Search

Canopy height data from the Global Ecosystem Dynamics Investigation (GEDI) mission has powered the development of global forest height products, but these data and products have not been validated in non-forest tree plantation settings. In this study, we collected field observations of the canopy heights throughout oil palm plantations in Nigeria and evaluated the performance of existing global canopy height map (CHM) products as well as a local model trained on the GEDI and various Landsat and Sentinel-2 feature combinations. We found that existing CHMs fared poorly in the region, with mean absolute errors (MAE) of 4.2–6.2 m. However, the locally trained models performed well (MAE = 2.5 m), indicating that using the GEDI and optical satellite data can still be effective, even in a region with relatively sparse GEDI coverage. In addition to improved overall performance, the local model was especially effective at reducing errors for short (<5 m) trees, where the global products struggle to capture the canopy height. [ABSTRACT FROM AUTHOR]

Accurate identification of individual tree species (ITS) is crucial to forest management. However, current ITS identification methods are mainly based on traditional image features or deep learning. Traditional image features are more interpretative, but the generalization and robustness of such methods are inferior. In contrast, deep learning based approaches are more generalizable, but the extracted features are not interpreted; moreover, the methods can hardly be applied to limited sample sets. In this study, to further improve ITS identification, typical spectral and texture image features were weighted to assist deep learning models for ITS identification. To validate the hybrid models, two experiments were conducted; one on the dense forests of the Huangshan Mountains, Anhui Province and one on the Gaofeng forest farm, Guangxi Province, China. The experimental results demonstrated that with the addition of image features, different deep learning ITS identification models, such as DenseNet, AlexNet, U-Net, and LeNet, with different limited sample sizes (480, 420, 360), were all enhanced in both study areas. For example, the accuracy of DenseNet model with a sample size of 480 were improved to 87.67% from 85.41% in Huangshan. This hybrid model can effectively improve ITS identification accuracy, especially for UAV aerial imagery or limited sample sets, providing the possibility to classify ITS accurately in sample-poor areas. [ABSTRACT FROM AUTHOR]

The accurate classification of single tree species in forests is important for assessing species diversity and estimating forest productivity. However, few studies have explored the influence of canopy morphological characteristics on the classification of tree species. Therefore, based on UAV LiDAR and hyperspectral data, in this study, we designed various classification schemes for the main tree species in the study area, i.e., birch, Manchurian ash, larch, Ulmus, and mongolica, in order to explore the effects of different data sources, classifiers, and canopy morphological features on the classification of a single tree species. The results showed that the classification accuracy of a single tree species using multisource remote sensing data was greater than that based on a single data source. The classification results of three different classifiers were compared, and the random forest and support vector machine classifiers exhibited similar classification accuracies, with overall accuracies above 78%. The BP neural network classifier had the lowest classification accuracy of 75.8%. The classification accuracy of all three classifiers for tree species was slightly improved when UAV LiDAR-extracted canopy morphological features were added to the classifier, indicating that the addition of canopy morphological features has a certain relevance for the classification of single tree species. [ABSTRACT FROM AUTHOR]

The European Space Agency's Sentinel satellites have laid the foundation for global land use land cover (LULC) mapping with unprecedented detail at 10 m resolution. We present a cross-comparison and accuracy assessment of Google's Dynamic World (DW), ESA's World Cover (WC) and Esri's Land Cover (Esri) products for the first time in order to inform the adoption and application of these maps going forward. For the year 2020, the three global LULC maps show strong spatial correspondence (i.e., near-equal area estimates) for water, built area, trees and crop LULC classes. However, relative to one another, WC is biased towards over-estimating grass cover, Esri towards shrub and scrub cover and DW towards snow and ice. Using global ground truth data with a minimum mapping unit of 250 m2, we found that Esri had the highest overall accuracy (75%) compared to DW (72%) and WC (65%). Across all global maps, water was the most accurately mapped class (92%), followed by built area (83%), tree cover (81%) and crops (78%), particularly in biomes characterized by temperate and boreal forests. The classes with the lowest accuracies, particularly in the tundra biome, included shrub and scrub (47%), grass (34%), bare ground (57%) and flooded vegetation (53%). When using European ground truth data from LUCAS (Land Use/Cover Area Frame Survey) with a minimum mapping unit of <100 m2, we found that WC had the highest accuracy (71%) compared to DW (66%) and Esri (63%), highlighting the ability of WC to resolve landscape elements with more detail compared to DW and Esri. Although not analyzed in our study, we discuss the relative advantages of DW due to its frequent and near real-time data delivery of both categorical predictions and class probability scores. We recommend that the use of global LULC products should involve critical evaluation of their suitability with respect to the application purpose, such as aggregate changes in ecosystem accounting versus site-specific change detection in monitoring, considering trade-offs between thematic resolution, global versus. local accuracy, class-specific biases and whether change analysis is necessary. We also emphasize the importance of not estimating areas from pixel-counting alone but adopting best practices in design-based inference and area estimation that quantify uncertainty for a given study area. [ABSTRACT FROM AUTHOR]

Forest height is an essential parameter used to derive important information about forest ecosystems, such as forest above-ground biomass. In this article, a forest height estimation approach combining P-band and X-band interferometric synthetic aperture radar (InSAR) was introduced. The forest height was estimated using the difference in the penetration of long- and short-wavelength radars to the forest. That is, the P-band and X-band InSAR data were used to extract the digital terrain model (DTM) and digital surface model (DSM), respectively. For the DTM, an improved time-frequency (TF) analysis method was used to reduce the effect of forest scatterers on the extraction of a pure understory terrain phase based on P-band InSAR. For the DSM, a novel compensation algorithm based on a multi-layer model (MLM) was proposed to remove the penetration bias of the X-band. Compared to the existing method based on the infinitely deep uniform volumes (IDUV) model, the MLM-based method is more in line with the characteristics of forest structure and the scattering mechanism for X-band InSAR. The airborne P-band repeat-pass InSAR and spaceborne X-band (TanDEM-X) single-pass InSAR data were used to verify the proposed method over the study area in the Saihanba Forest Farm in Hebei, China. The results demonstrated that the improved TF method can achieve high-precision DTM extraction based on P-band InSAR data, and the root mean square error (RMSE) was 0.94 m. The proposed MLM-based compensation method of the DSM achieved a smaller error (RMSE: 1.67 m) compared to the IDUV-based method (RMSE: 3.01 m). Under the same DTM extracted by P-band InSAR, the estimation accuracy of forest height based on the MLM method was 86.58% (RMSE: 1.81 m), which was 8.49% higher than that of the IDUV-based method (RMSE: 2.98 m). [ABSTRACT FROM AUTHOR]

Mapping smallholder fruit plantations using optical data is challenging due to morphological landscape heterogeneity and crop types having overlapping spectral signatures. Furthermore, cloud covers limit the use of optical sensing, especially in subtropical climates where they are persistent. This research assessed the effectiveness of Sentinel-1 (S1) and Sentinel-2 (S2) data for mapping fruit trees and co-existing land-use types by using support vector machine (SVM) and random forest (RF) classifiers independently. These classifiers were also applied to fused data from the two sensors. Feature ranks were extracted using the RF mean decrease accuracy (MDA) and forward variable selection (FVS) to identify optimal spectral windows to classify fruit trees. Based on RF MDA and FVS, the SVM classifier resulted in relatively high classification accuracy with overall accuracy (OA) = 0.91.6% and kappa coefficient = 0.91% when applied to the fused satellite data. Application of SVM to S1, S2, S2 selected variables and S1S2 fusion independently produced OA = 27.64, Kappa coefficient = 0.13%; OA= 87%, Kappa coefficient = 86.89%; OA = 69.33, Kappa coefficient = 69. %; OA = 87.01%, Kappa coefficient = 87%, respectively. Results also indicated that the optimal spectral bands for fruit trees mapping are green (B3) and SWIR_2 (B10) for S2, whereas for S1, the vertical-horizontal (VH) polarization band. Including the textural metrics from the VV channel improved crop discrimination and co-existing land use cover types. The fusion approach proved robust and well suited for accurate smallholder fruit plantation mapping. [ABSTRACT FROM AUTHOR]

Canopy closure, which is the ratio of the vertical projection area of the crowns to the area of forest land, can indicate the growth and tending situation of a forest and is of great significance for forest management planning. In this study, a geometric-optical model (GOST model) was used to simulate the canopy gap fraction of a forest. Then, a canopy closure estimation method using the gap fraction was discussed. In this study, three typical planted forest farms (the Mengjiagang (MJG), Gaofeng (GF), and Wangyedian (WYD) forest farms) containing the most commonly planted tree species in the north and south regions of China were selected, and field measurements were executed. The results show that the gap fraction (Pvg-c) had a higher correlation with the average projected area of the tree crowns, and the relationship was an exponential function, with R2 and RMSE values of 0.5619 and 0.0723, respectively. Finally, the applicability and accuracy of this method were evaluated using line transects, and a fisheye camera measured the canopy closure. The accuracy of the canopy closure estimated by the Pvg-c was 86.69%. This research can provide a reference for canopy closure estimation using a geometric-optical model. [ABSTRACT FROM AUTHOR]

Toward Large-Scale Mapping of Tree Crops with High-Resolution Satellite Imagery and Deep Learning Algorithms: A Case Study of Olive Orchards in Morocco. The authors used a solid line in the map that may infer the non-sovereignty of Morocco over its Sahara and have updated the map. References 1 Lin C., Jin Z., Mulla D., Ghosh R., Guan K., Kumar V., Cai Y. Toward Large-Scale Mapping of Tree Crops with High-Resolution Satellite Imagery and Deep Learning Algorithms: A Case Study of Olive Orchards in Morocco. [Extracted from the article]

LiDAR (Light Detection and Ranging) technology has been used to obtain geometrical attributes of tree crops in small field plots, sometimes using manual steps in data processing. The objective of this study was to develop a method for estimating canopy volume and height based on a mobile terrestrial laser scanner suited for large commercial orange groves. A 2D LiDAR sensor and a GNSS (Global Navigation Satellite System) receiver were mounted on a vehicle for data acquisition. A georeferenced point cloud representing the laser beam impacts on the crop was created and later classified into transversal sections along the row or into individual trees. The convex-hull and the alpha-shape reconstruction algorithms were used to reproduce the shape of the tree crowns. Maps of canopy volume and height were generated for a 25 ha orange grove. The different options of data processing resulted in different values of canopy volume. The alpha-shape algorithm was considered a good option to represent individual trees whereas the convex-hull was better when representing transversal sections of the row. Nevertheless, the canopy volume and height maps produced by those two methods were similar. The proposed system is useful for site-specific management in orange groves. [ABSTRACT FROM AUTHOR]

Unmanned Aerial Vehicles (UAVs) are being increasingly used to monitor topographic changes in coastal areas. Compared to Light Detection And Ranging (LiDAR) data or Terrestrial Laser Scanning data, this solution is low-cost and easy to use, while allowing the production of a Digital Surface Model (DSM) with a similar accuracy. Three campaigns were carried out within a three-month period at a lagoon-inlet system (Bonne-Anse Bay, La Palmyre, France), with a flying wing (eBee) combined with a digital camera. Ground Control Points (GCPs), surveyed by the Global Navigation Satellite System (GNSS) and post-processed by differential correction, allowed georeferencing DSMs. Using a photogrammetry process (Structure From Motion algorithm), DSMs and orthomosaics were produced. The DSM accuracy was assessed against the ellipsoidal height of a GNSS profile and Independent Control Points (ICPs) and the root mean square discrepancies were about 10 and 17 cm, respectively. Compared to traditional topographic surveys, this solution allows the accurate representation of bedforms with a wavelength of the order of 1 m and a height of 0.1 m. Finally, changes identified between both main campaigns revealed erosion/accretion areas and the progradation of a sandspit. These results open new perspectives to validate detailed morphological predictions or to parameterize bottom friction in coastal numerical models. [ABSTRACT FROM AUTHOR]

Accurate maps of surface water are essential for many environmental applications. Surface water maps can be generated by combining measurements from multiple sources. Precise estimation of surface water using satellite imagery remains a challenging task due to the sensor limitations, complex land cover, topography, and atmospheric conditions. As a complementary dataset, in the case of hilly landscapes, a drainage network can be extracted from high-resolution digital elevation models. Additionally, Volunteered Geographic Information (VGI) initiatives, such as OpenStreetMap, can also be used to produce high-resolution surface water masks. In this study, we derive a high-resolution water mask using Landsat 8 imagery and OpenStreetMap as well as (potential) a drainage network using 30 m SRTM. Our approach to derive a surface water mask from Landsat 8 imagery comprises the use of a lower 15% percentile of Landsat 8 Top of Atmosphere (TOA) reflectance from 2013 to 2015. We introduce a new non-parametric unsupervised method based on the Canny edge filter and Otsu thresholding to detect water in flat areas. For hilly areas, the method is extended with an additional supervised classification step used to refine the water mask. We applied the method across the Murray-Darling basin, Australia. Differences between our new Landsat-based water mask and the OpenStreetMap water mask regarding positional differences along the rivers and overall coverage were analyzed. Our results show that about 50% of the OpenStreetMap linear water features can be confirmed using the water mask extracted from Landsat 8 imagery and the drainage network derived from SRTM. We also show that the observed distances between river features derived from OpenStreetMap and Landsat 8 are mostly smaller than 60 m. The differences between the new water mask and SRTM-based linear features and hilly areas are slightly larger (110 m). The overall agreement between OpenStreetMap and Landsat 8 water masks is about 30%. [ABSTRACT FROM AUTHOR]

The Himalayan mountain forest ecosystem has been degrading since the British ruled the area in the 1850s. Local understanding of the patterns and processes of degradation is desperately required to devise management strategies to halt this degradation and provide long-term sustainability. This work comprises a satellite image based study in combination with national expert validation to generate sub-district level statistics for forest cover over theWestern Himalaya, Pakistan, which accounts for approximately 67% of the total forest cover of the country. The time series of forest cover maps (1990, 2000, 2010) reveal extensive deforestation in the area. Indeed, approximately 170,684 ha of forest has been lost, which amounts to 0.38% per year clear cut or severely degraded during the last 20 years. A significant increase in the rate of deforestation is observed in the second half of the study period, where much of the loss occurs at the western borders along with Afghanistan. The current study is the first systematic and comprehensive effort to map changes to forest cover in Northern Pakistan. Deforestation hotspots identified at the sub-district level provide important insight into deforestation patterns, which may facilitate the development of appropriate forest conservation and management strategies in the country. [ABSTRACT FROM AUTHOR]

Crop type classification is critical for crop production estimation and optimal water allocation. Crop type data are challenging to generate if crop reference data are lacking, especially for target years with reference data missed in collection. Is it possible to transfer a trained crop type classification model to retrace the historical spatial distribution of crop types? Taking the Hetao Irrigation District (HID) in China as the study area, this study first designed a 10 m crop type classification framework based on the Google Earth Engine (GEE) for crop type mapping in the current season. Then, its interannual transferability to accurately retrace historical crop distributions was tested. The framework used Sentinel-1/2 data as the satellite data source, combined percentile, and monthly composite approaches to generate classification metrics and employed a random forest classifier with 300 trees for crop classification. Based on the proposed framework, this study first developed a 10 m crop type map of the HID for 2020 with an overall accuracy (OA) of 0.89 and then obtained a 10 m crop type map of the HID for 2019 with an OA of 0.92 by transferring the trained model for 2020 without crop reference samples. The results indicated that the designed framework could effectively identify HID crop types and have good transferability to obtain historical crop type data with acceptable accuracy. Our results found that SWIR1, Green, and Red Edge2 were the top three reflectance bands for crop classification. The land surface water index (LSWI), normalized difference water index (NDWI), and enhanced vegetation index (EVI) were the top three vegetation indices for crop classification. April to August was the most suitable time window for crop type classification in the HID. Sentinel-1 information played a positive role in the interannual transfer of the trained model, increasing the OA from 90.73% with Sentinel 2 alone to 91.58% with Sentinel-1 and Sentinel-2 together. [ABSTRACT FROM AUTHOR]

Agroforestry systems (AFS) can provide positive ecosystem services while at the same time stabilizing yields under increasingly common drought conditions. The effect of distance to trees in alley cropping AFS on yield-related crop parameters has predominantly been studied using point data from transects. Unmanned aerial vehicles (UAVs) offer a novel possibility to map plant traits with high spatial resolution and coverage. In the present study, UAV-borne red, green, blue (RGB) and multispectral imagery was utilized for the prediction of whole crop dry biomass yield (DM) and leaf area index (LAI) of barley at three different conventionally managed silvoarable alley cropping agroforestry sites located in Germany. DM and LAI were modelled using random forest regression models with good accuracies (DM: R² 0.62, nRMSEp 14.9%, LAI: R² 0.92, nRMSEp 7.1%). Important variables for prediction included normalized reflectance, vegetation indices, texture and plant height. Maps were produced from model predictions for spatial analysis, showing significant effects of distance to trees on DM and LAI. Spatial patterns differed greatly between the sampled sites and suggested management and soil effects overriding tree effects across large portions of 96 m wide crop alleys, thus questioning alleged impacts of AFS tree rows on yield distribution in intensively managed barley populations. Models based on UAV-borne imagery proved to be a valuable novel tool for prediction of DM and LAI at high accuracies, revealing spatial variability in AFS with high spatial resolution and coverage. [ABSTRACT FROM AUTHOR]

Timely and accurate monitoring of tree crop extent and productivities are necessary for informing policy-making and investments. However, except for a very few tree species (e.g., oil palms) with obvious canopy and extensive planting, most small-crown tree crops are understudied in the remote sensing domain. To conduct large-scale small-crown tree mapping, several key questions remain to be answered, such as the choice of satellite imagery with different spatial and temporal resolution and model generalizability. In this study, we use olive trees in Morocco as an example to explore the two abovementioned questions in mapping small-crown orchard trees using 0.5 m DigitalGlobe (DG) and 3 m Planet imagery and deep learning (DL) techniques. Results show that compared to DG imagery whose mean overall accuracy (OA) can reach 0.94 and 0.92 in two climatic regions, Planet imagery has limited capacity to detect olive orchards even with multi-temporal information. The temporal information of Planet only helps when enough spatial features can be captured, e.g., when olives are with large crown sizes (e.g., >3 m) and small tree spacings (e.g., <3 m). Regarding model generalizability, experiments with DG imagery show a decrease in F1 score up to 5% and OA to 4% when transferring models to new regions with distribution shift in the feature space. Findings from this study can serve as a practical reference for many other similar mapping tasks (e.g., nuts and citrus) around the world. [ABSTRACT FROM AUTHOR]

An efficient and accurate forest sample plot survey is of great significance to understand the current status of forest resources at the stand or regional scale and the basis of scientific forest management. Close-range photogrammetry (CRP) technology can easily and quickly collect sequence images with high overlapping to reconstruct the 3D model of forest scenes and extract the individual tree parameters automatically and, therefore, can greatly improve the efficiency of forest investigation and has great application potential in forestry visualization management. However, it has some issues in practical forestry applications. First, the imaging quality is affected by the illumination in the forest, resulting in difficulty in feature matching and low accuracy of parameter extraction. Second, the efficiency of 3D forest model reconstruction is limited under complex understory vegetation or the topographic situation in the forest. In addition, the density of point clouds by dense matching directly affects the accuracy of individual tree parameter extraction. This research collected the sequence images of sample plots of four tree species by smartphones in Gaofeng Forest Farm in Guangxi and Wangyedian Forest Farm in Mongolia to analyze the effects of image enhancement, feature detection and dense point cloud algorithms on the efficiency of 3D forest reconstruction and accuracy of individual tree parameter extraction, then proposed a strategy of 3D reconstruction and parameter extraction suitable for different forest scenes. First, we compared the image enhancement effects of median–Gaussian (MG) filtering, single-scale retinex (SSR) and multi-scale retinex (MSR) filtering algorithms. Then, an improved algorithm combining Harris corner detection with speeded-up robust features (SURF) feature detection (Harris+SURF) is proposed, and the feature matching effect is compared with that of a scale invariant feature transform (SIFT) operator. Third, according to the morphological characteristics of the trees in the sequence images, we used the iterative interpolation algorithm of a planar triangulation network based on geometric constraints (GC-based IIPTN) to increase the density of point clouds and reconstruct the 3D forest model, and then extract the position and DBH of the individual trees. The results show that MSR image enhancement can significantly increase the number of matched point pairs. The improved Harris+SURF method can reduce the reconstruction time of the 3D forest model, and the GC-based IIPTN algorithm can improve the accuracy of individual tree parameter extraction. The extracted position of the individual tree is the same as the measured position with the bias within 0.2 m. The accuracy of extracted DBH of Eucalyptus grandis, Taxus chinensis, Larix gmelinii and Pinus tabuliformis is 94%, 95%, 96% and 90%, respectively, which proves that the proposed 3D model reconstruction method based on image enhancement has great potential for tree position and DBH extraction, and also provides effective support for forest resource investigation and visualization management in the future. [ABSTRACT FROM AUTHOR]

The recent multi-year droughts in California have highlighted the heightened risk of longer and more intense droughts, thus increasing the interest in understanding potential impacts for major economic activities, such as agriculture. This study examines changes in cropping pattern in California's Central Valley between 2007 and 2016 in response to two consecutive droughts (2007–2009 and 2012–2016), factors driving these changes, and the impact of these changes on groundwater level. Results indicate that Central Valley experienced a shift in cropping pattern from alfalfa, cereals (rice, winter wheat, corn, and oats), and cotton, to nut (almonds, walnuts, and pistachios) and fruit (grapes, oranges, and tomatoes) tree crops. This shift in cropping pattern was likely driven by high crop prices, increasing trend in crop price, and increasing water pumping cost, particularly in the relatively water-stressed southern parts of Central Valley. While the total cropland water use for Central Valley remained the same during 2007–2016 (during both wet and dry years), they vary from county to county. Some counties experienced large reductions in cropland water use, while other counties experienced large increases in cropland water use, indicating the need for county-specific water resource management. The results also indicate that both land management (determining size of fallow land), as well as crop management (choice of crop types), are key factors in water resource management. [ABSTRACT FROM AUTHOR]

The spatial distribution of forest stands is one of the fundamental properties of forests. Timely and accurately obtained stand distribution can help people better understand, manage, and utilize forests. The development of remote sensing technology has made it possible to map the distribution of tree species in a timely and accurate manner. At present, a large amount of remote sensing data have been accumulated, including high-spatial-resolution images, time-series images, light detection and ranging (LiDAR) data, etc. However, these data have not been fully utilized. To accurately identify the tree species of forest stands, various and complementary data need to be synthesized for classification. A curve matching based method called the fusion of spectral image and point data (FSP) algorithm was developed to fuse high-spatial-resolution images, time-series images, and LiDAR data for forest stand classification. In this method, the multispectral Sentinel-2 image and high-spatial-resolution aerial images were first fused. Then, the fused images were segmented to derive forest stands, which are the basic unit for classification. To extract features from forest stands, the gray histogram of each band was extracted from the aerial images. The average reflectance in each stand was calculated and stacked for the time-series images. The profile curve of forest structure was generated from the LiDAR data. Finally, the features of forest stands were compared with training samples using curve matching methods to derive the tree species. The developed method was tested in a forest farm to classify 11 tree species. The average accuracy of the FSP method for ten performances was between 0.900 and 0.913, and the maximum accuracy was 0.945. The experiments demonstrate that the FSP method is more accurate and stable than traditional machine learning classification methods. [ABSTRACT FROM AUTHOR]

Mapping the distribution of forest resources at tree species levels is important due to their strong association with many quantitative and qualitative indicators. With the ongoing development of artificial intelligence technologies, the effectiveness of deep-learning classification models for high spatial resolution (HSR) remote sensing images has been proved. However, due to the poor statistical separability and complex scenarios, it is still challenging to realize fully automated and highly accurate forest types at tree species level mapping. To solve the problem, a novel end-to-end deep learning fusion method for HSR remote sensing images was developed by combining the advantageous properties of multi-modality representations and the powerful features of post-processing step to optimize the forest classification performance refined to the dominant tree species level in an automated way. The structure of the proposed model consisted of a two-branch fully convolutional network (dual-FCN8s) and a conditional random field as recurrent neural network (CRFasRNN), which named dual-FCN8s-CRFasRNN in the paper. By constructing a dual-FCN8s network, the dual-FCN8s-CRFasRNN extracted and fused multi-modality features to recover a high-resolution and strong semantic feature representation. By imbedding the CRFasRNN module into the network as post-processing step, the dual-FCN8s-CRFasRNN optimized the classification result in an automatic manner and generated the result with explicit category information. Quantitative evaluations on China's Gaofen-2 (GF-2) HSR satellite data showed that the dual-FCN8s-CRFasRNN provided a competitive performance with an overall classification accuracy (OA) of 90.10%, a Kappa coefficient of 0.8872 in the Wangyedian forest farm, and an OA of 74.39%, a Kappa coefficient of 0.6973 in the GaoFeng forest farm, respectively. Experiment results also showed that the proposed model got higher OA and Kappa coefficient metrics than other four recently developed deep learning methods and achieved a better trade-off between automaticity and accuracy, which further confirmed the applicability and superiority of the dual-FCN8s-CRFasRNN in forest types at tree species level mapping tasks. [ABSTRACT FROM AUTHOR]

Accurate estimates of tree crop orchard age and historical crop area are important to develop yield prediction algorithms, and facilitate improving accuracy in ongoing crop forecasts. This is particularly relevant for the increasingly productive macadamia industry in Australia, where knowledge of tree age, as well as total planted area, are important predictors of productivity, and the area devoted to macadamia orchards is rapidly increasing. We developed a technique to aggregate more than 30 years of historical imagery, generate summary tables from the data, and search multiple combinations of parameters to find the most accurate planting year prediction algorithm. This made use of known planting dates of more than 90 macadamia blocks spread across multiple growing regions. The selected algorithm achieved a planting year mean absolute error of 1.7 years. The algorithm was then applied to all macadamia features in east Australia, as defined in an recent Australian tree crops map, to determine the area planted per year and the total cumulative area of macadamia orchards in Australia. The area estimates were refined by improving the resolution of the mapped macadamia features, by removing non-productive areas based on an optimal vegetation index threshold. [ABSTRACT FROM AUTHOR]

Airborne Laser Scanning (ALS) and Terrestrial Laser Scanning (TLS) systems are useful tools for deriving horticultural tree structure estimates. However, there are limited studies to guide growers and agronomists on different applications of the two technologies for horticultural tree crops, despite the importance of measuring tree structure for pruning practices, yield forecasting, tree condition assessment, irrigation and fertilization optimization. Here, we evaluated ALS data against near coincident TLS data in avocado, macadamia and mango orchards to demonstrate and assess their accuracies and potential application for mapping crown area, fractional cover, maximum crown height, and crown volume. ALS and TLS measurements were similar for crown area, fractional cover and maximum crown height (coefficient of determination (R2) ≥ 0.94, relative root mean square error (rRMSE) ≤ 4.47%). Due to the limited ability of ALS data to measure lower branches and within crown structure, crown volume estimates from ALS and TLS data were less correlated (R2 = 0.81, rRMSE = 42.66%) with the ALS data found to consistently underestimate crown volume. To illustrate the effects of different spatial resolution, capacity and coverage of ALS and TLS data, we also calculated leaf area, leaf area density and vertical leaf area profile from the TLS data, while canopy height, tree row dimensions and tree counts) at the orchard level were calculated from ALS data. Our results showed that ALS data have the ability to accurately measure horticultural crown structural parameters, which mainly rely on top of crown information, and measurements of hedgerow width, length and tree counts at the orchard scale is also achievable. While the use of TLS data to map crown structure can only cover a limited number of trees, the assessment of all crown strata is achievable, allowing measurements of crown volume, leaf area density and vertical leaf area profile to be derived for individual trees. This study provides information for growers and horticultural industries on the capacities and achievable mapping accuracies of standard ALS data for calculating crown structural attributes of horticultural tree crops. [ABSTRACT FROM AUTHOR]

Lack of accurate and up-to-date data associated with irrigated areas and related irrigation amounts is hampering the full implementation and compliance of the Water Framework Directive (WFD). In this paper, we describe the framework that we developed and implemented within the DIANA project to map the actual extent of irrigated areas in the Campania region (Southern Italy) during the 2018 irrigation season. For this purpose, we considered 202 images from the Harmonized Landsat Sentinel-2 (HLS) products (57 images from Landsat 8 and 145 images from Sentinel-2). Such data were preprocessed in order to extract a multitemporal Normalized Difference Vegetation Index (NDVI) map, which was then smoothed through a gap-filling algorithm. We further integrated data coming from high-resolution (4 km) global satellite precipitation Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks (PERSIANN)-Cloud Classification System (CCS) products. We collected an extensive ground truth in the field represented by 2992 data points coming from three main thematic classes: bare soil and rainfed (class 0), herbaceous (class 1), and tree crop (class 2). This information was exploited to generate irrigated area maps by adopting a machine learning classification approach. We compared six different types of classifiers through a cross-validation approach and found that, in general, random forests, support vector machines, and boosted decision trees exhibited the best performances in terms of classification accuracy and robustness to different tested scenarios. We found an overall accuracy close to 90% in discriminating among the three thematic classes, which highlighted promising capabilities in the detection of irrigated areas from HLS products. [ABSTRACT FROM AUTHOR]

Tree species classification is important for the management and sustainable development of forest resources. Traditional object-oriented tree species classification methods, such as support vector machines, require manual feature selection and generally low accuracy, whereas deep learning technology can automatically extract image features to achieve end-to-end classification. Therefore, a tree classification method based on deep learning is proposed in this study. This method combines the semantic segmentation network U-Net and the feature extraction network ResNet into an improved Res-UNet network, where the convolutional layer of the U-Net network is represented by the residual unit of ResNet, and linear interpolation is used instead of deconvolution in each upsampling layer. At the output of the network, conditional random fields are used for post-processing. This network model is used to perform classification experiments on airborne orthophotos of Nanning Gaofeng Forest Farm in Guangxi, China. The results are then compared with those of U-Net and ResNet networks. The proposed method exhibits higher classification accuracy with an overall classification accuracy of 87%. Thus, the proposed model can effectively implement forest tree species classification and provide new opportunities for tree species classification in southern China. [ABSTRACT FROM AUTHOR]

Topographic correction can reduce the influences of topographic factors and improve the accuracy of forest tree species classification when using remote-sensing data to investigate forest resources. In this study, the Mount Taishan forest farm is the research area. Based on Landsat 8 OLI data and field survey subcompartment data, four topographic correction models (cosine model, C model, solar-canopy-sensor (SCS)+C model and empirical rotation model) were used on the Google Earth Engine (GEE) platform to carry out algorithmic data correction. Then, the tree species in the study area were classified by the random forest method. Combined with the tree species classification process, the topographic correction effects were analyzed, and the effects, advantages and disadvantages of each correction model were evaluated. The results showed that the SCS+C model and empirical rotation model were the best models in terms of visual effect, reducing the band standard deviation and adjusting the reflectance distribution. When we used the SCS+C model to correct the remote-sensing image, the total accuracy increased by 4% when using the full-coverage training areas to classify tree species and by nearly 13% when using the shadowless training area. In the illumination condition interval of 0.4–0.6, the inconsistency rate decreased significantly; however, the inconsistency rate increased with increasing illumination condition values. Topographic correction can enhance reflectance information in shaded areas and can significantly improve the image quality. Topographic correction can be used as a pretreatment method for forest species classification when the study area's dominant tree species are in a low light intensity area. [ABSTRACT FROM AUTHOR]

Within the context of precision agriculture, goods insurance, public subsidies, fire damage assessment, etc., accurate knowledge about the plant population in crops represents valuable information. In this regard, the use of Unmanned Aerial Vehicles (UAVs) has proliferated as an alternative to traditional plant counting methods, which are laborious, time demanding and prone to human error. Hence, a methodology for the automated detection, geolocation and counting of crop trees in intensive cultivation orchards from high resolution multispectral images, acquired by UAV-based aerial imaging, is proposed. After image acquisition, the captures are processed by means of photogrammetry to yield a 3D point cloud-based representation of the study plot. To exploit the elevation information contained in it and eventually identify the plants, the cloud is deterministically interpolated, and subsequently transformed into a greyscale image. This image is processed, by using mathematical morphology techniques, in such a way that the absolute height of the trees with respect to their local surroundings is exploited to segment the tree pixel-regions, by global statistical thresholding binarization. This approach makes the segmentation process robust against surfaces with elevation variations of any magnitude, or to possible distracting artefacts with heights lower than expected. Finally, the segmented image is analysed by means of an ad-hoc moment representation-based algorithm to estimate the location of the trees. The methodology was tested in an intensive olive orchard of 17.5 ha, with a population of 3919 trees. Because of the plot's plant density and tree spacing pattern, typical of intensive plantations, many occurrences of intra-row tree aggregations were observed, increasing the complexity of the scenario under study. Notwithstanding, it was achieved a precision of 99.92%, a sensibility of 99.67% and an F-score of 99.75%, thus correctly identifying and geolocating 3906 plants. The generated 3D point cloud reported root-mean square errors (RMSE) in the X, Y and Z directions of 0.73 m, 0.39 m and 1.20 m, respectively. These results support the viability and robustness of this methodology as a phenotyping solution for the automated plant counting and geolocation in olive orchards. [ABSTRACT FROM AUTHOR]

An integrated assessment of crop-energy-water (CEW) nexus is critical to understand the tradeoffs and synergies for better management of sustainable agricultural systems. In this study, we evaluate the historic evolution of CEW interactions in the Central Valley, California, a critical agricultural region that produces approximately 50% of US fruits, nuts and vegetables. Specifically, we consider three nexus elements, including water use for irrigation (blue water), energy use for groundwater pumping, and crop yield (for all crops aggregated, almond and cotton). To quantify the interactions between CEW elements, we estimate the water use for cropping (water footprint) and energy use for cropping (energy footprint). We conduct the analyses for four historical periods, i.e., 2007–2009 (Drought 1), 2010–2011 (Post-drought 1), 2012–2015 (Drought 2) and 2016–2018 (Post-drought 2). We find that the southern regions (San Joaquin and Tulare) are susceptible to greater stress on energy and water, especially during droughts. The groundwater footprint (GWF) has been continuously increasing due to greater crop water use and a shift from row crops to profitable water-intensive tree crops. The GWF in Tulare during Drought 2 was around 60% higher than Drought 1, where the GWF in Tulare was almost twice that of Sacramento. The energy and water uses for almond production have increased during the recent periods, whereas their uses have mostly decreased for cotton. On average, energy and water footprints under almond crop scenario are around 3–3.5 times as much as the footprints under all crops scenario. [ABSTRACT FROM AUTHOR]

Few studies were focused on yield estimation of perennial fruit tree crops by integrating remotely-sensed information into crop models. This study presented an attempt to assimilate a single leaf area index (LAI) near to maximum vegetative development stages derived from Landsat satellite data into a calibrated WOFOST model to predict yields for jujube fruit trees at the field scale. Field experiments were conducted in three growth seasons to calibrate input parameters for WOFOST model, with a validated phenology error of −2, −3, and −3 days for emergence, flowering, and maturity, as well as an R2 of 0.986 and RMSE of 0.624 t ha−1 for total aboveground biomass (TAGP), R2 of 0.95 and RMSE of 0.19 m2 m−2 for LAI, respectively. Normalized Difference Vegetation Index (NDVI) showed better performance for LAI estimation than a Soil-adjusted Vegetation Index (SAVI), with a better agreement (R2 = 0.79) and prediction accuracy (RMSE = 0.17 m2 m−2). The assimilation after forcing LAI improved the yield prediction accuracy compared with unassimilated simulation and remotely sensed NDVI regression method, showing a R2 of 0.62 and RMSE of 0.74 t ha−1 for 2016, and R2 of 0.59 and RMSE of 0.87 t ha−1 for 2017. This research would provide a strategy to employ remotely sensed state variables and a crop growth model to improve field-scale yield estimates for fruit tree crops. [ABSTRACT FROM AUTHOR]

Unmanned aerial vehicles (UAV) provide an unprecedented capacity to monitor the development and dynamics of tree growth and structure through time. It is generally thought that the pruning of tree crops encourages new growth, has a positive effect on fruiting, makes fruit-picking easier, and may increase yield, as it increases light interception and tree crown surface area. To establish the response of pruning in an orchard of lychee trees, an assessment of changes in tree structure, i.e., tree crown perimeter, width, height, area and Plant Projective Cover (PPC), was undertaken using multi-spectral UAV imagery collected before and after a pruning event. While tree crown perimeter, width and area could be derived directly from the delineated tree crowns, height was estimated from a produced canopy height model and PPC was most accurately predicted based on the NIR band. Pre- and post-pruning results showed significant differences in all measured tree structural parameters, including an average decrease in tree crown perimeter of 1.94 m, tree crown width of 0.57 m, tree crown height of 0.62 m, tree crown area of 3.5 m2, and PPC of 14.8%. In order to provide guidance on data collection protocols for orchard management, the impact of flying height variations was also examined, offering some insight into the influence of scale and the scalability of this UAV-based approach for larger orchards. The different flying heights (i.e., 30, 50 and 70 m) produced similar measurements of tree crown width and PPC, while tree crown perimeter, area and height measurements decreased with increasing flying height. Overall, these results illustrate that routine collection of multi-spectral UAV imagery can provide a means of assessing pruning effects on changes in tree structure in commercial orchards, and highlight the importance of collecting imagery with consistent flight configurations, as varying flying heights may cause changes to tree structural measurements. [ABSTRACT FROM AUTHOR]