Search

As a by-product of Interferometric Synthetic Aperture Radar (SAR, InSAR) technique, interferometric coherence is a measure of the decorrelation noise for InSAR observation, where the lower the coherence value, the more serious the decorrelation noise. In the densely vegetated area, the coherence value could be too low to obtain any valuable signals, leading to the degradation of InSAR performance and the possible waste of expensive SAR data. Normalized Difference Vegetation Index (NDVI) value is a measure of the vegetation coverage and can be estimated from the freely available optical satellite images. In this paper, a multi-stage model is established to quantitatively estimate the decorrelation noise for vegetable areas based on Landsat-derived NDVI prior to the acquisition of SAR data. The modeling process is being investigated with the L-band ALOS-1/PALSAR-1 data and the Landsat-5 optical data acquired in the Meitanba area of Hunan Province, China. Furthermore, the reliability of the established model is verified in the Longhui area, which is situated near the Meitanba area. The results demonstrate that the established model can quantitatively estimate InSAR decorrelation associated with the vegetation coverage. [ABSTRACT FROM AUTHOR]

Ground deformation is the direct manifestation of the earth-rock dam's hazard potential. Therefore, it is essential to monitor deformation for dam warning and security evaluation. The Liuduzhai Dam, a clay-core dam of a large reservoir in China, was reinforced with plastic concrete cut-off walls between 13 January 2009 and 29 May 2010, as it was subject to leakage and deformation. However, the deformation development and the mechanism of the dam are still unclear. In this study, the deformation fields before and after the reinforcement of the Liuduzhai Dam were yielded by using the Interferometric Synthetic Aperture Radar (InSAR) technique. Furthermore, a numerical simulation method was employed to obtain the dynamic seepage field of the dam during the InSAR observation period. The results indicated that the average deformation velocity and maximum deformation velocity are −11.7 mm/yr and −22.5 mm/yr, respectively, and the cumulative displacement exceeds 100 mm, which shows typical continuous growth characteristics in a time series. In contrast, the dam deformation tended to be stable after reinforcement, with the average deformation velocity and maximum deformation velocity being −0.4 mm/yr and −1.2 mm/yr, respectively, behaving as cyclical deformation time series. According to the results of InSAR and seepage analysis, it is shown that: (1) dynamic seepage was the main mechanism controlling dam deformation prior to reinforcement; (2) the concentrated load caused by construction and the rapid dissipation of pore water pressure caused by the sudden drop of the infiltration line were the reasons for the acceleration of deformation during and after construction; and (3) the plastic concrete cut-off walls effectively reduced the dynamic seepage field, while the water level fluctuations were the main driving factor of elastic deformation of the dam after reinforcement. This study provides a novel approach to investigating the deformation mechanism of earth-rock dams. Furthermore, it has been confirmed that InSAR can identify the seepage deformation of dams by detecting surface movements. It is recommended that InSAR deformation monitoring should be incorporated into future dam safety programs to provide detailed deformation signals. By analyzing the temporal and spatial characteristics of the deformation signal, we can identify areas where dam performance has degraded. This crucial information aids in conducting a comprehensive dam safety assessment. [ABSTRACT FROM AUTHOR]

The 8 January 2022 Mw6.7 Menyuan earthquake was generated in the transition zone between the western Lenglongling fault and the eastern Tuolaishan fault, both being part of the Qilian–Haiyuan fault system with an important role in the adjustment of the regional tectonic regime. In this study, four pairs of SAR (synthetic aperture radar) data from Sentinel-1 and ALOS-2 (Advanced Land Observation Satellite-2) satellites were used to derive the surface displacement observations along the satellite line-of-sight (LOS) and azimuth directions using the differential interferometric SAR (InSAR, DInSAR), pixel offset-tracking (POT), multiple aperture InSAR (MAI), and burst overlap InSAR (BOI) methods. An SM-VCE method (i.e., a method for measuring three-dimensional (3D) surface displacements with InSAR based on a strain model and variance component estimation) was employed to combine these derived SAR displacement observations to calculate the 3D co-seismic displacements. Results indicate that the 2022 Menyuan earthquake was dominated by left-lateral slip, and the maximum horizontal and vertical displacements were 1.9 m and 0.6 m, respectively. The relative horizontal surface displacement across the fault was as large as 2–3 m, and the fault-parallel displacement magnitude was larger on the southern side of the fault compared with the northern side. Furthermore, three co-seismic strain invariants were also investigated, revealing that the near-fault area suffered severe deformation, and two obviously expanding and compressed zones were identified. We provide displacements/strains derived in this study in the prevailing geotiff format, which will be useful for the broad community studying this earthquake; in addition, the SM-VCE code used in this study is open to the public so that readers can better understand the method. [ABSTRACT FROM AUTHOR]

The Antarctic is one of the most sensitive areas to climate change, and ice velocity is a fundamental parameter for quantitatively assessing the glacier mass balance. Interferometric synthetic aperture radar (InSAR), a powerful tool for monitoring surface deformation with the advantages of having high precision and wide coverage, has been widely used in determining ice velocity in the Antarctic. However, the mapping of complete three-dimensional (3D) ice velocities is greatly limited by the imaging geometries and digital elevation model (DEM)-induced errors. In this study, we propose the integration of multibaseline and multiaperture InSAR measurements from the ENVISAT ASAR datasets to derive complete 3D ice velocities in the Grove Mountains area of the Antarctic. The results show that the estimated complete 3D ice velocities are in good agreement with MEaSUREs and GPS observations. Compared with the conventional 2D and quasi-3D ice velocities, the complete 3D ice velocities can effectively eliminate the effects of DEM errors and elevation changes and are also capable of retrieving the thickness change of the ice, which provides important information on the origin of mass transition. [ABSTRACT FROM AUTHOR]