Search

Terahertz video synthetic aperture radar (THz-ViSAR) has tremendous research and application value due to its high resolution and high frame rate imaging benefits. However, it requires more efficient imaging algorithms. Thus, a novel multistage back projection fast imaging algorithm for the THz-ViSAR system is proposed in this paper to enable continuous playback of images like video. The radar echo data of the entire aperture is first divided into multiple sub-apertures, as with the fast-factorized back projection algorithm (FFBP). However, there are two improvements in sub-aperture imaging. On the one hand, the back projection algorithm (BPA) is replaced by the polar format algorithm (PFA) to improve the sub-aperture imaging efficiency. The imaging process, on the other hand, uses the global Cartesian coordinate system rather than the local polar coordinate system, and the wavenumber domain data of the full aperture are obtained step by step through simple splicing and fusion, avoiding the amount of two-dimensional (2D) interpolation operations required for local polar coordinate system transformation in FFBP. Finally, 2D interpolation for full-resolution images is carried out to image the ground object targets in the same coordinate system due to the geometric distortion caused by linear phase error (LPE) and the mismatch of coordinate systems in different imaging frames. The simulation experiments of point targets and surface targets both verify the effectiveness and superiority of the proposed algorithm. Under the same conditions, the running time of the proposed algorithm is only about 6% of FFBP, while the imaging quality is guaranteed. [ABSTRACT FROM AUTHOR]

Designing synthetic-aperture radar image formation systems can be challenging due to the numerous options of algorithms and devices that can be used. There are many SAR image formation algorithms, such as backprojection, matched-filter, polar format, Range–Doppler and chirp scaling algorithms. Each algorithm presents its own advantages and disadvantages considering efficiency and image quality; thus, we aim to introduce some of the most common SAR image formation algorithms and compare them based on these two aspects. Depending on the requisites of each individual system and implementation, there are many device options to choose from, for instance, FPGAs, GPUs, CPUs, many-core CPUs, and microcontrollers. We present a review of the state of the art of SAR imaging systems implementations. We also compare such implementations in terms of power consumption, execution time, and image quality for the different algorithms used. [ABSTRACT FROM AUTHOR]

Autonomous navigation airborne forward-looking synthetic aperture radar (SAR) observes the anterior inferior wide area with a short cross-track dimensional linear array as azimuth aperture. This is an application scenario that is drastically different from that of side-looking space-borne or air-borne SAR systems, which acquires azimuth synthetic aperture with along-track dimension platform movement. High precision imaging with a combination of pseudo-polar formatting and overlapped sub-aperture algorithm for autonomous navigation airborne forward-looking SAR imaging is presented. With the suggested imaging method, range dimensional imaging is operated with wide band signal compression. Then, 2D pseudo-polar formatting is operated. In the following, azimuth synthetic aperture is divided into several overlapped sub-apertures. Intra sub-aperture IFFT (Inverse Fast Fourier Transform), wave front curvature phase error compensation, and inter sub-aperture IFFT are operated sequentially to finish azimuth high precision imaging. The main advantage of the proposed algorithm is its extremely high precision and low memory cost. The effectiveness and performance of the proposed algorithm are demonstrated with outdoor GBSAR (Ground Based Synthetic Aperture Radar) experiments, which possesses the same imaging geometry as the airborne forward-looking SAR (short azimuth aperture, wide azimuth swath). The profile response of the trihedral angle reflectors, placed in the imaging scene, reconstructed with the proposed imaging algorithm and back projection algorithm are compared and analyzed. [ABSTRACT FROM AUTHOR]

In multiple-input-multiple-output synthetic aperture radar (MIMO-SAR) systems, sparse arrays are usually applied, resulting in increased sidelobes of the point spread function. In this paper, a phase shift migration (PSM) imaging algorithm based on the explosion reflection model with modified coherent factor was proposed for sidelobe suppression in MIMO-SAR three-dimensional (3D) imaging application. By defining the virtual difference wavenumber, reconstructing the raw echo by data rearrangement in wavenumber domain, the original coherent factor algorithm operating in spatial domain can be achieved by the PSM algorithm frame in the wavenumber domain, which means two orders of magnitude increase in computational efficiency. The correctness of the theory is verified by simulation. Finally, a bistatic prototype imaging system in the 0.3 THz band was designed for the proof-of-principle experiments. The experimental results show that the proposed algorithm has a 0.948 structural similarity value to the original coherent factor back-projection algorithm (CF-BPA) which means comparable image quality with much superior efficiency. [ABSTRACT FROM AUTHOR]