Search

Energy simulations are extensively employed by researchers and designers to assess strategies aimed at enhancing the thermal performance or energy efficiency of buildings. However, the methodologies for conducting these simulations and analyzing their outcomes vary according to regional standards and among research groups. This work aims to investigate the methods for evaluating the thermal performance of buildings through energy simulations, through a systematic literature review. Initially, the authors surveyed articles published between 2011 and 2022 on Scopus and Web of Science. From an initial pool of 1463 articles that met the research criteria, a refined list of 158 papers were read completely. The authors examined prevalent trends in the methods and identified future research directions. Most publications originated from authors in Northern Hemisphere, with only Brazil showing expressive numbers in the Southern Hemisphere. The results revealed the three most employed methods: Thermal Load (94 %), Degree-Hour (or Degree-Day) (9 %), and Design Days (5 %). EnergyPlus stands out as the widely preferred software (65 % of studies), and 62 % of them incorporate some form of validation or calibration. Articles often lack complete simulations parameters and/or clarity in their presentation. In response to the identified gaps, this study introduces a checklist of best practices for presenting the simulation steps. As such, this work serves as a valuable theoretical framework for future assessments of building thermal performance through computer simulation. • We reviewed 185 papers on methods to evaluate therm. Perform. Via energy simulations. • Thermal Load (94 %), Degree-Hour (9 %) and Design Days (5 %) are the most used methods. • EnergyPlus and ASHRAE are the most used software and standard, respectively. • Literature gaps include comparative studies and conversion strategies among methods. • Standardized protocols for model calibration and validation are still limited. [ABSTRACT FROM AUTHOR]

Brazil is a case of the achievement of a high share of wind energy integration to an interconnected power system in an emerging market. A series of successful energy supply programmes and a strong renewable-oriented finance framework implemented since 2002, have promoted alternative renewables – wind installed capacity increased over 22-fold from 927 MW in 2011 to 21 GW in 2022, reaching 11.77% of total procured power. From this, about 90% are concentrated in Brazil's least developed region, the Northeast, where wind investment should create jobs and propel socioeconomic development. Despite that, there is no studies specific assessing the regional and economy-wide effects of those programmes, gap that this paper aims to fill by applying the regional Computable General Equilibrium (CGE) model TERM-BR10. We assess that by modelling an alternative scenario for the period 2010-19 based on an official electricity matrix built in 2010, that projected 3.4 additional GW of wind power while not considering all the success of renewable policies, against the observed installed capacity expansion, where wind power was 3.7 times higher than what had been planned. Our results show that in the absence of renewable policies, Brazil would have faced economic losses such as GDP (−0.27%) and investment (−4.76%). The Northeast region would have been the most impacted in terms of GDP (−1.3%), real wage (−2.99%) and employment creation (−0.1%). We propose that such socioeconomic co-benefits are incorporated in energy planning, which could promote regional equality through renewable energy expansion. • Wind power capacity increased over 20-fold from 2011 to 2022. • 90% are in the poorest region where policies propel development and job creation. • Policy absence would entail a GDP loss of 0.27% nationally and of 1.3% in the region. • Negative impacts to labour market are mostly over skilled jobs. [ABSTRACT FROM AUTHOR]

The so-called energy transition has been associated with decreasing dependence on fossil fuel energy and low environmental impacts. Additionally, several communities worldwide still face energy poverty, with no or limited access to energy services. This paper evaluates the environmental and economic aspects related to replacing diesel-based power systems with photovoltaic and battery storage systems in a small indigenous community in northern Brazil. Nine environmental categories were analyzed for the life cycle perspective, from which it was established that the benefits of the photovoltaic system outperformed the diesel-based system in seven of the nine categories i.e., climate change (by a difference of 189.8 t CO 2 -eq over the system's lifetime, i.e., 300 MWh generated over 25 years), fossil depletion (by 66.7 t oil-eq), environmental toxicity (by 1.4 t 1,4-DCB-eq), particulate matter formation (by 1.5 t PM10-eq), photochemical oxidant formation (by 4.8 t NMVOC), terrestrial acidification (by 2.5 t SO 2 -eq), and eutrophication (by 1.7 t nutrients-eq). On the other hand, metal depletion showed similar values for both cases, while the diesel-based system was associated with lower human toxicity (by 14.8 t 1,4-DCB-eq) given the high usage of toxic metals when manufacturing the battery systems. Regarding the economic aspects, from stochastic analysis, the results for replacing diesel-based systems result in average savings of around 9 thousand USD over 25 years. Hopefully, these positive results might stimulate policy efforts that lead to mitigating energy poverty in Brazilian indigenous communities. • LCA and economic analysis of a PV and battery system compared to a diesel-based one. • The PV and battery system is superior in seven out of nine environmental categories. • The PV and battery system leads to savings of around 9 thousand USD over 25 years. • Social benefits are highlighted with a loss of power supply probability of only 0.2%. • The results of the paper might stimulate policy efforts to mitigate energy poverty. [ABSTRACT FROM AUTHOR]

Sugarcane mills currently use sugarcane bagasse to cogenerate heat and electricity, supplying the process with mechanical, thermal and electrical energy. Some of these plants are able to produce surplus electricity to export to the national grid. With the improvement in collection techniques, sugarcane straw has also become available and has been used in some mills as fuel for steam boilers, mixed with sugarcane bagasse. However, due to different traits compared to bagasse, the use of sugarcane straw may pose additional problems of incrustation and corrosion on heat exchange surfaces. Several alternatives and technologies have been studied and tried out in order to increase the production of surplus electricity. Among others, biomass integrated gasifier–gas turbine combined cycle (BIGCC) is a promising technology. However, several attempts have resulted in failure, whether on a pilot or industrial scale. Biomass gasification integrated with internal combustion engines can become an opportunity for generation of small power capacity (<15 MW) and integrated to sugarcane mills. This paper analyzes the difficulties and barriers to increasing electricity generation in the sugarcane industry through studies, projects and experimental and industrial-scale installations that have already been carried out. • Bagasse and cane straw show great potential for electricity generation. • Sugarcane industry in Brazil accounts for 6.4% of the electricity generated. • Biomass integrated gasification and combined cycle can increase electricity generation. • Technological and economic challenges are major barriers to the development of BIGCC. • No BIGCC project already implemented is currently in commercial operation. [ABSTRACT FROM AUTHOR]

In 2007 was settled the first minimum energy performance standards for air conditioners in Brazil. After more than 14 years since the first regulations and looking upon future perspectives, this paper presents a review of regulatory developments in the country and an assessment based on scenario simulation to verify potential impacts of new minimum energy performance standards for air conditioners. The methodology employed is a bottom-up approach designed to estimate the energy consumption of air conditioners. A spreadsheet-based computational tool was developed to perform sensitivity analysis of key parameters such as ownership rate, average temperature and cooling degree days. The results show a significant energy savings potential that could be captured through a minimum energy performance standards revision. For the scenarios simulated these savings potential would reach up to 417 TWh, with respective greenhouse gases emissions reduction that would be 249 million tons, over the period from 2023 to 2040. An economic analysis of minimum energy performance standards impact is also provided and indicate that even in conditions that involve higher costs and discount rates, new more restrictive minimum energy performance standards allow capturing significant benefits for the society as a whole and for consumers individually. Reviewing the minimum energy performance standards is a critical and urgent issue for Brazil and the methodology presented in this paper can be useful in the process of decision-making related to new regulatory developments. • More restrictive MEPS for air conditioners is urgently needed in Brazil. • The synergy between the CGIEE, Procel and PBE/INMETRO should be improved. • The methodology presented in the paper can support the process of MEPS revisions. • Energy, economic and environmental benefits of more stringent MEPS can be very significant. [ABSTRACT FROM AUTHOR]

Before the COVID pandemic, oil and gas companies invested only a small fraction of their capital on sustainable energy technologies. With the substantial improvement in the performance of batteries and their rapid cost reduction, the oil and gas industry could potentially lose a large share of their market in the transport sector. A similar shift in energy sources is happening with the surge in renewable energy sources to supply electricity, heating and cooling. In an ever more sustainable future, the need for an oil and gas industry could reduce significantly. This paper reviews the possible paths that an oil and gas company could follow to become a sustainable development corporation and continue to be relevant in the future. This paper aims to describe alternative sustainable pathways such as the extraction of natural hydrogen, a hydrogen economy, offshore wind power, deep sea mining, biorefineries, seawater air-conditioning, geothermal and geoengineering. This paper also proposes the use of electrolysis ships for the flexible production of green hydrogen and showed that its investment cost can be three times smaller than in fixed electrolysis plants. The oil and gas industry has substantial intellectual, financial capital and geopolitical influence that would not be lost during a shift to a more sustainable world. Indeed, these assets should be used to facilitate the transition to a more sustainable future. • Hydrogen is a good alternative for sustainable development in O&G companies. • Natural hydrogen is a good alternative to the upstream O&G companies. • Benefits of electrolysis ships to produce green hydrogen. • Case study to produce green hydrogen in Brazil. [ABSTRACT FROM AUTHOR]

The production of biodiesel through enzymatic routes has attracted significant attention, mainly because this can be regarded as a "green route" for the manufacture of fuels. In this way, an advanced bibliometric analysis comprising the global scientific production of biodiesel through immobilized enzymes was conducted. Thus, 923 papers were retrieved, analyzed, and classified according to the reported substrates, enzymes, supports, immobilization procedures, and reactors. Researchers from 748 institutions of 64 distinct countries authored the analyzed articles, showing the widespread interest in these technologies, although 10 countries concentrate more than 80% of the total number of documents published in this area, including China (23%), Brazil (17%), and India (11%). Particularly, most papers reported the use of vegetable oils (67%) as raw materials. In the last decade, approximately 80% of the published research focused on the use of supports to manufacture immobilized and insoluble biocatalysts. Enzymes have been obtained mostly from fungal sources (64%), especially lipases produced by Thermomyces lanuginosus (14.4%). Among the available commercial immobilized biocatalysts, Novozym 435 is certainly the one cited most frequently (55.9%) followed by Lipozyme RM IM (13.7%) and Lipozyme TL IM (16.7%). Additionally, the majority of the manuscripts reported the use of stirred tank reactors (83.0%) to perform the enzymatic reactions. Based on the surveyed literature, research trends indicate that new technologies are being developed to turn the enzymatic production of biodiesel more sustainable and economically viable, based mainly on the use of more active biocatalysts, more sustainable enzyme supports, and low-cost residues as raw materials. • Advanced bibliometric review about the production of biodiesel by immobilized enzyme was performed. • Chinese and Brazilian scientific communities are the most active in this field. • Novozymes 435 is the commercial biocatalyst used most often in this field. • Emerging technologies were identified for the synthesis of enzyme supports. • Sustainable supports and low-cost feedstocks are trends in the biodiesel production field. [ABSTRACT FROM AUTHOR]

Brazil is an emerging market for offshore wind energy, with its first projects having already applied for environmental permits. However, few studies have actually evaluated Brazil's offshore potential, and those analyses have focused on its gross resource potential. This paper thus aims to assess Brazil's offshore wind potential through a novel approach that allows for the evaluation and mapping of the potential in different levels (Gross, Technical and Environmental and Social) and highlights the most economically attractive areas for offshore wind deployment, following a Spatial Multi-Criteria Decision Analysis. Results for Brazil show 1688 GW of Gross Potential, 1064 GW of Technical Potential and 330 GW of Environmental and Social Potential. The least economically attractive areas are mainly in the Southeast region, while the most attractive ones are concentrated in the Northeast region. The top ten areas for offshore development are also highlighted, totaling 126 GW of capacity. In short, this paper addresses the knowledge gap towards a comprehensive potential assessment for Brazil and concludes that the country has a significant offshore wind potential that can be sustainably deployed if proper siting criteria are applied. The approach proposed here is replicable and capable of informing the planning of sustainable offshore wind development in other regions or countries. • Brazil's Gross, Technical, and Environmental-Social Offshore Wind Potentials. • GIS approach considers offshore wind farms siting constraints to map suitable areas. • GIS-MCDA to rank suitable areas according to their economic attractiveness. • Environmentally and socially suitable areas sum 330 GW of potential capacity. • The top 10 most attractive areas in Brazil sum 126 GW of potential capacity. [ABSTRACT FROM AUTHOR]

Hybrid polygeneration systems offer a great opportunity to meet growing energy demands with cost efficiency and environmental benefits. The identification of the optimal solution (configuration and operational strategy) is strongly affected by the relationship between the system and its surroundings. Previous studies have analyzed the influence of boundary conditions on the synthesis of polygeneration systems for buildings. However, local regulations are often disregarded or oversimplified in those studies. Therefore, this paper aims to evaluate the influence of legal conditions on the integration of renewable energy technologies in polygeneration systems for buildings. A comprehensive synthesis model is developed, including different types of legal conditions, such as power exchange modalities, subsidies/surcharges on energy prices and investment costs, and total ban on fossil fuels. Then, the model is applied to the case study of a Brazilian hospital. The current Brazilian net metering scheme is implemented. Results show that natural gas cogeneration is an attractive solution to cover the hospital's energy demands with or without the possibility of selling/exporting electricity. Also, the Brazilian net metering scheme, by itself, is not enough to ensure renewable energy deployment. An in-depth discussion about the conditions that would promote renewable energy integration is reported and recommendations are made on how current policies can be improved, including the need to explicitly address renewable technologies, the application of minimum renewable fractions, and the role of renewable heat/cooling. While the case study considers the specific circumstances in Brazil, it provides insights that can be extended to other countries or applications. • Synthesis model of hybrid renewable polygeneration systems for buildings. • Influence of legal constraints on the integration of renewable energy technologies. • Power exchange modalities, subsidies/surcharges, and fossil fuel ban are considered. • Technical, economic, and environmental analysis of a Brazilian hospital case study. • The Brazilian net metering scheme did not promote renewable energy technologies. [ABSTRACT FROM AUTHOR]

Brazil's Northeast is the country's least developed region and accounts for half of its potential for wind power generation. Recent wind energy projects have directed substantial investment flows to this region and are expected to propel regional socioeconomic development. This paper estimates interregional socioeconomic impacts of onshore wind power deployment in Brazil's Northeast region by applying a new Interregional Input-Output model with endogenized households. By assessing the direct, indirect and induced effects on economic sectors and households, cross-sectoral insights for regional development policies are identified. The set of projects considered consists of 2911 MW procured through auctions, which will become operational by 2023. Results show significant indirect and induced multiplier effects. Results indicate that 10 jobs/MW are created directly, while the total effect is 31.9 jobs/MW, meaning indirect and induced effects can be more than three times higher than direct impacts. More than 50% of the benefits occur in just a few key sectors. In the Northeast, the highest potential benefit on value added is revealed in the sectors: wholesale and retail trade; R&D and other business activities; financial intermediation; and real estate activities. These sectors reflect the potential for induced economic co-benefits mainly. However, the Rest of Brazil captures a significant part of total benefits, especially high-income jobs and high value-added activities. Therefore, we recommend that regional development policies focus on key sectors identified here and human development to provide O&M personnel and long-lasting benefits. Lastly, we discuss justice and equality issues related to our results. • Total economic output is almost three times the investments in wind power in Brazil. • >50% results come from six economic sectors; induced effects are the largest part. • Wealthier regions than the Northeast region capture significant impacts. • Prioritizing and increasing local industry may reduce regional inequality. • Multi-objective policy can benefit energy, the economy and tackle social challenges. [ABSTRACT FROM AUTHOR]

The objective of the paper is to perform a review of the environmental impacts of the installation, operation and maintenance (O&M), and decommissioning of offshore wind technologies. At first, a comprehensive review is presented on offshore wind technologies and techniques related to the installation, O&M, and decommissioning stages. Then a thorough review of environmental issues using the main available studies in the literature associated with the activities of each stage is performed. The review employs an activity–stressor–receptor–impact framework in which the possible positive or negative impacts of an environmental stressor on a specific receptor are identified for each activity, such as pile driving, cabling, blade rotation, etc. Additionally, a case study of Brazil addresses regions with biological resources, marine protected areas, and offshore wind hotspots considering atmospheric reanalysis along the coastline. Moreover, the presence of the offshore oil and gas (O&G) industry is discussed as an important influence on the development of offshore wind projects in Brazil. [Display omitted] • Environmental impacts analyzing the activity–stressor–receptor–impact relationship. • Extremely high biological importance areas within Brazilian hotspots shallow water. • O&G activities along Brazilian hotspots of the Northeast and the Southeast coastline. • Recommendations for the offshore wind environmental licensing process in Brazil. [ABSTRACT FROM AUTHOR]