Search

The soil dielectric constant model is essential for retrieving soil properties based on microwave remote sensing. However, the existing saline soil dielectric constant models perform poorly in simulating the dielectric constant of soil with high water content and salinity. In this study, the Wang Yueru (WYR) saline soil dielectric constant model, which was demonstrated to perform well in describing the effect of salinity and moisture on the dielectric constant, was validated based on experimental measurements of soil samples under different water content and salinity degrees. Furthermore, we adjusted the model form, refitted the empirical coefficient in the model, and finally acquired a two-stage model for simulating the soil dielectric constant. The enhanced model was validated under different soil moisture and salinity ranges using experimental measurements of soil samples. Compared to the original model, the proposed model exhibits a larger improvement in simulating the soil dielectric constant, and the RMSE of the simulated results dramatically decreased from 7.3 to 1.6, especially for soil with high salinity and water content. On this basis, a model suitable for L-band microwave was established. This model is of great significance for studying soil dielectric characteristics and retrieving soil parameters based on L-band data. Furthermore, this model can be used to retrieve soil salinity and water content using microwave remote sensing under a broadened application situation, such as in saline-alkali soils, wetlands, and salt marshes. [ABSTRACT FROM AUTHOR]

Soil moisture (SM), as a crucial input variable of land surface processes, plays a pivotal role in the global hydrological cycle. The aim of this paper is to examine the spatiotemporal variability in SM in the Heihe River Basin using all-weather land surface temperature (LST) and reanalysis land surface data. Initially, we downscaled and generated daily 1 km all-weather SM data (2020) for the Heihe River Basin. Subsequently, we investigated the spatial and temporal patterns of SM using geostatistical and time stability methods. The driving forces of the monthly SM were studied using the optimal parameter-based geographical detector (OPGD) model. The results indicate that the monthly mean values of the downscaled SM data range from 0.115 to 0.146, with a consistently lower SM content and suitable temporal stability throughout the year. Geostatistical analysis revealed that months with a higher SM level exhibit larger random errors and higher variability. Driving analysis based on the factor detector demonstrated that in months with a lower SM level, the q values of each driving factor are relatively small, and the primary driving factors are land cover and elevation. Conversely, in months with a higher SM level, the q values for each driving factor are larger, and the primary driving factors are the normalized difference vegetation index and LST. Furthermore, interaction detector analysis suggested that the spatiotemporal variation in SM is not influenced by a single driving factor but is the result of the interaction among multiple driving factors, with most interactions enhancing the combined effect of two factors. [ABSTRACT FROM AUTHOR]

Land surface temperature (LST) is a crucial biophysical parameter related closely to the land–atmosphere interface. Satellite thermal infrared measurement provides an effective method to derive LST on regional and global scales, but it is very hard to acquire simultaneously high spatiotemporal resolution LST due to its limitation in the sensor design. Recently, many LST downscaling and spatiotemporal image fusion methods have been widely proposed to solve this problem. However, most methods ignored the spatial heterogeneity of LST distribution, and there are inconsistent image textures and LST values over heterogeneous regions. Thus, this study aims to propose one framework to derive high spatiotemporal resolution LSTs in heterogeneous areas by considering the optimal selection of LST predictors, the downscaling of MODIS LST, and the spatiotemporal fusion of Landsat 8 LST. A total of eight periods of MODIS and Landsat 8 data were used to predict the 100-m resolution LST at prediction time tp in Zhangye and Beijing of China. Further, the predicted LST at tp was quantitatively contrasted with the LSTs predicted by the regression-then-fusion strategy, STARFM-based fusion, and random forest-based regression, and was validated with the actual Landsat 8 LST product at tp. Results indicated that the proposed framework performed better in characterizing LST texture than the referenced three methods, and the root mean square error (RMSE) varied from 0.85 K to 2.29 K, and relative RMSE varied from 0.18 K to 0.69 K, where the correlation coefficients were all greater than 0.84. Furthermore, the distribution error analysis indicated the proposed new framework generated the most area proportion at 0~1 K in some heterogeneous regions, especially in artificial impermeable surfaces and bare lands. This means that this framework can provide a set of LST dataset with reasonable accuracy and a high spatiotemporal resolution over heterogeneous areas. [ABSTRACT FROM AUTHOR]

The passive microwave land surface emissivity (MLSE) plays a crucial role in retrieving various land surface and atmospheric parameters and in Numerical Weather Prediction models. The retrieval accuracy of MLSE depends on many factors, including the consistency of the input data acquisition time. The FengYun-3D (FY-3D) polar-orbiting meteorological satellite, equipped with passive microwave and infrared bands, offers time-consistent data crucial for MLSE retrieval. This study proposes a physics-based MLSE retrieval algorithm using all the input data from the FY-3D satellite. Based on the retrieved MLSE, the spatial distribution of the MLSE is closely correlated with the land cover types and topography. Lower emissivities prevailed over barren or sparsely vegetated regions, river basins, and coastal areas. Higher emissivities dominated densely vegetated regions and mountainous areas. Moderate emissivities dominated grasslands and croplands. Lower-frequency channels showed larger emissivity differences with different polarizations than those of higher-frequency channels in barren or sparsely vegetated regions. The MLSE across densely vegetated land areas, mountainous areas, and deserts showed small seasonal variations. However, woody savannas, grasslands, croplands, and seasonal snow-covered areas showed noticeable seasonal variations. For most land cover types, the differences between vertically and horizontally polarized emissivities remained relatively constant across seasons. However, certain grasslands in eastern Inner Mongolia and southern Mongolia showed clear seasonal variations. It is very difficult to verify the MLSE on a large scale. Consequently, the possible error sources in the retrieved MLSE were analyzed, including the brightness temperature errors (correlation coefficient ranging from 0.92 to 0.99) and the retrieved land surface temperature errors (Root Mean Square Error was 3.34 K and relation coefficient was 0.958). [ABSTRACT FROM AUTHOR]

Accurate information on grassland above-ground biomass (AGB) is critical to better understanding the carbon cycle and conserve grassland resources. As a climate-sensitive key ecological function area, it is important to accurately estimate the grassland AGB of the Tibetan Plateau. Sentinel-2 (S2) images have advantages in reducing mixed pixels and the scale effect for remote sensing, while the data volume is correspondingly larger. In order to improve the estimation accuracy while reducing the data volume required for AGB estimation and improving the computational efficiency, this study used the Recursive Feature Elimination (RFE) algorithm to find the optimal feature set and compared the performance of the Cubist, Gradient Boosting Regression Tree (GBRT), random forest (RF) and eXtreme Gradient Boosting (XGBoost) algorithms for estimating AGB. In this study, ten S2 bands, ten S2-derived vegetation indexes, 218 pieces of AGB field survey data, four types of meteorological data and three types of topographic data were used as the alternative input features for the AGB estimation model. The impurity and permutation importance were used as the feature importance calculation method input to the RFE, and the Cubist, GBRT, RF and XGBoost algorithms were used to construct the AGB estimation models. The results showed that the RF algorithm based on the monthly average temperature (T), elevation, Normalized Difference Phenology Index (NDPI), Normalized Difference Infrared Index (NDII) and Palmer Drought Severity Index (PDSI) performed best ( R 2 = 0.8838, RMSE = 35.05 g/m 2 , LCCC = 2.44, RPPD = 0.91). The above findings suggest that the RF model based on the features related to temperature, altitude, humidity and leaf water content is beneficial to estimate the grassland AGB on the Tibetan Plateau. [ABSTRACT FROM AUTHOR]