Search

Exploring non-platinum group metal (n-PGM) based efficient oxygen reduction reaction (ORR) electro-catalysts is highly important for realizing advancement in sustainable next generation-alkaline anion exchange membrane fuel cells (AAEMFCs). Herein, we demonstrate a new “hierarchical shape tuning approach” for the synthesis of controlled sized and shaped non-PGM based Ag ORR electro-catalysts with surface active nano-islands. Hierarchical shapes ranging from spherical (S-AgNs), worm-in-sphere, sphere-in-worm and vermiform (worm-like) Ag nanostructures (V-AgNs) were obtained by precisely varying the ratios of capping agent to dual reducing agents in water at ambient conditions. Compared to S-AgNs, V-AgNs revealed a higher mass normalized ORR Tafel activity (0.303 A mgAg−1 at 0.9 V), onset (1.06 V) and half wave (0.78 V) potentials and higher retention of limiting current density (>88%) after 5000 cycles in 0.5 M potassium hydroxide (KOH) solution attributable to their unique worm like morphology with surface active nano-islands and support free-nature enabled better catalyst utilization. In a fully “non-PGM AAEMFC” (n-PAAEMFC), V-AgNs exhibited the highest fuel cell activity of 115.6 mW cm−2 and stable short-term durability (∼240 h) compared to S-AgNs (41.3 mW cm−2) and previously reported fully n-PAAEMFCs indicating their potential use in next-generation alkaline fuel cells.

Recently there has been a considerable focus on the synthesis of nitrogen functionalized graphene for energy storage and conversion. Herein, we report a simple, economical and facile process for the synthesis of nitrogen containing graphene composite which can be scaled up for mass production by using a nitrogen containing organic compound, ethylenediaminetetraacetic acid (EDTA) and graphene oxide as precursors. From the XRD studies, the increase in the interlayer distance between the graphene sheets confirms the functionalization of graphene sheets and the FT-IR spectroscopic analysis revealed the presence of N-containing functional groups in N-doped graphene sheets. XPS analysis confirms the chemical nature of N-containing functional groups, and TG analysis showed the amount of EDTA loaded on the graphene sheets. This composite exhibits a large specific capacitance of 290 F g−1 at 0.1 A g−1 with a capacitance retention of 67% and 58% at high current densities of 10 and 20 A g−1, respectively, thereby showing superior rate capability. In addition, it showed long-term electrochemical stability through 6000 charge–discharge cycles even at a high current density of 5 A g−1 with a specific capacitance loss of 2%.

Bulk-synthesized silicon carbide, hitherto considered inactive for electrochemical lithium insertion, is demonstrated as a potential high-capacity, long-cycling anode material for lithium-ion batteries. In this study, we show that cubic (3C polytype) nano SiC, prepared by a chemical vapour deposition (CVD) method, delivers a reversible lithium insertion capacity of about 1200 mA h g−1 over 200 cycles.