Search

The full-size ITER ion source prototype SPIDER (Source for the Production of Ions of Deuterium Extracted from a Radio frequency plasma) has recently started beam operation, whose objective is to produce 100 keV, 60 A hydrogen negative ions for 1 h. The source is presently operated in the volume regime, and the beam power is consequently limited. In such a configuration, the high resolution calorimeter STRIKE (Short-Time Retractable Instrumented Kalorimeter Experiment), even though uncooled, may be used instead of the SPIDER beam dump without limiting the beam-on time. STRIKE is formed by unidirectional carbon fiber-carbon matrix (CFC) composite tiles that are exposed to the beam while their temperature is recorded by using two infra-red cameras. This setup, thanks to the moderate broadening of the temperature profile guaranteed by the anisotropy of CFC, allows for the determination of detailed features of the beam current distribution (spatial resolution is about 2 mm). Furthermore, positively biasing the CFC tiles permits a direct electrical measurement of the negative ion beam current. Besides the total beam current and beam uniformity, which can be retrieved both by calorimetry and electrical measurement, beamlet divergence and deflection can be determined by infra-red thermography. This contribution describes the characterization of the SPIDER negative ion beam as a function of the source and accelerator parameters by means of the diagnostic calorimeter STRIKE in the volume regime.

To study and optimise negative ion production for the ITER neutral beam injectors, a test facility is under construction in Padova with the aim of testing beam characteristics and to verify the source proper operation. The instrumented calorimeter STRIKE (short-time retractable instrumented kalorimeter experiment) is being developed to characterise the SPIDER (Source for Production of Ion of Deuterium Extracted from RF plasma) beam during short operations. The paper presents an investigation of the response of STRIKE measurement systems. It results that biasing is necessary to cope with the influence of secondary electrons on current measurements; moreover, despite the discretisation of the recorded thermal patterns introduced by the pixels of thermal cameras, a sufficient spatial resolution is expected.

In the development of the neutral beam injector for ITER experiment, the test facility SPIDER is going to be built. To measure the beam parameters, several diagnostics are used. One of them is the Short-Time Retractable Instrumented Kalorimeter Experiment (STRIKE) which measures beam uniformity, beamlet divergence, and stripping losses. This contribution gives an overview of the diagnostics dedicated to these measurements: thermal cameras, thermocouples, current sensors, and electrostatic sensors. The specifications of these diagnostics have been defined according to the results of electrostatic and thermal simulations. A failure modes and effects analysis has been performed during the design. Consequently the project of the STRIKE diagnostics has been optimized to reduce the possible failure risks.