Search

A real-time processing system for the two-color CO2 laser interferometer on the JT-60SA has been developed for density feedback control. The system has a novel feature that can detect fringe jumps due to off-normal events, such as loss detection due to displacement of the beam axis and changes in the laser wavelengths. Because a phase change due to the JT-60SA plasma is smaller than π/2, corresponding to the line-integral electron density NL of ∼ 6 × 1 0 19 m−2 in a short interval of 500 ns, the threshold of the fringe jump detection is decided to be π/2. Hence, off-normal events can be detected from a fringe jump, leading to the abort of the real-time feedback control. In the density feedback control of the JT-60SA plasma, the system is employed as a density monitor, with NL being successfully controlled at 16.8% ± 6.6% lower than the reference. [ABSTRACT FROM AUTHOR]

Magnification of a polarization angle with Littrow layout gratings has been developed. High magnification with a factor of 7.7 using two gratings in Littrow layout was experimentally proved. The magnification range was investigated by calculation at a wavelength of 10.6 µm. The method can be applied for a high magnification factor >30. Larger groove numbers and smaller blaze angles are suitable for the large magnification. Statistical fluctuation of the diffracted polarization angle is compared with that of the incident polarization angle. [ABSTRACT FROM AUTHOR]

A real-time processing system for the two-color CO2 laser interferometer on the JT-60SA has been developed for density feedback control. The system has a novel feature that can detect fringe jumps due to off-normal events, such as loss detection due to displacement of the beam axis and changes in the laser wavelengths. Because a phase change due to the JT-60SA plasma is smaller than π/2, corresponding to the line-integral electron density NL of ∼6×1019 m-2 in a short interval of 500 ns, the threshold of the fringe jump detection is decided to be π/2. Hence, off-normal events can be detected from a fringe jump, leading to the abort of the real-time feedback control. In the density feedback control of the JT-60SA plasma, the system is employed as a density monitor, with NL being successfully controlled at 16.8% ± 6.6% lower than the reference., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

A thermal image plate (TIP) using ceramic luminescence materials has been developed in order to visualize a beam spot of a CO 2 laser which is used as a light source of an interferometer developed in JT-60SA. By using CaAlSiN 3 :Eu 2+ (CASN), the TIP was developed, and its property was assessed. A CASN TIP was able to visualize the invisible CO 2 laser beam as a negative image. The beam diameter and the stability of the beam axis measurement obtained with the CASN TIP were approximately the same as that obtained with a commercial TIP. Furthermore, the time response of the CASN TIP at the best was approximately the same as that of the commercial TIP. The CASN TIP which had the highest time response was applied to the beam axis stabilizer, and then the beam axis stabilization was successfully performed in 2 h.

A new method of plasma electron density measurement using interferometric phases (fractional fringes) of an optical frequency comb interferometer is proposed. Using the characteristics of the optical frequency comb laser, high density measurement can be achieved without fringe counting errors. Simulations show that the short wavelength and wide wavelength range of the laser source and low noise in interferometric phases measurements are effective to reduce ambiguity of measured density.