Search

In this work, we consider a covert communication scenario, where a transmitter Alice communicates to a receiver Bob with the aid of a probabilistic and uninformed jammer against an adversary warden's detection. The transmission status and power of the jammer are random and follow some priori probabilities. We first analyze the warden's detection performance as a function of the jammer's transmission probability, transmit power distribution, and Alice's transmit power. We then maximize the covert throughput from Alice to Bob subject to a covertness constraint, by designing the covert communication strategies from three different perspectives: Alice's perspective, the jammer's perspective, and the global perspective. Our analysis reveals that the minimum jamming power should not always be zero in the probabilistic jamming strategy, which is different from that in the continuous jamming strategy presented in the literature. In addition, we prove that the minimum jamming power should be the same as Alice's covert transmit power, depending on the covertness and average jamming power constraints. Furthermore, our results show that the probabilistic jamming can outperform the continuous jamming in terms of achieving a higher covert throughput under the same covertness and average jamming power constraints.

Reconfigurable intelligent surface (RIS) is a promising technology for future 6G communications and has been used to enhance secrecy performance. However, the performance improvement is restricted by the 'double fading' effect of the reflection channel link. To address this issue, we introduce an active RIS design, where the reflecting elements of RIS not only adjust the phase shift but also amplify the reflected signal through the amplifier integrated into its elements. To obtain a satisfactory solution to the non-convex problem resulting from this design, the penalty dual decomposition based alternating gradient projection (PDDAPG) method is proposed. We compare the proposed algorithm with decoupling-fraction-based alternating optimization (DFAO). Specifically, the complexity of the proposed algorithm grows linearly with the number of reflective units in the RIS, while the complexity of the benchmark algorithm increases with the power of 4.5 times the number of reflective units. To further address the quality of service (QoS) constraints regarding the information rate requirements of users, we apply the fractional programming (FP) method and the successive convex approximation (SCA) method to optimize the precoder of the base station (BS) and the active beamformers of the phase shifts. The simulation results have demonstrated the effectiveness of the proposed PDDAPG method. Moreover, the active RIS can effectively mitigate the influence of 'double fading' effects and achieve higher energy efficiency (EE) compared to passive RIS.

Enhancing information security has become increasingly significant in the digital age. This paper investigates the concept of physical layer security (PLS) within a relay-aided power line communication (PLC) system operating over a multiple-input multiple-output (MIMO) channel based on MK model. Specifically, we examine the transmission of confidential signals between a source and a distant destination while accounting for the presence of multiple eavesdroppers, both colluding and non-colluding. We propose a two-phase jamming scheme that leverages a full-duplex (FD) amplify-and-forward (AF) relay to address this challenge. Our primary objective is to maximize the secrecy rate, which necessitates the optimization of the jamming precoding and transmitting precoding matrices at both the source and the relay while adhering to transmit power constraints. We present a formulation of this problem and demonstrate that it can be efficiently solved using an effective block coordinate descent (BCD) algorithm. Simulation results are conducted to validate the convergence and performance of the proposed algorithm. These findings confirm the effectiveness of our approach. Furthermore, the numerical analysis reveals that our proposed algorithm surpasses traditional schemes that lack jamming to achieve higher secrecy rates. As a result, the proposed algorithm offers the benefit of guaranteeing secure communications in a realistic channel model, even in scenarios involving colluding eavesdroppers.

The digitisation of agriculture, integral to Agriculture 4.0, has brought significant benefits while simultaneously escalating cybersecurity risks. With the rapid adoption of smart farming technologies and infrastructure, the agricultural sector has become an attractive target for cyberattacks. This paper presents a systematic literature review that assesses the applicability of existing cyber threat intelligence (CTI) techniques within smart farming infrastructures (SFIs). We develop a comprehensive taxonomy of CTI techniques and sources, specifically tailored to the SFI context, addressing the unique cyber threat challenges in this domain. A crucial finding of our review is the identified need for a virtual Chief Information Security Officer (vCISO) in smart agriculture. While the concept of a vCISO is not yet established in the agricultural sector, our study highlights its potential significance. The implementation of a vCISO could play a pivotal role in enhancing cybersecurity measures by offering strategic guidance, developing robust security protocols, and facilitating real-time threat analysis and response strategies. This approach is critical for safeguarding the food supply chain against the evolving landscape of cyber threats. Our research underscores the importance of integrating a vCISO framework into smart farming practices as a vital step towards strengthening cybersecurity. This is essential for protecting the agriculture sector in the era of digital transformation, ensuring the resilience and sustainability of the food supply chain against emerging cyber risks.

To provide important prior knowledge for the direction of arrival (DOA) estimation of UAV emitters in future wireless networks, we present a complete DOA preprocessing system for inferring the number of emitters via a massive multiple-input multiple-output (MIMO) receive array. Firstly, in order to eliminate the noise signals, two high-precision signal detectors, the square root of the maximum eigenvalue times the minimum eigenvalue (SR-MME) and the geometric mean (GM), are proposed. Compared to other detectors, SR-MME and GM can achieve a high detection probability while maintaining extremely low false alarm probability. Secondly, if the existence of emitters is determined by detectors, we need to further confirm their number. Therefore, we perform feature extraction on the the eigenvalue sequence of a sample covariance matrix to construct a feature vector and innovatively propose a multi-layer neural network (ML-NN). Additionally, the support vector machine (SVM) and naive Bayesian classifier (NBC) are also designed. The simulation results show that the machine learning-based methods can achieve good results in signal classification, especially neural networks, which can always maintain the classification accuracy above 70% with the massive MIMO receive array. Finally, we analyze the classical signal classification methods, Akaike (AIC) and minimum description length (MDL). It is concluded that the two methods are not suitable for scenarios with massive MIMO arrays, and they also have much worse performance than machine learning-based classifiers.

Driven by the rapidly growing demand for information security, covert wireless communication has become an essential technology and attracted tremendous attention. However, traditional wireless covert communication is continuously exposing the inherent limitations, creating challenges around deployment in environments with a large number of obstacles, such as cities with high-rise buildings. In this paper, we propose an intelligent reflecting surface (IRS)-assisted covert communication system (CCS) for communicating with a friendly unmanned aerial vehicle (UAV) in which the UAV generates artificial noise (AN) to interfere with monitoring. Furthermore, we model the power of AN emitted by the UAV using an uncertainty model, through which the closed-form detection error probability (DEP) of the covert wireless communication for monitoring is derived. Under the derived DEP, we formulate the optimization problem to maximize the covert rate, then design an iterative algorithm to solve the optimization problem and obtain the optimal covert rate using Dinkelbach method. Simulation results show that the proposed system achieves the maximum covert rate when the phase of the IRS units and the trajectory and transmit power of the UAV are optimized jointly.

In this paper, we address the challenge of low recognition rates in existing methods for radar signals from unmanned aerial vehicles (UAV) with low signal-to-noise ratios (SNRs). To overcome this challenge, we propose the utilization of the bispectral slice approach for accurate recognition of complex UAV radar signals. Our approach involves extracting the bispectral diagonal slice and the maximum bispectral amplitude horizontal slice from the bispectrum amplitude spectrum of the received UAV radar signal. These slices serve as the basis for subsequent identification by calculating characteristic parameters such as convexity, box dimension, and sparseness. To accomplish the recognition task, we employ a GA-BP neural network. The significant variations observed in the bispectral slices of different signals, along with their robustness against Gaussian noise, contribute to the high separability and stability of the extracted bispectral convexity, bispectral box dimension, and bispectral sparseness. Through simulations involving five radar signals, our proposed method demonstrates superior performance. Remarkably, even under challenging conditions with an SNR as low as −3 dB, the recognition accuracy for the five different radar signals exceeds 90%. Our research aims to enhance the understanding and application of modulation recognition techniques for UAV radar signals, particularly in scenarios with low SNRs.

As excellent tools for aiding communication, an intelligent reflecting surface (IRS) and an unmanned aerial vehicle (UAV) can extend the coverage area, remove the blind area, and achieve a dramatic rate improvement. In this paper, we improve the secrecy rate (SR) performance of directional modulation (DM) networks using an IRS and UAV in combination. To fully explore the benefits of the IRS and UAV, two efficient methods are proposed to enhance the SR performance. The first approach computes the confidential message (CM) beamforming vector by maximizing the SR, and the signal-to-leakage-noise ratio (SLNR) method is used to optimize the IRS phase shift matrix (PSM), which is called Max-SR-SLNR. To reduce the computational complexity, the CM, artificial noise (AN) beamforming, and IRS phase shift design are independently designed in the following method. The CM beamforming vector is constructed based on the maximum ratio transmission (MRT) criteria along the channel from Alice-to-IRS, the AN beamforming vector is designed by null-space projection (NSP) on the remaining two channels, and the PSM of the IRS is directly given by the phase alignment (PA) method. This method is called the MRT-NSP-PA. The simulation results show that the SR performance of the Max-SR-SLNR method outperforms the MRT-NSP-PA method in the cases of small-scale and medium-scale IRSs, and the latter approaches the former in performance as the IRS tends to a larger scale.

The angle of arrival (AOA) is widely used to locate a wireless signal emitter in unmanned aerial vehicle (UAV) localization. Compared with received signal strength (RSS) and time of arrival (TOA), AOA has higher accuracy and is not sensitive to the time synchronization of the distributed sensors. However, there are few works focusing on three-dimensional (3-D) scenarios. Furthermore, although the maximum likelihood estimator (MLE) has a relatively high performance, its computational complexity is ultra-high. Therefore, it is hard to employ it in practical applications. This paper proposed two center of inscribed sphere-based methods for 3-D AOA positioning via multiple UAVs. The first method could estimate the source position and angle measurement noise at the same time by seeking the center of an inscribed sphere, called the CIS. Firstly, every sensor measures two angles, the azimuth angle and the elevation angle. Based on that, two planes are constructed. Then, the estimated values of the source position and the angle noise are achieved by seeking the center and radius of the corresponding inscribed sphere. Deleting the estimation of the radius, the second algorithm, called MSD-LS, is born. It is not able to estimate angle noise but has lower computational complexity. Theoretical analysis and simulation results show that proposed methods could approach the Cramér–Rao lower bound (CRLB) and have lower complexity than the MLE.

Recently, intelligent reflecting surfaces (IRSs) and unmanned aerial vehicles (UAVs) have been integrated into wireless communication systems to enhance the performance of air–ground transmission. To balance performance, cost, and power consumption well, a hybrid IRS and UAV-assisted directional modulation (DM) network is investigated in this paper in which the hybrid IRS consisted of passive and active reflecting elements. We aimed to maximize the achievable rate by jointly designing the beamforming and phase shift matrix (PSM) of the hybrid IRS subject to the power and unit-modulus constraints of passive IRS phase shifts. To solve the non-convex optimization problem, a high-performance scheme based on successive convex approximation and fractional programming (FP) called the maximal signal-to-noise ratio (SNR)-FP (Max-SNR-FP) is proposed. Given its high complexity, we propose a low-complexity maximal SNR-equal amplitude reflecting (EAR) (Max-SNR-EAR) scheme based on the maximal signal-to-leakage-noise ratio method, and the criteria of phase alignment and EAR. Given that the active and passive IRS phase shift matrices of both schemes are optimized separately, to investigate the effect of jointly optimizing them to improve the achievable rate, a maximal SNR majorization-minimization (MM) (Max-SNR-MM) scheme using the MM criterion to design the IRS PSM is proposed. Simulation results show that the rates harvested by the three proposed methods were slightly lower than those of the active IRS with higher power consumption, which were 35% higher than those of no IRS and random phase IRS, while passive IRS achieved only about a 17% rate gain over the latter. Moreover, compared with the Max-SNR-FP, the proposed Max-SNR-EAR and Max-SNR-MM methods caused obvious complexity degradation at the price of slight performance loss.

To provide rapid direction finding (DF) for unmanned aerial vehicle (UAV) emitters in future wireless networks, a low-complexity direction of arrival (DOA) estimation architecture for massive multiple-input multiple-output (MIMO) receiver arrays is constructed. In this paper, we propose two strategies to address the extremely high complexity caused by eigenvalue decomposition of the received signal covariance matrix. Firstly, a rapid power iterative rotational invariance (RPI-RI) method is proposed, which adopts the signal subspace generated by power iteration to obtain the final direction estimation through rotational invariance between subarrays. RPI-RI causes a significant complexity reduction at the cost of a substantial performance loss. In order to further reduce the complexity and provide good directional measurement results, the rapid power iterative polynomial rooting (RPI-PR) method is proposed, which utilizes the noise subspace combined with the polynomial solution method to obtain the optimal direction estimation. In addition, the influence of initial vector selection on convergence in the power iteration is analyzed, especially when the initial vector is orthogonal to the incident wave. Simulation results show that the two proposed methods outperform the conventional DOA estimation methods in terms of computational complexity. In particular, the RPI-PR method achieves more than two orders of magnitude lower complexity than conventional methods and achieves performance close to the Cramér–Rao Lower Bound (CRLB). Moreover, it is verified that the initial vector and the relative error have a significant impact on the performance with respect to the computational complexity.

Different from conventional reconfigurable intelligent surfaces (RIS), simultaneous transmitting and reflecting RIS (STAR-RIS) can reflect and transmit signals to the receiver. In this paper, to serve more ground users and increase deployment flexibility, we investigate an unmanned aerial vehicle (UAV) equipped with STAR-RIS (STAR-RIS-UAV)-aided wireless communications for multi-user networks. Energy splitting (ES) and mode switching (MS) protocols are considered to control the reflection and transmission coefficients of STAR-RIS elements. To maximize the sum rate of the STAR-RIS-UAV-aided coordinated multipoint (CoMP) cellular system for multi-user networks, the corresponding beamforming vectors as well as transmitted and reflected coefficient matrices are optimized. Specifically, instead of adopting the alternating optimization, we design an iteration method to optimize all variables for both the ES and MS protocols at the same time. Simulation results reveal that the STAR-RIS-UAV-aided CoMP system has a much higher sum rate than systems with conventional RIS or without RIS. Furthermore, the proposed structure is more flexible than fixed STAR-RIS and could greatly promote the sum rate.

Due to the power consumption and high circuit cost in antenna arrays, the practical application of massive multiple-input multiple-output (MIMO) in the sixth generation (6G) and future wireless networks is still challenging. Employing low-resolution analog-to-digital converters (ADCs) and hybrid analog and digital (HAD) structure is two low-cost choices with acceptable performance loss. In this paper, the combination of the mixed-ADC architecture and HAD structure employed at receiver is proposed for direction of arrival (DOA) estimation, which will be applied to the beamforming tracking and alignment in 6G. By adopting the additive quantization noise model, the exact closed-form expression of the Cramér-Rao lower bound (CRLB) for the HAD architecture with mixed-ADCs is derived. Moreover, the closed-form expression of the performance loss factor is derived as a benchmark. In addition, to take power consumption into account, energy efficiency is also investigated in our paper. The numerical results reveal that the HAD structure with mixed-ADCs can significantly reduce the power consumption and hardware cost. Furthermore, that architecture is able to achieve a better trade-off between the performance loss and the power consumption. Finally, adopting 2-4 bits of resolution may be a good choice in practical massive MIMO systems.

Vehicle location information obtained through the global navigation satellite system (GNSS) will play a pivotal role in emerging vehicular networks. This vital information is, however, susceptible to a host of unwanted manipulations, especially if a malicious entity is involved. The most obvious example of such manipulations is the forwarding by a malicious vehicle of false GNSS locations to other members of the network. Such events can lead to poor operational outcomes for the vehicular network, and in extreme cases even lead to catastrophic safety violations. Here, we highlight research efforts pursued in the past few years that have attempted to address this weakness in vehicular networks. We also discuss the importance of location verification in the wake of emerging wireless technologies, such as those being proposed for beyond 5G (B5G) wireless vehicular networks. In particular, we detail an opportunity to conduct location reporting and verification simultaneously with the aid of mmWave technology and discuss how emerging machine learning (ML) techniques will provide for location verification solutions where reliability levels will be commensurate with that required by the vehicular network paradigm. We close by discussing the potential enhancements for location verification within a future combined B5G-ML architecture.