Search

Whilst present buildings are still often energivorous systems, in the near future they will have to be converted to (or replaced by) zero energy buildings, also capable to export green energy (produced on-site by renewables) towards other buildings and/or users. Specifically, the paper focuses on the performance of naturally ventilated BIPV façade elements taking into account the total heat flow inside the building and the temperature of the building walls. 3 Building integrated photovoltaic collectors In the next few years, a further diffusion of PV collectors will be achieved by Building Integrated Photovoltaic (BIPV) devices, that will also overcome the unesthetic and functional issues of stand-alone and building-adjacent PV systems. 7 Building envelope technologies In order to reduce the heating and cooling energy demands of buildings and/or to improve the related comfort performance, different innovative envelope materials and/or design solutions for opaque and transparent building elements can be adopted. [Extracted from the article]

An advanced mathematical model capable of simulating the energy performance of an innovative Integrated Collector Storage Solar Water Heater (ICSSWHs) is presented. Usually, ICSSWH devices available in the market are typically simple and low-cost, combining solar heat collection and storage functions in one unified vessel. However, they exhibit higher heat loss characteristics when compared to standard solar collector systems, with a subsequent reduction in energy performance during night-time and non-collecting hours. An innovative ICSSWH prototype was developed at the Centre for Sustainable Technologies (CST) at Ulster University using a patented, innovative thermal diode feature, attained by incorporating a liquid-vapour phase change material (PCM) and very low pressures. In order to fully investigate the energy performance of the proposed prototype, a suitably dynamic simulation model has been developed and validated in MatLab environment. All modelled temperatures are ±1 °C from the respective experimental measurements. The developed model has been used to evaluate the ICSSWH energy performance by varying several pivotal parameters (physical features and materials) in order to produce an optimised device. • A novel thermal diode feature is achieved by incorporating a liquid-vapour PCM in a multi-vessel solar water heater. • Dynamic simulation analysis is used to characterise a thermal diode feature in a novel ICSSWH unit. • MatLab environment was used to develop to model the novel thermal diode operation, validated using experimental data. • All modelled temperatures show good agreement with the experimental measurements. • Thermal diode ICSSWHs can produce higher temperatures than simpler ICS units. [ABSTRACT FROM AUTHOR]