Search

Rainfall with heavy intensity and long duration is a main inducing factor that triggers landslides on anti-inclined rock slopes. Numerous interbedded anti-inclined rock (IAR) slopes in Southwest China frequently experience mountain collapses and landslides under heavy rainfall. Therefore, it is necessary to study the failure mode of IAR slopes during rainfall. In this study, the Linda landslide and Mari landslide, typical IAR landslides in the study area, were used as examples to build a physical model of IAR slopes under continuous rainfall conditions, and a self-made rainfall simulation system was used to mimic natural rainfall conditions. The multi-physics data of displacement, velocity, stress, strain, pore water pressure, and acoustic signals in model deformation and failure under rainfall conditions were obtained using multi-field monitoring technology. In addition, the materials' water content and mechanical parameters at different locations of the model were obtained after the experiment. The analysis results indicate that: in the first and middle periods of rainfall, the slope model experienced a shallow local deformation and a holistic toppling deformation; until the late rain, the failure of the IAR slope caused by rainfall finally presented a typical failure mode of multiple failures and collapses of regressive landslides. According to its multi-field evolution characteristics, the velocity and acoustic signals were highly consistent with the failure characteristics of the model, which could be used as landslide early warning indicators. In addition, it was observed that the shape of the multi-slip surfaces generated by the model was a concave double straight line extending from the slope toe to the slope surface and sharing the failure section at the slope toe. Finally, the deformation and failure process of the model could be speculated to be divided into five stages based on the deformation behavior and multi-field physical data feature: the initial interlayer dislocation stage, the deformation stage, the crack propagation stage, the retrogressive failure stage, and the holistic failure stage. The failure mode and deformation mechanism of IAR slopes under rainfall were revealed in the model test, which could provide appropriate guidance for the analysis and evaluation of similar landslides. Highlights: The failure of the interbedded anti-inclined rock slope model caused by rainfall presented a typical failure mode of multiple failures and collapses of regressive landslides. The velocity and acoustic signals are highly consistent with the failure characteristics of the model, and the shape of the multi-slip surfaces was a concave double straight line extending from the slope toe to the slope surface. According to its multi-field evolution characteristics, the deformation and failure process of the model under rainfall conditions can be divided into five stages. [ABSTRACT FROM AUTHOR]

Block-flexure toppling failures in interbedded anti-inclined rock (IAR) slopes present significant risks to infrastructure and safety. Based on the Linda landslide field investigations, this study conducted a series of physical modelling tests encompassing 15 slope angle and bedding angle combinations. The aim of 15 sets of tests was to explore the deformation and failure mechanisms in IAR slopes. The observations during the deformation and failure stages elucidated how changes in slope and bedding angles influence rock mass deformation and failure characteristics. The findings highlight that slope angle critically impacts IAR slope stability, while bedding angle notably affects deformation depth, failure area, and failure surface configuration. IAR slopes with bedding angles less than 60° tend to exhibit shallow, single-surface failures with the linear failure surface, whereas bedding angles exceeding 70° lead to deep-seated, large-area, multi-surface failures characterised by double-folded failure surfaces. The magnitude of the failure inclination angle increases with slope and bedding angles, ranging from 0 to 35°. Furthermore, deformation and failure in IAR slopes involve the progressive extension of cracks from the slope crest to the interior, eventually reaching the slope toe. Finally, the block-flexure toppling process in IAR slopes can be divided into an incubation deformation stage and an accelerated deformation stage, and based on curve characteristics, different deformation modes of the IAR slopes can be further classified as stepwise cumulative accelerated deformation mode and leap deformation mode. Highlights: Fifteen cases of physical modelling tests covering various slope angles and bedding angles were conducted to replicate the deformation and failure mechanism in interbedded anti-inclined rock (IAR) slopes; Slope angle plays a pivotal role in determining the stability of IAR slopes, whereas bedding angle controls slope deformation depth, failure area, and failure surface characteristics; The IAR landslide is a progressive failure process that extends from the slope crest to the slope toe; The deformation process of IAR slopes can be categorised into the incubation deformation stage and the accelerated deformation stage. Additionally, the deformation mode can be further classified as either stepwise cumulative accelerated or leap deformation modes. [ABSTRACT FROM AUTHOR]

This study investigated a dynamic stability analytical model for bedding rock slope with soil interlayer, considering various rain patterns. The critical rain intensities for anhydrous and water-filled fissure were derived, respectively. Rain coefficients (i.e., concentration and peak position coefficients) were subsequently introduced to investigate rain patterns. The evolving water head under different infiltration scenarios was derived based on Darcy's law and mass conversation law. Additionally, the time-varying water pressure along soil interlayer was obtained based on triangular distribution assumption. An analytical model incorporating time-varying water head was established to predict slope stability based on limit equilibrium method. Numerical simulations further validated the analytical solutions for time-varying water head and pressure. The evolving characteristic of slope stability was analyzed, and a failure threshold was proposed. Results demonstrated that rain patterns and rain coefficients significantly impact on the rainfall threshold corresponding to slope failure. For uniform rain-induced slope failure, rainfall threshold tends to increase as rain intensity decreases. For unimodal rain-induced slope failure, the rainfall threshold is the largest for post-peak rain corresponding to slope failure, followed by the medium-peak rain, and the smallest for forward-peak rain. These results and findings enhance our understanding of the dynamic stability of bedding rock slope with inclined soil interlayer and provide valuable insights into assessing the evolving slope stability under different rain patterns. Highlights: An analytical model of dynamic slope stability coupling time-varying water head was established. Impacts of rain pattern and rainfall intensity on slope stability were systematically investigated. Rainfall threshold for slope failure considering different rain patterns was proposed based on analytical model. 〹 [ABSTRACT FROM AUTHOR]

Recent research has paid little attention to weakening of discontinuities with different joint wall material (DDJM) induced by wetting and drying cycles. Experimental investigations were conducted to examine the effects of wetting–drying cycles on weakening of three typical types of natural planar DDJM collected from a sliding-prone formation in the Three Gorges reservoir region of China. Deterioration of the corresponding four types of discontinuities with identical joint wall material (DIJM) were also been studied for comparison. The weakening laws of DDJM were revealed from macro- and microperspectives by testing on mineral compositions, microstructures and water absorption rate of joint walls as well as shear strength of discontinuities. The results indicate that the repeated wetting–drying cycles lead to obvious changes in microstructure and increases of macro water absorption rate for the studied joint walls with the changing degree closely related to their clay mineral contents; the peak shear strengths of DDJM gradually decreases with the wetting and drying cycles for a certain normal stress with the weakening rate between that of the DIJM with two joint wall materials of the DDJM, while closer to that of DIJM with the weak half materials of the DDJM; significant correlations have been found between the variation coefficient of rock microstructure of joint walls and the macrodeterioration coefficient of DDJM; the changing rates of multi-scale parameters before and after six wetting–drying cycles vary obviously, indicating the weakening is slowed down after six wetting–drying cycles for the studied discontinuities. Highlights: Effects of wetting-drying cycles on weakening discontinuities with different joint wall material were studied. Deterioration of the discontinuities with identical joint wall material were also been investigated for comparison. The weakening laws were revealed from macro and micro perspectives. Significant correlations have been found between the variation coefficient of microstructure of joint walls and the macro deterioration coefficient. The results could provide a basis to better understand the stability evolution of rock slopes with soft and hard rock interbedded. [ABSTRACT FROM AUTHOR]

Due to complex geological structures and strong crustal activity, geological disasters occur frequently in the upper reaches of the Yalong River, Southwest China. Toppling failure on anti-dip rock slopes is a common phenomenon; in particular, after the Wenchuan earthquake in 2008, numerous landslides caused by toppling deformation occurred in reservoir areas, seriously threatening the construction and operation of large-scale water conservancy projects and hydropower projects. Taking three typical toppling slopes in the basin as research objects, the dynamic behaviour, failure evolution, and failure plane location of toppling failure under seismic waves were investigated by shaking table tests and UDEC simulations. The test results indicated that slope angle and stratum dip angle were both inversely proportional to the stability of the slope in the tested ranges. The failure evolution of toppling on anti-dip rock slopes could be divided into four stages: (1) the development stage of tensile cracks in the strata; (2) the formative stage of tensile cracks at the crest of the slope; (3) the formative stage of toppling zones; and (4) the failure stage. Two equations were proposed to reveal the relationships between the surface peak ground acceleration and the horizontal depth of the failure plane and displacement of the slope surface. The propagation and coalescence of discontinuous cross joint in the slope and the entire failure evolution simulated by the UDEC damage model agreed well with the shaking table test results. [ABSTRACT FROM AUTHOR]