Search

Strong earthquakes can not only trigger many landslides in a short period of time but can also change the stability of slopes in the earthquake area, causing them to be active for a long time after the earthquake. Research on the variation of slow-motion slopes before and after earthquakes can help us to better understand the mechanism of earthquake-affected landslides, which is also crucial for assessing the long-term landslide risk in seismically active areas. Here, L-band ALOS-2 PALSAR-2 images are utilized with the SBAS-InSAR algorithm to monitor and assess the location and activity changes of slow-moving landslides in the Iburi region (Hokkaido, Japan) before and after an earthquake occurred on 6 September 2018. Unlike previous studies, which focused on single typical landslides, we tracked all the landslides within a 33 × 55 km region close to the epicenter. According to the results, the majority of the co-seismic landslides that quickly failed during the earthquake are now stable, and a few of them are still moving. In contrast, due to near-field seismic shaking, certain slopes that did not show substantial surface changes during the earthquake period continued to move and eventually developed into slow-moving landslides. In addition, it can be seen from the spatial distribution of slow-moving landslides after the earthquake that this distribution is not only dependent on strong earthquake seismic vibration or the hanging-wall effect. Far-field weak vibrations can also accelerate landslides. Additionally, we discovered that the earthquake made the unstable slopes move more quickly but also tended to stabilize the slopes that were already in motion before the earthquake. The various response modes of slow-moving landslides to seismic events are related not only to the intensity of seismic vibration but also to the geological conditions of the region and to the size of the landslide itself. These findings are extremely valuable for studying the mechanism of earthquake-affected landslides. [ABSTRACT FROM AUTHOR]

As a by-product of Interferometric Synthetic Aperture Radar (SAR, InSAR) technique, interferometric coherence is a measure of the decorrelation noise for InSAR observation, where the lower the coherence value, the more serious the decorrelation noise. In the densely vegetated area, the coherence value could be too low to obtain any valuable signals, leading to the degradation of InSAR performance and the possible waste of expensive SAR data. Normalized Difference Vegetation Index (NDVI) value is a measure of the vegetation coverage and can be estimated from the freely available optical satellite images. In this paper, a multi-stage model is established to quantitatively estimate the decorrelation noise for vegetable areas based on Landsat-derived NDVI prior to the acquisition of SAR data. The modeling process is being investigated with the L-band ALOS-1/PALSAR-1 data and the Landsat-5 optical data acquired in the Meitanba area of Hunan Province, China. Furthermore, the reliability of the established model is verified in the Longhui area, which is situated near the Meitanba area. The results demonstrate that the established model can quantitatively estimate InSAR decorrelation associated with the vegetation coverage. [ABSTRACT FROM AUTHOR]

The excessive extraction and recharge of groundwater lead to long-time seasonal land subsidence in Los Angeles, USA, and especially in the Santa Ana basin. The rate of land subsidence in the Santa Ana basin has been rising, which could pose a danger to infrastructure and human lives. However, the most recent research on land surface deformation in the area was conducted using the traditional parameter estimation method, resulting in little understanding of the regional spatiotemporal characteristics. The parametric method consists of a least square linear inversion, using the pre-defined mathematical geometric or geophysical theoretical models to describe groundwater deformation, and it requires precise external environmental variables and accurate geophysical parameters, which are more difficult to implement. In this study, multitemporal InSAR-derived deformation time series are analyzed by using 69 descending C-band Sentinel-1A SAR scenes acquired from 2015 to 2018. A method based on independent component analysis (ICA) is applied to characterize the spatial pattern and temporal evolution of land subsidence in the Santa Ana basin. The results reveal two different spatial and temporal deformation patterns in the basin. First, a widespread seasonal deformation is identified by the first component, related to annual seasonal groundwater level changes, and the overall deformation shows a concentrated spatial pattern. The second component captures a long-term signal with a large-scale spatial pattern. For quantitative assessment, the obtained deformation time series are compared with the GNSS data, validating an accuracy of millimeters. We further calculate the cross-correlation coefficient and the elastic skeletal storage coefficient from the ICA-derived seasonal deformation and groundwater level, which reveals that the deformation responds quickly (i.e., a lag of 8 days) to the change in groundwater and the Santa Ana aquifer retains almost the same elasticity for at least 15 years. Quantifying the spatiotemporal characteristics of the deformation in the Santa Ana basin can provide a reference for the monitoring and managing of groundwater. [ABSTRACT FROM AUTHOR]

Ground deformation is the direct manifestation of the earth-rock dam's hazard potential. Therefore, it is essential to monitor deformation for dam warning and security evaluation. The Liuduzhai Dam, a clay-core dam of a large reservoir in China, was reinforced with plastic concrete cut-off walls between 13 January 2009 and 29 May 2010, as it was subject to leakage and deformation. However, the deformation development and the mechanism of the dam are still unclear. In this study, the deformation fields before and after the reinforcement of the Liuduzhai Dam were yielded by using the Interferometric Synthetic Aperture Radar (InSAR) technique. Furthermore, a numerical simulation method was employed to obtain the dynamic seepage field of the dam during the InSAR observation period. The results indicated that the average deformation velocity and maximum deformation velocity are −11.7 mm/yr and −22.5 mm/yr, respectively, and the cumulative displacement exceeds 100 mm, which shows typical continuous growth characteristics in a time series. In contrast, the dam deformation tended to be stable after reinforcement, with the average deformation velocity and maximum deformation velocity being −0.4 mm/yr and −1.2 mm/yr, respectively, behaving as cyclical deformation time series. According to the results of InSAR and seepage analysis, it is shown that: (1) dynamic seepage was the main mechanism controlling dam deformation prior to reinforcement; (2) the concentrated load caused by construction and the rapid dissipation of pore water pressure caused by the sudden drop of the infiltration line were the reasons for the acceleration of deformation during and after construction; and (3) the plastic concrete cut-off walls effectively reduced the dynamic seepage field, while the water level fluctuations were the main driving factor of elastic deformation of the dam after reinforcement. This study provides a novel approach to investigating the deformation mechanism of earth-rock dams. Furthermore, it has been confirmed that InSAR can identify the seepage deformation of dams by detecting surface movements. It is recommended that InSAR deformation monitoring should be incorporated into future dam safety programs to provide detailed deformation signals. By analyzing the temporal and spatial characteristics of the deformation signal, we can identify areas where dam performance has degraded. This crucial information aids in conducting a comprehensive dam safety assessment. [ABSTRACT FROM AUTHOR]

The 8 January 2022 Mw6.7 Menyuan earthquake was generated in the transition zone between the western Lenglongling fault and the eastern Tuolaishan fault, both being part of the Qilian–Haiyuan fault system with an important role in the adjustment of the regional tectonic regime. In this study, four pairs of SAR (synthetic aperture radar) data from Sentinel-1 and ALOS-2 (Advanced Land Observation Satellite-2) satellites were used to derive the surface displacement observations along the satellite line-of-sight (LOS) and azimuth directions using the differential interferometric SAR (InSAR, DInSAR), pixel offset-tracking (POT), multiple aperture InSAR (MAI), and burst overlap InSAR (BOI) methods. An SM-VCE method (i.e., a method for measuring three-dimensional (3D) surface displacements with InSAR based on a strain model and variance component estimation) was employed to combine these derived SAR displacement observations to calculate the 3D co-seismic displacements. Results indicate that the 2022 Menyuan earthquake was dominated by left-lateral slip, and the maximum horizontal and vertical displacements were 1.9 m and 0.6 m, respectively. The relative horizontal surface displacement across the fault was as large as 2–3 m, and the fault-parallel displacement magnitude was larger on the southern side of the fault compared with the northern side. Furthermore, three co-seismic strain invariants were also investigated, revealing that the near-fault area suffered severe deformation, and two obviously expanding and compressed zones were identified. We provide displacements/strains derived in this study in the prevailing geotiff format, which will be useful for the broad community studying this earthquake; in addition, the SM-VCE code used in this study is open to the public so that readers can better understand the method. [ABSTRACT FROM AUTHOR]

The Antarctic is one of the most sensitive areas to climate change, and ice velocity is a fundamental parameter for quantitatively assessing the glacier mass balance. Interferometric synthetic aperture radar (InSAR), a powerful tool for monitoring surface deformation with the advantages of having high precision and wide coverage, has been widely used in determining ice velocity in the Antarctic. However, the mapping of complete three-dimensional (3D) ice velocities is greatly limited by the imaging geometries and digital elevation model (DEM)-induced errors. In this study, we propose the integration of multibaseline and multiaperture InSAR measurements from the ENVISAT ASAR datasets to derive complete 3D ice velocities in the Grove Mountains area of the Antarctic. The results show that the estimated complete 3D ice velocities are in good agreement with MEaSUREs and GPS observations. Compared with the conventional 2D and quasi-3D ice velocities, the complete 3D ice velocities can effectively eliminate the effects of DEM errors and elevation changes and are also capable of retrieving the thickness change of the ice, which provides important information on the origin of mass transition. [ABSTRACT FROM AUTHOR]