Search

The increasing demand for renewable energy sources has led to the development of HRES that combine multiple sources of renewable energy to provide a reliable and efficient energy supply. However, renewable energy sources typically come with higher costs than conventional energy production methods. Hence, the optimal sizing of HRES is essential to prevent the oversizing of the system while ensuring a reliable supply of load demand, accommodating variations in meteorological conditions and changes in power demand. Numerous research papers addressing the optimal sizing problem are available in the literature. However, none of the mentioned studies take into account the power degradation of all renewable sources. The degradation of renewable sources, such as PV and WT, can have a significant impact on the performance of HRES. The degradation of PV panels can result in reduced efficiency and output, leading to a decrease in the overall energy production of the HRES. Similarly, WT may experience wear and tear over time, leading to reduced performance and output. The reduction in the output of renewables in the standalone system causes an increase in the loss of power supply probability (LPSP). This paper analyzes the optimal sizing of the HRES, considering the degradation of the sources. Further, analysis has also been carried out based on the number of BESS to be added to HRES to meet the derived constraints and their impact on the cost of energy as well. [Display omitted] [ABSTRACT FROM AUTHOR]

The increasing demand for renewable energy sources has led to the development of HRES that combine multiple sources of renewable energy to provide a reliable and efficient energy supply. However, renewable energy sources typically come with higher costs than conventional energy production methods. Hence, the optimal sizing of HRES is essential to prevent the oversizing of the system while ensuring a reliable supply of load demand, accommodating variations in meteorological conditions and changes in power demand. Numerous research papers addressing the optimal sizing problem are available in the literature. However, none of the mentioned studies take into account the power degradation of all renewable sources. The degradation of renewable sources, such as PV and WT, can have a significant impact on the performance of HRES. The degradation of PV panels can result in reduced efficiency and output, leading to a decrease in the overall energy production of the HRES. Similarly, WT may experience wear and tear over time, leading to reduced performance and output. The reduction in the output of renewables in the standalone system causes an increase in the loss of power supply probability (LPSP). This paper analyzes the optimal sizing of the HRES, considering the degradation of the sources. Further, analysis has also been carried out based on the number of BESS to be added to HRES to meet the derived constraints and their impact on the cost of energy as well. [Display omitted] [ABSTRACT FROM AUTHOR]

Energy is one of the essential components for the social and economic growth of urban and rural communities worldwide. However, the lack of energy supply is one of the most significant challenges facing remote or local communities in Nigeria. Distributed generation systems based on renewable energy, conventional sources, or hybrid resources are possible energy production solutions for these communities. This paper, therefore, focused on providing an energy generation system based on photovoltaics (PV) and diesel generators (DG) for stand-alone applications. A comparative analysis was carried out to assess the impact of control strategies, namely load following (LF), cycle charging (CC), and combined dispatch (CD). The designed energy systems: 60 kW PV, 78.69 kW PV, PV-DG-LF, PV-DG-CC, and PV-DG-CD were simulated using HOMER Pro while technical, economic, and environmental indices were used as performance metrics. Simulation results showed that 60 kW PV generated 84,927 and 75,859 kWh, without and with temperature effect, respectively, with the corresponding unmet electric load (UEL) of 13.8 and 14.2%. The result further demonstrated that PV-DG-LF is the optimal design with the highest renewable penetration of 80.7% and the least annual total fuel consumption (TFC) of 6,594 l. The economic results further confirm the suitability of PV-DG-LF with the lowest fuel cost (FC) and moderate cost of energy (COE) of $219,934 and 0.302 $/kWh, respectively. The PV-DG-LF is found to be more environmentally friendly, with the least annual CO 2 emission of 16,629.652 kg. The study considers veritable strategies to achieve affordable, clean, and reliable energy in line with research efforts on realizing the sustainable development goal (SDG) 7. [ABSTRACT FROM AUTHOR]

The proliferation of charging stations entails multiple challenges for power systems. In this regard, the installation of photovoltaic-battery systems may help to mitigate the negative effects of charging points. However, such assets should be carefully planned, paying attention to economic aspects, principally. Most of existing works optimize the photovoltaic-battery system in charging infrastructures taking a representative-space of the involved variables (e.g. photovoltaic potential, charging demand or energy prices). However, this approach tends to ignore low-probable scenarios. Thus, the best-case scenario for charging demand (i.e. that for which the highest charging profit is accessible) may not be included in the analysis and therefore such demand could be not attended properly, thus losing this monetary opportunity. This paper focuses on this issue and questions if considering the best-case scenario into planning photovoltaic-battery systems for charging stations is worthwhile or not. To this end, a novel best-case-aware planning tool is developed, including the best-case scenario through a novel chance-constrained formulation. The overall problem is then decomposed into a master-slave structure by which the economy of the system is optimized together with the number of scenarios for which the best-case profile can be attended. A case study serves to validate the developed tool and shed light on the questions arisen in this work. In particular, it is checked that considering the best-case scenario into planning tools is questionable from a monetary point of view. Nevertheless, its inclusion unlocks some collateral advantages such as incrementing the users' satisfaction or reducing the grid-dependency. [ABSTRACT FROM AUTHOR]

With the growing share of the climate-sensitive renewable energy market supply in China, estimating future energy drought risk (ED) is essential. In this paper, based on CMIP6, energy demand and power generation are estimated from 2023 to 2100 under SSP2-4.5 and SSP5-8.5 climate scenarios, and ED is defined from high demand (HD), low wind-solar generation (LWS), and residual load (RL). The results show that the ED exacerbation is relatively high under the SSP5-8.5. Between 2023 and 2100, the duration and severity of HD and RL notably increase, while LWS changes are relatively weak. We find that HD and RL exhibit high summer risks in the south and high winter risk in the north. The return periods vary significantly and extends over time in most regions. Moreover, there are few ED when the installed power generation capacity (IPGC) is increased. When the IPGC increases by 2%–5%, the LWS will decrease at least 20%–72%. With a 10% increase, the LWS will be mitigated by at least 80%, whereas the mitigation for RL is limited, approximately 3–17% at different rates. This work performs the first evaluation of future ED and provides the useful references for risk mitigation in China based on CMIP6. [ABSTRACT FROM AUTHOR]

Saudi Arabia plans to shift a large portion of its domestic energy production away from fossil fuel towards solar energy by 2030. Yet, the solar energy pool is mainly targeting photovoltaic technology. This study analyzes the potential of cleaner energy production from solar energy using concentrated solar power technology. First, different locations for concentrated solar power technology deployment are assessed based on potential development opportunities, solar resources, and infrastructure. Second, the paper assesses the performance and financial feasibility of four concentrated solar power technologies using the capacity factor, levelized cost of energy, and energy yield. The analysis indicates that all the considered locations are suitable for concentrated solar power technologies with a preference for the NEOM city located in the northern region of Saudi Arabia. The simulation results revealed that solar tower technology produces the highest energy yield of 2738 kWh/kW. The levelized cost of energy for the four technologies varies between 14.54 and 22.67 ¢/kWh, with linear Fresnel demonstrating the lowest and parabolic trough exhibiting the highest levelized cost of energy. [ABSTRACT FROM AUTHOR]