Search

Purpose: A computer program was created to train technologists to perform chest X-rays in crying infants at maximum inspiration., Materials and Methods: Videos of 4 children were used. Using a computer program, the moment of deepest inspiration was determined in the video in the single frame view. During the normal running video, 14 technologists (3 with significant experience, 3 with little experience and 8 with very little experience in pediatric radiography) simulated a chest radiograph by pushing a button. The computer program stopped the video and the period of time to the optimal moment for a chest x-ray was calculated. Every technologist simulated 10 chest X-rays in each of the 4 video clips. The technologists then trained themselves to perform chest X-rays at optimal inspiration like playing a computer game. After training, the test was repeated. Changes were evaluated by t-test for unpaired samples (level of significance p < 0.05)., Results: Although the differences improved in all children, minimal deviation from the optimal moment for taking an X-ray at inspiration occurred in the periodically crying child (0.21 sec before and 0.13 sec after training). In a non-periodically crying infant, the largest differences were shown. The values improved significantly from 0.29 sec to 0.22 sec. The group with substantial experience in pediatric radiology improved significantly from 0.22 sec to 0.15 sec. The group with very little experience in pediatric radiology showed worse results (improvement from 0.29 sec to 0.21 sec)., Conclusion: The ability of a technologist to take a chest X-ray at optimal inspiration in a crying child is improved by the tested computer program.

Purpose: To determine the temporal changes of the workflow caused by digitalization of the radiology department after installation of digital luminescence-radiography (DLR), a radiology information system (RIS) and picture archiving and communication system (PACS) at the Missionsärztliche Klinik in April 2000., Materials and Methods: In a comparative study, a workflow analysis by manual registration of different work steps was performed before (1999) and after (2001) digitalization of a radiology department., Results: The digitalization shortened the examination time for patients from a mean of 8 min to 5 min. The time the patient is absent from the emergency room did not change. Reporting radiographic examinations including comparison with previous studies begins earlier from a mean of 2 h 37 min to 17 min. Using PACS, 85.9 % of all cases could be interpreted on the day of the examination (without PACS 41.2 %) and 87.2 % of the reports were completed the day after the examination (without PACS 64.5 %). No time differences were found between reading conventional studies on the monitor or as soft-copy., Conclusion: Compared to conventional film-screen systems, complete digitalization of a radiology department is time saving at nearly all steps of the workflow, with expected positive effects on the workflow quality of the entire hospital.

Purpose: Comparative evaluation of specimens obtained with different MR-compatible biopsy systems and a conventional ferromagnetic system., Methods: Biopsies of a pig liver were performed post-mortem with three different MR-compatible (Somatex; E-Z-EM; Daum) and one conventional biopsy system (Somatex), five with each device. The specimens were measured and the histopathological quality was graded on a scale from 0 (no tissue) to 9 (best). The tip of the needle was examined with an electron microscope before and after biopsy to demonstrate abrasion., Results: The histopathological score between the first and fifth specimen taken with one biopsy device showed no significant difference. The conventional system yielded significantly better results in nearly all categories (p < 0.05) than the MR-compatible biopsy systems. The areas of the specimens obtained with the MR-compatible biopsy systems (4.27-5.99 mm2) were significantly smaller than those from the conventional system (9.98 mm2). The needle tip abrasion of the different biopsy systems determined by electron microscopy showed no substantial difference., Conclusion: Specimens obtained with MR-compatible biopsy systems compared to conventional biopsy systems are of lower histopathological quality. This might be caused by a smaller side notch of the MR-compatible biopsy devices. There was no difference in abrasion of the needle tip due to the softer, non-ferromagnetic alloys.

Purpose: To estimate the accuracy of the determination of tip position of MR compatible biopsy needles based on signal voids and artifacts in MR guided biopsies., Method: In a nylon grid phantom an MR compatible 18G needle (E-Z-EM) was measured in a 1.0 T imager using TSE- and FFE-sequences of 20 s and 40 s duration in 34 different orientations of needle versus B0, frequency and slice selection gradient. 4 radiologists with no experience in the evaluation of signal void artifacts estimated the needle tip positions from needle tip artifacts. The readers determined the needle tip before and after a 15 minute training session based on high resolution images with explanation of size and shape of specific artifacts of biopsy needles in 12 different orthogonal or parallel orientations to B0 and frequency encoding gradient that are possible if the needle lies parallel to the slice, i.e. orthogonal to the slice selection gradient. The values obtained before and after the training session were compared to the real position of the needle tip., Results: Mean distance of actual needle tip and tip position as determined from images was 1.8 +/- 2.3 mm in TSE-versus 2.5 +/- 1.2 mm in FFE-images, with the needle length overestimated. After a 15 minute training session the positioning error decreased significantly to 0.2 +/- 1.8 mm for TSE-sequences and to 1.0 +/- 1.8 mm for FFE-sequences. A higher accuracy of tip localization was obtained with TSE sequences., Conclusion: In MR guided biopsies using FFE- and TSE-sequences the needle position can be more accurately determined if the reader is familiar with the 12 orthogonal or parallel positions of the needle with respect to B0 and frequency encoding gradient and the corresponding artifacts.

Purpose: Small suspicious breast lesions that are only visible at MR imaging were preoperatively marked with a hook wire under MR-guidance to allow the removal of the lesion with tissue-sparing surgery., Method: In all patients the suspicious lesions were marked preoperatively under MR guidance with a hook wire using a commercially available stereotactic device. Interventions were performed with MR guidance on a 1.0 T and on a 1.5 T system., Results: In 19 patients 22 lesions were localized. One lesion was missed and removed in a second procedure. The mean duration for localization was 66 +/- 20 min (range 38-119 min). In two patients two lesions were localized. The mean deviation of the wire tip to the lesion was 2.0 +/- 2.6 mm. In this series, 6 of 22 lesions were malignant. The mean diameter of the lesion was 7.6 +/- 2.6 mm (range 3-14 mm)., Conclusion: Suspicious breast lesions detectable only in MR imaging can be accurately localized with a hook wire preoperatively under MR control to remove the lesion with a tissue-saving surgery.

Purpose: Localization of non-palpable suspicious breast lesions with tumor localization wires is commonly used before surgical excision. Dislocation of the wire is possible. The possibility of dislocation for different types of tumor localization wires was examined experimentally., Methods: 22 different tumor localization wires were inserted into the subcutaneous fat-tissue of a pig. The wire tip was recorded under fluoroscopy. Traction was applied to the wire using a spring-balance. The artifact size of MR-compatible wires was examined in a 1.0 Tesla MR imager., Results: The localization wires with an X-configuration and long hook could not be dislocated by a force up to the maximum of 12 Newton. The retractable localization wires were easily dislocated at traction forces of 1 Newton. Other wires with only one hook could withstand a traction from 2 up to 7 Newton. The wires with a Z-configuration and wires with short hooks showed a highly variable rate of resistance. The artifact size of localization systems was between 10.1 and 11.0 mm for gradient-echo sequences and between 6.7 and 7.1 mm for spin-echo sequences., Conclusion: Tumor localization wires with an X-configuration and long hooks were best anchored in the tissue. The advantage of repositioning retractable wires is confined by the high risk of accidental dislocation. No reliable fixation in the tissue could be achieved using wires with a Z-configuration and wires with short hooks. MR-compatible wires were comparable to non-MR-compatible wires concerning the rate of resistance. The size of the artifacts of MR-compatible systems showed no relevant differences.

Aim: To review the complications of CT guided lumbar sympathicolysis (CTLS) on the basis of our own experience and the available literature., Methods: 241 CTLS were performed by a standard technique according to Haaga's method. Clinical follow-up revealed 4 serious complications; these were analysed and compared with published cases., Results: Amongst our patients there were three fibrotic ureter stenoses and one retroperitoneal abscess. Analysis of the serious complications described in the literature indicates that introduction of CT guided lumbar sympathicolysis has reduced the severity and frequency of complications as compared with surgical and "blind" procedures. With CTLS, no deaths due to the procedure have been reported in the literature. The results indicate that damage to the ureters can be caused by substances used for the neurolysis., Conclusion: Provided certain safeguards are obeyed, CTLS is a very save treatment. However damage to the ureter may follow even when the procedure was technically satisfactory. Therefore, sonographic control of the kidneys after three months is recommended.

Purpose: To control the position of a puncture needle on an access route, which is not parallel to the CT-scan, using control scans not showing start and target points., Methods: A software tool has been developed. After CT for biopsy planning x/y coordinates and table position of start and target points have to be determined on CT-scans. The software calculates x/y coordinates of the access route for every table position, which must be marked interactively on control scans. The accuracy of the programme was proven experimentally and the method was used in five patients., Results: There was no difference between the calculated and measured access route in the experiment. Four of five patients were punctured successfully using our method., Conclusion: Our method is a promising procedure to control a CT-guided caudo-cranial biopsy access route.

Purpose: To evaluate accuracy of needle localisation using and signal enhancement on a 1.OT MR imager for various needles for MR-guided biopsy., Methods: The differences between actual and virtual needle position of needles with different orientations were evaluated in a phantom for spin-echo including turbo-spin-echo sequences., Results: Artifacts depended on the orientation of the needle relative to the field B0, frequency-encoding gradients (Gf) and slice orientation. This resulted in different artifact shapes and sizes for left or right and cranial or caudal biopsy access routes. Applying turbo spin echo sequences feasible for biopsy, the signal void of a 18 G needle (Cook) parallel to Gf reached between 0.3 and. 4.6 mm further into the medium than the real needle tip, depending on needle orientation relative to B0. The diameter of the signal void around the needle varied, the needle shaft was right in the centre of the signal void. With Gf orthogonal to the needle the offset of signal void to needle tip ranged from 2.7 to 3.3 mm, while the actual position of the needle shaft was up to 3.3 mm lateral of the signal void center. While nominal echo times did not influence the size of the artifact in turbo-spin-echo sequences, the artifacts increased with smaller matrix and larger water-fat shift. Material and mass of the needle determined the size of the artifacts as well., Conclusion: Localisation accuracy of the needle can be optimised by choosing optimal gradient directions depending on whether needle tip or shaft position should be displayed.

Conventional screen-film radiographs were compared with storage phosphorus images concerning diagnostic performance in traumatologic radiography. We used an image pool of 106 radiographs including 50 conventionally and 56 digitally recorded images. The images were reviewed by four experienced radiologists. Detectability of fractures was coded in a five-point scale of confidence and analysed by ROC statistics. Furthermore the image quality and the optical density was compared. Digital images are superior under difficult exposure conditions and offer advantages by additional image processing and documentation. For some indications (follow-up, functional examination), reduced x-ray exposure is tolerable. The detectability of subtle lesions, which is essential for the primary diagnosis of fractures was significantly better by conventional radiography.

To demonstrate the detailed vascular architecture of the skin, barium sulphate suspension was injected into the arteries of nine amputated lower limbs. Sections of skin from the foot were fixed in formalin and embedded in paraffin and then examined by high resolution radiography. Subsequently histological sections were prepared and correlated with the micro-angiographic appearances. This technique provided demonstration of the detailed vascular structure of the skin with very little super imposition. The capillary loops in the papillae, the sub-papillary plexus, the glandular components (with the capillaries surrounding the sweat glands), the fine arteries and smallest veins in the cutis could be demonstrated over a prolonged course. Microangiographic and histologic sections were carried out in parallel. These eliminated artifacts and clarified the micro-angiographic appearances. The value of microangiography for demonstrating the vascularity of the skin under normal, pathological and experimental conditions is the subject of further studies.

37 cases of skull fractures with involvement of the orbit were reviewed retrospectively. The value of plain films, tomography and computed tomography was analysed. Combined use of 28 degrees Caldwell and water views revealed 96% of all orbital floor fractures. Orbital emphysema in facial bone fractures nearly almost (in 14 of 15 cases) indicated involvement of the medial orbital wall. CT--performed on a biplane basis--showed best diagnostic accuracy in evaluating orbital fractures. Axial CT scans revealed only 70% of all orbital floor fractures. Because of that coronal scans are especially necessary for evaluating the orbital floor and the orbital roof. CT is necessary for evaluating the medial orbital wall since conventional radiology only shows 15% of all medial orbital wall fractures.