Search

The accuracy and rapidity of total iron content (TFE) analysis can accelerate iron ore production. Although the conventional TFE detection methods are accurate, its detection speed presents difficulties in meeting production requirements. Therefore, this paper proposes a method of TFE detection based on reflectance spectroscopy (wavelength range: 340–2500 nm) and remote sensing. Firstly, spectral experiments were conducted on iron ore using the HR SVC-1024 spectrometer to obtain spectral data for each sample. Then, the spectra were smoothed and dimensionally reduced by using wavelet transform and principal component analysis. To improve the detection accuracy of TFE, a two hidden layer extreme learning machine with variable neuron nodes based on an improved sparrow search algorithm and batch normalization optimization (MSSA-BNVTELM) is proposed. According to the experimental results, MSSA-BNVTELM exhibited superior detection accuracy in comparison to other algorithms. In addition, this research established a remote sensing detection model using Sentinel-2 data and MSSA-BNVTEM to detect the distribution of TFE in the mining area. The distribution of TFE in the mine area was plotted based on the detection results. The results show that the remote sensing of the mine area can be useful for detection of the TFE distribution, providing assistance for the mining plan. [ABSTRACT FROM AUTHOR]

The spatial characteristics of discontinuity traces play an important role in evaluations of the quality of rock masses. Most researchers have extracted discontinuity traces through the gray attributes of two-dimensional (2D) photo images or the geometric attributes of three-dimensional (3D) point clouds, while few researchers have paid attention to other important attributes of the original 3D point clouds, that is, the color attributes. By analyzing the color changes in a 3D point cloud, discontinuity traces in the smooth areas of a rock surface can be extracted, which cannot be obtained from the geometric attributes of the 3D point cloud. At the same time, a necessary filtering step has been designed to identify redundant shadow traces caused by sunlight on the rocks' surface, and a multiscale spatial local binary pattern (MS-LBP) algorithm was proposed to eliminate the influence of shadows. Next, the geometric attributes of the 3D point cloud were fused to extract the potential discontinuity trace points on the rocks' surface. For cases in which the potential discontinuity trace points are too scattered, a local line normalization thinning algorithm was proposed to refine the potential discontinuity trace points. Finally, an algorithm for establishing a two-way connection between a local vector buffer algorithm and a connectivity judgment algorithm was used to connect the discontinuity trace points to obtain the discontinuity traces of the rock mass's surface. In addition, three datasets were used to compare the results extracted by existing methods. The results showed that the proposed method can extract the discontinuity traces of rock masses with higher accuracy, thereby providing data support for evaluations of the quality of rock masses and stability analyses. [ABSTRACT FROM AUTHOR]

Spaceborne interferometric synthetic aperture radar (InSAR) techniques are important for landslide detection and monitoring; however, several limitations and uncertainties, such as the unique north–south flying direction and side-look radar observing geometry, currently limit the ability of InSAR to credibly detect landslides, especially those related to high and steep slopes. Here, we conducted experimental and statistical analysis on the feasibility of time-series InSAR monitoring for steep slopes using ascending and descending SAR images. First, the theoretical (TGNSS), practical (PGNSS), and terrain (Hterrain) (T-P-H) indices for sensitivity evaluations of the slope displacement monitoring results from time-series InSAR were proposed for slope monitoring. Subsequently, two experimental and statistical studies were conducted for the cases with and without Global Navigation Satellite System (GNSS) monitoring data. Our experimental results of two high and steep open-pit mines showed that the defined theoretical and practical sensitivity indices can quantitatively evaluate the feasibility of ascending and descending InSAR observations in steep-slope deformation monitoring with GNSS data, and the terrain sensitivity index can qualitatively evaluate the feasibility of landslide monitoring results from ascending and descending Sentinel-1 satellite data without GNSS data. We further demonstrate the generalizability of these proposed indices using four landslide cases with both public GNSS and InSAR monitoring data and 119 landslide cases with only InSAR monitoring data. The statistical results indicated that greater indices correlated with higher reliability of the monitoring results, suggesting that these novel indices have wide suitability and applicability. This study can help to improve the practice of slope deformation monitoring using spaceborne InSAR, especially for high and steep slopes. [ABSTRACT FROM AUTHOR]

Geological disasters are responsible for the loss of human lives and for significant economic and financial damage every year. Considering that these disasters may occur anywhere—both in remote and/or in highly populated areas—and anytime, continuously monitoring areas known to be more prone to geohazards can help to determine preventive or alert actions to safeguard human life, property and businesses. Remote sensing technology—especially satellite-based—can be of help due to its high spatial and temporal coverage. Indeed, data acquired from the most recent satellite missions is considered suitable for a detailed reconstruction of past events but also to continuously monitor sensitive areas on the lookout for potential geohazards. This work aims to apply different techniques and methods for extensive exploitation and analysis of remote sensing data, with special emphasis given to landslide hazard, risk management and disaster prevention. Multi-temporal SAR (Synthetic Aperture Radar) interferometry, SAR tomography, high-resolution image matching and data modelling are used to map out landslides and other geohazards and to also monitor possible hazardous geological activity, addressing different study areas: (i) surface deformation of mountain slopes and glaciers; (ii) land surface displacement; and (iii) subsidence, landslides and ground fissure. Results from both the processing and analysis of a dataset of earth observation (EO) multi-source data support the conclusion that geohazards can be identified, studied and monitored in an effective way using new techniques applied to multi-source EO data. As future work, the aim is threefold: extend this study to sensitive areas located in different countries; monitor structures that have strategic, cultural and/or economical relevance; and resort to artificial intelligence (AI) techniques to be able to analyse the huge amount of data generated by satellite missions and extract useful information in due course. [ABSTRACT FROM AUTHOR]

Terrestrial laser scanning (TLS) techniques have been widely used in open-pit mine applications. It is a crucial task to measure the exploitative volume of open-pit mines, within a specific time interval. One major challenge is posed, however, when conducting accurate registrations for temporal TLS surveys in continuously changing areas, created by excavation activities. In this paper, we propose a coarse-to-fine registration method, based on terrain-invariant regions (TIR), for temporal TLS surveys. More specifically, an approximate four-point congruent set (4PCS) of temporal TLS surveys is first identified, based on affine invariant rules. Second, a set of correspondences among temporal TLS surveys were collected by matching multi-scale sparse features of the 3D neighbors, centered at the approximate 4PCS. Third, the correspondences were used to estimate a rigid motion between the overlapping TLS surveys for the coarse registration, according to which the initial TIR from temporal TLS surveys were identified. Finally, the rigid motion between temporal TLS was iteratively optimized, based on the point clouds, only from the TIR. Based on the fine-level registered TLS surveys, Digital Elevation Models (DEMs) can be generated to calculate the exploitative volume, through a DEM differential. We applied the proposed method to two open-pit mines in China, and also compared our method with five state-of-the-art methods for registering temporal TLS surveys. Experimental results indicated that the proposed method achieved a higher registration accuracy than the state-of-the-art methods. Based on the registered result, our method achieved a 98.03% overall accuracy for measuring the exploitative volume, compared to in-situ measurement. [ABSTRACT FROM AUTHOR]

The mining waste of open pit mines is usually piled-up in dump sites, making a man-made hill more than tens of meters high. Because of the loose structure of the dump sites, landslides or debris flow may occur after heavy rainfall, threatening local lives and properties. Therefore, dump stability analysis is crucial for ensuring local safety. In this paper, a collaborative stability analysis based on multiple remote sensing technologies was innovatively conducted at the Xudonggou dump of the Anqian iron mine. A small baseline subset (SBAS) analysis was used to derive the spatial and temporal distributions of displacements in the line-of sight (LOS) over the whole study area. The deformation in LOS is translated to the slope direction based on an assumption that displacements only occur parallel to the slope surface. Infrared Thermography (IRT) technology was used to detect weak aquifer layers located at the toe of possible landslide bodies. Then, numerical simulations based on the limit equilibrium method were conducted to calculate the factor of safety for three profiles located on the dump site. The results, emerging from multiple remote sensing technologies, were very consistent and, eventually, the landslide hazard zone of the Xudonggou dump site was outlined. [ABSTRACT FROM AUTHOR]