Search

Atmospheric water vapor is one of the important parameters for weather and climate studies. Generally, atmospheric water vapor can be monitored by some techniques, such as the Global Navigation Satellite System (GNSS), radiosonde (RS), remote sensing and numerical weather forecast (NWF). However, the comprehensive retrieval and application of precipitable water vapor (PWV) using multi techniques has been hardly performed before, which becomes the focus of this study. A comprehensive PWV retrieval and application platform (CPRAP) is first established by combing the ground-based (GNSS), space-based (Fengyun-3A, Sentinel-3A) and reanalysis-based (the fifth-generation reanalysis dataset of the European Centre for Medium-Range Weather Forecasting, ERA5) techniques. Additionally, its applications are then extended to drought and rainfall monitoring using the CPRAP-derived PWV. The statistical result shows that PWV derived from ground-based GNSS has high accuracy in China, with the root mean square (RMS), Bias and mean absolute error (MAE) of 2.15, 0.05 and 1.65 mm, respectively, when the RS-derived PWV is regarded as the reference. In addition, the accuracy of PWV derived from the space-based (FY-3A and Sentinel-3A) techniques technique is also validated and the RMS, Bias and MAE of a Medium Resolution Spectral Imager (MERSI) onboard Fengyun-3A (FY-3A) and an Ocean and Land Color Instrument (OLCI) onboard Sentinel-3A are 4.46/0.56/3.61 mm and 2.95/0.01/1.37 mm, respectively. Then, the performance of ERA5-derived PWV is evaluated based on GNSS-derived and RS-derived PWV. The result also shows good accuracy of ERA5-provided PWV with the averaged RMS, Bias and MAE of 1.86/0.11/1.48 mm and 0.90/−0.05/1.51 mm, respectively. Finally, the PWV data derived from the established CPRAP are further used for drought and rainfall monitoring. The applied results reveal that the calculated the standardized precipitation evapotranspiration index (SPEI) using the CPRAP-derived PWV can monitor the drought and the correlation coefficient ranges from 0.83 to 0.9 when compared with the SPEI. Furthermore, in this paper correlation analysis between PWV derived from the CPRAP and rainfall, and its potential for rainfall monitoring was also validated. Such results verify the significance of the established CPRAP for weather and climate studies. [ABSTRACT FROM AUTHOR]

Haiyang-2D (HY-2D) is the fourth satellite in the marine dynamic satellite series established by China. It was successfully launched on 19 May 2021, marking the era of the 3-satellite network in the marine dynamic environment satellite series of China. The satellite's precision orbit determination (POD) and validations are of great significance for ocean warning and marine altimetry missions. HY-2D is equipped with a laser reflector array (LRA), a satellite-borne Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS) receiver, and a satellite-borne dual-frequency GPS receiver named HY2 that was independently developed in China. In this paper, the quality of GPS data collected by the HY2 is analyzed based on indicators such as the multipath effect, cycle slips, and data completeness. The results suggest that the receiver can be used in POD missions involving low-Earth-orbit (LEO) satellites. The precise orbits of HY-2D are determined by the reduced-dynamics (RD) method. Apart from POD, validation of orbit accuracy is another important task for LEO POD. Therefore, two external validation methods are proposed, including carrier differential validation using one GPS satellite and inter-satellite differential validation using two GPS satellites. These are based on space-borne carrier-phase data, and the GPS satellites used for POD validation do not participate in orbit determination. The results of SLR range validation cannot illustrate the orbit accuracy in x, y, and z directions particularly, so to make validation results more intuitive, the SLR three-dimensional (3D) validation is proposed based on SLR range validation, and the RMSs in x, y, and z directions are 2.66, 3.32, and 2.69 cm, respectively. The results of SLR 3D validation are the same as those of SLR range validation, which proves that the new external validation method provided by SLR 3D is reliable. The RMSs of carrier differential validation and inter-satellite differential validation are 0.68 and 1.06 cm, respectively. The proposed validation methods are proved to be reliable. [ABSTRACT FROM AUTHOR]

Dalian Jinzhou Bay International Airport (DJBIA) is an offshore artificial island airport, where the reclaimed land is prone to uneven land subsidence due to filling consolidation and construction. Monitoring and predicting the subsidence are essential to assist the subsequent subsidence control and ensure the operational safety of DJBIA. However, the accurate monitoring and prediction of reclaimed subsidence for such a wide area under construction are hard and challenging. This paper utilized the Small Baseline Subset Synthetic Aperture Radar (SBAS-InSAR) technology based on Sentinel-1 images from 2017 to 2021 to obtain the subsidence over the land reclamation area of the DJBIA, in which the results from ascending and descending orbit data were compared to verify the reliability of the results. The SBAS-InSAR results reveal that uneven subsidence is continuously occurring, especially on the runway, terminal, and building area of the airport, with the maximum subsidence rate exceeding 100 mm/year. It was found that there is a strong correlation between the subsidence rate and backfilling time. This study provides important information on the reclaimed subsidence for DJBIA and demonstrates a novel method for reclaimed subsidence monitoring and prediction by integrating the advanced InSAR technology and Terzaghi Consolidation Theory modeling. Moreover, based on the Terzaghi consolidation theory and the corresponding geological parameters of the airport, predicted subsidence curves in this area are derived. The comparison between predicted curves and the actual subsidence revealed by InSAR in 2017–2021 is highly consistent, with a similar trend and falling in a range of ±25 mm/year, which verifies that the subsidence in this area conforms to Terzaghi Consolidation Theory. Therefore, it can be predicted that in the future, the subsidence rate of the new reclamation area in this region will reach about 80 mm/year ± 25 mm/year, and the subsidence rate will gradually slow down with the accumulation of reclamation time. The subsidence rate will slow down to about 30 mm/year ± 25 mm/year after 10 years. [ABSTRACT FROM AUTHOR]

Urbanization level is a key indicator for socioeconomic development and policy making, but the measurement data and methods need to be discussed further due to the limitation of a single index and the availability and accuracy of statistical data. China is urbanizing rapidly, but the urbanization level at the county scale remains a mystery due to its complexity and lack of unified and effective measurement indicators. In this paper, we proposed a new urbanization index to measure the Chinese urbanization level at the county scale by integrating population, land, and economic factors; by fusing remote sensing data and traditional demographic data, we investigated the multi-dimensional unbalanced development patterns and the driving mechanism from 1995 to 2015. Results indicate that: The average comprehensive urbanization level at the Chinese county scale has increased from 31.06% in 1995 to 45.23% in 2015, and the urbanization level in the permanent population may overestimate China's urbanization process. There were significant but different spatial and temporal dynamic patterns in population, land, and economic levels as well as at a comprehensive urbanization level. The comprehensive urbanization level shows the pattern of being high in the south-east and low in the north-west, divided by "Hu line". The urbanization of registered populations presents high in the northern border and the eastern coastal areas, which is further strengthened over time. Economic urbanization based on lighting data presents high in the east and low in the west. Land urbanization based on remote sensing data shows high in the south and low in the north. The registered population urbanization level is lower than economic and land urbanization. County urbanization was driven by large population size, reasonable industrial structure, and strong government capacity; 38% and 59% of urbanization levels can be regarded as the key nodes of the urbanization process. When the urbanization rate is lower than 38%, the secondary industry plays a strong role in powering urbanization; when the urbanization rate is higher than 38% but less than 59%, the promotion effect of the tertiary industry is more obvious, and the secondary industry is gradually weakened. When the urbanization rate exceeds 59%, the tertiary industry becomes the major driver. [ABSTRACT FROM AUTHOR]

The transformation of resource-exhausted urban land is an urgent problem for sustainable urban development in the world today. Obtaining the urban land use type and analyzing the changes in their land use can lead to better management of the relationship between economic development and resource utilization. In this paper, a residual-intelligent module network was proposed to solve the problems of low classification accuracy and missing objects edge information in traditional computer classification methods. The classification of four Landsat-TM/OLI images from 1993–2020 for Jiaozuo city (the first batch of resource-exhausted cities in China) was realized by this method. The results (overall accuracy was 98.61%, in 2020 images) were better than the comparison models (support vector machine, 2D-convolutional neural network, hybrid convolution networks; overall accuracy was 87.12%, 96.16%, 98.46%, respectively) and effectively reduced the loss of information on the edge of the ground objects. On this basis, six main land use types were constructed by combining field surveys and other methods. The characteristics and driving forces of spatial-temporal change in land use were explored from the aspect of social, economic and policy factors. The results showed that from 1993 to 2020 the cultivated land, forest land, water body and other land types in the study area decreased by 690.97 km2, 57.54 km2, 47.04 km2 and 59.43 km2, respectively. The construction land and bare land increased by 839.38 km2 and 15.57 km2, respectively. The transfer of land use types was mainly from cultivated land to construction land, with a cumulative conversion of 920.95 km2 within 27 years. The driving forces of land use in the study area were analyzed by principal component analysis (PCA) and regression analysis. The spatial-temporal evolution of land use types was affected by policy changes, the level of social development and the adjustment in the economy, industry and agriculture structure. The investment in fixed assets and per capita net income in rural areas were the top two influencing factors and their cumulative contribution rate was 94.62%. The findings of this study can provide scientific reference and theoretical support for land use planning, land reclamation in mining areas, ecological protection and sustainable development in Jiaozuo and other resource-exhausted cities in the world. [ABSTRACT FROM AUTHOR]

As clean, renewable energy, photovoltaic (PV) energy can reduce the ozone-layer loss and climate deterioration caused by the use of traditional types of energy to generate electricity. At present, most PV energy products involve the influence of cloud cover on solar radiation. However, the resolution and precision of most cloud cover data are not fine enough to reflect the actual cloud distribution in local areas. This leads to incorrect distribution results of PV energy in areas with high-spatial-variability clouds. Using high-resolution and high-precision cloud cover data obtained by satellite remote sensing to estimate the distribution of PV energy can solve this problem. In this study, the Global Land High-Resolution Cloud Climatology (GLHCC), a 10-day cloud frequency product with a resolution of 1 km and located in China, was used to construct a cloud-based solar radiation estimation model. Using the inverse relationship between cloud cover and solar radiation, the GLHCC was converted into sunshine percentage data. Using meteorological station data in China, a Least Squares Fit (LSF) and error check were carried out on the A-P, Lqbal, Bahel and Sen Models to determine the optimal solar radiation estimation model (Sen Model). Based on the sunshine percentage data, the Sen Model and terrain shielding factors, the distribution of PV energy in China was estimated. Finally, comparing to the Global Horizontal Irradiance (GHI) of the World Bank and the yearly average global irradiance of the Photovoltaic Geographic Information System (PVGIS), PV energy data in this paper more accurately reflected the distribution of PV energy in China, especially in areas with high-spatial-variability clouds. [ABSTRACT FROM AUTHOR]

Urban forms are closely related to the urban environment, providing great potential to analyze human socioeconomic activities. However, limited studies have investigated the impacts of three-dimensional (3-D) urban forms on socioeconomic activities across cities. In this paper, we explored the relationship between urban form and socioeconomic activities using 3-D building height data from 38 cities in China. First, we aggregated the building footprint data and calculated three building indicators at the grid scale, based on which the spatial patterns of building height and road density were analyzed. Then, we examined the capacities of two-dimensional (2D)/3D urban forms in characterizing socioeconomic activities using satellite-derived nighttime light (NTL) data. Finally, we analyzed the relationship between road density distributions and building heights across 38 cities in China. Our results suggest that the building height information can improve the correlation between urban form and NTL. Different patterns of road distribution were revealed according to the distribution of road density change from the building hotspots, showing the capacity of 3-D building height data in helping characterize socioeconomic activities. Our study indicates that the 3-D building height information is of great potential to support a variety of studies in urban domains, such as population distribution and carbon emissions, with significantly improved capacities. [ABSTRACT FROM AUTHOR]

Realistic modeling of high-resolution earth radiation signals in the visible-thermal spectral domain remains difficult, due to the complex radiation interdependence induced by the heterogeneous and rugged features of land surface. To find the trade-off between accuracy and efficiency for image simulation, this paper established a unified simulation framework for the entire visible-thermal spectral domain, based on the energy balance between solar-reflected and thermal radiation components over rugged surfaces. Considering the joint contributions of atmospheric and topographic adjacency effects, three spatial–spectral convolution kernels were uniformly designed to quantify the topographic irradiance, the trapping effect, and the atmospheric adjacency effect. Radiation signal simulation was implemented in three forms: land surface temperature (LST), bottom of atmosphere (BOA) radiance, and top of atmosphere (TOA) radiance. The accuracy was validated with onboard data from China's Gaofen-5 visual and infrared multispectral sensor (VIMS) over rugged desert. The simulation results demonstrate that the root mean square of relative deviations between the simulated and onboard TOA radiance are related to terrain, as 3–17% and 6–38% for the summer and winter scene, respectively. The evaluation of radiance components indicates the utility of the simulation framework to quantify the uncertainty associated with atmosphere and terrain coupling effects, in the sensor design and operation stages. [ABSTRACT FROM AUTHOR]

In this paper, we present a challenging stereo-inertial dataset collected onboard a sports utility vehicle (SUV) for the tasks of visual-inertial odometry (VIO), simultaneous localization and mapping (SLAM), autonomous driving, object detection, and other computer vision techniques. We recorded a large set of time-synchronized stereo image sequences (2 × 1280 × 720 @ 30 fps RGB) and corresponding inertial measurement unit (IMU) readings (400 Hz) from a Stereolabs ZED2 camera, along with centimeter-level-accurate six-degree-of-freedom ground truth (100 Hz) from a u-blox GNSS-IMU navigation device with real-time kinematic correction signals. The dataset comprises 34 sequences recorded during November 2020 in Wuhan, the largest city of Central China. Further, the dataset contains abundant unique urban scenes and features of a complex modern metropolis, which have rarely appeared in previously released benchmarks. Results from milestone VIO/SLAM algorithms reveal that methods exhibiting excellent performance on established datasets such as KITTI and EuRoC perform unsatisfactorily when moved outside the laboratory to the real world. We expect our dataset to reduce this limitation by providing more challenging and diverse scenarios to the research community. The full dataset with raw and calibrated data is publicly available along with a lightweight MATLAB/Python toolbox for preprocessing and evaluation. The dataset can be downloaded in its entirety from the uniform resource locator (URL) we provide in the main text. [ABSTRACT FROM AUTHOR]

The Zhurong rover of China's Tianwen-1 mission started its inspection tour on Mars in May 2021. As a major scientific payload onboard the Zhurong rover, the Mars Surface Composition Detector (MarSCoDe) instrument adopts laser-induced breakdown spectroscopy (LIBS) to detect and analyze the chemical composition of Martian materials. This paper introduces an experimental platform capable of establishing a simulated Martian atmospheric environment, in which a duplicate model of the MarSCoDe flight model is placed. In the simulated environment, the limit vacuum degree can reach 10−5 Pa level, the temperature can change from −190 °C to +180 °C, and different gases can be filled and mixed according to desired proportion. Moreover, the sample stage can move along a track inside the vacuum chamber, enabling the detection distance to vary from 1.5 m to 7 m. Preliminary experimental results indicate that this platform is able to simulate the scenario of MarSCoDe in situ LIBS detection on Mars well. [ABSTRACT FROM AUTHOR]

The southwest mountainous area of China is one of the areas with the most landslides in the world. In this paper, we used Ya'an City and Garzê Tibetan Autonomous Prefecture in Sichuan Province as the research areas to explore the identification application effects of large-area potential landslides using synthetic aperture radar (SAR) data with different wavelength types (Sentinel-1, ALOS-2), different processing methods (SBAS-InSAR, Stacking-InSAR), and different geological environmental conditions. The results show the following: (1) The effect of identifying landslides with different slope directions is largely affected by the satellite orbit direction; when we identify landslide hazards across a large area, the joint monitoring mode of ascending and descending orbit data is required. (2) The period of monitoring affects the identification effect of potential landslides when landslide identification is carried out in southwestern China; the InSAR monitoring period is recommended to be more than 2 years. (3) In different geological environmental regions, SBAS technology and Stacking technology have their own advantages; Stacking technology identifies more potential landslides, and SBAS technology identifies potential landslides with higher accuracy; (4) the degree of vegetation coverage has a great impact on the landslide identification effect of different SAR data sources. In low-density vegetation coverage areas, the landslide identification result using Sentinel-1 data seems to be better than the result using ALOS-2 data. In high-density vegetation coverage areas, the landslide identification result using ALOS-2 data is better than that using Sentinel-1 data. [ABSTRACT FROM AUTHOR]

Net ecosystem productivity (NEP) plays an important role in understanding ecosystem function and the global carbon cycle. In this paper, the key parameters of the Carnegie Ames Stanford Approach (CASA) model, maximum light use efficiency (εmax), was optimized by using vegetation classification data. Then, the NEP was estimated by coupling the optimized CASA model, geostatistical model of soil respiration (GSMSR) and the soil respiration–soil heterotrophic respiration (Rs-Rh) relationship model. The ground observations from ChinaFLUX were used to verify the NEP estimation accuracy. The results showed that the R2 of the optimized CASA model increased from 0.411 to 0.774, and RMSE decreased from 21.425 gC·m−2·month−1 to 12.045 gC·m−2·month−1, indicating that optimizing CASA model by vegetation classification data was an effective method to improve the estimation accuracy of NEP. On this basis, the spatial and temporal distribution of NEP in China was analyzed. The research indicated that the monthly variation of NEP in China was a single peak curve with summer as the peak, which generally presented the pattern of southern region > northern region > Qinghai–Tibet region > northwest region. Furthermore, from 2001 to 2016, most regions of China showed a non-significant level upward trend, but main cropland (e.g., North China Plain and Northeast Plain) and some grassland (e.g., Ngari in Qinghai–Tibet Plateau and Xilin Gol League in Inner Mongolia) showed a non-significant-level downward trend. The study can deepen the understanding of the distribution of carbon sources/sinks in China, and provide a reference for regional carbon cycle research. [ABSTRACT FROM AUTHOR]

Land use/cover change has become an indispensable part of global eco-environmental change research. The Tarim River Basin is the largest inland river basin in China. It is also one of the most ecologically fragile areas in the country, with greening and desertification processes coexisting. This paper analyzes the evolution of land-use/cover change in the Tarim River Basin over the past 30 years based on remote sensing data. The research also explores the contribution of conversion between different land types to the ecological environment by selecting methods, such as transfer matrix and ecological contribution rate. Results indicate that grassland and barren land are the main land types in the region, accounting for 72.46% and 18.87% of the basin area, respectively. From 1990 to 2019, cropland area increased from 33,585.89 km2 to 52,436.40 km2, an increase of 56.13%, while barren land areas decreased from 781,380.57 km2 to 760,783.29 km2. Most of the land-use conversion was grassland to other land types and other land types to barren land. Since 1990, the conversion of barren land to grassland and cropland in the basin has led to ecological improvement, whereas the conversion of grassland to cropland has caused deterioration, but with a generally improving trend. It is anticipated that, over the next decade, changes in land types will involve increases in grassland and woodland area, decreases in barren land and cropland, and an overall improvement in the ecological environment in the watershed. Since agriculture and animal husbandry are the main industries in the Tarim River Basin and the land-use structure is dominated by cropland and grassland, several key measures should be implemented. These include improving land use, rationalizing the use of water and soil resources, slowing down the expansion of cropland, and alleviating the contradiction between humans and land, with the ultimate aim of achieving sustainable development of the social economy and ecological environment. [ABSTRACT FROM AUTHOR]

Natural disaster response and assessment are key elements of natural hazard monitoring and risk management. Currently, the existing systems are not able to meet the specific needs of many regional stakeholders worldwide; traditional approaches with field surveys are labor-intensive, time-consuming, and expensive, especially for severe disasters that affect a large geographic area. Recent studies have demonstrated that Earth observation (EO) data and technologies provide powerful support for the natural disaster emergency response. However, challenges still exist in support of the entire disaster lifecycle—preparedness, response, and recovery—which build the gaps between the disaster Spatial Data Infrastructure (SDI) already-in-place requirements and the EO capabilities. In order to tackle some of the above challenges, this paper demonstrates how to facilitate typhoon-triggered flood disaster-ready information delivery using an SDI services approach, and proposes a web-based remote sensing disaster decision support system to facilitate natural disaster response and impact assessment, which implements on-demand disaster resource acquisition, on-the-fly analysis, automatic thematic mapping, and decision report release. The system has been implemented with open specifications to facilitate interoperability. The typhoons and floods in Hainan Province, China, are used as typical scenarios to verify the system's applicability and effectiveness. The system improves the automation level of the natural disaster emergency response service, and provides technical support for regional remote-sensing-based disaster mitigation in China. [ABSTRACT FROM AUTHOR]

Extraterrestrial solar radiation (ESR) is the essential basic background for solar radiation, which determines the occurrence of the weather and atmospheric phenomena. Since the influence of ESR variation on actual rugged terrain is a diverse, complex, and dynamic process, simulating ESR over a large spatial-temporal span, especially with a high-resolution digital elevation model (DEM), is a significant challenge. In this paper, we developed a new scheme for simulating ESR over the entirety of China using a DEM with a resolution of 30 m. To fully consider regional terrain status, the feature variables used were elevation, slope, and aspects of the located grid and the surrounding four grids to reveal the topography. In addition, latitude was used as a feature variable to consider the geographical location, and the month number was used to consider the duration. On the basis of different geographical locations, the training dataset was established from 20,000 grids. With the feature variable composition and training dataset, a backpropagation artificial neural network (BP ANN) was found to have the best performance compared with the other three machine learning methods in simulating ESR for a DEM. In terms of the proposed scheme and BP ANN, we drew an ESR map of China with a resolution of 30 m. The determination coefficient of the simulation result achieved 0.99 and the root-mean-square error was less than 50 MJ/m2 in all sample areas, confirming its remarkable accuracy. In terms of efficiency, the time consumption of ESR simulated using the proposed scheme shrinks over 150 times in all sample areas compared to that simulated via the theoretical model. Simultaneously, the developed scheme was also used to simulate an ESR for a DEM with a resolution of 90 m to verify the universality and robustness of the developed scheme. In addition, we used the proposed scheme to derive the direct solar radiation and global solar radiation, thereby further proving the reliability and applicability of our study. Overall, our work convincingly proved that the proposed scheme is a potential and effective approach for quickly simulating ESR with high accuracy. This study provides the basis for different solar radiation inversions of long time series and large spatial scales, offering additional insights for simulating ESR on a large spatial-temporal span. [ABSTRACT FROM AUTHOR]

Landslides, a major natural geohazard, obstruct municipal constructions and may destroy villages and towns, at worst causing significant casualties and economic losses. Interferometric Synthetic Aperture Radar (InSAR) technique offers distinct advantages on landslide detection and monitoring. In this paper, a more systematic workflow is designed for InSAR study of landslides, in terms of three levels: (i) early detection on regional scale, (ii) three-dimensional (3D) surface displacement rates estimation on detailed scale, and (iii) time series analysis on long-term temporal scale. The proposed workflow is applied for landslide research on the Xiaojiang River Basin, China, using ascending and descending Sentinel-1 images acquired from March 2017 to May 2019. First, the landslide inventory has been mapped and updated using InSAR stacking method, supporting geohazard prevention on a regional scale. A total of 22 active landslides are identified, ranging from medium to super large scale. Compared with the existing inventory, three unrecorded landslides are newly detected by our approach, and five recorded landslides are detected significant expansion of their boundaries. Then, specific to a detected landslide, Baobao landslide, a Total Least Squares–Kalman Filter-based approach is presented. Two outcomes are provided for further spatial-temporal pattern analysis: 3D displacement rates, providing an intuitive insight on the spatial characteristics and sliding direction of landslide, which are analyzed to deep the understanding of its kinematic mechanism, and long-term time series, which contribute to deduce the dynamic evolution of landslide, presenting benefits in landslide forecasting. [ABSTRACT FROM AUTHOR]

The GF-7 satellite is China's first civil sub-meter resolution stereo mapping satellite, aiming at 1:10,000-scale mapping. To achieve this goal, apart from the stereo optical cameras that reach sub-meter resolution, the GF-7 satellite is equipped with a laser altimetry system capable of obtaining three-dimensional laser points (LPs) with high elevation accuracy. However, the combination of laser altimetry data and optical stereo images has not been thoroughly studied. In this paper, we exploit the images recorded by the highly integrated laser footprint cameras and propose a hierarchical phase correlation method based on a geographic pyramid for the registration of laser altimetry data and high-resolution optical stereo images, which lays a solid foundation for the following combined adjustment. Experiments show that the proposed registration method can automatically locate the LPs on high-resolution stereo images and meet the requirements of bundle adjustment. A series of bundle adjustment experiments were carried out, showing that laser altimetry data can significantly enhance the vertical accuracy of optical image stereo mapping and that elevation accuracy can reach roughly 1.0 m (RSME) without ground control points. Therefore, this study could be a good guide for global high-precision DSM acquisition with the GF-7 satellite. [ABSTRACT FROM AUTHOR]

A unified height datum is essential for global geographic information resource construction, ecological environment protection, and scientific research. The goal of this paper is to derive the geopotential value for the Chinese height datum (CNHD) in order to realize the height datum unification in China. The estimation of height datum geopotential value usually depends on high-precision global gravity field models (GFMs). The satellite gravity missions of the Gravity Recovery and Climate Experiment (GRACE) and Gravity field and steady-state Ocean Circulation Exploration (GOCE) provide high-accuracy, medium–long-wavelength gravity field spectra, but satellite-only GFMs are limited to medium–long wavelengths, which will involve omission errors. To compensate for the omission errors in satellite-only GFMs, a spectral expansion approach is used to obtain the refined gravity field models using the EGM2008 (Earth Gravitational Model 2008) and residual terrain model (RTM) technique. The refined GFMs are evaluated by using high-quality GNSS/leveling data, the results show that the quasi-geoid accuracy of the refined DIR_R6_EGM2008_RTM model in China has optimal accuracy and, compared with the EGM2008 model and the DIR_R6 model, this refined model in China is improved by 9.6 cm and 21.8 cm, and the improvement ranges are 35.7% and 55.8%, respectively. Finally, the geopotential value of the Chinese height datum is estimated to be equal to 62,636,853.29 m2s−2 with respect to the global reference level defined by W0 = 62,636,853.4 m2s−2 by utilizing the refined DIR_R6_EGM2008_RTM model and 1908 high-quality GNSS/leveling datapoints. [ABSTRACT FROM AUTHOR]

The topographic skeleton is the primary expression and intuitive understanding of topographic relief. This study integrated a topographic skeleton into deep learning for terrain reconstruction. Firstly, a topographic skeleton, such as valley, ridge, and gully lines, was extracted from a global digital elevation model (GDEM) and Google Earth Image (GEI). Then, the Conditional Generative Adversarial Network (CGAN) was used to learn the elevation sequence information between the topographic skeleton and high-precision 5 m DEMs. Thirdly, different combinations of topographic skeletons extracted from 5 m, 12.5 m, and 30 m DEMs and a 1 m GEI were compared for reconstructing 5 m DEMs. The results show the following: (1) from the perspective of the visual effect, the 5 m DEMs generated with the three combinations (5 m DEM + 1 m GEI, 12.5 m DEM + 1 m GEI, and 30 m DEM + 1 m GEI) were all similar to the original 5 m DEM (reference data), which provides a markedly increased level of terrain detail information when compared to the traditional interpolation methods; (2) from the perspective of elevation accuracy, the 5 m DEMs reconstructed by the three combinations have a high correlation (>0.9) with the reference data, while the vertical accuracy of the 12.5 m DEM + 1 m GEI combination is obviously higher than that of the 30 m DEM + 1 m GEI combination; and (3) from the perspective of topographic factors, the distribution trends of the reconstructed 5 m DEMs are all close to the reference data in terms of the extracted slope and aspect. This study enhances the quality of open-source DEMs and introduces innovative ideas for producing high-precision DEMs. Among the three combinations, we recommend the 12.5 m DEM + 1 m GEI combination for DEM reconstruction due to its relative high accuracy and open access. In regions where a field survey of high-precision DEMs is difficult, open-source DEMs combined with GEI can be used in high-precision DEM reconstruction. [ABSTRACT FROM AUTHOR]

The Qinghai–Tibet Plateau is one of the regions with the highest snow accumulation in China. Although the Fengyun-4A (FY4A) satellite is capable of monitoring snow-covered areas in real time and on a wide scale at high temporal resolution, its spatial resolution is low. In this study, the Qinghai–Tibet Plateau, which has a harsh climate with few meteorological stations, was selected as the study area. We propose a deep learning model called the Dual-Branch Super-Resolution Semantic Segmentation Network (DSRSS-Net), in which one branch focuses with super resolution to obtain high-resolution snow distributions and the other branch carries out semantic segmentation to achieve accurate snow recognition. An edge enhancement module and coordinated attention mechanism were introduced into the network to improve the classification performance and edge segmentation effect for cloud versus snow. Multi-task loss is also used for optimization, including feature affinity loss and edge loss, to obtain fine structural information and improve edge segmentation. The 1 km resolution image obtained by coupling bands 1, 2, and 3; the 2 km resolution image obtained by coupling bands 4, 5, and 6; and the 500 m resolution image for a single channel, band 2, were inputted into the model for training. The accuracy of this model was verified using ground-based meteorological station data. Snow classification accuracy, false detection rate, and total classification accuracy were compared with the MOD10A1 snow product. The results show that, compared with MOD10A1, the snow classification accuracy and the average total accuracy of DSRSS-Net improved by 4.45% and 5.1%, respectively. The proposed method effectively reduces the misidentification of clouds and snow, has higher classification accuracy, and effectively improves the spatial resolution of FY-4A satellite snow cover products. [ABSTRACT FROM AUTHOR]

This research examines the correlation between seismic activity and variations in ionospheric electron density (Ne) using the data from the Langmuir probe (LAP) onboard the China Seismo-Electromagnetic Satellite (CSES) during nighttime. Statistical analysis of Ms ≥ 6.8 earthquakes that occurred globally between August 2018 and March 2023 is conducted, as well as Ms ≥ 6.0 earthquakes in China during the same period, using the quartile analysis method for fixed revisiting orbits. The main conclusions are that: (1) the larger the magnitude of the earthquake, the more anomalous the phenomena that appear; (2) the anomalies on the east side of the epicenter are significantly higher than those on the west side, and the anomalies in the Northern Hemisphere are mostly distributed southward from the epicenter, while those in the Southern Hemisphere are mostly distributed northward from the epicenter; (3) anomalies appear with a higher frequency on several specific time intervals, including the day of the earthquake (likely co-seismic effect) and 2, 7, and 11 days before the earthquake (possible precursor candidates); and (4) for the 15 earthquakes of Ms ≥ 6.0 in China over the past five years, anomalous Ne mainly occurred southwest of the epicenter, with the highest frequency observed 5 days before the earthquake, and there were continuous anomalous phenomena between 9 days and 5 days before the earthquake. This study concludes that Ne, measured by CSES, can play a fundamental role in studying earthquake-related ionospheric disturbances. [ABSTRACT FROM AUTHOR]

Ecosystem services (ESs) are crucial for sustainable development, as they impact human well-being. However, changes in land use/land cover (LULC) caused by climate change and social development can negatively affect ESs, particularly in arid river basins. This study focuses on current and future changes in LULC in the Kaxghar River Basin (KRB) in Xinjiang, China, to determine how these changes will affect the region's ESs. The integrated PLUS-InVEST model was used to investigate the spatiotemporal distribution and changing patterns of habitat quality (HQ) and carbon storage (CS) under the natural increase scenario (NIS), economic development scenario (EDS), and water protection scenario (WPS). Additionally, the Ecosystem Service Contribution Index (ESCI) was also calculated to evaluate the contribution of LULC changes to ESs. The results show the following: (1) from 2000 to 2020, the average value of HQ in the KRB gradually decreased from 0.54 to 0.49 and CS trended slightly upward, with a total increase of 0.07 × 106 t. Furthermore, the changes in CS were highly consistent with changes in LULC. (2) From 2020 to 2030, the area of low-grade (0–0.2) HQ saw a continuous increase, with the fastest growth occurring in 2030 under the EDS. Meanwhile, under the WPS, HQ significantly improved, expanding by 1238 km2 in area. Total CS under the three test scenarios tended to decline, with the NIS showing the smallest decrease. (3) The expansion of cropland and unused land had a negative impact on ESs, particularly on CS, whereas the conversion to grassland and forestland had a significant positive impact. In conclusion, these insights will enrich our understanding of ESs in the study area and contribute to balancing the relationship between ecological conservation and socioeconomic development in the Kaxghar River Basin, as well as in other parts of China's arid Northwest and similar regions around the world. [ABSTRACT FROM AUTHOR]

The ocean front has a non-negligible role in global ocean–atmosphere interactions, marine fishery production, and the marine military. Hence, obtaining the positions of the ocean front is crucial in oceanic research. At present, the positioning method of recognizing an ocean front has achieved a breakthrough in the mean dice similarity coefficient (mDSC) of above 90%, but it is difficult to use to achieve rapid extraction in emergency scenarios, including marine fisheries and search and rescue. To reduce the its dependence on machines and apply it to more requirements, according to the characteristics of an ocean front, a multi-scale model SQNet (Simple and Quick Net) dedicated to ocean front position recognition is designed, and its perception domain is expanded while obtaining current scale data. In experiments along the coast of China and the waters of the Gulf of Mexico, it was not difficult to find that SQNet exceedingly reduced running time while ensuring high-precision results (mDSC of higher than 90%). Then, after conducting intra-model self-comparison, it was determined that expanding the perceptual domain and changing the weight ratio of the loss function could improve the accuracy and operational efficiency of the model, which could be better applied in ocean front recognition. [ABSTRACT FROM AUTHOR]

Drought poses a serious threat to agricultural production and food security in the context of global climate change. Few studies have explored the response mechanism and lag time of agricultural drought to meteorological drought from the perspective of cultivated land types. This paper analyzes the spatiotemporal evolution patterns and hysteresis relationship of meteorological and agricultural droughts in the middle and lower reaches of the Yangtze River in China. Here, the Moderate Resolution Imaging Spectroradiometer (MODIS) vegetation index products and surface temperature products were selected to calculate the Temperature Vegetation Dryness Index (TVDI) from 2010 to 2015. Furthermore, we obtained the Standardized Precipitation Evapotranspiration Index (SPEI) and the Palmer Drought Severity Index (PDSI) for the same period. Based on these indices, we analyzed the correlation and the hysteresis relationship between agricultural and meteorological drought in rainfed and irrigated arable land. The results showed that, (1) compared with SPEI, the high spatial resolution PDSI data were deemed more suitable for the subsequent accurate and scientific analysis of the relationship between meteorological and agricultural droughts. (2) When meteorological drought occurs, irrigated arable land is the first to experience agricultural drought, and then alleviates when the drought is most severe in rainfed arable land, indicating that irrigated arable land is more sensitive to drought events when exposed to the same degree of drought risk. However, rainfed arable land is actually more susceptible to agricultural drought due to the intervention of irrigation measures. (3) According to the cross-wavelet transform analysis, agricultural droughts significantly lag behind meteorological droughts by about 33 days during the development process of drought events. (4) The spatial distribution of the correlation coefficient between the PDSI and TVDI shows that the area with negative correlations of rainfed croplands and the area with positive correlations of irrigated croplands account for 77.55% and 68.04% of cropland areas, respectively. This study clarifies and distinguishes the details of the meteorological-to-agricultural drought relationship in rainfed and irrigated arable land, noting that an accurate lag time can provide useful guidance for drought monitoring management and irrigation project planning in the middle and lower reaches of the Yangtze River. [ABSTRACT FROM AUTHOR]

On 14 December 2013 (UTC), China's Chang'E-3 (CE-3) succeeded in landing on the Moon's surface. The CE-3 landing site is in northern Mare Imbrium and several tens of meters away from the rim of a young crater with a few hundred meters in diameter. In-situ measurements of lunar soil around the roving area were conducted from Active Particle-induced X-ray Spectrometer (APXS) onboard Yutu rover. Three relatively young lunar soil samples in the CE-3 landing site were investigated. Previous studies suggested that these samples are a new type of basalt, not discovered yet in previous missions before the CE-3 in-situ measurements. It plays an essential role in promoting the understanding of lunar volcanic history. However, their results are deviated, and thus scrutinizing the data as per our optimized model to derive a more precise result is of necessity. In this paper, we present an optimized model for data analysis based on APXS measurements to derive the major elements concentrations. The optimized model has the advantages of reliability and being independent of calibration by ground standards. The particle size effect is applied in lunar X-ray fluorescence modeling for correction, improving the accuracy in determining the elemental concentrations for the actual measurement. Our results are distinct in the correlation plots by carrying out a comparison with previous lunar regolith samples from Apollo, Luna, and Chang'E-5 missions, indicating that the CE-3 landing site is a new region apart from previous in-situ or laboratory detection prior to the CE-3 measurements. It suggests a kind of young mare basalt with unusual petrological characteristics compared with previous samples and similar geochemical properties of CE-3 landing site and western Procellarum and Imbrium (WPI), with a signature of western Procellarum. [ABSTRACT FROM AUTHOR]

Unregulated livestock breeding and grazing can degrade grasslands and damage the ecological environment. The combination of remote sensing and artificial intelligence techniques is a more convenient and powerful means to acquire livestock information in a large area than traditional manual ground investigation. As a mainstream remote sensing platform, unmanned aerial vehicles (UAVs) can obtain high-resolution optical images to detect grazing livestock in grassland. However, grazing livestock objects in UAV images usually occupy very few pixels and tend to gather together, which makes them difficult to detect and count automatically. This paper proposes the GLDM (grazing livestock detection model), a lightweight and high-accuracy deep-learning model, for detecting grazing livestock in UAV images. The enhanced CSPDarknet (ECSP) and weighted aggregate feature re-extraction pyramid modules (WAFR) are constructed to improve the performance based on the YOLOX-nano network scheme. The dataset of different grazing livestock (12,901 instances) for deep learning was made from UAV images in the Hadatu Pasture of Hulunbuir, Inner Mongolia, China. The results show that the proposed method achieves a higher comprehensive detection precision than mainstream object detection models and has an advantage in model size. The m A P of the proposed method is 86.47%, with the model parameter 5.7 M. The average recall and average precision can be above 85% at the same time. The counting accuracy of grazing livestock in the testing dataset, when converted to a unified sheep unit, reached 99%. The scale applicability of the model is also discussed, and the GLDM could perform well with the image resolution varying from 2.5 to 10 cm. The proposed method, the GLDM, was better for detecting grassland grazing livestock in UAV images, combining remote sensing, AI, and grassland ecological applications with broad application prospects. [ABSTRACT FROM AUTHOR]

Landslide susceptibility assessment is an important means of helping to reduce and manage landslide risk. The existing studies, however, fail to examine the spatially varying relationships between landslide susceptibility and its explanatory factors. This paper investigates the spatial variation in such relationships in Liangshan, China, leveraging a spatially explicit model, namely, geographical random forest (GRF). By comparing with random forest (RF), we found that GRF achieves a higher performance with an AUC of 0.86 due to its consideration of the spatial heterogeneity among variables. GRF also provides a higher-quality landslide susceptibility map than RF by correctly placing 92.35% of the landslide points in high-susceptibility areas. The local feature importance derived from GRF allows us to understand that the impact of conditioning factors varies across space, which can provide implications for policy development by local governments to place different levels of attention on different conditioning factors in specific counties to prevent and mitigate landslides. To account for the spatial dependence among the data in the model performance assessment, we use spatial cross-validation (CV) to split the data into subsets spatially rather than randomly for model training and testing. The results show that spatial CV can effectively address the over-optimistic bias in model error evaluation. [ABSTRACT FROM AUTHOR]

As the Global Navigation Satellite System (GNSS) is widely used in all walks of life, the signal structure of satellite navigation is open, and the vulnerability to spoofing attacks is also becoming increasingly prominent, which will seriously affect the credibility of navigation, positioning, and timing (PNT) services. Satellite navigation signal authentication technology is an emerging technical means of improving civil signal anti-spoofing on the satellite navigation system side, and it is also an important development direction and research focus of the GNSS. China plans to carry out the design and development of the next-generation Beidou navigation satellite system (BDS), and one of its core goals is to provide more secure and credible PNT services. This paper first expounds on the principles and technical architecture of satellite navigation signal authentication, then clarifies the development history of satellite navigation signal authentication, and finally proposes the BDS authentication service system architecture. It will provide technical support for the construction and development of the follow-up Beidou authentication service. [ABSTRACT FROM AUTHOR]

In response to uncertainty in remotely sensed land cover products, there is continuing research on accuracy assessment and analysis. Given reference sample data, accuracy indicators are commonly estimated based on error matrices, from which areal extents of different cover types are also estimated. There are merits to explore the ways utilities of land cover products may be further enhanced beyond map face values and conventional area estimation. This paper presents an integrative method (CCAErrMat) for uncertainty characterization and utility enhancement. This works through reference-map cover type co-occurrence analyses based on error matrices localized in canonical correspondence analysis (CCA) ordination space rather than in geographic space to overcome the sparsity of reference sample data. The aforementioned co-occurrence analyses facilitate quantification of accuracy indicators, identification of correctly classified and perfectly misclassified pixels, and prediction of reference class probabilities, all at individual pixels. Moreover, these predicted reference class probabilities are used as auxiliary variables to formulate model-assisted area estimation, further enhancing map utilities. Extensions to CCAErrMat are also investigated as a way to bypass the pre-computing of map class occurrence pattern indices as candidate explanatory variables for CCAErrMat, leading to two variant methods: CCACCAErrMat and CNNCCAErrMat. A case study based in Wuhan municipality, central China was undertaken to compare the proposed method against alternative methods, including CCA-separate and CNN-separate. The advantages of CCAErrMat and CCACCAErrMat were confirmed. The proposed method is recommendable for characterizing uncertainty and enhancing utilities in land cover maps by analyzing locally constrained error matrices. The method is also cost-effective in terms of reference sample data, as requirements for them are similar to those for conventional accuracy assessments. [ABSTRACT FROM AUTHOR]

The regions near the Tropic of Cancer are a latitudinal geographical zone with typical climatic, topographic, and human landscape features. It is necessary to explore the region's net primary productivity (NPP) dynamics as it combines complex topography, various vegetation types, and intense human activities. The study sets the transect near the Tropic of Cancer (TCT) and uses the Carnegie–Ames–Stanford (CASA) model to estimate the NPP from 2000 to 2020. After using the RESTREND method, the paper calculates and compares the relative contributions of climate variability and anthropogenic activities to NPP changes. Finally, the geographical detector (Geodetector) model is applied to evaluate how anthropogenic and natural factors affect spatial distribution patterns and NPP changes. The results indicated that the average annual NPP is 820.39 gC·m−2·yr−1 during the 21 years. In addition, when the NPP varies, it increases over the entire study area, with a slope of 4.81 gC·m−2·yr−1, particularly in the western region. Across the entire research area, 63.39% and 77.44% of the total pixels positively contribute to climate variability and human activities in NPP, with a contribution of 0.90 and 3.91 gC·m−2·yr−1, respectively. Within the western, central, and eastern regions, anthropogenic activities have a stronger impact on NPP than climate variability, particularly pronounced in the eastern region. Furthermore, vegetation cover is the dominant factor in the spatial patterns and NPP trends across the TCT and the three regions. In contrast, climate factors are shown to be less influential in NPP distribution than in the western region. The results also demonstrated that the effect of population density and the GDP on NPP gradually rises. Two-factor interaction is much larger than any individual factor, with the dominant interaction factor being vegetation cover with climatic factors. Lastly, the findings revealed that anthropogenic activities positively promote NPP accumulation across the TCT, thus highlighting the importance of human activity-led ecological restoration and ecological protection measures that contribute to regional carbon sequestration and carbon balance. [ABSTRACT FROM AUTHOR]

The Tarim River Basin (TRB) is situated in the hinterland of northwest China, which is an extremely arid and fragile ecological zone. In recent years, the region's ecological civilization construction has been facing huge challenges that are exacerbated by climate change and human activities. In order to verify the current ecological status of TRB, this paper explores the spatial and temporal variation in ecosystem service value (ESV) and the impact mechanism based on LUCC data from 2000 to 2020, using the adjusted unit area value equivalent method, the elasticity index method and the geo-probe analysis method. The results show that: (1) the ESV of the TRB has fluctuated since 2000, increasing by CNY 14.02 billion, especially in the Hotan River region. Among the individual ecosystem services, the increase in regulatory services is the largest, rising to CNY 8.842 billion. The growth of ESV mostly occurred in the mountains and oases. (2) The rise in ESV is mainly due to the conversion of barren land to water and grassland; ESV loss is mainly affected by the conversion of water to cropland and barren land and grassland to cropland and barren land. (3) Human activity impact or intensity (HAI) is the key driving factor for the spatial stratified heterogeneity of ESV, followed by elevation (DEM). In the interaction analysis, HAI∩DEM interaction is the primary reason for ESV's spatial differentiation. The study's findings show that the combined effects of human activities, DEM, and hydrothermal conditions underlie the spatial stratified heterogeneity of ESV in the TRB. This conclusion provides a scientific basis for future ecological civilization construction planning. [ABSTRACT FROM AUTHOR]

High-quality training samples are essential for accurate land cover classification. Due to the difficulties in collecting a large number of training samples, it is of great significance to collect a high-quality sample dataset with a limited sample size but effective sample distribution. In this paper, we proposed an object-oriented sampling approach by segmenting image blocks expanded from systematically distributed seeds (object-oriented sampling approach) and carried out a rigorous comparison of seven sampling strategies, including random sampling, systematic sampling, stratified sampling (stratified sampling with the strata of land cover classes based on classification product, Latin hypercube sampling, and spatial Latin hypercube sampling), object-oriented sampling, and manual sampling, to explore the impact of training sample distribution on the accuracy of land cover classification when the samples are limited. Five study areas from different climate zones were selected along the China–Mongolia border. Our research identified the proposed object-oriented sampling approach as the first-choice sampling strategy in collecting training samples. This approach improved the diversity and completeness of the training sample set. Stratified sampling with strata defined by the combination of different attributes and stratified sampling with the strata of land cover classes had their limitations, and they performed well in specific situations when we have enough prior knowledge or high-accuracy product. Manual sampling was greatly influenced by the experience of interpreters. All these sampling strategies mentioned above outperformed random sampling and systematic sampling in this study. The results indicate that the sampling strategies of training datasets do have great impacts on the land cover classification accuracies when the sample size is limited. This paper will provide guidance for efficient training sample collection to increase classification accuracies. [ABSTRACT FROM AUTHOR]

Under the strong influence of climate change and human activities, the frequency and intensity of disturbance events in the forest ecosystem both show significant increasing trends. Pine wood nematode (Bursapherenchus xylophilus, PWN) is one of the major alien invasive species in China, which has rapidly infected the forest and spread. In recent years, its tendency has been to spread from south to north, causing serious losses to Pinus and non-Pinus coniferous forests. It is urgent to carry out remote sensing monitoring and prediction of pine wilt disease (PWD). Taking Anhui Province as the study area, we applied ground survey, satellite-borne optical remote sensing imagery and environmental factor statistics, relying on the Google Earth Engine (GEE) platform to build a new vegetation index NDFI based on time-series Landsat images to extract coniferous forest information and used a random forest classification algorithm to build a monitoring model of the PWD infection stage. The results show that the proposed NDFI differentiation threshold classification method can accurately extract the coniferous forest range, with the overall accuracy of 87.75%. The overall accuracy of the PWD monitoring model based on random forest classification reaches 81.67%, and the kappa coefficient is 0.622. High temperature and low humidity are conducive to the survival of PWN, which aggravates the occurrence of PWD. Under the background of global warming, the degree of PWD in Anhui Province has gradually increased, and has transferred from the southwest and south to the middle and northeast. Our results show that PWD monitoring and prediction at a regional scale can be realized by using long time-series multi-source remote sensing data, NDFI index can accurately extract coniferous forest information and grasp disease information in a timely manner, which is crucial for effective monitoring and control of PWD. [ABSTRACT FROM AUTHOR]

Central business districts (CBDs) play a crucial role in urban economic activities. Thus, the location and boundaries of CBDs identified by the unified standards are essential for comparative analyses in urban geography. However, past research mainly applied specific data or sensitive methods to delimitate CBDs within local knowledge in the case study, there remains no automated standardization technique for identifying and delimitating CBDs across the globe. This paper proposed a new method for identifying CBDs based on nighttime lights (NTL) to overcome the above limitations. The main advantages of this method include (1) the use of available high-quality global Black Marble products, which are the basis of a standardized delineation of CBDs and (2) the use of more characteristics of CBD (i.e., the brightness) and NTL negative angular effects that can reflect high-rise building. The proposed method was employed in 14 cities in China and the U.S., and the results showed that China cities needed five NTL indexes and U.S. cities needed two NTL indexes to distinguish CBD and non-CBD successfully. Therefore, our approach is recommended for CBD detection and delineation over large areas. [ABSTRACT FROM AUTHOR]

Permafrost is a significant part of the cryosphere, which has gained increasing attention from scientists, policy-makers, and the general public due to global warming, environmental degradation, water shortages, and intense human activities. Although many permafrost research review articles have been published, these studies were predominantly limited to either one subject or one field, while systematic studies about permafrost based on bibliometric analysis methods remain limited. We aim to fill this gap by conducting a bibliometric analysis of 13,697 articles in the field of permafrost research from 1942 to 2021, collected from the Web of Science core collection database. The results indicate that permafrost research is a typically multi-author, multi-country, and multi-institution cooperative field, involved in many research fields. The cumulative number of publications has presented an exponential increase over the past 80 years, with an average annual growth rate of 10.40%. Since 2000, China has seen a rapid growth in the number of publications per year, surpassing the USA in 2016 and leading in the years since then. In addition, the authors from China have great contributions in publications, and there is good room for permafrost development in the future according to the authors' M-index ranking. After the analysis of authors' keywords, we found that, compared to the conventional methods, machine learning and interferometric synthetic aperture radar (InSAR) are new technological approaches introduced in recent years, and the Qinghai–Tibet Plateau has become a popular study area. The results presented here can help related researchers, scholars, and students in the field to better understand the past developments, current status, and future trends of permafrost research. Furthermore, this paper presents and expands the general process of the bibliometric method used in permafrost studies, which can provide researchers with new inspirations and improve discipline research approach. [ABSTRACT FROM AUTHOR]

Water conservancy personnel usually need to know the water level by water gauge images in real-time and with an expected accuracy. However, accurately recognizing the water level from water gauge images is still a complex problem. This article proposes a composite method applied in the Wuyuan City, Jiangxi Province, in China. This method can detect water gauge areas and number areas from complex and changeable scenes, accurately detect the water level line from various water gauges, and finally, obtain the accurate water level value. Firstly, FCOS is improved by fusing a contextual adjustment module to meet the requirements of edge computing and ensure considerable detection accuracy. Secondly, to deal with scenes with indistinct water level features, we also apply the contextual adjustment module for Deeplabv3+ to segment the water gauge area above the water surface. Then, the area can be used to obtain the position of the water level line. Finally, the results of the previous two steps are combined to calculate the water level value. Detailed experiments prove that this method solves the problem of water level recognition in complex hydrological scenes. Furthermore, the recognition error of the water level by this method is less than 1 cm, proving it is capable of being applied in real river scenes. [ABSTRACT FROM AUTHOR]

The offshore China (OC) region is a significant sea area in the Western Pacific and many researchers have been interested in the distribution of sea surface temperature (SST) fronts in this area. In this study, the Cayula and Cornillon single image edge detection algorithm was used to detect SST fronts using the Daily Optimum Interpolation Sea Surface Temperature data from 1982 to 2021. The results revealed that there are eighteen SST fronts in OC— three in the Bohai Sea, seven in the Yellow Sea, two in the East China Sea, five in the South China Sea, one in the Pacific Ocean east of Taiwan province, China—and among them a new front was detected in the Yellow Sea and named the Yellow Sea Ring Front. The frequency of most fronts showed a tendency of initially increasing and then decreasing from January to September, followed by a trend of growing steadily from October to December. The frequency of a few fronts showed a decreasing tendency from January to September and an increasing tendency from October to December. The frequency of most fronts is highest in winter and lowest in summer. In spring and autumn, the frequency of most fronts is lower than that in winter and higher than that in summer. The annual average frontal probability of five-ninths of the fronts showed an upward trend, and the annual average frontal probability value of one-third of the fronts showed a downward trend. The rest of the fronts showed a stable trend. The results of this paper also showed that the Liaodong Bay Front and the Bohai-Laizhou Bay Front did not form a complete front, as previously reported. In addition, the frontal probability of the Bohai Front to the north of 39° N was in the tendency of decreasing. [ABSTRACT FROM AUTHOR]

Machine learning methods have improved in recent years and provide increasingly powerful tools for understanding landscape evolution. In this study, we used the random forest method based on Google Earth Engine to evaluate the desertification dynamics in northern China from 1995 to 2020. We selected Landsat series image bands, remote sensing inversion data, climate baseline data, land use data, and soil type data as variables for majority voting in the random forest method. The method's average classification accuracy was 91.6% ± 5.8 [mean ± SD], and the average kappa coefficient was 0.68 ± 0.09, suggesting good classification results. The random forest classifier results were consistent with the results of visual interpretation for the spatial distribution of different levels of desertification. From 1995 to 2000, the area of aeolian desertification increased at an average rate of 9977 km2 yr−1, and from 2000 to 2005, from 2005 to 2010, from 2010 to 2015, and from 2015 to 2020, the aeolian desertification decreased at an average rate of 2535, 3462, 1487, and 4537 km2 yr−1, respectively. [ABSTRACT FROM AUTHOR]

Rapid urbanization is universally acknowledged to degrade ecosystem services, posing significant threats to human well-being. However, the effects of urban shrinkage, a global phenomenon and a counterpart to urbanization, on ecosystem services (ESs) remain unclear. This study focuses on China's Rust Belt during the period from 2000 to 2020, constructing a comprehensive analytical framework based on long-term remote sensing data to reveal the temporal and spatial patterns of ESs and their associations with cities experiencing varying degrees of shrinkage. It employs a random forest (RF) model and a Shapley additive explanation (SHAP) model to measure and visualize the significance and thresholds of socioeconomic factors influencing changes in ESs. Our findings highlight the following: (1) Since 2010, the three provinces of Northeast China (TPNC) have begun to shrink comprehensively, with the degree of shrinkage intensifying over time. Resource-based cities have all experienced contraction. (2) Regional urban shrinkage has been found to enhance the overall provision capacity of ESs, with the most significant improvements in cities undergoing continuous shrinkage. (3) The impact of the same socioeconomic drivers varies across cities with different levels of shrinkage; increasing green-space ratios and investing more in public welfare have been identified as effective measures to enhance ESs. (4) Threshold analysis indicates that the stability of the tertiary sector's proportion is critically important for enhancing ESs in cities undergoing intermittent shrinkage. An increase of 10% to 15% in this sector can allow continuously shrinking cities to balance urban development with ecological improvements. This research highlights the positive aspects of urban shrinkage, demonstrating its ability to enhance the provision capacity of ESs. It offers new insights into the protection and management of regional ecosystems and the urban transformation of the three eastern provinces. [ABSTRACT FROM AUTHOR]

Influenced by the combined effects of crustal uplift and river downcutting, rivers with significant potential energy are often found in high mountain and canyon areas. Due to the active tectonic movements that these areas have experienced or are currently experiencing, geological hazards frequently occur on the mountains flanking the rivers. Therefore, evaluating the susceptibility and risk of earthquake landslides in river segments of these high mountain and canyon areas is of great importance for disaster prevention and mitigation, as well as for the safe construction and operation of hydropower stations. Currently, a major challenge in the study of landslide susceptibility and hazard is determining the thickness of potential landslide bodies. The presence of excess topography reflects the instability of the disrupted slopes, which is also a fundamental cause of landslides. This study takes the example of the Ludian earthquake in 2014, focusing on the IX and VIII intensity zones, to extract the excess topography in the study area and analyze its correlation with seismic landslides. The correlation between the critical acceleration value and the excess topography was validated using the Spearman's rank correlation coefficient, resulting in a correlation coefficient of −0.771. This indicates a strong negative correlation between the excess topography and critical acceleration, with significant relevance. The landslide susceptibility distribution obtained by setting the potential landslide thickness based on the excess topography and proportion coefficient showed an ROC curve analysis AUC value of 0.829. This is higher than the AUC value of 0.755 for the landslide susceptibility result using a uniform potential landslide thickness of 3 m, indicating the higher model evaluation accuracy of this approach. Earthquake landslide hazard predictions for rapid post-earthquake assessments and earthquake landslide hazard zoning for pre-earthquake planning were made using actual seismic ground motion and a 2% exceedance probability in 50 years, respectively. Comparing these with the 10,559 coseismic landslides triggered by the Ludian earthquake and evaluating the seismic landslide development rate, the results were found to be consistent with reality. The improved model better reflects the control of excess topography and rock mechanics properties on the development of earthquake landslide hazards on high steep slopes. Identifying high-risk seismic landslide areas through this method and taking corresponding preventive and protective measures can help plan and construct safer hydropower and other infrastructure, thereby enhancing their disaster resistance. [ABSTRACT FROM AUTHOR]

Forest and grass ecological space is the key component of the ecosystem and plays a vital role in regulating the carbon, water, and energy cycle. The long-term exploitation of forest and grass ecological space and huge population pressure have gradually degraded the function of China's ecosystem. Therefore, forest and grass ecological space plays an important role in maintaining the stability of the ecosystem. The relationship between forest and grass ecospatial network structure and ecosystem service has been the focus of research. In this study, the forest and grass ecospatial network is constructed based on the minimum cumulative resistance (MCR) model. Then, the topological indicators (degree, weight clustering coefficient, node weight, unit weight, weight distribution difference, betweenness, PageRank) of the forest and grass ecospatial network were calculated by combining the complex network theory to analyze the relationship between these topological indicators and the three ecosystems (water retention, soil conservation, carbon storage). Based on the ecological significance of topological indicators, we identified ecologically fragile areas and proposed areas and directions for optimizing the ecospatial structure. Results show that the spatial distribution of the three ecosystem services in the southeast region of China is higher than that in the northwest region of China and shows a gradual decrease from the east to the west. The degree, node weight, unit weight, PageRank, and betweenness were highly significant and positively correlated with the three ecosystem services, among which PageRank had the highest correlation with water retention (p < 0.01, R2 = 0.835). Based on the spatial distribution characteristics of the different topological indicators, the quantitative relationship between the structural characteristics of the forest and grass ecospatial network and ecosystem services is clarified, revealing the intrinsic connection between ecological processes and ecosystem services. Through rational optimization of the forest and grass ecospatial network, ecosystem services can be effectively improved and ecosystem stability can be enhanced. [ABSTRACT FROM AUTHOR]

As one of the most prevailing geodetic tools, the interferometric synthetic aperture radar (InSAR) technique can accurately obtain co-seismic displacements, but is limited to the one-dimensional line-of-sight (LOS) measurement. It is therefore difficult to completely reveal the real three-dimensional (3D) surface displacements with InSAR. By employing azimuth displacement observations from pixel offset tracking (POT) and multiple aperture InSAR (MAI) techniques, 3D displacements of large-magnitude earthquakes can be obtained by integrating the ascending and descending data. However, this method cannot be used to accurately realize the 3D surface displacement measurements of small-magnitude earthquakes due to the low accuracies of the POT/MAI-derived azimuth displacement measurements. In this paper, an alternative method is proposed to calculate co-seismic 3D displacements from ascending and descending InSAR-LOS observations with the dislocation model-based displacement direction constraint. The main contribution lies in the two virtual observation equations that are obtained from the dislocation model-based forward-modeling 3D displacements, which are then combined with the ascending/descending InSAR observations to calculate the 3D displacements. The basis of the two virtual observation equations is that the directions of the 3D displacement vectors are very similar for real and model-based 3D displacements. In addition, the weighted least squares (WLS) method is employed to solve the final 3D displacements, which aims to consider and balance the possible errors in the InSAR observations as well as the dislocation model-based displacement direction constraint. A simulation experiment demonstrates that the proposed method can achieve more accurate 3D displacements compared with the existing methods. The co-seismic 3D displacements of the 2020 Nima earthquake are then accurately obtained by the proposed method. The results show that co-seismic displacements are dominated by the vertical displacement, the magnitude of the horizontal displacement is relatively small, and the overall displacement pattern fits well with the tensile rupture. [ABSTRACT FROM AUTHOR]

A forest fire susceptibility map generated with the fire susceptibility model is the basis of fire prevention resource allocation. A more reliable susceptibility map helps improve the effectiveness of resource allocation. Thus, further improving the prediction accuracy is always the goal of fire susceptibility modeling. This paper developed a forest fire susceptibility model based on an ensemble learning method, namely light gradient boosting machine (LightGBM), to produce an accurate fire susceptibility map. In the modeling, a subtropical national forest park in the Jiangsu province of China was used as the case study area. We collected and selected eight variables from the fire occurrence driving factors for modeling based on correlation analysis. These variables are from topographic factors, climatic factors, human activity factors, and vegetation factors. For comparative analysis, another two popular modeling methods, namely logistic regression (LR) and random forest (RF) were also applied to construct the fire susceptibility models. The results show that temperature was the main driving factor of fire in the area. In the produced fire susceptibility map, the extremely high and high susceptibility areas that were classified by LR, RF, and LightGBM were 5.82%, 18.61%, and 19%, respectively. The F1-score of the LightGBM model is higher than the LR and RF models. The accuracy of the model of LightGBM, RF, and LR is 88.8%, 84.8%, and 82.6%, respectively. The area under the curve (AUC) of them is 0.935, 0.918, and 0.868, respectively. The introduced ensemble learning method shows better ability on performance evaluation metrics. [ABSTRACT FROM AUTHOR]

Soil temperature is an important physical variable that characterises geothermal conditions and influences geophysical, biological and chemical processes in the earth sciences. Soil temperature is not only affected by climatic and geographical factors; it is also modulated by local factors such as snow cover and vegetation. This paper investigates the relationship between snow cover and vegetation and soil temperature with the help of two classical remote sensing indicators, the Snow Cover Days (SCD) based Advanced Very High Resolution Radiometer and the Normalized Difference Vegetation Index (NDVI)-based Global Inventory Modelling and Mapping Studies, to analyse the influence of local factors on soil temperature in the Three River Source Region (TRSR). Combing multi-layer geothermal observations from 23 stations in the TRSR with meteorological dataset, soil properties datasets, snow cover and vegetation indices, a non-linear model, the Random Forest model, is used to establish a multi-layer soil temperature dataset to analyse the influence of surface cover factors in each depth. The results showed that the annual SCD had a decreasing trend during 1982–2015 and was negatively correlated with the annual mean soil temperature; the annual NDVI had no significant trend, but it was positively correlated with the annual mean soil temperature. Regionally, there was a significant decrease in SCD in the mountainous areas bordering the source areas of the three rivers, and there was a trend of increasing NDVI in the northwest and decreasing vegetation in the southwest in the TRSR. The stronger the correlation with soil temperature in areas with a larger SCD, the more the snow has a cooling effect on the shallower soil temperatures due to the high albedo of the accumulated snow and the repeated melting and heat absorption of the snow in the area. The snow has an insulating effect on the 40 cm soil layer by impeding the cooling effect of the atmosphere in winter. In sparsely vegetated areas, vegetation lowers ground albedo and warms the soil, but in July and August, in areas with more vegetation, NDVI is negatively correlated with soil temperature, with heavy vegetation intercepting summer radiant energy and having a cooling effect on the soil. [ABSTRACT FROM AUTHOR]

It is difficult to detect bridges in synthetic aperture radar (SAR) images due to the inherent speckle noise of SAR images, the interference generated by strong coastal scatterers, and the diversity of bridge and coastal terrain morphologies. In this paper, we present a two-step bridge detection method for polarimetric SAR imagery, in which the probability graph model of a Markov tree is used to build the water network, and bridges are detected by traversing the graph of the water network to determine all adjacent water branch pairs. In the step of the water network construction, candidate water branches are first extracted by using a region-based level set segmentation method. The water network is then built globally as a tree by connecting the extracted water branches based on the probabilistic graph model of a Markov tree, in which a node denotes a single branch and an edge denotes the connection of two adjacent branches. In the step of the bridge detection, all adjacent water branch pairs related to bridges are searched by traversing the constructed tree. Each bridge is finally detected by merging the two contours of the corresponding branch pair. Three polarimetric SAR data acquired by RADARSAT-2 covering Singapore and Lingshui, China, and by TerraSAR-X covering Singapore, are used for testing. The experimental results show that the detection rate, the false alarm rate, and the intersection over union (IoU) between the recognized bridge body and the ground truth are all improved by using the proposed method, compared to the method that constructs a water network based on water branches merging by contour distance. [ABSTRACT FROM AUTHOR]

The study of cloud types is critical for understanding atmospheric motions and climate predictions; for example, accurately classified cloud products help improve meteorological predicting accuracies. However, the current satellite cloud classification methods generally analyze the threshold change in a single pixel and do not consider the relationship between the surrounding pixels. The classification development relies heavily on human recourses and does not fully utilize the data-driven advantages of computer models. Here, a new intelligent cloud classification method based on the U-Net network (CLP-CNN) is developed to obtain more accurate, higher frequency, and larger coverage cloud classification products. The experimental results show that the CLP-CNN network can complete a cloud classification task of 800 × 800 pixels in 0.9 s. The classification area covers most of China, and the classification task only needs to use the original L1-level data, which can meet the requirements of a real-time operation. With the Himawari-8 CLTYPE product and the CloudSat 2B-CLDCLASS product as the test comparison target, the CLP-CNN network results match the Himawari-8 product highly, by 84.4%. The probability of detection (POD) is greater than 0.83 for clear skies, deep-convection, and Cirrus–Stratus type clouds. The probability of detection (POD) and accuracy are improved compared with other deep learning methods. [ABSTRACT FROM AUTHOR]

Accurate and reliable farmland crop mapping is an important foundation for relevant departments to carry out agricultural management, crop planting structure adjustment and ecological assessment. The current crop identification work mainly focuses on conventional crops, and there are few studies on parcel-level mapping of horticultural crops in complex mountainous areas. Using Miaohou Town, China, as the research area, we developed a parcel-level method for the precise mapping of horticultural crops in complex mountainous areas using very-high-resolution (VHR) optical images and Sentinel-2 optical time-series images. First, based on the VHR images with a spatial resolution of 0.55 m, the complex mountainous areas were divided into subregions with their own independent characteristics according to a zoning and hierarchical strategy. The parcels in the different study areas were then divided into plain, greenhouse, slope and terrace parcels according to their corresponding parcel characteristics. The edge-based model RCF and texture-based model DABNet were subsequently used to extract the parcels according to the characteristics of different regions. Then, Sentinel-2 images were used to construct the time-series characteristics of different crops, and an LSTM algorithm was used to classify crop types. We then designed a parcel filling strategy to determine the categories of parcels based on the classification results of the time-series data, and accurate parcel-level mapping of a horticultural crop orchard in a complex mountainous area was finally achieved. Based on visual inspection, this method appears to effectively extract farmland parcels from VHR images of complex mountainous areas. The classification accuracy reached 93.01%, and the Kappa coefficient was 0.9015. This method thus serves as a methodological reference for parcel-level horticultural crop mapping and can be applied to the development of local precision agriculture. [ABSTRACT FROM AUTHOR]

Due to the country's rapid economic growth, the problem of air pollution in China is becoming increasingly serious. In order to achieve a win-win situation for the environment and urban development, the government has issued many policies to strengthen environmental protection. PM2.5 is the primary particulate matter in air pollution, so an accurate estimation of PM2.5 distribution is of great significance. Although previous studies have attempted to retrieve PM2.5 using geostatistical or aerosol remote sensing retrieval methods, the current rough resolution and accuracy remain as limitations of such methods. This paper proposes a fine-grained spatiotemporal PM2.5 retrieval method that comprehensively considers various datasets, such as Landsat 8 satellite images, ground monitoring station data, and socio-economic data, to explore the applicability of different machine learning algorithms in PM2.5 retrieval. Six typical algorithms were used to train the multi-dimensional elements in a series of experiments. The characteristics of retrieval accuracy in different scenarios were clarified mainly according to the validation index, R2. The random forest algorithm was shown to have the best numerical and PM2.5-based air-quality-category accuracy, with a cross-validated R2 of 0.86 and a category retrieval accuracy of 0.83, while both maintained excellent retrieval accuracy and achieved a high spatiotemporal resolution. Based on this retrieval model, we evaluated the PM2.5 distribution characteristics and hourly variation in the sample area, as well as the functions of different input variables in the model. The PM2.5 retrieval method proposed in this paper provides a new model for fine-grained PM2.5 concentration estimation to determine the distribution laws of air pollutants and thereby specify more effective measures to realize the high-quality development of the city. [ABSTRACT FROM AUTHOR]

On 23 November 2021, the Gaofen-3-02 (GF3-02) satellite was successfully launched in the Jiuquan Satellite Launch Center of China. The primary payload is C-band Synthetic Aperture Radar (SAR), with a maximum resolution of 1 m, and includes 12 imaging modes such as Spotlight, Strip, and TOPSAR, which will play an essential role in marine environment monitoring. As an important marine environmental parameter, the wind speed accuracy retrieved by GF3-02 SAR directly reflects its performance and effectiveness as an operational product. Therefore, based on the wind data of buoys of the National Data Buoy Center (NDBC), ECMWF reanalysis V5 (ERA5), and HY-2B Scatterometer (SCA), a preliminary accuracy assessment of the wind speed retrieved by GF3-02 SAR is carried out in this paper. The wind speed retrieval accuracy of GF3-02 SAR in the co-polarization (HH+VV) data under different Geophysical Model Functions (GMFs) is discussed by using 478 level-1A Single Look Complex (SLC) ocean products acquired in Quad-Polarization Strip I (QPSI) and produced by the National Satellite Ocean Application Service (NSOAS) from January to March 2022. The results show that the optimal root mean square errors (RMSE) are 1.40 m/s, 1.18 m/s, and 1.24 m/s for the VV polarization and 1.39 m/s, 1.19 m/s, and 1.52 m/s for the HH polarization compared to the NDBC wind speed, the ERA5 wind speed, and the HY-2B SCA wind speed, respectively. The preliminary results show that GF3-02 SAR has good wind speed retrieval ability and can meet the needs of operational products. [ABSTRACT FROM AUTHOR]

Gross floor area is defined as the product of number of building stories and its base area. Gross floor area acquisition is the core problem to estimate floor area ratio, which is an important indicator for many geographical analyses. High data acquisition cost or inherent defect of methods for existing gross floor area acquisition methods limit their applications in a wide range. In this paper we proposed three instance-wise gross floor area estimation methods in various degrees of end-to-end learning from monocular optical images based on the NoS R-CNN, which is a deep convolutional neural network to estimate the number of building stories. To the best of our knowledge, this is the first attempt to estimate instance-wise gross floor area from monocular optical satellite images. For comparing the performance of the proposed three methods, experiments on our dataset from nine cities in China were carried out, and the results were analyzed in detail in order to explore the reasons for the performance gap between the different methods. The results show that there is an inverse relationship between the model performance and the degree of end-to-end learning for base area estimation task and gross floor area estimation task. The quantitative and qualitative evaluations of the proposed methods indicate that the performances of proposed methods for accurate GFA estimation are promising for potential applications using large-scale remote sensing images. The proposed methods provide a new perspective for gross floor area/floor area ratio estimation and downstream tasks such as population estimation, living conditions assessment, etc. [ABSTRACT FROM AUTHOR]