands, respectively. It will be shown how the value of 'n' can be used to directly determine the number of pure repeats and accurately determine the exact nature of the polymorphism within the repeat (if any). The single nucleotide deletion in the coding strand (adenine) and noncoding strand (thymine) were accurately identified using this approach. Interestingly, we observed the conversion of single-stranded to double-stranded DNA while the PCR product in the ESI buffer was being infused; the issues related to this observation will be presented. Previous results by other researchers investigating the HUMTHO1 9.3 allele using matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) are directly compared with our results. Our results indicate that ESI-FTICR-MS is a powerful approach to rapidly and accurately characterize tandem repeating sequences which will ultimately lead towards the understanding of a complex class of diseases and in human identity determination.

The analysis of polymerase chain reaction (PCR) products by electrospray ionization-Fourier transform ion cyclotron resonance mass spectrometry (ESI-FTICR) has been achieved. Specifically, a 105 base-pair nucleotide portion of the ribosomal spacer region was amplified in two members of the B. cereus group (i.e. B. thuringiensis and B. cereus) using PCR. These amplified regions were then analyzed by gel electrophoresis and ESI-FTICR. Based on the predicted sequence of the PCR products for each organism, the mass measurement using ESI-FTICR matched the theoretical mass within experimental error and was consistent with gel electrophoresis results. In contrast, for the typical several hour time-scale of the gel electrophoresis experiment, the mass spectrometric analysis was completed in a matter of minutes. To our knowledge, this constitutes the first report demonstrating the ionization and detection of a double-stranded PCR product by ESI-MS. This preliminary result indicates the potential use of ESI-MS to analyze PCR products on a rapid time-scale, with potential for medical and taxonomic applications.

The identification and simultaneous quantification of Tacrolimus and its hepatic metabolites in baboons has been achieved using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry and static secondary-ion mass spectrometry (TOF-SIMS). Little fragmentation, high sensitivity and tolerance to contamination are the major advantages of these methods, allowing facile identification and quantification of metabolites produced in vitro with minor analyte isolation. Based on the MALDI and TOF-SIMS results, seven metabolites have been identified: de-methylated, di de-methylated, hydroxylated, di hydroxylated, de-methylated hydroxylated, dihydrodiol, and di de-methylated hydroxylated. The concentrations of the parent drug and its major metabolites (e.g. de-methylated, di de-methylated) were measured using Rapamycin as an internal standard. The time course of Tacrolimus and its major metabolites as a function of incubation time was calculated. Good correlation between SIMS and MALDI results was obtained.