Search

For low-carbon sustainability, recycled rubber particles (RPs) and recycled aggregate (RA) could be used to make rubber-modified recycled aggregate concrete (RRAC). The characteristics (compressive strength and peak strain) of RRAC with various amounts of RA and RPs after heating at various temperatures were studied in this work. The results show that high temperatures significantly decreased the uniaxial compressive strength (UCS), whereas the addition of RA (e.g., 50%) and RPs (e.g., 5%) can mitigate the negative effect caused by high temperatures. The peak strain can also be improved by increasing the replacement ratios of RA and RP. Support vector regression (SVR) models were trained using a total of 120 groups of UCS and peak strain experimental datasets, and an SVR-based multi-objective optimization model was proposed. The excellent correlation coefficients (0.9772 for UCS and 0.9412 for peak strain) found to illustrate the remarkable accuracy of the SVR models. The Pareto fronts of a tri-objective mixture optimization design (UCS, strain, and cost) were successfully generated as the decision reference at varying temperature conditions. A sensitivity analysis was performed to rank the importance of the input variables where temperature was found as the most important one. In addition, the replacement ratio of RA is more important compared with that of the RP for both the UCS and strain datasets. Among the mechanical properties of concrete, compressive strength and peak strain are two key properties. This study provides guidance for the study of RRAC constitutive models under high temperatures.

This work presents the design and application of a low-cycle reciprocating loading test on 23 recycled aggregate concrete-filled steel tube columns and 3 ordinary concrete-filled steel tube columns. Additionally, a systematic study on the influence of various parameters (e.g., slenderness ratio, axial compression ratio, etc.) was conducted on the seismic performance of the specimens. The results show that all the specimens have good hysteresis performance and a similar development trend of skeleton curve. The influence of slenderness ratio on the seismic index of the specimens is more significant than that of the axial compression ratio and the steel pipe wall thickness. Furthermore, artificial intelligence was applied to estimate the influence of parameter variation on the seismic performance of concrete columns. Specifically, Random Forest with hyperparameters tuned by Firefly Algorithm was chosen. The high correlation coefficients (R) and low root mean square error values from the prediction results showed acceptable accuracy. In addition, sensitivity analysis was applied to rank the influence of the aforementioned input variables on the seismic performance of the specimens. The research results can provide experimental reference for the application of steel tube recycled concrete in earthquake areas.