Search

The Dasuji giant porphyry molybdenum deposit is one of the largest ore deposits recently discovered along the Yinshan–Yanshan–Liaoning molybdenum belt in China. Using this deposit along the Yinshan–Yanshan–Liaoning molybdenum belt as the study area, the present study proposed a two-stage approach aimed at marking out the hydrothermally altered anomalies in the study area for the guidance of future prospecting in other regions. First of all, the Principal Component Analysis (PCA) and specific Band Ratio methods were applied to the ASTER images from different acquisition dates to extract ferric oxides and hydroxyl alterations related to the porphyry molybdenum deposit. Then, the Fractal-Aided Anomaly-Overlaying Selection model was adopted to recognize two ferric and hydroxyl alteration layers for separating anomalies from the interferences caused by geology and random noise from the data. Furthermore, for lithological differentiation in the previously marked off area, the Random Forest Classifier (RFC) was applied to the composite data obtained via the ASTER, ETM, and DEM, and it is demonstrated that the DEM can significantly improve lithological mapping in areas with complex vegetation cover and topography. Based on field verification and comparison with geological maps, the research revealed that the suggested two-stage approach may effectively reduce erroneously recognized anomalies produced during the first stage while retaining ore-related anomalies for gigantic porphyry molybdenum deposit prospecting in the Dasuji area, which showed the good application potential of the proposed model to extract actual hydrothermally altered anomalies adopted for lithological discrimination and mapping. [ABSTRACT FROM AUTHOR]

The increasing number of landslide hazards worldwide has placed greater demands on the production and updating of landslide inventory maps. As an important data source for landslide detection, interferometric synthetic aperture radar (InSAR) data processing is time-consuming and also requires specialized knowledge, which severely hinders its widespread application. At present, a new cloud-based online platform, i.e., Alaska Satellite Facility's Hybrid Pluggable Processing Pipeline (ASF HyP3) was developed for massive SAR data processing. In this study, combining the HyP3 online platform and Stacking-InSAR method, we constructed a new easy-to-use processing chain for rapidly identifying slow-moving landslides over large areas. With this processing chain, a total of 923 interferometric pairs covering an area of over 1800 km2 were processed within a few hours (about 4 to 5 h). A total of 81 slow-moving landslides were immediately detected and mapped using Stacking-InSAR method, of which 65 landslides were confirmed by previous studies and 16 landslides were newly detected. Results show that the new processing chain can greatly improve the efficiency of wide-area landslide mapping and is expected to serve as an effective tool for rapid updating the existing landslide inventories and contribute to the prevention and management of geological hazards. [ABSTRACT FROM AUTHOR]

Due to various factors such as urban development, climate change, and tectonic movements, landslides are a common geological phenomenon in the Qinghai–Tibet Plateau region, especially on both sides of a road, where large landslide hazards often result in traffic disruptions and casualties. Identifying the spatial distribution of landslides and monitoring their stability are essential for predicting landslide occurrence and implementing prevention measures. In this study, taking the Kangding-Batang section of Shanghai-Nyalam Road as the study area, we adopted a semi-automated time-series interferometric synthetic aperture radar (InSAR) method to identify landslides and monitor their activity. A total of 446 Sentinel-1 ascending and descending SAR images from January 2018 to December 2021 were thus collected and processed by using open-source InSAR processing software. After a series of error corrections, we obtained surface deformation maps covering the study area, and a total of 236 potential landslides were subsequently identified and classified into three categories, namely slow-sliding rockslides, debris flows, and debris avalanches, by combining deformation maps, optical images, and a digital elevation model (DEM). For a typical landslide, we performed deformation decomposition and analyzed the relationship between its deformation and rainfall, revealing the contribution of rainfall to the landslide. In addition, we discussed the effect of SAR geometric distortion on landslide detection, highlighting the importance of joint ascending and descending observations in mountainous areas. We analyzed the controlling factors of landslide distribution and found that topographic conditions are still the dominant factor. Our results may be beneficial for road maintenance and disaster mitigation. Moreover, the entire processing is semi-automated based on open-source tools or software, which provides a paradigm for landslide-related studies in other mountainous regions of the world. [ABSTRACT FROM AUTHOR]

In the context of global warming, the general increase in temperature has led to an increase in heatwave events, as well as a dramatic intensification of economic losses and social risks. This study employs the latest intensity–area–duration (IAD) framework that takes into account the temporal continuity and spatial dynamics of extreme events to identify regional heatwave events, and extracts key parameters of heatwave events to study the associated changes in frequency, intensity, influence area, and duration in seven geographic subregions of China in the 1979–2018 period. Heatwaves of all durations increased in frequency and intensity during the research period, with shorter heatwaves increasing in frequency and intensity at a faster rate than longer heatwaves. Among the seven geographic subregions, Xinjiang (XJ) and Southern China (SC) are the regions with the most frequent heatwave occurrence, while the Southwest (SW) and SC have the highest increase in heatwave frequency. In terms of regional distributions, XJ has the strongest heatwave event intensity and the largest affected area, while SC has the longest duration. However, in terms of spatial trends, SC, XJ, and the SW have the highest rates of intensity growth, influence area, and duration, respectively. In addition, heatwaves with extended durations and vast influence areas are more likely to occur in SC, and their frequency is on the rise. During the study period, the intensity, influence area, and length of heatwave occurrences in China exhibited an upward tendency, and it was shown that the longer the duration, the greater the intensity and the broader the influence area. In addition, the evolutionary characteristics of heatwave events with the longest duration indicate a certain consistency in their intensity and influence. These findings can contribute to the development of strategies to prepare for and mitigate the adverse effects of heatwave occurrences. [ABSTRACT FROM AUTHOR]

Influences of the increasing pressure of climate change and anthropogenic activities on wetlands ecosystems and agriculture are significant around the world. This paper assessed the spatiotemporal land use and land cover changes (LULCC), especially for conversion from marshland to other LULC types (e.g., croplands) over the Songnen and Sanjiang Plain (SNP and SJP), northeast China, during the past 35 years (1980-2015). The relative role of human activities and climatic changes in terms of their impacts on wetlands and agriculture dynamics were quantitatively distinguished and evaluated in different periods based on a seven-stage LULC dataset. Our results indicated that human activities, such as population expansion and socioeconomic development, and institutional policies related to wetlands and agriculture were the main driving forces for LULCC of the SJP and SNP during the past decades, while increasing contributions of climatic changes were also found. Furthermore, as few studies have identified which geographic regions are most at risk, how the future climate changes will spatially and temporally impact wetlands and agriculture, i.e., the suitability of wetlands and agriculture distributions under different future climate change scenarios, were predicted and analyzed using a habitat distribution model (Maxent) at the pixel-scale. The present findings can provide valuable references for policy makers on regional sustainability for food security, water resource rational management, agricultural planning and wetland protection as well as restoration of the region. [ABSTRACT FROM AUTHOR]

Discriminating between surface soil freeze/thaw states with the use of passive microwave brightness temperature has been an effective approach so far. However, soil moisture has a direct impact on the brightness temperature of passive microwave remote sensing, which may result in uncertainties in the widely used dual-index algorithm (DIA). In this study, an improved algorithm is proposed to identify the surface soil freeze/thaw states based on the original DIA in association with the AMSR-E and AMSR2 soil moisture products to avoid the impact of soil moisture on the brightness temperature derived from passive microwave remotely-sensed soil moisture products. The local variance of soil moisture (LVSM) with a 25-day interval was introduced into this algorithm as an effective indicator for selecting a threshold to update and modify the original DIA to identify surface soil freeze/thaw states. The improved algorithm was validated against in-situ observations of the Soil Moisture/Temperature Monitoring Network (SMTMN). The results suggest that the temporal and spatial variation characteristics of LVSM can significantly discriminate between surface soil freeze/thaw states. The overall discrimination accuracy of the improved algorithm was approximately 89% over a remote area near the town of Naqu on the East-Central Tibetan Plateau, which demonstrated an obvious improvement compared with the accuracy of 82% derived with the original DIA. More importantly, the correct classification rate for the modified pixels was over 96%. [ABSTRACT FROM AUTHOR]