Search

Plant operators and policy makers frequently use energy benchmarking to assess the potential for reducing energy consumption from industrial plants. As benchmarking studies require considerable resources and the cooperation of plant operators it is tempting to try to merge or compare data from different studies. This paper reviews published benchmarks and energy-saving estimates from the paper and pulp industries to explore how comparable data from independent studies are. A literature review was conducted which identified that benchmarks were either produced through a top-down process using annual production and fuel consumption data or through a bottom-up process from process-level data. It was concluded that top-down benchmarks are useful in measuring national trends but are of little value to individual plants. For common process such as Kraft pulp production it is possible to compare values from different studies but only if sufficient information is given in the original studies to confirm that their scope is identical. However, it is unlikely that improvement rates in energy use can be inferred from the difference between studies that use different sources, as the degree of disagreement between contemporary studies is of the same order as the identified potential energy savings. Benchmarking studies were found to provide good summaries of potential technological improvements although there is some inconsistency in estimations of potential impacts. [ABSTRACT FROM AUTHOR]

Based on recent developments, hydrogen-based combustion systems have received wide attention, mainly due to increasing awareness of enduring environmental pollutants and restricted access to fossil fuel usage. In the relevant literature, there are evidences of the possibilities on the partial or total replacement of hydrocarbon fuels with hydrogen in power plants and vehicle engines. However, some challenging issues particularly on hydrogen storage are remained to be resolved. This paper reviews and comments on addressing the effectiveness of hydrogen-enrichment on the engines and burners׳ performance includes the chemical kinetic analysis, the flame propagation structures and the effects of inhibitors on global burning velocity of hydrogen–hydrocarbon mixtures in different combustion bombs, chambers and vessels. It is recommended that future researches should aim towards the different application of hydrogen–hydrocarbon i.e. transportation and clean energy carrier. [ABSTRACT FROM AUTHOR]

This paper explores opportunities for effective policy intervention for residential energy savings in southern China, by analyzing achievable potential of residential energy savings in the city of Xiamen as a case study. In contrast to static technical and economic potential analyses, the achievable potential analysis is based on dynamic energy consumption projections, which consider two real-world factors: (1) gradual ramping-up adoption process of advanced technical measures; and (2) consumers’ adoption of these measures. A bottom-up type Residential Energy Consumption (REC) projection model specifically tailored for southern China was developed in this paper, based on the general logic and calculation principles utilized in the U.S. EIA’s “National Energy Modeling System (NEMS),” and the adoption theory of advanced technical measures proposed by Kastovich. This REC projection model was then used as a policy analysis tool to quantitatively evaluate the impact of various policies on residential energy savings in the case study city of Xiamen. The analysis of the Xiamen case shows that although there is a significant technical potential for residential energy savings in the city (about 20.9–24.9%), the maximum achievable potential (MAP) in 2020 is only about 8.3–8.4% of that year’s business-as-usual baseline consumption. Moreover, with existing policies only about one-fourth to half of the calculated MAP is likely to be achieved by 2020. These findings indicate that in order to realize a larger share of achievable potential for residential energy savings in China, additional and more effective polices are needed. [ABSTRACT FROM AUTHOR]

The miniaturization, portability, and reduction in power consumption of wearable devices have greatly facilitated significant advancements in the field of wearable human energy harvesting systems. Human metabolism results in waste heat production and dissipation to the surroundings via skin radiation, convection, and evaporation. Wearable flexible thermo-electric and moist-electric devices uses skin waste heat harvesting to convert thermal energy into electricity without user involvement. The principle and structure of the device is simple and pollution free with great application potential in generating power supply. Skin waste heat can be dissipated in the forms of both sensible and latent heat. Wearable thermo-electric generators (WTEGs) collects sensible heat, and wearable moist-electric generators (WMEGs) collects latent heat. This paper reviews the mechanism behind the generator of WTEG and WMEG, as well as state-of-the-art research progress made in material properties and structural design of thermoelectric devices. The performance optimization and design of wearable, flexible thermoelectric devices for skin waste heat harvesting at the material and device levels are studied, followed by a breakdown on the fibers and fabrics used in the foundation for future development of WTEG and WMEG's. The research findings provides valuable insight on the future development of WTEG and WMEG's, providing integration into wearable applications for health and physiological monitoring and disease diagnosis. This paper reviews the mechanism behind the generator of WTEG and WMEG, as well as state-of-the-art research progress made in material properties and structural design of thermoelectric devices. The performance optimization and design of wearable, flexible thermoelectric devices for skin waste heat harvesting at the material and device levels are studied, followed by a breakdown on the fibers and fabrics used in the foundation for future development of WTEG and WMEG's. The research findings provides valuable insight on the future development of WTEG and WMEG's, providing integration into wearable applications for health and physiological monitoring and disease diagnosis. [Display omitted] • Explored the theory of thermoelectric energy conversion from skin waste heat. • Overviewed advancements in material properties and structural design of thermoelectric devices. • Studied on improved designs for wearable thermoelectric devices using fiber and fabric materials. • Future directions for wearable flexible thermoelectric devices. [ABSTRACT FROM AUTHOR]

To facilitate a successful integration of distributed energy resources into the electricity generation mix, new forms of energy markets must be considered. Concepts such as Peer-to-peer energy trading (P2P), transactive energy (TE) and community/collective self-consumption (CSC) are frequently mentioned as solutions to this challenge. Despite increasing interest from industry, policy, and academia, the field lacks a shared understanding of this class of models. This need is addressed by presenting sets of shared and distinct characteristics which define P2P, TE and CSC. Our analysis is based on a series of expert group interviews with regulators, industry, and academics across 13 countries, and a systematic and targeted literature review of 133 papers. Findings show that P2P/TE/CSC models can be described as sub-markets that operate within or alongside traditional energy markets and enable trading or sharing of energy using an automated approach. They focus on promoting and supporting local energy generation and consumption using price negotiation mechanisms that reflect the aims of the market. The paper also presents sets of characteristics which differentiate P2P, TE, and CSC from one another and sets out guiding definitions to be used as a reference point. The main differences between these models stem from the goal they are trying to achieve and the contexts they are deployed in. Findings from this analysis can support development of a shared understanding of this class of models across multiple disciplinary perspectives and applications. • Decentralised energy trading models lack a unified definition. • Expert interviews and literature review identify defining characteristics. • Decentralised models can operate as sub-markets alongside traditional markets. • Distinctions between models stem from their goal and the contexts they are deployed in. [ABSTRACT FROM AUTHOR]

Australia has significant offshore wind resources that can support ever-increasing power demand and hence provide a long-term contribution to the net-zero target by 2050. Although some offshore wind farm projects are proposed in Australia, the industry is not mature enough to justify the benefits and display economic opportunities. More specifically, the techno-economic analysis of offshore wind energy has not been systematically mapped in Australia. Therefore, the investigation of the spatial variation of technical feasibility and economic potential of offshore wind is vital to identify the potential regions and to develop strategies for future offshore wind farm developments in Australia. This paper presents detailed mappings of the techno-economic potential of offshore wind energy in Victoria-Tasmania's exclusive economic zone. Offshore wind energy resources are assessed in the paper in terms of energy availability and variability and the feasibility of various offshore wind technologies is investigated, including turbines, foundation types and transmission topologies. In addition, the high-fidelity life-cycle cost models and two innovative evaluation matrices are developed to assess the economic potential of offshore energy farms in South-eastern Australia. The impact of local power system regulation costs and future carbon prices on the viability of offshore wind is also investigated in this paper. It is concluded that the detailed mapping approach and analysis in the paper can provide a systematic tool for industry partners, investors and policymakers at the pre-planning stage of developing offshore renewable energy systems. • The technical feasibility of offshore wind is mapped under various constraints. • The novel LACE and high-fidelity LCC assessment models are developed. • The techno-economic potential is systemically mapped in South-eastern Australia. • The impacts of electricity market regulation and future carbon prices are studied. [ABSTRACT FROM AUTHOR]

China has been introducing reforms in the electricity market. Since 2016, electricity retailers are allowed to operate in the market once monopolized by traditional power companies. This regulatory environment demands new types of purchase contracts to remunerate the energy agents and deliver better prices for consumers fairly and sustainably. This paper proposes two new electricity purchase contracts with risk sharing mechanism and studies on wind power supplier's optimal capacity investment problem under supply and demand uncertainty. Firstly, a basic model for fixed demand contract is developed, and the optimal capacity is obtained. Secondly, the fixed commitment order contract and the forecast order contract with risk sharing mechanism are proposed to manage the fluctuation of wind power supply randomness. With backward induction, the optimal investment capacity of wind power supplier is solved, and then the fixed order quantity or forecast demand quantity of the electricity retailer can be obtained. Our results show that the fixed order quantity may have a positive influence on the wind power supplier's capacity investment decision. While, the forecast order quantity may have a negative influence on the wind power supplier's capacity investment decision. In addition, wind density has a strong influence on wind power capacity investment, and it has a positive impact on wind power supplier's profit, but it does not always have a positive impact on electricity retailer's profit. At last, based on numerical analysis, we examine how the wind density distribution coefficient change affect members' profit in the electricity supply chain. We also find that even with wind curtailment punishment, the forecast order contract can make a Pareto improvement on the whole electricity supply chain. [Display omitted] • Risk sharing mechanism is introduced to the fixed commitment order contract and the forecast order contract in the electricity supply chain. • Increasing the forecast order quantity may reduce the capacity investment. • The forecast order contract can improve the performance of the whole electricity supply chain. [ABSTRACT FROM AUTHOR]

Despite a substantial potential of renewable energy sources, the current energy supply system in Iran relies almost entirely on fossil fuel resources. It has imposed significant financial burden on the country and has led to considerable GHG emissions. Moreover, the country is confronting several challenges for harnessing alternative clean energy sources and promoting rational energy policies over the recent decades. To probe the root cause of these problems, this paper first provides an overview on the previous energy planning attempts in Iran. It shows that adequate commitment to a long-term energy planning could have meaningfully prevented these serious challenges. However, the previous studies have had some limitations in terms of employing appropriate planning tools, comprehensive evaluations, and scenarios definition and ranking. This paper thus proposes a power planning framework to assess the sustainability of future electricity scenarios for the period 2015–2050. MESSAGE, a systems engineering optimization model, is employed to evaluate the potential impacts of transitioning to a low-carbon electricity supply system. Using a combined AHP-TOPSIS method, the scenarios are then ranked based on 18 different techno-economic, environmental, and social dimensions of sustainability. The results indicate that scenario Cl_32, in which the share of non-hydro clean energy for electricity generation reaches 32%, is ranked best. • Iran's energy planning studies are reviewed. • A suitable link between energy planning and policy making is necessary for Iran. • A framework for sustainable development of the power sector is proposed. • MCDM is used to assess the sustainability of different scenarios. • The share of non-hydro clean energy technologies should increase up to 32% by 2050. [ABSTRACT FROM AUTHOR]

As subsidies continue to fall, the technology and cost performance of distributed photovoltaic (PV) determines the progress of its grid parity. Based on the discussion of technology and cost, this paper analyzed the economic performance of China's distributed PV industry by utilizing the two indicators of levelized cost of energy (LCOE) and internal rate of return (IRR). The results show that: firstly, the current external environment is generally conducive to the development of distributed PV, but there are still some constraints. Secondly, with the decrease of unit investment cost, distributed PV can achieve the goal of parity before 2025. Thirdly, distributed PV projects in the three types of solar energy resources all have high IRR, and the economic performance is better for the projects with high proportion of spontaneous self-use. At the end of the paper, policy recommendations are offered as references for the government. • We comprehensively analyzed the technology and cost performance of China's distributed PV. • We focused on the trend and decline path of China's distributed PV costs. • The LCOE of distributed PV in China is expected to achieve full parity in 2025. • Except 100% grid-connected mode, the IRR of distributed PV power plants in three areas is higher than 8% which has shown good economic benefits. [ABSTRACT FROM AUTHOR]

Abstract Energy systems are quickly evolving through the development of new technologies and the emergence of new operational and market design paradigms. In particular, the global push for sustainability is driving the transition towards a pronounced redesign. In fact, renewable energy integration is occurring at a massive scale, and several other exciting developments are finding their place in modern energy systems, such as distributed energy resources, demand response, energy storage technologies, and local energy markets. In this dynamic context, the process of energy policy design and implementation has found new challenges, and in supporting this key process, expansion planning models and tools can play an essential role. For example, these models can be employed to estimate the impact of a multitude of policy instruments. Thus, there is a wide interest in these tools and a variety of such models, as evidenced by a rich literature and a fast-paced evolution of this research area. Motivated by this, this work presents a comprehensive and up-to-date review on expansion planning models and tools with emphasis on their application to energy policy analysis. In particular, this paper reviews the most significant policy instruments, with an emphasis in renewable energy integration, the optimization models that have been developed for expansion planning, and existing decision-support tools for energy policy analysis. Finally, this paper also discusses the trends in the literature and the most pressing current challenges in the development and use of expansion planning models for energy policy analysis. Highlights • Provides a comprehensive and up-to-date overview on expansion planning models. • Reviews the most significant policy instruments with an emphasis in renewable energy integration. • Describes the salient features of using expansion models on energy policy analysis. • Discusses the future trends and challenges of smart grid technologies on expansion models. [ABSTRACT FROM AUTHOR]

Cameroon has an abundant reserve of energy resources, such as crude oil, natural gas, hydropower, biomass, solar, wind and geothermal energies. However, these resources are still weakly valorised. The country relies mainly on hydropower energy for electricity generation (73%) with persistent power outages throughout the country especially in the dry seasons when water levels are low. Electricity access is about 65–88% in urban areas and around 14% for rural populations. Cameroon has experienced a strong economic growth (growth rate of 5.9% in 2015), accompanied by a rapid increase in electricity demand (1455 MW in 2014). Electricity needs are expected to continue rising over the next decade to reach 5000 MW by 2020 and 6000 MW by 2030. This paper seeks to address energy issues (reliability, accessibility and security) in Cameroon and brings to light the potential and meaningful contributions of renewables in solving energy concern. In order to achieve this objective, an overview, of the energy sector (energy source, access, demand, supply and distribution) is given followed by a review of renewable energy potential, policy, benefits and barriers. In addition, this paper introduces the energy roadmap to achieve a universal access to electricity, which will pave the way for the country emergence by 2035. It is found that energy sector of Cameroon holds promising possibilities of development and diversification given the country's energy potential. With adequate policy, standards, regulations, awareness, capacity building and off-grid renewable energy investments measures, it is possible for Cameroon to meet the future energy targets and ensure meaningful development throughout the country. [ABSTRACT FROM AUTHOR]

Jurisdictions around the world are responding the to potential of smart grids in different ways. This paper employs a multi-level perspective approach to socio-technological transitions to examine why the Canadian province of Ontario has seen a relatively smooth transition of smart meter technologies from the niche to regime levels as compared with other Canadian provinces, and other jurisdictions in the United States, European Union, and Australia. The paper also examines the reasons for Ontario's advanced legislative and policy framework around Smart Grid development, relative to those of other provinces. The complex institutional landscape around electricity that has emerged in Ontario since the break-up of the province's monopoly utility Ontario Hydro in the late 1990s emerges as a significant factor in both outcomes. The role of the province's municipally-owned LDCs spell out "local distribution companies (LDCs) as the primary agents for smart meter deployment, as opposed to a dominant vertically integrated utility, appears to have had an important mediating effect on public opposition to smart meters. With respect to Smart Grid policy, the diversity of high capacity institutional actors that now define the province's electricity policy landscape has facilitated the emergence of several interagency policy development niches. In a manner consistent with the concept of technological niches in the socio-technical transitions literature, the interagency status of these policy niches has shielded them from the regime level selective pressures that would likely have existed in a more unified institutional structure, and empowered new policy ideas to move from the niche to regime levels. These outcomes have significant implications for the understanding of socio-technological transitions, particularly around the role of institutional complexity in the emergence of niches for technology and policy development purposes and in niche to regime level transitions. [ABSTRACT FROM AUTHOR]

This paper presents the editorial for the Renewable and Sustainable Energy Reviews joint special issue devoted to the research work discussed and presented at the 11th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES), held from the 4th September to the 9th September 2016 in Lisbon, Portugal and the 2nd South East European (SEE) SDEWES Conference held from June 15th to June 18th, 2016 in Piran, Slovenia. This special issue is in line with the journal's aim of publishing research from across the ever-broadening field of renewable and sustainable energy with a strong review element. Previous SDEWES conference special issues have gathered a significant knowledge base in the field of sustainable development that reflects the continuous research efforts of the SDEWES research community. Therefore, this editorial provides not only an overview of the papers published in this particular special issue, but also a wider overview of the current trends in the domain of sustainable and renewable energy. This year's special issue focuses particularly on the benefits of the bio-based economy, energy security issues, fossil fuel thermal plant alternatives and environmental constraints, district heating and cooling together with cross sector energy efficiency and energy conservation issues. Sustainable transport systems, the issue of fuel poverty in urban neighbourhoods and renewable energy to support development of peripheral rural areas, optimising passive building design for hot climates and solar-powered heating and cooling are further topics featured in this special issue. In the process of selecting papers for this special issue, the guest editors invited in total 23 extended manuscripts for consideration for publication. After a rigorous review process by expert reviewers overseen by the guest editors a total of 16 articles were accepted for publication. [ABSTRACT FROM AUTHOR]

Islanding operation in a distribution network connected to Distributed Generations (DGs) has the advantage of being able to continuously supply power to the loads even when disconnected from the grid. However, there are technical issues that need to be solved in order to guarantee a successful islanding operation. The main challenge in the successful islanding operation is to ensure the stability of frequency and voltage of the distribution system. Commonly load shedding schemes are used as a mechanism to stabilize the magnitude of the frequency and the voltage by shedding some of the loads to ensure an adequate balance between generation and loads. This paper reviews recent load shedding schemes focusing on distribution system application. Their respective merits and demerits are presented. Moreover, this paper also highlights the application of Voltage Stability (VS) index for load shedding schemes. A brief overview of the DG with their respective advantages also presented at the beginning of this paper. [ABSTRACT FROM AUTHOR]

In the United Arab Emirates (UAE), buildings consume almost 90% of the total electricity used in the country. This paper provides a comprehensive overview of recent trends in energy consumption in the building sector as well as current efforts in promoting energy efficiency within UAE. Moreover, the paper explores available opportunities to improve energy efficiency of the UAE building sector. In particular, the impacts of three levels of energy retrofits are quantified based on results from existing literature and an optimization-based bottom-up analysis for residential, commercial, and governmental buildings. The analysis indicates that any level of energy retrofit for the existing building stock can be effective in reducing energy consumption and peak power demand as well as in lowering carbon emissions for UAE. It is estimated that a basic energy retrofit program applied to existing UAE building stock could achieve savings of 7550 GWh/year in electricity consumption, 1400 MW in peak electricity demand and reduce carbon emissions by 4.5 million tons/year per year. The program would have an average payback period of less than six months for the UAE government and would generate almost 9000 job-years. [ABSTRACT FROM AUTHOR]

Brazil is a case of the achievement of a high share of wind energy integration to an interconnected power system in an emerging market. A series of successful energy supply programmes and a strong renewable-oriented finance framework implemented since 2002, have promoted alternative renewables – wind installed capacity increased over 22-fold from 927 MW in 2011 to 21 GW in 2022, reaching 11.77% of total procured power. From this, about 90% are concentrated in Brazil's least developed region, the Northeast, where wind investment should create jobs and propel socioeconomic development. Despite that, there is no studies specific assessing the regional and economy-wide effects of those programmes, gap that this paper aims to fill by applying the regional Computable General Equilibrium (CGE) model TERM-BR10. We assess that by modelling an alternative scenario for the period 2010-19 based on an official electricity matrix built in 2010, that projected 3.4 additional GW of wind power while not considering all the success of renewable policies, against the observed installed capacity expansion, where wind power was 3.7 times higher than what had been planned. Our results show that in the absence of renewable policies, Brazil would have faced economic losses such as GDP (−0.27%) and investment (−4.76%). The Northeast region would have been the most impacted in terms of GDP (−1.3%), real wage (−2.99%) and employment creation (−0.1%). We propose that such socioeconomic co-benefits are incorporated in energy planning, which could promote regional equality through renewable energy expansion. • Wind power capacity increased over 20-fold from 2011 to 2022. • 90% are in the poorest region where policies propel development and job creation. • Policy absence would entail a GDP loss of 0.27% nationally and of 1.3% in the region. • Negative impacts to labour market are mostly over skilled jobs. [ABSTRACT FROM AUTHOR]

Canada's cellulosic ethanol biorefinery concept is supported by federal and provincial government legislative ethanol mandates as well as enabling science and innovation policies for technology development to support the economic and sustainable production of cellulosic ethanol and co-products from Canada's abundant supply of lignocellulosic agricultural and forestry biomass. In particular, the development of pretreatment, hydrolysis, and fermentation technologies is regarded as a critical integrating step for the commercialization of cellulosic ethanol biorefinery business concepts. These critical steps are necessitated by the chemical structure of lignocellulosic biomass comprising carbohydrate polymers and lignin which constrains the ability of enzymes to convert these polymers into fermentable sugars without expensive and highly capital intensive pretreatment processes. This paper reviews science and innovation efforts by Canadian researchers in finding solutions to these constraints, in particular the development of hydrolysis and fermentation technologies. This paper also highlights the role of multi-institutional science and innovation collaborative approaches for advancing Canada's cellulosic ethanol biorefinery concept further downstream. While highlighting Canada's scientific progress, this review also outlines technology commercialization lags between basic research and full scale commercialization of a Canadian cellulosic ethanol biorefinery concept. Although this paper focuses on the near-term goal of cellulosic ethanol production, it nevertheless recognizes that ethanol is only the first step in the longer-term goal aimed at a full integrated bioconversion of lignocellulosic biomass into biofuels and a wide range of value-added biochemicals and biomaterials, consistent with the cellulosic biorefinery concept. [ABSTRACT FROM AUTHOR]

Energy model, a systematic data-intensive multi-objective framework replicating the energy sector of the country or globe, constitutes of energy resource supply, energy consumption sector-by-sector, energy transformation technologies, greenhouse gas emission and energy pricing. Considering the atypical weather pattern yearly and geographical diversity, the challenges and benefits of designing an energy model have been summarized. The paper has documented the tremendous jeopardy of drastic climate change, energy crisis on the global economy, requirement for transition to low carbon economy and rural electrification which have been impetus for the evolution of legitimate energy model. Special emphasis has been provided on the types of energy models that have been developed and practiced throughout the world followed by a comparative analysis of a few. The requirement to configure a unique energy model in India followed by certain recommendations has been proposed in this paper. [ABSTRACT FROM AUTHOR]

The centralised power grid bears a heavy burden in a time when consumers expect an uninterrupted reliable power supply, a reduction in carbon emissions, increased efficiency within the national grid and power supplied to remote communities. As expectations increase, it becomes the task of power systems research and design to develop new structures to meet these demands. This has led to alternatives being sought for centralised power generation, which is prone to outages (due to long distance transmission), is a substantial contributor to global carbon emissions, has large transmission losses and is often not a practical solution when supplying remote communities. Distributed generation (DG) looks to remedy these inadequacies by producing power close to its point of consumption, often utilising carbon neutral, renewable energy (RE) sources (sun, wind). To maximise the efficient use of DG, control structures are used to balance the intermittent RE power production with consumer power consumption. One such structure is used to implement control of small scale DG, at a single house/small building level: the nanogrid. This paper explores the current nanogrid research, it collates the existing definitions and uses the knowledge to give a concise definition of a nanogrid. It then discusses the control topologies and techniques which enable the intelligent control of the nanogrid, before presenting the hardware platform used to ensure the efficient operation of a small scale DG system. The paper then considers the interconnection of multiple nanogrids forming a network (microgrid), facilitating the sharing of power between individual nanogrids. The future developments are then explored before the paper's conclusions are presented. [ABSTRACT FROM AUTHOR]

Recognizing the multidimensional role that hydropower can potentially play in achieving a more sustainable energy supply system, this paper reviews a series of published economic, environmental and social indicators that are often used to characterize this energy source. Getting the right balance between measures assessing benefits and costs is often a challenge in complex evaluations. The current paper argues that present studies sometimes set system boundaries too narrowly so that they omit key factors associated with hydropower. In particular, the role that hydroelectric resources can play to stabilize the overall electrical grid, and thus to leverage investments in other intermittent renewables, is only rarely accounted for in sustainability assessments. Based on a broad literature review, the authors articulate two key recommendations for future assessments: first, that such assessments should reflect on policy issues as well as environmental challenges with respect to existing hydropower potential within the current framework; second, that system boundaries should be extended not only to allow broad hydrological, ecological and geological assessments, but also to reasonably estimate hydro's potential benefits to the functioning of the overall electrical grid. [ABSTRACT FROM AUTHOR]

Ocean renewables (such as offshore wind and wave) are abundant and essential energy resources for supporting future emission-free targets. However, their energy intermittency and high cost have hindered commercialization and wide-scale implementations of these ocean energy technologies. This paper focuses on both issues and aims to increase the dispatchability of ocean energy farms by investigating the potential of a hybrid wind and wave energy platform with energy storage systems (ESS). This research introduces an innovative method to assess the necessary ESS capacity for offshore renewable energy farms, ensuring energy dispatchability to the local demand. In addition, the key criteria and the economic feasibility of deploying ESS in offshore energy farms are also discussed. A life-cycle cost model is presented that quantitatively compares different farm configurations, specifically a standalone offshore wind farm and a hybrid configuration incorporating both wind and wave generation systems. The results indicate that the combined wind and wave energy farm significantly reduces the ESS requirement and provides competitive lifecycle costs compared to the stand-alone wind energy farm, though the amount of these benefits vary on the local resource characteristics. The quantitative assessment presented in this study also provides realistic and practical justifications for combined energy farms that complement statistical conclusions derived from variability indexes in previous studies. [Display omitted] • The techno-economic benefits of combined wind–wave farms are quantified. • A novel method of sizing and evaluating ESS for offshore farms is proposed. • The combined energy farm reduces ESS requirement compared to wind-only farms. • The benefits of combined energy farms are sensitive to the resource characteristics. [ABSTRACT FROM AUTHOR]

The African continent is endowed with massive energy resources such as hydropower, solar, wind, natural gas, wave energy, and many more, yet it is the continent with the least energy supply in the world thereby resulting in a lack of sufficient energy to meet its growing energy demand. Though the continent holds 100 GW of wind capabilities, the current installed capacity as at 2018 was 5.7 GW with countries in northern Africa as well as South Africa capturing over 90% of the wind energy share on the continent. Therefore, this paper reviews the wind energy industry in Africa by identifying the current installed and potential capacity of wind energy on the continent. The challenges faced by the wind energy industry such as policy, competition, technical and economic are also reviewed. Transitions, technological innovation systems, and strategic niche management theoretical sustainability transition framework as well as proposed pathways to overcome these prevailing challenges hindering the full exploration of the wind energy sector in Africa are also highlighted in order to uplift the continent's socio-economic status. Basically, this can be achieved through the adoption of strong 'political-will' by African national governments to drive wind energy development. There is also the need for institutional frameworks to ensure the practical adoption of new wind energy technologies. Furthermore, the major benefits Africa stands to gain from investment in wind energy are enumerated by comparing with the benefits realized by other countries' economies as a result of investing in the wind energy industry. For instance, cheap electricity, job creation, industrial growth, and eco-friendly energy source. • Reviewing wind energy industry in Africa and existing challenges. • The challenges faced by African's wind energy industry can be categorized under policy, competition, technical and economic. • Framework for transiting Africa's wind energy industry from small-scale production to large-scale commercial industry.. [ABSTRACT FROM AUTHOR]

This paper presents an overview about the hydro-thermal scheduling problem. In an electrical power system power generators have to be scheduled over a time horizon in order to supply system demand. The scheduling problem consists in dispatching the available generators to meet the system electric load while minimizing the operational costs related to fuel and possible load curtailments. In a system with a large share of hydro generation, different from a thermal dominant power system, the uncertainty of water inflows play an important role in the decision-making process. In this setting the scheduling of generators has to be determined considering different future possibilities for water availability. Also, in the existence of a cascade system, the availability of water to produce electricity in hydro plants is influenced by decisions taken in upstream reservoirs. These issues complicate the hydro-thermal scheduling problem that often in the literature is modeled as a multi-stage stochastic program. In this paper we aim to give an overview about the main ideas behind this problem. We present model formulations, a solution technique, and point out to new developments related to this research. [ABSTRACT FROM AUTHOR]

Variability and intermittency are some of the main features that characterize renewable energy sources. Intermittency usually includes both predictable and unpredictable variations. The many drawbacks of intermittency of renewable sources can be overcome by considering some special design considerations. Integrating more than one renewable energy source and including backup sources and storage systems are among the few measures to overcome these drawbacks. These additional design considerations usually increase the overall cost of the renewable system. Furthermore, the presence of more than one energy supply/storage system requires the control of energy flow among the various sources. Therefore, optimizing the size of the components and adopting an energy management strategy (EMS) are essential to decreasing the cost of the system and limiting its negative effects. The energy management strategy is commonly integrated with optimization to ensure the continuity of load supply and to decrease the cost of energy production. Therefore, energy management is a term that collects all the systematic procedures to control and minimize the quantity and the cost of energy used to provide a certain application with its requirements. The energy management strategy usually depends on the type of energy system and its components. Various approaches and techniques have been used to develop a successful energy management strategy. In this paper, a comprehensive review of the approaches proposed and used by authors of many papers is conducted. These approaches include both the standalone hybrid renewable energy systems and the grid-connected hybrid renewable systems. More attention is focused on popularly used techniques to address the features of each system. The selected papers in this review cover the various configurations of the hybrid renewable energy systems for electric power generation only. [ABSTRACT FROM AUTHOR]

Switching ripple filters (SRF) is one of the significant part of grid connected voltage source converters (VSC) that have been a backbone of the most of renewable energy systems for the last decade. SRFs have two main features for the grid connected VSC systems. One of these is to maintain a coupling connection and integration between grid and VSC. The other one is to prevent the penetration of switching ripple currents to the grid by filtering them. Several SRF topologies named as L, LC, LCL and LLCL type are presented in literature. In order to maintain effective switching ripple filtering, higher order SRF topologies are developed. However, these high order SRFs have resonance problems. To overcome resonance problems of higher order SRFs, passive and active damping methods are applied to SRFs. This paper presents a comprehensive review of SRFs used in grid connected VSCs. In the scope of this paper, the characteristics and the design procedures of SRFs are investigated. Also, both passive and active damping methods applied to the higher order SRFs are classified in detail with the latest studies presented in literature. [ABSTRACT FROM AUTHOR]

Stand-alone micro-grids (MGs) and grid-connected MGs with high penetration level of Distributed Generation (DG) are growing at a fast rate. In these grids, the power quality disturbances such as harmonics, inter-harmonics and deviation from the fundamental frequency are widespread. The influence of these disturbances on two categories of digital metering algorithms is evaluated in this paper. The first category is related to the measurement of the fundamental frequency component of current and voltage signals, which are used as inputs of the digital protection algorithms. Most of the relays only use fundamental frequency component of their input voltage and current signals to fulfill the desired protective functions. The accuracy of the protective relays highly depends on the performance of the applied algorithms for extracting the fundamental components. The second evaluated category is related to the reactive power calculation algorithms, which are used in the static VAr compensator (SVC) control system. Utilizing SVC is growing due to the DGs such as wind turbines magnify voltage fluctuations called flicker. Since the SVC compensates only the reactive power related to the fundamental frequency component, the reactive power signal should not be sensitive to the harmonics. In addition, the reactive power calculation should be fast enough that SVC can follow the abrupt changes to mitigate the flicker, efficiently. In this paper, frequency deviation, harmonic, and inter-harmonic phenomena are considered as the most causes for power quality problems. Their influence in digital metering algorithms is evaluated. It is confirmed that defining new indices is mandatory to fully reflect algorithms׳ accuracy and efficiency. Furthermore, the field measurements of instantaneous voltage and current of a wind farm and electric arc furnaces are used for the evaluation. [ABSTRACT FROM AUTHOR]

Operation of distributed energy resources and resilience related problems are becoming of most importance in the pursuit for a more sustainable electricity delivery. Microgrids (MGs) could contribute significantly to both issues and may play an important role in the new decentralized paradigm of power systems. This paper proposes a hierarchical organizational scheme of MGs with a clear distinction of the Microgrid, Nanogrid and Picogrid concepts, and addresses a detailed technical literature review to identify and classify MGs main features and design alternatives. Definitions; descriptions of MGs, Nanogrids, Picogrids; operation modes; business models and communication protocols are dispersed in the literature. In order to gather clearly all the existing information, this review has been organized according to four functional layers, inspired by the ones commonly used in Smart Grid architecture description. For each one and whenever possible, the paper classifies the outcomes of the review in a table kind of format that helps summarizing the different MGs׳ options. Regarding the first layer, the paper describes the different physical devices involved in MGs, such as generators, converters, electric vehicles (EV) and energy storage systems (DS) and the DC levels that are being discussed. For the second layer the paper addresses a review of the communication protocols currently used or proposed. Then, the intelligence layer is analyzed concerning any decision making issue related to operation and planning of the MGs as well as any other aspect that may be relevant for taking advantage of MGs potentiality. In the last layer, the paper reviews different business models adapted to a future where MGs will be deployed. Finally, the paper ends with an exhaustive review of the practical MG experiences in place worldwide, classified according to the issues presented previously, and a brief discussion of the key points to be addressed in the MGs deployment. [ABSTRACT FROM AUTHOR]

Between 60% and 80% of global energy is consumed in urban areas and given the projected increase in world׳s urban population, this share is expected to further increase in the future. Continuity of energy supply in cities is affected by climate change and a growing array of other threats such as cyber attacks, terrorism, technical deficiencies, and market volatility. Determined efforts, acknowledging the interactions and interlinkages between energy and other sectors, are needed to avoid adverse consequences of disruption in energy supply. Resilience thinking is an approach to management of socio-ecological systems that aims to develop an integrated framework for bringing together the (often) fragmented, diverse research on disaster risk management. The literature on urban resilience is immense and still growing. This paper reviews literature related to energy resilience to develop a conceptual framework for assessing urban energy resilience, identify planning and design criteria that can be used for assessing urban energy resilience, and examine the relationship of these criteria with the underlying components of the conceptual framework. In the conceptual framework, it is proposed that in order to be resilient, urban energy system needs to be capable of “planning and preparing for”, “absorbing”, “recovering from”, and “adapting” to any adverse events that may happen in the future. Integrating these four abilities into the system would enable it to continuously address “availability”, “accessibility”, “affordability”, and “acceptability” as the four sustainability-related dimensions of energy. The paper explains different resilience principles associated with these abilities and sustainability dimensions. Also, different planning and design criteria were extracted from the literature and categorized into five themes: infrastructure; resources; land use, urban geometry and morphology; governance; and socio-demographic aspects and human behavior. Examination of the relationship of these criteria with the underlying components of the conceptual framework highlighted the complexity and multi-faceted nature of energy resilience. Exploration of the relevance of the identified criteria to climate change mitigation and adaptation revealed that most of the identified criteria can provide both mitigation and adaptation benefits. [ABSTRACT FROM AUTHOR]

The population of Pakistan is increasing rapidly and hence the energy demand. Since ninety׳s, people of Pakistan has been experiencing load shedding because of the intense shortfall throughout the country. Pakistan, being an agricultural country, has a lot of potential of renewable energy sources especially biomass. The thing is to utilize the potential in a right direction. This paper presents the policy direction to get rid of the current energy crisis in the country through utilization of different types of biomass. The animal manure, municipal solid wastes and the crop residues are the main biomass sources in the country. This study also focuses the potential of main biomass sources present in the country and its technical routes for the production of bioenergy. The design parameters for standard bioreactor of gasifier and anaerobic digestion and their economic comparison are highlighted with respect to Pakistan environmental conditions. The development of anaerobic digestion technology is reviewed critically. This paper also discusses the different scenarios for the use of biomass sources in urban and rural environment. This verifies the use of biogas energy as the cheapest and the safest way to remove the crisis from the country. The stand-alone biogas plants should be constructed throughout the country where there is not electrification infrastructure exists. [ABSTRACT FROM AUTHOR]

Nuclear power has gradually become one of the key parts in power supply structure due to its environmental benefits, effective productivity and steady operation. However, complicated system, high investment and derivative security issues make it difficult to develop in a large scale. Nowadays, faced with serious challenges from environment protection, fossil fuel lacking and upgrading of industrial structure, China are taking measures to promote nuclear power industry to realize sustainable development. China׳s nuclear power industry has achieved large achievements in industrial policy, technical and economic condition during the last three decades. However, there still exist problems impeding its future development. Therefore, this paper first analyzes the external environment and historical stages of nuclear power industry in China. Then, it summarizes its current situation and points out the existing problems. In the end, to deal with the above problems, this paper proposes relative solutions from the aspects of industrial distribution optimization, regional resources integration, technical standard system, industrial organization mode and so on. [ABSTRACT FROM AUTHOR]

Applications of multiagent systems (MAS) in power engineering are of particular importance. However, little effort exists to provide an insight in MAS applications from the lens of power engineering practitioners. This paper is first in examining state of the art of MAS in power engineering. A comprehensive literature review is conducted and a novel taxonomy associated with research concerning MAS applications in power engineering is proposed. The paper shows that MAS is adaptable and applicable with different power engineering categories. The paper also concludes that the applications of MAS in different aspects of modern power systems, like planning, market, management, operation, control, monitoring and protection are anticipated to be of significance in the development smart grids. [ABSTRACT FROM AUTHOR]

The significant variation in building׳s energy intensity is partly due to the large number of distributed energy users characterized by heterogeneous lifestyles and nonuniform consumption behaviours. Understanding the degree of variation and its cause is critical to designing appropriate policies for energy efficiency improvement. This paper aims to provide a data-based benchmark of buildings energy performance in China and investigates the facts and causes of large variations in energy consumption across buildings based on updated and harmonised dataset. Specifically, the paper is the first in literature to decompose aggregate heating consumption in northern urban China and reallocate the disaggregate data to relevant residential and commercial building energy use, which makes it consistent to conduct international comparison of building performance in terms of primary energy intensity. It is found that buildings energy performance exhibits a sizeable heterogeneity varying with building typology and climate zones in China. Heating and cooling energy consumption for residential buildings located in HSCW climate zone may differ by a factor of 4–10 depending on the technology and energy supply mode, whereby nontechnical interventions may have significant impacts on total energy demand in the built environment. In particular, our analysis results point to the importance of making greater efforts in the commercial sector. Commercial buildings are found significantly more energy intensive than their residential counterpart, mainly due to the fact that BEE policy has been poorly implemented and architectural design has not been optimised in commercial sector. An estimate suggests that improving energy efficiency in the commercial sector may contribute to one-fifth of total energy savings potentials by 2020 in line with the IEA׳s 450 ppm scenario. It is necessary for Chinese building authorities to incorporate the heterogeneity characteristics across different climate zones and building typologies into BEE policy portfolio to effectively curb energy consumption related carbon emissions. [ABSTRACT FROM AUTHOR]

Electricity has become a vital source of energy for social and economic development in modern era. Likewise, the issues of its planning and management have grown complex. To address complexity in decision making, researchers have chosen system dynamics (SD) modelling and simulation technique. A state-of-art of such studies published during the period 2000–2013 is presented in this paper. The contribution of this review lies in categorizing the literature based on the important and contemporary researched areas. These research areas include models developed for policy assessment, generation capacity expansion, financial instruments, demand side management, mixing methods, and finally micro-worlds. Review shows that policy assessment and generation capacity expansion are the two most modelled topics. Financial instruments models evaluate different mechanism to support renewable technologies whereas mixing-methods channelize descriptive approach of SD into evaluating a single objective. Demand side management and micro-worlds are the least focused categories in SD. This paper also discusses the individual models in each category highlighting their construct, outcomes and any deficiencies. [ABSTRACT FROM AUTHOR]

United States’ Wind Vision report envisions wind energy to generate 20% and 35% of nation׳s electricity by 2030 and 2050 respectively. Taking in to account of the aforementioned vision, the electric power industry is promoting generation of wind power and integration into the US interconnection grids. Over the last decade, this fast growing grid connected wind power generation has raised several new technical, regulatory and economic concerns for grid operations and electricity markets. Therefore, it becomes essential to perform research study and determine possible solutions for the integration of high penetration levels of wind power with the power grid. This paper focuses on the grid integration issue associated with deteriorated frequency response of power system when significant levels of wind power generation is present in the total generation mix. A brief review of the recently introduced frequency response regulatory standards and requirements for wind power plants in United States is presented along with the turbine manufacturer׳s advanced grid technology upgrade options to maintain the power system reliability. This paper evaluates the provision of ancillary services such as Emulated Inertial Response (EIR) and Primary Frequency Response (PFR) by wind generation resources, and investigates the impact of different control architectures on frequency response metrics. Further, it discusses the costs, benefits and other economic impacts associated with the various frequency control techniques of wind power plants. Finally, guidelines and priorities for wind turbine manufacturers, generating entities, balancing authorities and regulators are provided to ensure the increased reliability without additional costs. [ABSTRACT FROM AUTHOR]

Due to its promising benefits in energy and environment, distributed energy system (DES) has increasingly attracted extensive attention worldwide. The application of DES has been increased rapidly in recent years with the supportive government policies and financial incentives. Therefore, it is necessary to systematically summarize and analyze the development status of DES in China. This paper not only presents researches, applications and policies, but provides some relevant suggestion and prospects on DES of China. DES especially the hybrid energy system that gas-fired combined cooling, heating and power (CCHP) with renewable energy (solar and wind) will become the mainstream of future energy supply technologies in China. The paper will be helpful for international stakeholders in energy field to have better understanding on the progress of DES in China, which will benefit them in two aspects: one is that the Chinese situation will be a reference for their own countries or regions to develop energy policy and technology regarding DES, another is that they may be helped to find opportunities in Chinese market, while to contribute to Chinese DES development. [ABSTRACT FROM AUTHOR]

The paper provides a review on solid biofuel usage in Lithuania after decommission of Ignalina NPP and cover the period 2007–2012. Lithuania has limited quantity of indigenous energy resources and is depended upon the import of energy resources, such as natural gas, petroleum and hard coal. Up to the year 2009 about 70–80% of electricity was produced from NPP. Lithuanian energy dependence from energy resources in 2009 was about 50.3%. At the end of 2009, NPP was decommissioned and the structure of gross inland fuel and energy consumption changed radically. Lithuania׳s energy dependence on the imports of fuel increased to about 82% and considerably exceeded the EU average 54%. The share of indigenous and renewable energy sources (RES) in gross inland fuel and energy consumption increased from 14.7% in 2009 to 21.4% in 2013 from which about 86% of RES belonged to solid biofuels. The RES became one of the main driving forces of the country׳s economy. In this paper, the Lithuanian solid biofuel resources and energy production up to the 2013 are presented. Growing stock volume, forest coverage, productivity of stands and consumption for energy production in Lithuania and its counties are defined. Fuels and energy flows diagram and distribution of solid biofuels by economy sectors and consumer groups are shown. Solid biofuels usage impact to gross inland and final energy consumption was studied. Implementation of solid biofuels for heat and electricity generation in Lithuania was researched. Solid biofuel prices were examined and comparison with prices of natural gas and fuel oil was done. Principles and criteria for sustainable solid biofuels production and usage were disclosed. The reduction of total greenhouse gases emissions in Lithuania and other EU countries were shown. Strategic initiatives to increase the RES share in electricity and heating sectors till 2020 were highlighted. [ABSTRACT FROM AUTHOR]

The occurrence of power swing had been reported to threaten the seamless operation of power system. Several cascaded outages and major blackouts in the world have been traced to mal-operation of distance relays due to power swing occurrences. As such, this paper will present a consolidated review on the power swing phenomenon, covering the causes of power swing, its impact to consumers and generators, as well as its detection and relay blocking schemes to prevent the mal-operation of distance relay. Given the wide arrays of power swing detection techniques and blocking schemes available up to date, particular attention is concentrated at the various power swing detection techniques on high voltage power system. In addition, the effect of modern renewable energy generations to the power swing characteristics is also presented in this paper. [ABSTRACT FROM AUTHOR]

As a good power supplement form of super power and large-scale energy base, distributed energy has the characteristics of less investment and flexible power generation. Facing with the double pressure of the sustainable development of energy use and environmental protection, it has become an efficient solution to meet the demand of load growth, reduce environmental pollution and improve the comprehensive utilization of energy and the reliability of power supply. However, the development of distributed energy starts relatively late in China and confronts many difficulties. So this paper analyzes the present development situation and existing problems of the distributed energy in China. Then it elaborates from the aspects of policies and regulations, technical specifications, price policy and grid-interconnection codes. At last, this paper puts forward relevant policy suggestions of the guarantee mechanism of distributed energy. This paper argues that, with the attention of the development of distributed energy increasing, a series of policies to promote the construction and interconnection of distributed energy will be introduced, and distributed energy will get scaled development in China. [ABSTRACT FROM AUTHOR]

The paper presents an enhanced scheme to control the dynamic response that can be delivered by distributed generation (DG) and renewable energy resource (RER) to be more reliable and stable than other electric systems. Robust Adaptive Emulated- Controller (RAEC) has been included to control and tune the adoption of controller parameters across a broad range of operating conditions. Some existing challenges related to high loading profiles that will be handled by new performance features. The objective of paper is to propose robust adaptive emulated-controller that is incorporated with high-speed fluctuations and dynamic energy systems. That can achieve an integrated system to reflect the enhanced structure and operation of electric systems, in addition to, Enhanced Mud Layers (EML) optimization will be applied to control and optimize the performance parameters. • A novel robust system is proposed to enhance the sustainable energy and renewables operation and dynamic performances. • The proposed technique supports the implications of energy resources for the sustainable communities and networks. • There are scenarios to consider the changes in the loading profiles, beside to the uncertain conditions. • The obtained results by the proposed technique have been appraised and examined. [ABSTRACT FROM AUTHOR]

Wind energy is a mature and cost-effective solution to greenhouse gas emission reduction and climate change mitigation. Wind resource assessment is the most pivotal activity before wind farm development since it determines the bankability of the wind project. Based on the joint use of a Doppler wind sodar (sonic detection and ranging) system and a microwave radiometer, this paper investigates the wind and thermal characteristics and wind energy resources in a coastal region of Hong Kong. First, wind climatology and variability, as well as their correlation with large-scale and local meteorological and geographical conditions, are analyzed and discussed. Then, statistical distributions of wind speed are evaluated, and the goodness-of-fit of the Weibull, Kappa, Wakeby, Normal-Weibull mixture, and Weibull-Weibull mixture distributions is assessed. Subsequently, the probability distribution and variation of atmospheric stability are examined, and their effects on vertical wind shear, wind profile, and wind speed at turbine hub height are revealed. Lastly, the spatiotemporal variation of wind power density is investigated with attention paid to air density. The results presented in this paper are expected to offer insights into coastal wind and thermal characteristics, provide references for vertical extrapolation of wind speed and wind turbine load evaluation, and facilitate wind farm development in coastal regions. • Investigation of coastal wind climatology and variability in Hong Kong. • Evaluation of statistical distributions of wind speed, gradient Richardson number, and air density. • Exploration of vertical variation of wind speed, air density, and wind power density. • Analysis of wind shear coefficient under different atmospheric stability conditions. • First known study of wind resources that jointly uses sodar and microwave radiometer. [ABSTRACT FROM AUTHOR]

Smart Grid benefits from information and communications technology (ICT) to integrate data from different sources across the network. The growing market for electric vehicles (EV) and electric devices is increasing energy demand. To manage a large amount of complex intelligent equipment, EV charging and discharging, and data-intensive devices, a reliable modern smart grid with a service-oriented, secure, efficient, and cost-effective system is compelling. Cloud computing is a promising approach to achieve that objective as monitoring power grid data flow and data center management are the key. This paper proposes an optimization model for energy management within the power cloud. Our energy system model enables accessible services to computing resources and real-time data stream processing within an integrated environment. Using digital technology, the proper implementation of our model reduces costs and energy consumption and improves the smart grid reliability for customers and energy providers in a distributed manner. This paper presents the implementation of a three-procedure optimization algorithm within a novel Multi-Agent Cloud-fog Structure (MACS) to meet the requirements raised by smart grid communication and distribution. Our model promotes reliable energy consumption adjustments by end-users who can choose power supplied by solar, wind, geothermal, biomass, or other renewable sources or from non-renewable sources in ways that reveal opportunities for demand-supply balance and energy saving. • Comprehensive review of cloud approaches in the context of specific areas. • Enhancing dynamic energy network communications using a multiagent cloud-fog. • Considering IoT and advanced meter infrastructure integration in smart grid. • Optimization modeling development for energy network management in smart grid. • Detailed analysis of simulation results considering modeling assumptions. [ABSTRACT FROM AUTHOR]

Energy is the basic necessity for life and a key factor to excel a country’s economy. Pakistan despite being richly blessed with natural energy resources is dependent on foreign sources and is currently facing severe energy deficiency. At the time of its independence in 1947, Pakistan inherited 60 MW of power. The energy sector had made some progress in the beginning but unfortunately the growth in positive curve couldn’t last long. The dilemma of the ever increasing gap between demand and supply has rendered Pakistan an energy deficient country where most the people have none or limited access to electricity. This paper gives an overview of the energy status of Pakistan. In this paper, I have discussed (a) major aspects of energy sector of Pakistan—its establishment, history and accomplishments, (b) various institutions for energy generation and distribution, (c) total installed and generation capacity, (d) current energy reserves in the country such as coal, oil, natural gas, nuclear energy, as well as the renewable energy resources which include wind energy, biogas, Hydel energy, geothermal energy, solar energy, tidal and wave energy, (e) current energy crisis in the power sector, discussing the key issues leading to the origin, causes and consequences of the problem. The paper also presents; (f) possible solutions to overcome this crisis which is becoming hazardous for the country’s economy. The various government, semi-government and private organizations and their efforts to resolve the situation of energy deficit and (g) renewable energy can provide an alternative form of energy, why and how it can provide better replacement of other forms of energy, barriers that halt progress in this area and various renewable energy projects have also been illustrated. The goals, principles and impacts of the National Power Policy—2013 is also mentioned in this paper. [ABSTRACT FROM AUTHOR]

In the coming decades the energy sector will have to face three major transformations concerned with climate change, security of supply and energy poverty. The first two have been extensively analysed, but less attention has been paid to the third, even though it has a great influence on the lives of millions of people. This paper presents an overview on energy poverty, different ways of measuring it and its implications. According to the WHO, indoor pollution causes an estimated 1.3 million deaths per annum in low income countries associated with the use of biomass in inadequate cookstoves. Although energy poverty cannot be delinked from the broader, more complex problem of poverty in general, access to energy infrastructures would avoid its most serious consequences and would help to encourage autonomous development. According to the IEA, the cost of providing universal access to energy by 2030 would require annual investment of $35 billion, i.e. much less than the amount provided annually in subsidies to fossil fuels. Finally, the paper argues that energy and energy poverty need to be incorporated into the design of development strategies. [ABSTRACT FROM AUTHOR]

The nexus between trade openness and energy demand is hot topic of discussion among academicians and researchers, and numerous studies are available in existing literature while investigating the nexus between trade openness and energy demand. This paper explores the relationship between energy consumption, trade openness and economic growth in case of Thailand. In doing so, we have applied Bayer and Hanck cointegration approach to test whether the long run relationship exists between the variables. Our results confirm the presence of cointegration between the variables. Energy consumption stimulates economic growth. Trade openness adds in economic growth. The causality analysis reveals that energy consumption Granger causes economic growth and in resulting, economic growth Granger causes energy consumption. Trade openness and energy consumption are interdependent i.e. trade openness Granger causes energy consumption and in return, energy consumption Granger causes trade openness. This paper openness up new directions for policy making authorities in Thailand to design a comprehensive energy and trade policies to sustain economic growth for long run. [ABSTRACT FROM AUTHOR]

This paper analyzes the capability of Reunion Island to achieve electricity autonomy by 2030. Currently, electricity production in Reunion Island is mainly based on imported fuels while it is blessed with high levels of renewable energy potentials. The issue addressed in this paper is the technical and economical feasibility of this ambitious target. The approach relies on a prospective study conducted by the TIMES-Reunion model which provides future production mixes according to different scenarios. It is combined with a quantitative assessment of reliability of power supply with two reliability indicators, regarding that intermittent sources may highly develop and consequently worsen reliability. This study enables us to draw three main conclusions: (i) electricity autonomy can be achieved thanks to high levels of biomass production and of intermittent sources; (ii) however, since fuel oil׳s power plants appear as back-up units, the reliability of power supply will be lowered. This is illustrated by the decrease of the reliability indicators over the time horizon; (iii) however, provided that appropriate rules on the instantaneous production are enforced, a generation mix that both complies with the electricity autonomy target and with a satisfying reliability of power supply is possible. [ABSTRACT FROM AUTHOR]

This paper presents a review of a standalone and grid-connected hybrid renewable energy system (HRES) to supply AC loads. The configuration of the HRESs and interfacing power converters for connecting the energy sources to the AC bus is extensively discussed. An overview of the control concepts in an HRES and the application of the appropriate control schemes for system stabilization, effective injection of high quality power and proper load sharing are discussed. The different approaches for HRES design and control strategies for power converters in the recently published literature are also briefly addressed. Finally, this paper highlights the future developments in HRESs to increase the utilization of power generated from renewable energy sources (RESs). [ABSTRACT FROM AUTHOR]

With the increasingly severe global environmental problems and the decrease of the storage of the fossil energy, renewable energy sources (RES) are drawing more and more attention. In China, renewable energy generation (REG) is experiencing a rapid development; however, its investment, transmission and management remain immature and deficient compared with those of the developed countries. First, this paper summarises the developing situation of REG in China through taking the booming wind power and photovoltaic power as examples, indicating that the grid connection rate of REG has yet to be improved. Then, this paper focuses on the grid connection management mode of REG in China which includes the following aspects: operation management, organisation management and grid connection incentive policy. Third, based on the above research, this paper analyses the existing problems of the grid connection management mode of REG. Finally, a coordinated management mechanism is proposed to solve the problems impeding large-scale grid connection of REG in China, including the coordinated management mechanism of integrated planning and transmission. [ABSTRACT FROM AUTHOR]

Rapidly increasing energy demand and growing concern about economic and environmental consequences call for renewable/sustainable energy technologies׳ adoption in India. Renewable/sustainable energy technologies have faced a number of constraints that have affected their rate of adoption. In this paper an attempt has been made to identify and rank the major barriers in the adoption of ‘renewable and green’ energy technologies in the Indian context. Twenty-eight barriers have been identified from an extensive literature review. These identified barriers have been categorized into seven dimensions of barriers, i.e. Economical & Financial; Market; Awareness & Information; Technical; Ecological and Geographical; Cultural & Behavioral; and Political & Government Issues. Analytical Hierarchy Process (AHP) technique has been utilized for ranking of barriers to adopt renewable/sustainable technologies in the Indian context. All pair comparisons in AHP have been made based on experts’ opinions (selected from academia and industry). Sensitivity analysis has also been made to investigate the priority ranking stability of barriers to adopt renewable/sustainable technologies in the Indian context. This paper may help practitioners, regulators and academician focus their future efforts in adoption of ‘renewable/sustainable energy technologies’ in India. Further, this understanding may be helpful in framing the policies and strategies towards adoption of renewable/sustainable energy technologies. [ABSTRACT FROM AUTHOR]

Taiwan, located in a subtropical area, is a high energy-importing nation with approximately 98% of our energy supplied by imported fuels since 2000. In this regard, renewable electricity systems from its richness of solar radiation and strong monsoon are thus becoming attractive due to the energy, economic, and environmental policies for pursuing clean electricity supply, sustainable development and greenhouse gases emission mitigation in Taiwan. The objective of this paper was to present an analysis of profitable promotion and innovative measures for renewable electricity in Taiwan because the photovoltaic (PV) power and wind power systems have rapidly increased the total installed capacity from 2.7 MW in 2000 to 1006.2 MW in 2013. The description in the paper was thus summarized on an analysis of renewable electricity supply since 2000 and its future goals up to 2030, and then centered on the new promotion legislation (i.e., Renewable Energy Development Act) in the measures of feed-in tariff (FIT) and tax/subsidy incentives. Current subsidiary and innovative programs to promote the development of renewable electricity technologies, including roof-type PV power, off-shore wind power and biogas-to-power, were also described. Due to its innovation promotion for renewable energy exploitation in recent years, Pingtung County, located in the southernmost of Taiwan, was introduced as a case study. Finally, some recommendations for promote renewable electricity development were addressed in the paper. [ABSTRACT FROM AUTHOR]

With the development of decentralized power sources based on renewable energy, power grids need smarter operations to be run properly. This paper investigates different procedures for the optimal power dispatching of a grid-connected prosumer with an energy storage consisting in a high speed flywheel. An off-line optimal scheduling for the day ahead aims at minimizing the cost with regards to the daily energy rates and considering the forecasts for both consumption and production. That dispatching is performed thanks to global optimization procedures based on a trust-region method or on a niching genetic algorithm. Another approach using step by step optimization and exploiting an original self-adaptive dynamic programming strategy is also developed. The paper discusses the performance of all the considered methods with regards to the obtained results and the computational time. [ABSTRACT FROM AUTHOR]