Search

The paper presents an experimental investigation of a solar dish concentrating system with thermal collectors, along with a numerical investigation of a solar cooling installation based on such system by means of dynamic simulation. The main aim of this study is the analysis of heat generation from the system for heating and cooling purposes, with the use of sorption chillers. A computer simulation of the dynamic operation of the proposed solar heating and cooling system was developed within TRNSYS software. The experimental data were used to validate the model of the concentrator and solar collectors. Successively, a solar heating and cooling installation for a residential application, integrating the different configurations of solar energy collecting devices and thermally driven chillers, was proposed and dynamically simulated. Flat-plate, evacuated tube and photovoltaic-thermal collectors were considered along with absorption and adsorption chiller units. In the present study, different system configurations, localities and time bases were considered to investigate the energy and economic performance of the system. The model of the solar dish and collector arrangement overestimates the produced energy by less than 5% as compared to the experimental study. The results show that the space cooling demand is matched in 23.6 and 46.2% by solar energy in Warsaw, while in Lisbon from 38.2 to 46.1%. The simple payback period of the investigated system configuration was for Warsaw between 18.1 years for the combination of flat-plate collector and absorption chiller and 27.2 year for the photovoltaic-thermal collector with adsorption chiller. • A hybrid solar heating and cooling system was investigated dynamically. • Experiments were performed on flat-plate collectors and dish concentrator set-up. • Different configurations of solar collectors and sorption chillers were investigated. • For Warsaw location, despite a good energy yield, Simple Pay Back is above 18 years. [ABSTRACT FROM AUTHOR]

Abstract: Nowadays in many countries the increase of generating capacity takes place in small units within the framework of so-called distributed power industry (distributed generation – DG, embedded generation), and among them in hybrid power systems (HPS). In this paper we present our experience of the design, build and exploitation of HPS in the Institute of Electrical Power Engineering, Warsaw University of Technology. The following major subjects are considered: [■] the experience of exploitation of a hybrid solar – wind power plant, [■] a solar power plant with a fuel cell, [■] the concept of a wind power plant with a battery energy storage, [■] the utilisation of a DC micro-grid for the integration of different electrical energy sources. [Copyright &y& Elsevier]