Search

Smartphones with the Android operating system can acquire Global Navigation Satellite System (GNSS) raw pseudorange and carrier phase observations, which can provide a new way for the general public to obtain precise position information. However, only postprocessing precise orbit and clock offset products in some older smart devices are applied in current studies. The performances of precise point positioning (PPP) with the smartphone using real-time products and newly smartphones are still unrevealed, which is more valuable for real-time applications. This study investigates the observation data quality and multi-GNSS real-time PPP performance using recent smartphones. Firstly, the observed carrier-to-noise density ratio (C/N0), number of satellites and position dilution of precision (PDOP) of GNSS observations are evaluated. The results demonstrate that the C/N0 received by Huawei Mate40 is better than that of the Huawei P40 for GPS, BDS, QZSS and Galileo systems, while the GLONASS is poorer, and the PDOP of the Huawei P40 is slightly better than that of Mate40. Additionally, a comprehensive analysis of real-time precise orbit and clock offset products performance is conducted. The experiment result expresses that the orbit and clock offset performance of GPS and Galileo is better than that of BDS-3 and GLONASS, and BDS-2 is the worst. Finally, single- and dual-frequency multi-GNSS combined PPP experiments using observations received from smartphones and real-time products are conducted; the results indicate that the real-time static PPP using a smartphone can achieve decimeter-level positioning accuracy, and kinematic PPP can achieve meter-level positioning accuracy after convergence. [ABSTRACT FROM AUTHOR]

Real-time satellite clock offset is a crucial element for real-time precise point positioning (RT-PPP). However, the elapsed time for undifferenced (UD) multi-global navigation satellite system (GNSS) real-time satellite clock offset estimation at each epoch is increased with the growth of stations, which may fall short of real-time application requirements. Therefore, a rapid estimation method for UD multi-GNSS real-time satellite clock offset is proposed to improve the computation efficiency, in which both the dimension of the normal equation (NEQ) and the number of redundant observations are calculated before adjustment; if these two values are larger than the predefined thresholds, the elevation mask is gradually increased until they are less than the predefined thresholds. Then, the clock offset estimation is conducted; this method is called clock offset estimation using partial observations. Totals of 50, 60, 70 and 80 stations are applied to perform experiments. Compared to clock offset estimation using all observations, the elapsed times of clock offset estimation using partial observations can be reduced from 6.80 to 3.10 s, 7.93 to 2.97 s, 12.04 to 3.14 s for 60, 70 and 80 stations, respectively. By using the proposed method, the elapsed time of the clock offset estimation at each epoch is less than 5 s. The estimated clock offset accuracy for GPS, BDS-3, Galileo and GLONASS satellites are better than 0.04, 0.05, 0.03 and 0.16 ns when using the partial observations to estimate clock offset with 50, 60, 70 and 80 stations, respectively. For the multi-GNSS kinematic PPP using the estimated clock offset from 50, 60, 70 and 80 stations with partial observations, the positioning accuracy at 95% confidence level in the east, north and up direction are better than 2.70, 2.20 and 5.60 cm, respectively. [ABSTRACT FROM AUTHOR]