Search

This paper describes the design and operation of the Falcon ion source. It is based on conventional design of anode layer thrusters. This ion source is a versatile, compact, affordable, and highly functional in the research field of the fusion materials. The reversed magnetic field configuration of the source allows precise focusing of the ion beam into small spot of ≈3 mm and also provides the limited capabilities for impurity mass-separation. As the result, the source generates steady-state ion beam, which irradiates surface with high heat (0.3 - 21 MW m-2) and particle fluxes (4 × 1021 - 3 × 1023 m-2s-1), which approaches the upper limit for the flux range expected in ITER. [ABSTRACT FROM AUTHOR]

Current free double layers (CFDLs) are localized potential structures having spatial dimensions - Debye lengths and potential drops of more than local electron temperature across them. CFDLs do not need a current for them to be sustained and hence they differ from the current driven double layers. Helicon antenna produced plasmas in an expanded chamber along with an expanding magnetic field have shown the existence of CFDL near the expansion region. A helicon plasma device has been designed, fabricated, and installed in the Institute for Plasma Research, India to study the role of maximum magnetic field gradient as well as its location with respect to the geometrical expansion region of the chamber in CFDL formation. The special feature of this machine consisting of two chambers of different radii is its capability of producing different magnetic field gradients near the physical boundary between the two chambers either by changing current in one particular coil in the direction opposite to that in other coils and/or by varying the position of this particular coil. Although, the machine is primarily designed for CFDL experiments, it is also capable of carrying out many basic plasma physics experiments such as wave propagation, wave coupling, and plasma instabilities in a varying magnetic field topology. In this paper, we will present the details of the machine construction, its specialties, and some preliminary results about the production and characterization of helicon plasma in this machine. [ABSTRACT FROM AUTHOR]

Experimental investigation of reconnection in magnetized plasmas relies on accurate characterization of the evolving magnetic fields. In experimental configurations where the plasma dynamics are reproducible, magnetic data can be collected in multiple discharges and combined to provide spatially resolved profiles of the plasma dynamics. However, in experiments on spontaneous magnetic reconnection recently undertaken at the Versatile Toroidal Facility at MIT, the reconnection process is not reproducible and all information on the plasma must be collected in a single discharge. This paper describes a newly developed magnetic flux array which directly measures the toroidal component of the magnetic vector potential, A[lowercase_phi_synonym]. From the measured A[lowercase_phi_synonym], the magnetic field geometry, current density, and reconnection rate are readily obtained, facilitating studies of the three-dimensional dynamics of spontaneous magnetic reconnection. The novel design of the probe array allows for accurate characterization of profiles of A[lowercase_phi_synonym] at multiple toroidal angles using a relatively small number of signal channels and with minimal disturbance of the plasma. [ABSTRACT FROM AUTHOR]

A magnetic field mapping technique via heavy ion beam trajectory imaging is being developed on the Madison Symmetric Torus reversed field pinch. This paper describes the computational tools created to model camera images of the light emitted from a simulated ion beam, reconstruct a three-dimensional trajectory, and estimate the accuracy of the reconstruction. First, a computer model is used to create images of the torus interior from any candidate camera location. It is used to explore the visual field of the camera and thus to guide camera parameters and placement. Second, it is shown that a three-dimensional ion beam trajectory can be recovered from a pair of perspectively projected trajectory images. The reconstruction considers effects due to finite beam size, nonuniform beam current density, and image background noise. Third, it is demonstrated that the trajectory reconstructed from camera images can help compute magnetic field profiles, and might be used as an additional constraint to an equilibrium reconstruction code, such as MSTFit. [ABSTRACT FROM AUTHOR]

The motional Stark effect with laser-induced fluorescence (MSE-LIF) diagnostic is presently under development as a new technique for measuring magnetic field pitch angle and magnitude in plasmas in a wide range of conditions. The technique is based on the observation of LIF from the set of H-alpha transitions in a diagnostic hydrogen neutral beam. As the beam passes at a high velocity through a background magnetic field, the H-alpha emission is split and polarized in a way that is dependent on the magnetic field. The magnitude can be determined from the line splitting and the direction from the polarization orientation. This paper will describe the principle of the technique and report on the present status, including the successful measurement and interpretation of an LIF enhancement phenomenon. The LIF signal from a 30 kV beam in a background of neutral gas was found to be enhanced, and the fine-structure line amplitudes were seen to vary significantly with an applied perpendicular magnetic field of 0–0.01 T. MSE-LIF for plasmas in the intermediate field range of greater than 0.1 T, and potential advantages of MSE-LIF will also be covered. [ABSTRACT FROM AUTHOR]

High voltage pulses of very short duration and fast rise time are required for generating uniform and diffuse plasma under various operating conditions. Dielectric Barrier Discharge (DBD) has been generated by high voltage pulses of short duration and fast rise time to produce diffuse plasma in the discharge gap. The high voltage pulse power generators have been chosen according to the requirement for the DBD applications. In this paper, a compact solid-state unipolar pulse generator has been constructed for characterization of DBD plasma. This pulsar is designed to provide repetitive pulses of 315 ns pulse width, pulse amplitude up to 5 kV, and frequency variation up to 10 kHz. The amplitude of the output pulse depends on the dc input voltage. The output frequency has been varied by changing the trigger pulse frequency. The pulsar is capable of generating pulses of positive or negative polarity by changing the polarity of pulse transformer’s secondary. Uniform and stable homogeneous dielectric barrier discharge plasma has been produced successfully in a xenon DBD tube at 400-mbar pressure using the developed high voltage pulse generator. [ABSTRACT FROM AUTHOR]

Most electron cyclotron resonance ion sources use hexapolar magnetic fields for the radial confinement of the plasma. The geometry of this magnetic structure is then-induced by charged particles-mapped onto the inner side of the plasma electrode via sputtering and deposition. The resulting structures usually show two different patterns: a sharp triangular one in the central region which in some cases is even sputtered deep into the material (referred to as thin groove or sharp structure), and a blurred but still triangular-like one in the surroundings (referred to as broad halo). Therefore, both patterns seem to have different sources. To investigate their origins we replaced the standard plasma electrode by a custom-built plasma electrode acting as a planar, multi-segment current-detector. For different biased disc voltages, detector positions, and source biases (referred to the detector) we measured the electrical current density distributions in the plane of the plasma electrode. The results show a strong and sharply confined electron population with triangular shape surrounded by less intense and spatially less confined ions. Observed sputter- and deposition marks are related to the analysis of the results. Our measurements suggest that the two different patterns (thin and broad) indeed originate from different particle populations. The thin structures seem to be caused by the hot electron population while the broad marks seem to stem from the medium to highly charged ions. In this paper we present our measurements together with theoretical considerations and substantiate the conclusions drawn above. The validity of these results is also discussed. [ABSTRACT FROM AUTHOR]