Search

Biomass materials play a key role in the renewable energy market as they can serve as a suitable alternative to fossil fuels. However, the quality of the material entering bioenergy plants is often a cause of technical concern. Biomass quality assessment is crucial not only for energy characterization but also for environmental and operational aspects. The goal of this study is to characterize and classify the biomasses used by Italian power plants with reference to the quality classes stated by the ISO standard 17225:2021. A further objective is to verify the ability of the standard to classify heterogeneous and specific biomasses. In this study, more than 900 biomass samples were analyzed. The samples were collected from several Italian power plants with >5 MWe between 2010 and 2020, and the most important physical and chemical parameters were analyzed according to the international standards of reference. The results of the analyses were collected in a large dataset used for subsequent statistical analyses. Statistical analyses applied are Principal Component Analysis and Pearson correlation maps, which showed that the ash content is a fundamental and ideal parameter to assess the biomass quality. Results obtained demonstrate that herbaceous biomasses are of low quality mainly due to the high ash content; a relatively low ash content was found for woody biomasses. [ABSTRACT FROM AUTHOR]

Quality is a crucial issue for the energy use of residual biomass, especially for agricultural biomass [[20]]. The authors highlighted that local sourcing of biomass materials with an efficient logistics system presents environmental benefits and significant economic advantages regarding various logistical aspects of biomass transport and energy distribution. All the published papers deal with aspects connected with the SI's theme, such as residual biomass quality, sustainability assessment of solid biofuel production, and bioenergy sustainability assessment. Ilari et al. [[45]] analytically defined the quality of residual woody biomass produced in marginal areas and the solid biofuels obtained from that biomass material. [Extracted from the article]

Phasing out fossil fuels to renewables is currently a global priority due to the climate change threat. Advocacy for biomass use as an energy source requires assessing the quality biomass and ecological impacts of bioenergy supply chains. This study evaluated the quality of biomass residues from orchards and silviculture transported from different Northern and Central Italy locations and the carbon footprint of a biomass power plant. The total greenhouse emissions were calculated based on primary data for 2017 according to the ISO/TS 14067. All the residue samples showed their suitability for biofuel use. Ash content was relatively low on average (3–5% d.m.), except for grapevine residues (18% d.m.). The lower heating value was within the expected range of 15–21 MJ kg−1 for plant species. The average GHG emission from the power plant was 17.4 g CO2 eq./MJ of electrical energy, with the energy conversion (38%) and transportation of biomass (34%) phases being the main impact contributors. For this study, impacts of residual agricultural residue were about half that of residues from forest management, mainly due to chipping and greater transport distance. Results show that sourcing residual biomass materials for electricity generation close to power plants significantly reduce GHG emissions compared to conventional fossil fuels. [ABSTRACT FROM AUTHOR]

Replacing fossil energy sources with renewable energy sources is a key strategic action to limit environmental issues. To achieve this goal, substitution with biomass is beneficial due to its versatility in various fields. In terms of circular economy and sustainability, the possibility of energy exploitation of residual biomass is particularly desirable in small-medium enterprises. The use of supply chain by-products can improve sustainability and create opportunities for companies. The purpose of this study is to evaluate the suitability of residual biomass of conifers and broad-leaved trees to produce quality pellets using an agri-pellet machine activated by the power take-off of a tractor. This system can be employed at the farm level. Wood biomass of four species was tested; poplar, stone pine, black locust, and oak. Wood chips samples were analyzed to determine their qualitative characteristics following the technical standard ISO 17225-4. Based on the results, different wood blends were created to produce pellets, subsequently characterized according to ISO 17225-2. The analyses carried out on wood chips and pellets were bulk density, moisture, ash content, calorific value, elemental composition, chlorine, sulfur, and heavy metals. In addition, particles size was measured only for wood chips, while the length, diameter, mechanical durability, and ash melting behaviors were determined only for pellets. Some of the analyzed mixtures show acceptable values according to the current ISO technical standards. The values related to the apparent pellet bulk density and the durability test highlight that not all the mixtures are suitable to produce quality pellets. Results also represent a good starting point for future studies. [ABSTRACT FROM AUTHOR]

In the latex production chain, rubber tree seeds (Hevea brasiliensis) represent an underutilized fraction with high potentialities, which can increase the sustainability of the whole process if rightly valorized. In the present study, the quality of all the fractions obtained from the rubber fruit were evaluated, with the aim to identify possible applications for their valorization with a circular economy perspective. Seeds from five different varieties of rubber tree were analyzed. Furthermore, a whole mass and energy balance was defined, which has allowed us to define hypothetical production scenarios. The obtained results show negligible differences among varieties. Shells and capsules have shown a composition similar to woody biomass, with high heating values (more than 16.5 MJ kg−1), low nitrogen content (below 0.5% on weight basis (w/w)) and reduced ash content (0.51% w/w and 1.90% w/w, respectively). Kernels were chemically extracted comparing two different solvents: n-hexane and ethanol. Both solvents showed similar extraction yields, i.e., 49% w/w and 46% w/w for n-hexane and ethanol, respectively. The resulting extraction flour was characterized by a high protein content (around 40% w/w) making it suitable for animal feeding. The rubber seed oil could be used in blends of different vegetable oils for biodiesel production. All this information is useful for improving the sustainability of the latex production chain and to assess the sustainability of possible bioenergy value chains. [ABSTRACT FROM AUTHOR]

The impact of heat production from vineyard pruning pellets has been evaluated in this paper. The study considers two different systems: the first one based on a mobile pelletizer (PS1) and the second one based on a stationary pellet plant (PS2). The analysis conducted is from "cradle to grave"; the systems under analysis includes pruning harvesting, transport to storage area, pelletization (mobile system or stationary production plant), transport to consumer and combustion. The functional unit selected is 1 MJ of thermal energy produced. The impact assessment calculation methods selected are Eco-Indicator 99 (H) LCA Food V2.103/Europe EI 99 H/A with a midpoint and endpoint approach, and ReCiPe Midpoint (H) V1.10. Considering Life Cycle Assessment results, Eco-indicator shows a total impact of 4.25 and 4.07 mPt for mobile pelletizer and stationary pellet plant, respectively. Considering the three damage categories, PS1 has values of 2.4% (Human Health), 3.8% (Ecosystem Quality) and 17.3% (Resources), more impactful than PS2. Contribution analysis shows that direct emissions are the major damage contributor, followed by wood ash management. From a comparison between the baseline scenario and a scenario with an avoided product (wood ash as a standard potassium fertilizer), PS1 and PS2 with an avoided product approach are 41% and 40% less impactful than in the baseline scenarios. When testing the impact of mobile pelletizer while considering transportation as a factor, a reduction of distance for pellet has been evaluated. Reducing the distance from 100 to 10 km, the total impact of PS1 almost reaches the impact of PS2 with a difference of around 4.6% (Eco-indicator 99 method). The most impactful processes are pellet production, direct emissions and ash management, while a less impactful factor is the electricity consumption. Transportation shows the lowest impact. Considering the ReCiPe impact calculation method with a midpoint approach, the results confirm what was found with Eco-indicator 99; the PS1 shows a slightly higher impact than PS2. [ABSTRACT FROM AUTHOR]