Search

Global navigation satellite system reflectometry (GNSS-R) is a remote sensing technology of soil moisture measurement using signals of opportunity from GNSS, which has the advantages of low cost, all-weather detection, and multi-platform application. An in situ GNSS-R and radiometer fusion soil moisture retrieval model based on LSTM (long–short term memory) is proposed to improve accuracy and robustness as to the impacts of vegetation cover and soil surface roughness. The Oceanpal GNSS-R data obtained from the experimental campaign at the Valencia Anchor Station are used as the main input data, and the TB (brightness temperature) and TR (soil roughness and vegetation integrated attenuation coefficient) outputs of the ELBARA-II radiometer are used as auxiliary input data, while field measurements with a Delta-T ML2x ThetaProbe soil moisture sensor were used for reference and validation. The results show that the LSTM model can be used to retrieve soil moisture, and that it performs better in the data fusion scenario with GNSS-R and radiometer. The STD of the multi-satellite fusion model is 0.013. Among the single-satellite models, PRN13, 20, and 32 gave the best retrieval results with STD = 0.011, 0.012, and 0.007, respectively. [ABSTRACT FROM AUTHOR]

The retrieval of crop growth status using Global Navigation Satellite System Interferometric Reflectometry (GNSS-IR) has become a major area of interest within the field of vegetation remote sensing in recent years. Using only a single GNSS antenna, it is difficult to determine the crop growth status and soil water content (SWC) in vegetation-covered regions due to plenty of multi-path signals. Based on the empirical mode decomposition and the spectrum difference, this study presents an algorithm that can decompose and separate signals reflected by the soil surface or corn canopy. Because the low-roughness soil surface is isotropic while the corn canopy is anisotropic, the signals reflected by the soil surface have a higher proportion of coherent components than those reflected by the corn canopy. The moduli between the retrieved heights and the actual heights (for the same interval from different satellites) have the least variance. In this study, the signals reflected by the soil surface and the corn canopy are separated using the variance of retrieved heights. When the corn grows taller than the GNSS antenna, the vegetation water content (VWC) of the corn leaves becomes the primary factor affecting the direct signal's intensity, as the leaves obstruct the signal. Hence, the VWC of corn leaves can be calculated through the power attenuation of signals. An experiment performed on a plot of land covered with corn shows that, after multi-GPS-satellite fusion, the correlations between the retrieved corn canopy height, leaf VWC, soil water content (SWC), and in situ data reach 0.94, 0.92, and 0.88, respectively. The corresponding root mean square errors are 0.195 m, 0.0055 kg/cm 2 , and 0.0484 cm 3 /cm 3 , respectively. [ABSTRACT FROM AUTHOR]

This article aims to attempt to increase the number of satellites that can be used for monitoring soil moisture to obtain more precise results using GNSS-IR (Global Navigation Satellite System-Interferometric Reflectometry) technology to estimate soil moisture. We introduce a soil moisture inversion model by using GPS SNR (Signal-to-Noise Ratio) data and propose a novel Robust Kalman Filter soil moisture inversion model based on that. We validate our models on a data set collected at Lamasquère, France. This paper also compares the precision of the Robust Kalman Filter model with the conventional linear regression method and robust regression model in three different scenarios: (1) single-band univariate regression, by using only one observable feature such as frequency, amplitude, or phase; (2) dual-band data fusion univariate regression; and (3) dual-band data fusion multivariate regression. First, the proposed models achieve higher accuracy than the conventional method for single-band univariate regression, especially by using the phase as the input feature. Second, dual-band univariate data fusion achieves higher accuracy than single-band and the result of the Robust Kalman Filter model correlates better to the in situ measurement. Third, multivariate variable fusion improves the accuracy for both models, but the Robust Kalman Filter model achieves better improvement. Overall, the Robust Kalman Filter model shows better results in all the scenarios. [ABSTRACT FROM AUTHOR]