Search

In 2020, the BeiDou-3 global navigation satellite system (BDS-3) was officially completed and put into service. Currently, network real-time kinematic (RTK) technology is considered the main means through which to improve the positioning accuracy of the BeiDou navigation satellite system (BDS). This paper proposes a long-range undifferenced network RTK (URTK) algorithm, based on multi-frequency observation data of the BDS. First, the multi-frequency phase integer ambiguity resolution (AR) model considering atmospheric error parameters is designed, and the multi-frequency phase integer ambiguity of the long-range BDS reference station is determined. Then, the undifferenced integer ambiguity of each reference station is obtained, using linear variation based on the accurately determined phase integer ambiguity between reference stations, and the undifferenced observation error of each reference station is calculated. Considering the weakening spatial correlation of the observation errors between long-range stations, undifferenced classification error corrections of a reference station network are separated, according to different error characteristics. Finally, the inverse distance weighting method is employed to calculate the classification undifferenced error correction of the rover station. The rover station corrects the observation error through applying the undifferenced error correction to achieve high-precision positioning. The measured data of a long-range continuous operation reference station (CORS) network are selected for an experiment. The results show that the proposed algorithm can quickly and accurately realize the resolution of the BDS integer ambiguity of a reference station network and establish an undifferenced area error correction model in order to achieve accurate classification of undifferenced error correction values for a rover station. In China, the BDS-3 is superior to the global positioning system (GPS) in terms of the satellite number, position dilution of precision (PDOP) value, AR success rate, stability, and convergence time. The results show that the AR success rate, stability, and convergence time increase with the operational frequency, and the BDS-3 can achieve centimeter-level positioning of single-system rover stations without relying on the GPS. [ABSTRACT FROM AUTHOR]

As the Global Navigation Satellite System (GNSS) is widely used in all walks of life, the signal structure of satellite navigation is open, and the vulnerability to spoofing attacks is also becoming increasingly prominent, which will seriously affect the credibility of navigation, positioning, and timing (PNT) services. Satellite navigation signal authentication technology is an emerging technical means of improving civil signal anti-spoofing on the satellite navigation system side, and it is also an important development direction and research focus of the GNSS. China plans to carry out the design and development of the next-generation Beidou navigation satellite system (BDS), and one of its core goals is to provide more secure and credible PNT services. This paper first expounds on the principles and technical architecture of satellite navigation signal authentication, then clarifies the development history of satellite navigation signal authentication, and finally proposes the BDS authentication service system architecture. It will provide technical support for the construction and development of the follow-up Beidou authentication service. [ABSTRACT FROM AUTHOR]

Precise Point Positioning (PPP) is an official service of the BeiDou Global Navigation Satellite System (BDS-3) through the PPP-B2b signal. In this paper, we mainly focus on the long-term performance evaluation of BDS-3 PPP-B2b products and their application in time service. Since the PPP-B2b product is only available in and around China area, the arcs of PPP-B2b products are about several hours. We propose to evaluate the time datum stability by using all available satellites. Then, 557 day PPP-B2b products are collected for this experiment. The results show that there are large jumps in the GPS satellite clock time datum series. However, the BDS-3 satellite clock datum stability is almost at the same level with current Space State Representation (SSR) corrections from the International Global navigation satellite system Service (IGS). The difference between PPP-B2b GPS and BDS-3 satellite clock time datum will be absorbed into the Inter System Bias (ISB) parameter. Thus, it should be specially noted that the ISB parameter cannot be estimated as constant values if users use PPP-B2b products. In addition, the accuracy of the BDS-3 satellite clock is significantly better than that of the GPS for both the Root Mean Square Error (RMSE) and standard deviation (STD). The average Signal in Space Range Errors (SISREs) is 0.22 ns and 0.13 ns for GPS and BDS-3, respectively. The one-way timing experiment shows BDS-3 timing stability is 2.9 × 10−14@104 s. In addition, 10 baselines from 13 km to 4494 km are formed for time synchronization evaluation by using PPP-B2b products. The average RMSEs of time synchronization is from 0.46 ns to 1.58 ns and from 0.66 ns to 1.19 ns for GPS and BDS-3, respectively. As for STD, the average values are from 0.27 ns to 0.74 ns and from 0.27 ns to 0.47 ns for GPS and BDS-3, respectively. Overall, the results show that the time datum stability, accuracy, and service performance of BDS-3 PPP-B2b products has been stable over the past two years. [ABSTRACT FROM AUTHOR]

Positioning of spacecraft (e.g., geostationary orbit (GEO), high elliptical orbit (HEO), and lunar trajectory) is crucial for mission completion. Instead of using ground control systems, global navigation satellite system (GNSS) can be an effective approach to provide positioning, navigation and timing service for spacecraft. In 2020, China finished the construction of the third generation of BeiDou navigation satellite system (BDS-3); this global coverage system will contribute better sidelobe signal visibility for spacecraft. Meanwhile, with more than 100 GNSS satellites, multi-GNSS navigation performance on the spacecraft is worth studying. In this paper, instead of using signal-in-space ranging errors, we simulate pseudorange observations with measurement noises varying with received signal powers. Navigation performances of BDS-3 and its combinations with other systems were conducted. Results showed that, owing to GEO and inclined geosynchronous orbit (IGSO) satellites, all three types (GEO, HEO, and lunar trajectory) of spacecraft received more signals from BDS-3 than from other navigation systems. Single point positioning (SPP) accuracy of the GEO and HEO spacecraft was 17.7 and 23.1 m, respectively, with BDS-3 data alone. Including the other three systems, i.e., GPS, Galileo, and GLONASS, improved the SPP accuracy by 36.2% and 19.9% for GEO and HEO, respectively. Navigation performance of the lunar probe was significantly improved when receiver sensitivity increased from 20 dB-Hz to 15 dB-Hz. Only dual- (BDS-3/GPS) or multi-GNSS (BDS-3, GPS, Galileo, GLONASS) could provide continuous navigation solutions with a receiver threshold of 15 dB-Hz. [ABSTRACT FROM AUTHOR]

The advancements of Earth observations, remote sensing, communications and navigation augmentation based on low Earth orbit (LEO) platforms present strong requirements for accurate, real-time and autonomous navigation of LEO satellites. Precise onboard real-time orbit determination (RTOD) using the space-borne data of multiple global navigation satellite systems (multi-GNSS) becomes practicable along with the availability of multi-GNSS. We study the onboard RTOD algorithm and experiments by using America's Global Positioning System (GPS) and China's regional BeiDou Navigation Satellite System (BDS-2) space-borne data of the FengYun-3C satellite. A new pseudo-ambiguity parameter, which combines the constant phase ambiguity, the orbit and clock offset error of the GPS/BDS broadcast ephemeris in the line-of-sight (LOS), is defined and estimated in order to reduce the negative effect of the LOS error on onboard RTOD. The analyses on the variation of the LOS error in the GPS/BDS broadcast ephemeris indicate that the pseudo-ambiguity parameter could be modeled as a random walk, and the setting of the power spectral density in the random walk model decides whether the pseudo-ambiguity can be estimated reasonably and the LOS error could be reduced or not. For different types of GPS/BDS satellites, the LOS errors show different variation characteristics, so the power spectral density should be set separately and differently. A numerical search approach is presented in this paper to find the optimal setting of the power spectral density for each type of GPS/BDS satellite by a series of tests. Based on the optimal stochastic model, a 3-dimensional (3D) real-time orbit accuracy of 0.7–2.0 m for position and 0.7–1.7 mm/s for velocity could be achieved only with dual-frequency BDS measurements and the broadcast ephemeris, while a notably superior orbit accuracy of 0.3–0.5 m for position and 0.3–0.5 mm/s for velocity is achievable using dual-frequency GPS/BDS measurements, due to the absorption effect of the estimated pseudo-ambiguity on the LOS error of the GPS/BDS broadcast ephemeris. Compared to using GPS-alone data, the GPS/BDS fusion only marginally improves the onboard RTOD orbit accuracy by about 1–3 cm, but the inclusion of BDS satellites increases the number of the tracked GNSS satellites and thus speeds up the convergence of the filter. Furthermore, the GPS/BDS fusion could help suppress the local orbit errors, ensure the orbit accuracy and improve the reliability and availability of the onboard RTOD when fewer GPS satellites are tracked in some anomalous arcs. [ABSTRACT FROM AUTHOR]

The third generation of China's BeiDou Navigation Satellite System (BDS-3) began to provide global services on 27 December, 2018. Differential code bias (DCB) is one of the errors in precise BDS positioning and ionospheric modeling, but the impacts on BDS-2 satellites and receiver DCB are unknown after joining BDS-3 observations. In this paper, the BDS-3 DCBs are estimated and analyzed using the Multi-Global Navigation Satellite System (GNSS) Experiment (MGEX) observations during the period of day of year (DOY) 002–031, 2019. The results indicate that the estimated BDS-3 DCBs have a good agreement with the products provided by the Chinese Academy of Sciences (CAS) and Deutsche Zentrum für Luft- und Raumfahrt (DLR). The differences between our results and the other two products are within ±0.2 ns, with Standard Deviations (STDs) of mostly less than 0.2 ns. Furthermore, the effects on satellite and receiver DCB after adding BDS-3 observations are analyzed by BDS-2 + BDS-3 and BDS-2-only solutions. For BDS-2 satellite DCB, the values of effect are close to 0, and the effect on stability of DCB is very small. In terms of receiver DCB, the value of effect on each station is related to the receiver type, but their mean value is also close to 0, and the stability of receiver DCB is better when BDS-3 observations are added. Therefore, there is no evident systematic bias between BDS-2 and BDS-2 + BDS-3 DCB. [ABSTRACT FROM AUTHOR]