Search

In this paper, to improve the mechanical behavior of DeepCwind semi-submersible floating offshore wind turbine (FOWT) platform mooring lines, the nonlinear catenary cables of the platform were divided into multi-segment and intermediate buoys. Mathematical formulations of the boundary element method (BEM) governing the dynamics of mooring line systems with buoy devices were described. This study was applied to the OC4-DeepCwind semi-submersible FOWT platform, which is designed for a 200-meter water depth with mooring lines consisting of three catenary steel chain cables at 120° angles to each other. The dynamic response of the multi-segment catenary mooring lines with different buoy radiuses and different positions along the cables was investigated. The full-scale platform was modeled in ANSYS-AQWA software, and the simulations were performed under harsh offshore conditions. The mooring line's general arrangement, tension, strain and uplift force for different buoy radiuses and their position along the cable are presented and discussed. Moreover, platform motions in three directions (surge, heave, and pitch) were also analyzed. It was concluded that by correctly selecting the buoy volume and position along the cable, the tension of the cable may be reduced by up to 45%. By incorrectly selecting the buoy, the results caused adverse effects. [ABSTRACT FROM AUTHOR]

In this paper, the second-order hydrodynamic force on fixed and floating tandem cylinders has been calculated and different parameters have been taken into consideration. An incident wave is diffracted by the fixed cylinder, and as a result low-frequency waves radiate toward the floating cylinder and cause low-frequency second-order hydrodynamic forces to act on the surface of the floating cylinder. The interactions between the fixed and floating cylinders have been investigated by changing the distance between them, as well as the draft and radius of the floating cylinder. By employing perturbation series analysis over the wetted surface, the second-order wave excitation force has been calculated. The maximum force applied on the floating cylinder becomes non-dimensional when considering it with and without the fixed cylinder. The results showed the effect that the existence of the fixed cylinder had on the increase in the second-order forces is quite evident where, for a significant parameter of the floating cylinder, the force in the heave direction was enhanced by up to 1.55 times. [ABSTRACT FROM AUTHOR]