Search

To improve the portability of magnets in gyrotron devices, we designed a compact Bitter-type magnet with power consumption optimization theory. This magnet operates at room temperature in a small volume. The theory revises existing electromagnetic theory for non-uniform structural Bitter-type magnets and achieves the lowest energy consumption through iterative optimization. To extend the magnetic field homogeneity region, the ferromagnetic material armature is applied to the Bitter-type system without additional power consumption. Unlike previous manual designs, the proposed Bitter-type magnets can obtain optimal parameters with a significant reduction in computing time. Through the introduction of correction factors, we improve accuracy through multiple verifications of simulations and experiments. On this basis, a room-temperature Bitter-type magnet system for Ka-band fundamental mode gyrotron amplifiers is designed. Its maximum magnetic field strength is 1.1 T, and the length of the homogeneity region is 300 mm. Through optimization, its energy consumption is only 27.5 kW. [ABSTRACT FROM AUTHOR]

A generic approach to excite TE n0 (n ≥ 1) modes in a rectangular waveguide for confocal gyro-devices is proposed. The exciter consists of a 3 dB H-plane power divider (n ≥ 3) and a mode-converting section. The injection power is split into two in-phase signals with equal amplitudes which simultaneously excite the secondary waveguide via two sets of multiple slots. Both the position and width of the slot are symmetrically distributed with respect to the center line for each set of slots. The slot width complies with a geometry sequence, with adjacent slots being spaced a quarter wavelength apart to cancel the backward wave out. A TE 40 mode exciter at 100 GHz is numerically simulated and optimized, achieving a 1 dB and a 3 dB transmission bandwidth of 18.2 and 21 GHz, respectively. The prototype is fabricated and measured. The cold test is carried out utilizing two identical back-to-back connected mode exciters, and the measured performances are in good agreement with the numerical simulation results when taking into account the wall loss and assembly tolerance.