Search

Durability is one of the technical bottlenecks restricting fuel cell electric vehicle development. As a result, significant time and resources have been invested in research related to this area worldwide. Current durability research mainly focuses on the single cell and stack levels, which is quite different from the usage scenarios of actual vehicles. There is almost no research on developing durability test cycles on the fuel cell system level. This paper proposes a universal model for developing a durability test cycle for fuel cell system based on the China automotive test cycle. Large-scale comparison tests of the fuel cell systems are conducted. After 1000 h test, the output performance degradation of three mass-produced fuel cell system is 14.49%, 9.59%, and 4.21%, respectively. The test results show that the durability test cycle proposed in this paper can effectively accelerate the durability test of the fuel cell system and evaluate the durability performance of the fuel cell system. Moreover, the methodology proposed in this paper could be used in any other test cycles such as NEDC (New European Driving Cycle), WLTC (Worldwide Harmonized Light Vehicles Test Procedure), etc. And it has comprehensive application value and are significant for reducing the cost of durability testing of fuel cell systems and promoting the industrialization of fuel cell electric vehicles. [ABSTRACT FROM AUTHOR]

Effective forecasting of energy consumption structure is vital for China to reach its "dual carbon" objective. However, little attention has been paid to existing studies on the holistic nature and internal properties of energy consumption structure. Therefore, this paper incorporates the theory of compositional data into the study of energy consumption structure, which not only takes into account the specificity of the internal features of the structure, but also digs deeper into the relative information. Meanwhile, based on the minimization theory of squares of the Aitchison distance in the compositional data, a combined model based on the three single models, namely the metabolism grey model (MGM), back-propagation neural network (BPNN) model, and autoregressive integrated moving average (ARIMA) model, is structured in this paper. The forecast results of the energy consumption structure in 2023–2040 indicate that the future energy consumption structure of China will evolve towards a more diversified pattern, but the proportion of natural gas and non-fossil energy has yet to meet the policy goals set by the government. This paper not only suggests that compositional data from joint prediction models have a high applicability value in the energy sector, but also has some theoretical significance for adapting and improving the energy consumption structure in China. [ABSTRACT FROM AUTHOR]

In the process of global urban development, there are urgent ecological security and environmental pollution problems, green development is the fundamental way for urban sustainable development, economic transformation and mitigation of ecological and environmental problems. Based on the panel data of 283 cities at prefecture level and above in China from 2003 to 2017, this paper analyzes spatial–temporal evolution characteristics of urban green development efficiency (UGDE) and the peer effects of UGDE between cities of different grades. It is found that during the study period, in terms of temporal evolution, the average UGDE in China increased from 0.47 in 2003 to 0.61 in 2017, with a cumulative growth rate of 29.79%, showing a rising trend in general. In terms of spatial evolution, the number of low-efficiency cities and medium-efficiency cities continued to decrease. The eastern region has always been the main distribution area of higher-efficiency cities and high-efficiency cities; in the central region, UGDE in most cities improved significantly; in the western region, UGDE has always lagged behind that in the eastern and central regions. In addition, the center of gravity of UGDE presented a trend of northwest migration in general, with a total displacement of 100.07 km, and UGDE showed a spatial dispersion trend. The empirical results indicate that the improvement of UGDE in large cities has a driving effect on that in neighboring medium cities and small cities through the positive peer effect, and the growth of UGDE in medium cities has a promoting effect on that in neighboring small cities through the positive peer effect; the increase of UGDE in medium cities has a positive peer effect on that in neighboring large cities, and the growth of UGDE in small cities has a positive peer effect on that in neighboring medium cities; UGDE promotes each other between large cities through the positive peer effect. [ABSTRACT FROM AUTHOR]

Accurate prediction of sea level height is critically important for the government in assessing sea level risk in coastal areas. However, due to the nonlinear, time-varying and highly uncertain characteristics of sea level change data, sea level prediction is challenging. To improve the accuracy of sea level prediction, this paper uses a new swarm intelligence algorithm named the sparrow search algorithm (SSA), which can imitate the foraging behavior and antipredation behavior of sparrows, to determine optimal solutions. To avoid the algorithm falling into a local optimal situation, this paper integrates the sine–cosine algorithm and the Cauchy variation strategy into the SSA to obtain an algorithm named the SCSSA. The SCSSA is used to optimize the parameter values of the CNN-BiLSTM (convolutional neural network combined with bidirectional long short-term memory neural network) model; finally, a combined neural network model (named SCSSA-CNN-BiLSTM) is proposed. In this paper, the time series data of seven tidal stations located in coastal China are used for experimental analysis. First, the SCSSA-CNN-BiLSTM model is compared with the CNN-BiLSTM model to predict the time series data of SHANWEI Station. With respect to the training and test sets of data, the SCSSA-CNN-BiLSTM model outperforms the other models on all the evaluation metrics. In addition, the remaining six tide station datasets and five neural network models, including the SCSSA-CNN-BiLSTM model, are used to further study the performance of the proposed prediction model. Four evaluation indices including the root mean squared error (RMSE), mean absolute error (MAE), mean absolute percentage error (MAPE) and coefficient of determination (R2) are adopted. For six stations, the RMSE, MAE, MAPE and R2 of SCSSA-CNN-BiLSTM model are ranged from 20.9217 ~ 27.8427 mm, 9.4770 ~ 17.8603 mm, 0.1322% ~ 0.2482% and 0.9119 ~ 0.9759, respectively. The experimental analysis results show that the SCSSA-CNN-BiLSTM model makes effective predictions at all stations, and the prediction performance is better than that of the other models. Even though the combination of SCSSA algorithm may increase the complexity of the model, indeed the proposed model is a new prediction method with good accuracy and robustness for predicting sea level change. [ABSTRACT FROM AUTHOR]

The Yangtze River (hereafter referred to as the YZR), the largest river in China, is of paramount importance for ensuring water resource security. The Yangtze River Basin (hereafter referred to as the YRB) is one of the most densely populated areas in China, and complex human activities have a significant impact on the ecological security of water resources. Therefore, this paper employs theories related to ecological population evolution and the Driving Force-Pressure-State-Impact-Response (DPSIR) model to construct an indicator system for the ecological security of water resources in the YRB. The report evaluates the ecological security status of water resources in each province of the YRB from 2010 to 2019, clarifies the development trend of its water resource ecological security, and proposes corresponding strategies for regional ecological security and coordinated economic development. According to the results of the ecological population evolution competition model, the overall indicator of the ecological security of water resources in the YRB continues to improve, with the safety level increasing annually. Maintaining sound management of water resources in the YRB is crucial for sustainable socioeconomic development. To further promote the ecological security of water resources in the YRB and the coordinated development of the regional economy, this paper proposes policy suggestions such as promoting the continuous advancement of sustainable development projects, actively adjusting industrial structure, continuously enhancing public environmental awareness, and actively participating in international ecological construction and seeking cooperation among multiple departments. [ABSTRACT FROM AUTHOR]

Green finance (GF) is recognized as a key driver of sustainable development. While existing studies have extensively discussed the relationship between GF and the Sustainable Development Goals (SDGs), few have explored the coupling coordination relationship between GF and SDGs. In this paper, we use data from thirty Chinese provinces (municipalities and autonomous regions) from 2008–2021 to examine the degree of coupling coordination development (CCD) between GF and the SDGs systems using the CCD model. We find that most SDGs and their sub-goals exhibit a significant upward trend, except for SDG8, 14–16. GF presents a fluctuating upward trend, with a significant decline in 2010 and 2019. The CCDs between GF and SDGs and their sub-goals generally show an M-shaped upward trend in most regions, with most of them experiencing a synchronous decline in 2011–2012 and 2019. In the analysis of regional heterogeneity, the eastern region performs better in SDG8–9, the central region performs better in SDG3, 14–15, while the western region performs better in SDG7. This paper provides empirical evidence for a further in-depth understanding of the relationship between GF and SDGs, which can contribute to advancing GF development and the SDG process. [ABSTRACT FROM AUTHOR]

City reputation is a valuable asset for the local economy and firms in the contemporary society. However, the impact of city reputation on micro-level firms has been largely overlooked by the literature. This paper uses the National Civilized City (NCC) policy in China as a quasi-natural experiment to enhance city reputation. We employ the DID approach to investigate the relationship between city reputation and corporate risk-taking. The result shows that corporate risk-taking significantly increases following the NCC policy adoption. Moreover, information asymmetry can strengthen the positive impact of city reputation on corporate risk-taking. Channel tests show that city reputation improves financial condition and decreases default risk, leading to improved risk-taking tolerance. Overall, our paper indicates that city reputation is an important mechanism to improve corporate financial performance, providing empirical evidence for local governments to pursue the NCC title. [ABSTRACT FROM AUTHOR]

This paper examines the coupling coordination degree between digital economy and green technology innovation in 19 urban agglomerations across China from 2011 to 2020. Through the analysis of the coupling coordination degree model, spatial autocorrelation, multi-distance spatial clustering analysis, kernel density analysis and grey correlation model, this study uncovers the mechanism of coupling between digital economy and green technology in Chinese urban agglomerations. Data analysis revealed a significant increase in the coupling coordination between the digital economy and green technology innovation within urban agglomerations. However, there are noticeable spatial imbalances in this trend. Additionally, the multi-distance spatial distance analysis highlights a shift from a random distribution to a clustered distribution of spatial characteristics. The polarization features vary among each urban agglomeration and exhibit a significant positive spatial correlation. Factors such as economic sustainability, creative talent, policy support, digital impetus, and technological support will affect the coupling mechanism of green technology innovation and the digital economy in China's urban agglomerations. Policy recommendations are proposed to foster the development of the digital economy, promote coordinated growth within and beyond urban clusters, and ultimately build a digital ecological civilization that is both green and intelligent. [ABSTRACT FROM AUTHOR]

Old urban community renovation is an important task of urban renewal in China. In order to ensure the quality and efficiency of renovation work, the government requires a method to assess the priority for old urban community renovation. This paper proposes an evaluation model from a more comprehensive perspective. It establishes the evaluation index system with CIPP model. The method of Cloud-VIKOR is selected to construct the evaluation model. Finally, selects nine case communities to verify the evaluation model. The results show that the evaluation index system covers the whole process of renovation project and the evaluation indexes proposed in the existing research. The priority decision result of 9 case communities is basically consistent with the actual renovation sequence and does not change greatly due to the fluctuation of decision-making mechanism coefficient or the evaluation index weight. This evaluation model can help decision-makers diagnose and optimize the renovation project. [ABSTRACT FROM AUTHOR]

In the study of urban development, it is very important to evaluate the influence of production factors reasonably and efficiently for the region to achieve efficient development. The principal aim of this investigation is to amalgamate the conventional measurement model characterized by robust interpretability with the non-parametric model characterized by limited interpretability, thereby enhancing the precision of research outcomes. Towards this objective, the study employs an optimized directional distance function integrated with a global Malmquist–Luenberger index to formulate a comprehensive total factor productivity measurement framework. In elucidating the homogeneous attributes of regions, departing from prior methodologies reliant on manual or direct algorithmic partitioning, this paper employs the K-means clustering algorithm for index discernment, abstracting the concept of K-means clustering centroids to encapsulate regional homogeneity, thereby delineating results through the visualization of regional development potential maps and the evolution of centroid-based clustering trend maps. The findings of the investigation illuminate common patterns of change across disparate regions, proposing a strategy for leveraging regional resource endowments towards a cohesive framework, thereby transcending constraints imposed by production efficiency limitations. Amidst the backdrop of the COVID-19 pandemic, this study draws upon provincial-level data spanning from 2000 to 2018 in China. The conclusive analytical outcomes underscore the pivotal role of energy factors in regional development efficiency, particularly within high-potential development regions, followed by the capital and labor factors. Concurrently, the study discerns a discernible hierarchical pattern among areas of development potential, which exhibits correlation with factor mobility dynamics. [ABSTRACT FROM AUTHOR]

With business process optimization, technological advancement, equipment capability enhancement, and other means, the Railway Passenger Service Department in China is consistently working to improve the efficiency and convenience of passenger entry and exit procedures at railway stations. Concerning passengers' checkout, not only conventional identification approaches based on manual control, identification card, and magnetic thermal paper ticket are supported, but also a recent contactless identification process based on face recognition is applied in some stations. To further improve the contactless identification ability for checkout, an advanced contactless checkout process based on gait-augmented face recognition is innovatively put forward, in which a weakly-supervised body segmentation network named Dwsegnet and an improved GaitSet model are proposed. Through comparison with various models, the effectiveness of both Dwsegnet and the improved GaitSet is validated. Specifically, the contactless identification rate of gait-augmented face recognition is improved by 2.31% when compared to single-modal face recognition, which demonstrates the superiority of the proposed process. [ABSTRACT FROM AUTHOR]

Breast cancer is one of the tumors with the highest prevalence rate among women in the world, and its BRCA1/2 gene is a common mutation site. Talazoparib, as a targeted PARP inhibitor, can effectively control the occurrence and development of breast cancer with BRCA1/2 gene mutation, and play a therapeutic role. Based on the findings from the Phase III EMBRACE trial (NCT01945775 clinical trial), our analysis reveals that the talazoparib group demonstrated a significant extension in progression-free survival, along with improved response markers and patient-reported outcomes when compared to conventional therapies. This study aims to assess the cost-effectiveness of talazoparib for treating advanced breast cancer with germline BRCA1/2 mutations and HER2 negativity, considering the perspectives of health services in China and the United States. The results obtained will serve as a valuable reference for promoting rational drug utilization and enhancing medical resource efficiency. To evaluate the cost-effectiveness of Talazoparib more scientifically and provide clinicians with chemotherapy options, this paper developed a Markov model based on the EMBRACA clinical trial (clinical Trails.gov No., NCT01945775) to simulate the survival events of breast cancer patients in the Talazoparib group and the standard treatment group. The state transition probability and clinical data of breast cancer patients during treatment were extracted from the phase III EMBRACA clinical trial. The cost data generated during the treatment process comes from local hospital pricing, other references, and expert consultation. This article uses US dollars to calculate the treatment cost and incremental cost-effectiveness ratio. Health outcomes are expressed in Quality Adjusted Life Years (QALYs). In addition, Outcomes were measured in quality-adjusted life-years (QALYs), and incremental cost-effectiveness ratio, which robustness was evaluated by deterministic and probabilistic sensitivity analyses. This article establishes a Markov model for single-item sensitivity analysis. The results show that the economic benefits of using Talazoparib as a new treatment strategy in both China and the United States are higher than other drugs, and it is cost-effective. Compared to the control group, the incremental cost incurred by the Talazoparib treatment group in China was $2484.48/QALY, with an incremental QALY of 1.5. However, Talazoparib in the United States holds a dominant position, saving costs of $10,223.43 and increasing QALYs by 1.5. The clinical treatment effect of Talazoparib group in BRCA1/2 mutant advanced breast cancer patients is better than that of the standard treatment group, and the progression free survival period is significantly prolonged. From the perspective of medical and health services in China and the United States, the Talazoparib group is more economical than the standard treatment group in treating patients with BRCA1/2 mutant advanced breast cancer. [ABSTRACT FROM AUTHOR]

Intelligent computing is transforming safety inspection methods and response strategies in coal mines. Due to the significant safety hazards associated with mining excavation, this study proposes a multi-source data based predictive model for assessing gas risk and implementing countermeasures. By examining the patterns of gas dispersion at the longwall face, utilizing both temporal and spatial correlation, a predictive model is crafted that incorporates safety thresholds for gas concentrations, four-level early warning method and response strategy are devised by integrating weighted predictive confidence with these correlations. Initially tested using a public dataset from Poland, this method was later verified in coal mine in China. This paper discusses the validity and correlation of multi-source monitoring data in temporal and spatial correlation and proposes a risk warning mechanism based on it, which can be applied not only for safety warning but also for regulatory management. [ABSTRACT FROM AUTHOR]

Uncaria rhynchophylla is an important traditional herbal medicine in China, and the yield and quality of Uncaria rhynchophylla can be improved by suitable soil conditioners because of changing the soil properties. In this paper, Uncaria rhynchophylla associated alkaloids and soil microbial communities were investigated. The field experiment was set up with the following control group: (M1, no soil conditioner) and different soil conditioner treatment groups (M2, biomass ash; M3, water retention agent; M4, biochar; M5, lime powder and M6, malic acid). The results showed that M2 significantly increased the fresh and dry weight and the contents of isorhynchophylline, corynoxeine, isocorynoxeine, and total alkaloids. Acidobacteria, Proteobacteria, Actinobacteria, and Chloroflexi were major bacterial phyla. Correlation analysis showed that fresh and dry weight was significantly positively correlated with Acidobacteria, while alkali-hydrolyzable nitrogen, phosphatase activity, fresh and dry weight, corynoxeine, and isocorynoxeine were significantly negatively correlated with Chloroflexi. The application of soil conditioner M2 increased the abundance of Acidobacteria and decreased the abundance of Chloroflexi, which contributed to improving the soil nutrient content, yield, and quality of Uncaria rhynchophylla. In summary, biomass ash may be a better choice of soil conditioner in Uncaria rhynchophylla growing areas. [ABSTRACT FROM AUTHOR]

Exploring the spatial coupling relationship and interaction mechanism between green urbanization (GU) and tourism competitiveness (TC) is of great significance for promoting urban sustainable development. However, the lack of research on the interaction mechanism between GU and TC limits the formulation of effective environmental management policy and urban planning. Taking 734 counties in the Yellow River Basin (YRB) as the study area, this paper analyzes the spatial coupling relationship between GU and TC on the basis of comprehensive evaluation of GU and TC. Then, the interactive mechanism between GU and TC is systematically discussed, and the synergistic development strategy of the two is proposed. The results show that the GU level presents a multicore circle structure, with provincial capitals, prefecture-level urban districts and economically developed counties in east-central regions as high-value centers. The TC at county scale presents a multi-center spatial structure. Additionally, there is a significant positive spatial coupling between GU and TC in the YRB. The analysis further reveals that green urbanization level, social progress, population development, infrastructure construction, economic development quality, and eco-environmental protection has a observably influence on TC. Tourism competitiveness, service competitiveness, location competitiveness, resource competitiveness, market competitiveness, environmental influence, and talent competitiveness has a observably influence on GU. TC can promote GU, and the improvement of green urbanization level can support the development of tourism competitiveness. According to the spatial zoning method, 734 counties are divided into 6 categories, and the coordinated development strategy of GU and TC for each type of district is proposed. [ABSTRACT FROM AUTHOR]

With the continuous development of the economy and society, along with the sustained population growth, the issue of water resources carrying capacity in China has attracted increasing attention. This paper constructs a model for evaluating the provincial water resources carrying capacity in China from four dimensions: water, economy, society, and ecology. Utilizing this model, we analyze the spatiotemporal variations in water resources carrying capacity among 31 provinces in China from 2005 to 2021. Additionally, we delve into the coupling coordination and influencing factors of water resources carrying capacity. The study reveals an overall increasing trend in China's water resources carrying capacity index, with the ecological indicator exhibiting the most significant growth while the water resources sub-indicator lags behind. There are notable regional differences, with higher water resources carrying capacity observed in the eastern coastal areas and relatively lower capacity in the western regions. The ecological criterion becomes a core factor constraining water resources carrying capacity from 2005 to 2015, gradually giving way to the prominence of the social criterion since 2015. The coordination degree is relatively higher in the eastern regions, more scattered in the western regions, and relatively stable in the central regions. Based on the research findings, a series of recommendations are proposed, including strengthening environmental protection policies, optimizing water resources management mechanisms, improving water use efficiency, and promoting economic structural diversification. These suggestions aim to facilitate the sustainable development of water resources carrying capacity in China. [ABSTRACT FROM AUTHOR]

Farmland transfer is a critical component in facilitating agricultural scale management and improving agricultural production efficiency. This study examines the spatial distribution of farmland transfer in China and identifies the factors influencing it, offering valuable guidance for advancing China's farmland transfer practices. Through the application of mathematical statistics and GIS spatial analysis, the study investigates changes in spatial patterns related to the scale, rate, mode, and recipients of farmland transfer across China's 30 provinces from 2015 to 2020. Geographical detectors are also employed to identify the key factors influencing the extent and pace of farmland transfer. The study reveals that between 2015 and 2020, China's farmland transfer area increased from 29,789 to 37,638 million hectares. Provinces with abundant farmland resources generally experienced larger farmland transfers, while economically developed regions and major grain-producing areas saw higher rates of farmland transfers. The predominant mode of farmland transfer in China was leasing (subcontracting), accounting for over 80% of the total transferred area. Large-scale grain growers and family farms were significant participants in farmland transfers, acquiring approximately 60.1% of the transferred lands, followed by professional cooperatives (21.5%), enterprises (10.4%), and other entities (7.9%). Key factors influencing the farmland transfer area include the "regional farmland area", the "proportion of family farms supported by loans", and the "proportion of non-agricultural population", with explanatory powers of 0.663, 0.319, and 0.225, respectively. Notably, there is a substantial interaction between the "regional farmland area" and factors such as the "proportion of family farms supported by loans" and the "grain yield per unit area", with explanatory powers reaching 0.957 and 0.901, respectively. These findings offer valuable insights for promoting farmland transfer in agriculturally rich regions. Factors affecting the farmland transfer rate include "grain yield per unit area", "GDP per capita", and the "proportion of non-agricultural population", each with an explanatory power above 0.500. Moreover, their interactive explanatory powers with other indicators exceed 0.600, indicating that provinces with high agricultural productivity or economic development levels are more likely to undergo farmland transfer. The paper concludes by proposing strategies and recommendations to promote farmland transfer in both "large agricultural areas" and "metropolitan suburbs." [ABSTRACT FROM AUTHOR]

With the deep extension of coal mining in China, fault water inrush has become one of the major disasters threatening the safety production of coal mine. Based on the control equations of steady state and non-Darcy seepage in fractured rock mass, the multi-parameter nonlinear dynamic seepage equations of fractured rock mass are established in this paper. Based on the nonlinear dynamics theory, the function of the state variable in the system is derived, and the influence of the gradual change of non-Darcy flow factors on the structural stability of seepage system is studied. The research achievements show that there are three branches in the equilibrium state of the seepage system. Specifically, the stability of the equilibrium state changes abruptly near the limit parameter. The seepage dynamic system of fractured rock mass has the delayed bifurcation, and the coal mine disaster such as fault water inrush occurs easily at the bifurcation point. The research results are of great significance to enrich the theory of fault water inrush in coal mine, and to reveal the disastrous mechanism of fault water inrush and guide its prevention and control technology in coal mine, which can provide the theoretical reference for predicting the water seepage stability in fractured rock mass. [ABSTRACT FROM AUTHOR]

Logistics distribution is one of the main sources of carbon dioxide emissions at present, and there are also such distribution problems in the shipbuilding process. With the increasing attention paid to environmental problems, how to effectively reduce the energy consumption of block transportation and improve the utilization rate of resources in the factory is the key problem that China's shipbuilding industry needs to solve at present. This article considers the time windows for block transportation tasks, as well as the self-loading constraints of different types of flat cars, and establishes an optimization model that minimizes the empty transport time and energy consumption of the flat cars as the optimization objective. Then, an Improved Genetic Whale Optimization Algorithm is designed, which combines the cross and mutation ideas of genetic algorithms and proposes a whale individual position updating mechanism under a mixed strategy. Furthermore, the performance and computational efficiency of the algorithm are verified through comparative analysis with other classical optimization algorithms on standard test examples. Finally, the shipyard's block transportation example proves that the energy-saving ship block transportation scheduling method can effectively improve the efficiency of shipbuilding enterprise's block transportation and reduce the energy consumption in the block transportation process. It proves the engineering practicality of the green dispatching method proposed in this paper, which can further provide a decision-making method for shipyard managers. [ABSTRACT FROM AUTHOR]

The health of young people is crucial for the future and development of a nation. It is the collective responsibility and imperative mission of society to ensure the holistic well-being, both physically and mentally, of young individuals. Therefore, it is essential to thoroughly comprehend the factors that influence their health in order to expedite the exploration of effective solutions. The objective of this study is to comprehend the mechanisms that underlie the correlation between physical exercise behavior and psychological resilience among teenagers, while also examining the mediating role played by social sensitivity and need to belong. So put forward the hypothesis: (1) physical exercise behavior can positively predict the psychological resilience. (2) Social sensitivity and need to belong plays a mediating role between physical exercise behavior and psychological resilience. (3) Social sensitivity and need to belong plays a chain mediating role between physical exercise behavior and psychological resilience. Using the cluster sampling method, a total of 1106 students (with an average age of 15.7 and a standard deviation of 0.598) who met the requirements were surveyed from Shandong Province in China. Standard scales were utilized to assess Physical Exercise Behavior, Psychological Resilience, Social Sensitivity, and Need to Belong. For data analysis, Pearson's correlation analysis and bias-corrected percentile Bootstrap method were sequentially conducted. (1) The present study did not find any significant methodological bias, and the observed correlations between physical exercise behavior, psychological resilience, social sensitivity, and need to belong were all statistically significant; (2) Based on the self-determination theory, this study elucidates the relationship between physical exercise behavior and psychological resilience among teenagers. The findings indicate that physical exercise behavior positively predicts the need to belong and psychological resilience, while negatively predicting social sensitivity. Similarly, social sensitivity negatively predicts the need to belong and psychological resilience. Moreover, the need to belong directly and positively predicts psychological resilience. Importantly, all hypotheses proposed in this paper were empirically supported. (3) The indirect effect of the path mediated by social sensitivity is 0.009, while the indirect effect of the path mediated by need to belong is 0.033. Additionally, the combined indirect effect of both social sensitivity and need to belong as mediating variables is 0.014. (4) The cumulative sum of all these indirect effects amounts to 0.056. Based on the self-determination theory, we propose a chain mediation model, specially, physical exercise behavior can significantly positively predict psychological resilience, among which, social sensitivity and need to belong play a significant mediating role between Physical exercise behavior and psychological resilience. In addition, the adoption of good physical exercise behavior can enhance the psychological resilience of adolescents by diminishing social sensitivity and augmenting the need to belong. [ABSTRACT FROM AUTHOR]

This paper develops a theoretical model of determinants influencing multimodal fake review generation using the theories of signaling, actor-network, motivation, and human–environment interaction hypothesis. Applying survey data from users of China's three leading E-commerce platforms (Taobao, Jingdong, and Pinduoduo), we adopt structural equation modeling, machine learning technique, and Bayesian complex networks analysis to perform factor identification, path analysis, feature factor importance ranking, regime division, and network centrality analysis of full sample, male sample, and female sample to reach the following conclusions: (1) platforms' multimodal recognition and governance capabilities exert significant negative moderating effects on merchants' information behavior, while it shows no apparent moderating effect on users' information behavior; users' emotional venting, perceived value, reward mechanisms, and subjective norms positively influence multimodal fake review generation through perceptual behavior control; (2) feature factors of multimodal fake review generation can be divided into four regimes, i.e., regime 1 includes reward mechanisms and perceived social costs, indicating they are key feature factors of multimodal fake review generation; merchant perception impact is positioned in regime 2, signifying its pivotal role in multimodal fake review generation; regime 3 includes multimodal recognition and governance capabilities, supporting/disparaging merchants, and emotional venting; whereas user perception impact is positioned in regime 4, indicating its weaker influence on multimodal fake review generation; (3) both in full sample, male sample, and female sample, reward mechanisms play a crucial role in multimodal fake review generation; perceived value, hiring review control agency, multimodal recognition and governance capabilities exhibit a high degree of correlation; however, results of network centrality analysis also exhibit heterogeneity between male and female samples, i.e., male sample has different trends in closeness centrality values and betweenness centrality values than female sample. This indicates that determinants influencing multimodal fake review generation are complex and interconnected. [ABSTRACT FROM AUTHOR]

Due to the increased frequency of extreme weather events and the implementation of the China's dual-carbon target, thermal power companies have been under pressure to construct green infrastructure and to actively pursue low-carbon transformation in response to stricter environmental regulations. This research thus selects 30 listed thermal power enterprises in China as study objects and assesses their green investment efficiency in the low-carbon transition process using three-stage DEA evaluation model with environmental regulation as an exogenous variable. Based on this, a benchmark regression model is used to corroborate the relationship between environmental regulation and green investment. Simultaneously, we carry out analysis to compare the correlation between thermal power firms' green investment efficiency and their focus on green investments. The results show in terms of total efficiency that environmental regulation significantly improves the total efficiency of 80% of thermal power enterprises compared to the absence of this exogenous variable. With the addition of environmental regulation, firms' total efficiency declines gradually in general from 2018 to 2022, with the mean value of efficiency falling by 0.068. In terms of stage-specific efficiency, the efficiency of the green investment stage of the majority of firms is between 0.3 and 0.6, which is much lower than that of the operational stage and the market performance stage. In terms of sub-indicator efficiency, both green investment efficiency and social donation efficiency among thermal power enterprises show obvious polarization, with 30% of them having an efficiency of 1 and 30% less than 0.1. In terms of green investment focus, thermal power unit renovation has a more obvious role in boosting the green investment efficiency of thermal power enterprises than do wind power and photovoltaic projects. Therefore, both governmental departments and thermal power enterprises need to take active measures in order to achieve green transformation from the perspective of green investment efficiency. Through the segmentation of important projects of green investment, this paper provides a reasonable investment direction reference for the sustainable transformation of China's thermal power industry. It also provides a rich and novel theoretical basis for the Chinese government to further improve the relevant environmental protection laws and regulations of thermal power industry. [ABSTRACT FROM AUTHOR]

The colloidal borescope, using colloidal particle motion, is used to monitor the flow velocities and directions of groundwater. It integrates advanced techniques such as microscopy, high-speed photography, and big data computing and enjoys high sensitivity at the micron level. However, In the same well, the groundwater flow velocity monitored by colloidal hole mirror is varies greatly from that obtained by conventional hydrogeological monitoring, such as pumping test. In order to solve this problem, the stability catcher and stratified packer are designed to control the interference of the vertical flow in drilling, and to monitor the flow velocity and direction of groundwater velocity at the target aquifer and target fracture. Five wells with different aquifers and different groundwater types were selected for monitoring in south-central China. The instantaneous velocity and direction are converted into east–west component and north–south component, the average velocity and direction is calculated according to the time of 10 min, and the particle trajectory diagram is established. Based on these results, it proposed a concept of cumulative flow velocity. Using curve-fitting equations, the limits of cumulative flow velocities as the monitoring time tends to infinity were then calculated as the actual flow velocities of the groundwater. The permeability coefficient of aquifer is calculated by using the fissure ratio of aquifer, hydraulic slope and flow velocity, and compared with the permeability coefficient obtained by pumping test. The results are as follows: (1) The variation coefficient of the instantaneous flow velocity measured at the same depth in the same well at different times is greater than that of the time average flow velocity and greater than that of the cumulative flow velocity. The variation coefficient of the actual velocity is the smallest, indicating that the risk of using the actual flow velocity is lower. (2) The variation coefficient of the flow rate monitored at different depths in the same well is mainly controlled by the properties of the aquifer. The more uniform water storage space in the aquifer, the smaller the variation coefficient. (3) The comparison between the permeability coefficient obtained by monitoring and the permeability coefficient obtained by pumping test shows that the flow of structural fissure water controlled by planar fissure is more surface flow, and the results are consistent. When the groundwater flow is controlled by pores and solution gaps, the flow channel is complicated, which is easy to produce turbulent flow, and the result consistency is poor. (4) According to different research accuracy requirements, different monitoring and calculation methods can be selected for different aquifers and groundwater types. Researches show that, the permeability coefficient calculated for the actual flow velocity in well DR01 is the same as that calculated for the pumping test. The aquifer characteristics reflected by the coefficient of variation of the actual flow velocity in the same aquifer are more realistic. The pumping test method obtains the comprehensive parameters of a certain aquifer, and this method can be used to monitor a certain fissure. In this paper, the new technology developed for monitoring, and the new algorithm established for data processing, can accurately obtain the flow velocity and direction of groundwater, using capsule hole mirror monitoring method. The key parameters of hydrogeology can be obtained by using one well, which can reduce the time and cost input and improve the work efficiency. [ABSTRACT FROM AUTHOR]

In order to quantitatively calculate the critical depth and critical load of mines affected by rock burst, and to achieve effective prevention and control of rock burst in coal mines, this paper proposes a mechanical model for predicting the occurrence of rock burst in coal mine roadways based on catastrophe theory. Additionally, a theoretical calculation formula for initiating rock burst is derived. The first step was to establish a mechanical analysis model, which directly correlated with the in-situ stress, physical and mechanical characteristics of the coal-rock mass, and engineering structural parameters. Following this, a mechanical instability criterion was derived for the key load-bearing circle within the surrounding rock of the roadway. In the final step, the critical depth and load for rock burst initiation were verified for 25 distinct coal mines in China that were prone to rock burst hazards. The research results demonstrate that the discrepancy between the theoretically calculated critical depth and the actual measured statistical values was less than 35%. In addition, the difference between the theoretically determined critical depth and the value calculated by Pan Yishan was less than 32%. Notably, the ratio of the theoretically calculated critical load to the uniaxial compressive strength of the coal-rock mass ranged from 0.38 to 1.93. This aligns with empirical data on rock burst occurrences, as set out in the engineering classification standards for rock masses. These research outcomes substantiated the practical utility of the proposed theory, thereby laying a robust theoretical groundwork for the quantitative control of rock burst. [ABSTRACT FROM AUTHOR]

Aiming at the current low degree of mechanization of pomegranate sprouting tiller pruning in China, all relying on manual pruning, this paper designs a PLC-based pomegranate sprouting tiller removal machine. This machine adopts the identification method of wireless map transmission, the sprouting tiller removal method of multi-cylinder cooperative operation, and the MCGS configuration to realize the interaction between the user and the system, which realizes the displacement and angle compensation of the end-effector under complex conditions to realize the all-around accurate removal of the pomegranate sprouting tiller. The performance test and finite element analysis showed that the device could remove up to 74.62% of sprouting tillers, and the damage rate was as low as 18%. This meets the requirements of pomegranate plantations for the removal of emergent tillers. [ABSTRACT FROM AUTHOR]

Climate change has become an unavoidable problem in achieving sustainable development. As one of the major industries worldwide, tourism can make a significant contribution to mitigating climate change. The main objective of the paper is to assess the development level of low-carbon tourism from multi-aspect, using the Yellow River Basin as an example. Firstly, this study quantified tourism carbon dioxide emissions and tourism economy, and analyzed their evolution characteristics. The interaction and coordination degree between tourism carbon dioxide emissions and tourism economy were then analyzed using the improved coupling coordination degree model. Finally, this study analyzed the change in total factor productivity of low-carbon tourism by calculating the Malmquist–Luenberger productivity index. The results showed that: (1) the tourism industry in the Yellow River Basin has the characteristics of the initial environmental Kuznets curve. (2) There was a strong interaction between tourism carbon dioxide emissions and tourism economy, which was manifested as mutual promotion. (3) The total factor productivity of low-carbon tourism was increasing. Based on the above results, it could be concluded that the development level of low-carbon tourism in the Yellow River Basin has been continuously improved from 2000 to 2019, but it is still in the early development stage with the continuous growth of carbon dioxide emissions. [ABSTRACT FROM AUTHOR]

This transition from gathering to cultivation is a significant aspect of studying early agricultural practices. Fruit trees are an essential component of food resources and have played a vital role in both ancient and modern agricultural production systems. The jujube (Ziziphus jujuba Mill.), with its long history of cultivation in northern China, holds great importance in uncovering the diet of prehistoric humans and understanding the origins of Chinese agricultural civilization. This paper focuses on the domestication of jujube by analyzing the morphology of jujube stones found in three Neolithic sites in northern China's Qi River basin, Zhujia, Wangzhuang, and Dalaidian. The measurements of these jujube kernels are compared with those found in other areas of northern China, as well as modern jujube kernels that were collected. The measurements revealed that the length-to-diameter (L/D) ratio of sour jujube kernels ranged from 1.36 to 1.78, whereas the L/D ratio of cultivated jujube stones varied between 1.96 and 4.23. Furthermore, jujube stones obtained from Zhujia and Wangzhuang sites exhibit pointed ends and possess an elongated oval or narrow oval shape overall, which is indicative of clearly artificial domestication traits. Therefore, this study suggests that jujube was selected and cultivated as an important food supplement in the Qi River basin no later than around 6200 BP. [ABSTRACT FROM AUTHOR]

Currently, a standardized design and calculation specification for suction drum foundations has yet to exist in China. The engineering design currently depends mainly on the subjective understanding and engineering experience of the designers, which can be considered somewhat blind and subjective. In this paper, we utilize the offshore wind power project in Yangjiang City, Guangdong Province, as our case study. Building upon domestic and international research results, relevant investigations, design specifications, and engineering applications in related fields, we conduct a systematic study on the design calculation and construction control technology of the suction drum foundation. The document presents the design calculation and inspection of the suction drum foundation. Building on this foundation, we propose a sinking feasibility analysis method and a parameter value method for the suction drum foundation calculation. We also examine the suction drum foundation construction process, examining its control parameters, technology, and standards. Finally, based on the measured data from six four-barrel guided frame platform suction drum foundations that were successfully installed, the proposed design and control method are evaluated, and their effectiveness is verified. The results of this study can provide valuable references for the design and construction of similar suction drum foundation platforms. [ABSTRACT FROM AUTHOR]

Encryption chips are specialized integrated circuits that incorporate encryption algorithms for data encryption and decryption, ensuring data confidentiality and security. In China, the domestic SM4 algorithm is commonly utilized, as opposed to the international AES encryption algorithm. These widely implemented encryption standards have been proven to be difficult to crack through crypt analysis methods Currently, power consumption side-channel attacks are the most prevalent method. They involve capturing power consumption data during the encryption process and subsequently recovering the encryption key from this data. The two leading methods are Differential Power Analysis (DPA) and machine learning techniques. DPA does not necessitate prior knowledge but relies heavily on the number of power consumption curves. With only 50 power consumption data points, the accuracy is a mere 80%. Machine learning methods require prior knowledge, achieving an accuracy rate above 95% with only 30 power traces, albeit with training times typically exceeding 15 min. In this paper, a distributed energy analysis attack approach was presented based on Correlation Power Analysis (CPA). The power consumption data was divided into 16 subsets, with each subset corresponding to 8 bytes of the key. By training each subset separately, the 8-byte key's corresponding power consumption data is reduced to only 100 dimensions, resulting in a 76% decrease in cracking time and a 3% improvement in cracking accuracy rate.This article also trains a more complex 256 classification model to directly crack the final key, achieving a success rate of 28% in cracking 128-bit passwords with only 1 power trace [ABSTRACT FROM AUTHOR]

Shenfu Dongsheng coal field is a cross-century energy base which is developed and constructed in China. In recent years, some mines have successively entered to the coal seam of the second layer. Due to the reasons of early mining, many coal pillars are left in the coal seam of the first layer, resulting in the phenomenon of strong ore pressure in the mining range before and after the coal pillar in the lower coal seam and even causing the buckling accident. In order to solve such safety problems, this paper takes the 22,307 working face in Bulianta coal mine as the research object, adopts physical similarity simulation experiment and theoretical analysis to systematically study the overlying rock characteristics and abnormal ore pressure manifestation mechanism of shallow and close coal seam in different working stages. The results show that the roof overburden of the key layer in the lower group bends and sinks when the coal pillar is mined, resulting in the activation and instability of the "masonry beam" structure formed by the roof of the upper coal seam. When the coal pillar is discharged, the residual concentrated coal pillar and the room type coal pillar are unstable under the action of high supporting stress, resulting in shear failure of the inter-layer rock in the upper part of 22,307 working face, causing the strong dynamic pressure of the working face to appear and then leading to the buckling accident. The working resistance of the support in each stage is obtained by establishing the structure diagram of the overlying rock under each stage and the corresponding mechanical structure model. Finally, the working resistance required by the support in the mining stage under the goaf is 16,692.6 kN, the working resistance required by the support in the coal pillar stage is 19,692.6 kN, the working resistance required by the support in the mining stage under the concentrated coal pillar is 13,150.6 kN, and the working resistance required by the support in the coal pillar stage is 19,215.6 kN. [ABSTRACT FROM AUTHOR]

Underground coal mining leads to land subsidence, which, in turn, results in damage to buildings and infrastructure, disturbs the original ecological environment, and hinders the sustainable development of coal mining cities. A reasonable estimation of land subsidence, on the other hand, is the foundation for building protection, land reclamation, and ecological environment reconstruction. However, when we applied the existing land subsidence estimation theory to the deep mining areas of the Ordos coalfield in western China, there was a significant deviation between the estimations and the measurements. To explain such unusual case, we propose using the overburden's average GSI (Geological Strength Index) value instead of the compressive strength (UCS) of rock specimens for a better representation of the overburden's overall properties. By using on-site subsidence monitoring results and historical data, we provided evidence which supports that the overburden's average GSI value has a much greater impact on subsidence rates than the UCS. Subsequently, we investigated the relationship between three typical overburden's GSI values and the subsidence rates via a calibrated numerical model, revealing the variation patterns of maximum surface subsidence when the overburden's average GSI value is set at 30, 50, and 75, respectively. Finally, on the basis of the measured and simulated results, we discussed a non-conventional strip mining method for mining subsidence control in the deep mining areas of the Ordos coalfield in western China, and explained why it is possible and what are the significant advantages behind. The proposed methods, findings, and suggestions in this paper are therefore quite helpful for researchers and engineers who wish to estimate and control the mining-induced land subsidence, as well as for those who are particularly interested in the study of environment science related to land subsidence. [ABSTRACT FROM AUTHOR]

Digital transformation and green innovation are powerful initiatives to achieve carbon peaking, carbon neutrality targets and high-quality economic development. Using a sample of high energy-consuming listed enterprises from 2012 to 2021, a double fixed-effect model is constructed to verify the effect of green innovation on the carbon emission reduction performance of high energy-consuming enterprises, and digital transformation is used as a moderating variable to analyze the inner mechanism of green innovation affecting the carbon emission reduction performance of high energy-consuming enterprises under the effect of digital transformation. The empirical results show that green innovation can significantly improve the carbon emission reduction performance of energy-consuming enterprises, while digital transformation positively moderates the effect of green innovation on the carbon emission reduction performance of energy-consuming enterprises. When considering the industry heterogeneity, the moderation effect of digital transformation is significant in the chemical raw materials and chemical products manufacturing industry and the electricity and heat production and supply industry, but the petroleum processing and coking and nuclear fuel processing industry, the non-metallic mineral products industry, the ferrous metal smelting and rolling processing industry and the non-ferrous metal smelting and rolling processing industry are not yet significantly affected by green innovation and digital transformation. The findings of the study provide empirical evidence to promote the improvement of carbon emission reduction performance of energy-intensive enterprises in China and to achieve the "double carbon" target. [ABSTRACT FROM AUTHOR]

The study of the fluid inclusions of W–Mo deposits in the mineralization area of Ningshan–Zhen'an , Shaanxi Province, China shows that the gas–liquid two-phase inclusions are mainly present in W–Mo deposits, and the ore-forming fluid can be divided into four types: high-temperature type, middle–high-temperature type, middle-temperature type and low-temperature type. The formation depths of the W–Mo mineralization range from 4.2 to 8.4 km. The boiling and mixing of fluid may have been important mechanisms for the formation of W–Mo mineralization. The skarn-type mineralization is dominated by magmatic water, the quartz-vein-type mineralization includes both magmatic water and meteoric water, and the meteoric water is more involved in the quartz-fluorite-vein-type, beryl-quartz-vein-type and pegmatite-type mineralization. Magma is the main source of sulfur; that is, magma is the main source of mineralization. Combined with the metallogenic setting and geological characteristics of typical ore deposits, in the process of structural system transformation in South Qinling, the ore-forming magma fluid in the Late Indosinian–Yanshanian period was uplifted and emplaced along the NW–WNW direction and NE–NNE direction, and eventually, NW–WNW fault-controlled skarn-type W–Mo mineralization and quartz-vein-type W–Mo deposits accompanied by greisenization, albitization and potash feldspathization formed. [ABSTRACT FROM AUTHOR]

The investigation into the impact of gravel on water infiltration process and hydraulic parameters in stony soil could offer a theoretical basis to enhance water availability in rocky mountain area. A one-dimensional vertical infiltration experiment was used in this study. Six groups of gravel content of 0% (CK), 10% (W1), 20% (W2), 30% (W3), 40% (W4) and 50% (W5) were established to explore the changes in the wetting front, cumulative infiltration volume and infiltration rate. Then the accuracy of four infiltration models in simulating soil water infiltration processes was evaluated. Finally, Hydrus-1D was used to perform numerical inversion of the soil water content after infiltration. The findings revealed that: (1) When the infiltration time reached 300 min, the wetting front of the W1, W2, W3, W4 and W5 treatments was 11.00%, 17.00%, 32.25%, 38.75% and 54.50% lower than CK, the cumulative infiltration volume was 29.80%, 38.97%, 45.62%, 54.74% and 73.17% lower than CK, and the stable infiltration rate was 50.98%, 52.94%, 66.67%, 68.63% and 86.27% lower than CK. (2) The soil–water infiltration processes were accurately described by the Horton model, the coefficient of determination (R2) > 0.935. (3) The simulation results of Hydrus-1D showed that with the increase of gravel content, the values of the retention water content (θr), saturated water content (θs), shape coefficient (n) and saturated hydraulic conductivity (Ks) were decreased, the values of the reciprocal of air-entry (α) were increased. The value of R2 was more than 0.894, the root mean square error (RMSE) and mean absolute error (MAE) were less than 2%, which demonstrated that the Hydrus-1D model exhibited superior capability in simulating the changes of water content in stony soil in rocky mountain area. The findings of this study demonstrated that gravel could decrease the water infiltration process and affect the water availability. It could provide data support for the water movement process of stony soil and rational utilization of limited water resources in mountainous area. [ABSTRACT FROM AUTHOR]

Previous research on the association between Family Doctor Contract Services (FDCS) and health has only considered a single indicator of health and has not considered the endogeneity of independent variables. This study aimed to evaluate the association from a multidimensional perspective of the health of middle-aged and older people using the instrumental variables method and determine the underlying mechanisms. Using data from the 2018 China Health and Retirement Longitudinal Study surveys, a total of 19,438 sample was obtained. Health was measured by health related-quality of life (HR-QoL), subjective well-being, and cognitive function. The instrumental variables method was used to estimate the association. Mediation analysis was employed to analyze the underlying mechanisms. The results of the instrumental variables method showed a correlation between FDCS and health, such as HR-QoL (η = 33.714, p < 0.01), subjective well-being (η = 1.106, p < 0.05), and cognitive function (η = 4.133, p < 0.05). However, we found no evidence that FDCS improved physical health. We also identified reduced utilization of healthcare services and increased social activities as mediators of the effect of FDCS on health. The Chinese government should improve incentive-based initiatives to improve the quality of FDCS. Moreover, more attention needs to be paid to the multidimensional health of middle-aged and older people, especially vulnerable groups, such as older individuals and those in rural areas. [ABSTRACT FROM AUTHOR]

This research delves into the intricate nexus of particle size, mineralogical composition, surface attributes, elemental mapping, and rare earth element (REE) adsorption mechanisms within an ion-adsorption clay sample from South America. The investigation entails the fractionation of the ion-adsorption clay into three size categories: S1 (< 0.25 mm), S2 (0.25–0.5 mm), and S3 (0.5–2 mm). Each fraction undergoes meticulous characterization to unveil its elemental composition, mineralogical composition, surface area, morphological characteristics, elemental mapping, and the mechanisms governing REE incorporation. The results indicate that S1 has 31% physiosorbed, 8% chemisorbed, and 61% mineralized REEs, while S2 has 40% physiosorbed, 5% chemisorbed, and 55% mineralized REEs, and S3 has 24% physiosorbed, 5% chemisorbed, and 71% mineralized REEs. The physisorbed REEs are attributed to the presence of kaolinite, conducive to mostly physisorption. In terms of grain size and REE content/type relationship, the results show that REE content decreases with increasing grain size; however, there is not a clear trend in terms of REE occurrence modes with grain size. Heavy rare earth elements (HREEs) are discernibly favored in adsorption over light rare earth elements (LREEs). This preference is underpinned by the weathering processes that led to the formation of ion-adsorption clay, which facilitated the transport and accumulation of HREEs. Notably, the ion-adsorption clay encompasses a substantial content of mineralized REEs, necessitating more demanding extraction methodologies, such as acid baking followed by water leaching if complete extraction of all REEs is desired. Among the desorbable REEs, physisorption dominates, encompassing over 80% of the total. Chemisorbed REEs exhibit versatility in association with various minerals, encompassing kaolinite, quartz, and goethite. In essence, this study unveils the intricate interplay between particle dimensions, mineralogical constitution, surface attributes, and REE adsorption modes within this ion-adsorption clay sample. The ion-adsorption clay in this study contains a significant portion of mineralized REEs that cannot be extracted using the mild conditions typically employed for the desorption process. Additionally, the REE concentration in this ion-adsorption clay is notably higher than the average found in clay deposits worldwide, reaching levels comparable to those of regolith deposits in China, which are a major global source of REEs. This remarkable concentration of REEs, along with the unique modes of their occurrence in this deposit, presents a significant interest to the scientific community. [ABSTRACT FROM AUTHOR]

The evaluation of natural ventilation potential for effective sustainable options and innovative green building design strategies is of great interest to architects, researchers and governments. From a retrospective review, we found that the potential evaluation of natural ventilation (NV) cooling effectiveness in the same category based on similar meteorological uncertainty, research objectives and objects showed significant differences. Uncertainties added and uncertainty propagation (both model form uncertainties and parameter uncertainties) could result in large discrepancies between simulation outcomes and real scenarios, especially in the design performance modeling (DPM) phase. In this conceptual design stage, a few parameters are available and therefore decisive. It is necessary to review and identify the key performance indicators and explore the extent to which deviations are caused by inconsistencies or biases in model information. As a basis for more concrete research, we propose statistical tests based on quantitative evaluations to explore the rule of natural ventilation potential volatility and identify whether there is a significant potential improvement resulting from the critical parameter enhancement with the optimal relationship. The showcase is applied in China, where there has been a significant amount of criticism regarding the current building climate zoning due to the perceived coarseness of the system and where there has been an active exploration into the possibility of redefining building climate zoning with a view toward improving its accuracy and effectiveness. [ABSTRACT FROM AUTHOR]

Agriculture water use accounts for 70% of the total water withdrawal worldwide. The evapotranspiration during crop growth is one of the important hydrological processes in the agricultural water cycle. This study proposed the concept of artificial irrigation evapotranspiration of irrigated crops to describe that the evapotranspiration caused by irrigation water use. Irrigated crops rely on two kinds of water sources: precipitation and irrigation water. With the construction of irrigation schemes, the artificial irrigation evapotranspiration plays an increasingly important role in the dualistic water cycle system of irrigated cropland. To reveal the amount of artificial irrigation evapotranspiration of 17 categories of irrigated crops in China, this study proposed a new quantitative model system which was established based on traditional evapotranspiration models and soil water balance models. Based on the new model system, we calculated the annual artificial irrigation evapotranspiration of irrigated crops for the period 2013 to 2017 in China. The results showed that the proportion of artificial irrigation evapotranspiration to the total evapotranspiration of irrigated crops was 41.3%, whose value was 228.1 km3 a−1. The artificial irrigation evapotranspiration in different agricultural water management regions were 90.0 km3 a−1 in the northeast region, 86.0 km3 a−1 in the southeast region, and relatively low 52.2 km3a−1 in the west region. The results of this study can provide methods for water management and policy–making in agricultural irrigated areas, and it can also provide a preliminary understanding of the influence of human activities on the dualistic water cycle in cropland. [ABSTRACT FROM AUTHOR]

The study examines the digital finance (DF) and regional sustainable development (RSD) across 90 cities within six major city clusters in China over the period from 2011 to 2020. By constructing an evaluation index system for DF and RSD, we employed the entropy value method to assess their levels, and the coupling coordination degree (CCD) model to evaluate their interplay. Our analysis extended to temporal and spatial disparities, distribution dynamics, and the convergence of CCD through kernel density estimation, Markov chain analysis, σ -convergence, and β -convergence techniques. The results indicate a consistent upward trend in CCD, yet it remains at a low level with pronounced regional disparities and temporal characteristics. The kernel density distribution's central tendency has shifted rightward progressively, albeit with a decelerating pace annually. The Markov transition probability matrix suggests a stable CCD across various levels, hinting at "club convergence". Furthermore, both σ -convergence and β -convergence analyses reveal significant convergence trends in CCD, enhanced by economic growth factors. Using the Quadratic Assignment Procedure (QAP) method, we found that regional economic growth disparities significantly influence the CCD's regional variances. [ABSTRACT FROM AUTHOR]

Governance quality refers to how well the processes and institutions of public governance function and is widely recognized as having an important influence on human well-being. We developed and tested a theoretical model that elucidates the relationship between governance quality and the subjective well-being of residents in China by revealing the serial mediation effects of perceived social fairness and trust in government. Using data from the nationally representative Chinese Social Survey conducted in 2021 (n = 5019), we performed structural equation modeling to empirically examine our hypotheses. The results indicated that governance quality exerted a significant positive fully indirect impact on subjective well-being through perceived social fairness, trust in government, and their serial mediation effects. This study contributes to the literature by providing valuable insights into the determinants of subjective well-being and highlighting the serial mediating roles of perceived social fairness and trust in government in the relationship between governance quality and subjective well-being. The findings also provide practical insights for policymakers, as they indicate that promoting perceived social fairness and fostering trust in government are essential to translate governance quality into subjective well-being. [ABSTRACT FROM AUTHOR]

This study, leveraging search engine data, investigates the dynamics of China's domestic tourism markets in response to the August 2022 epidemic outbreak in Xinjiang. It focuses on understanding the reaction mechanisms of tourist-origin markets during destination crises in the post-pandemic phase. Notably, the research identifies a continuous rise in the potential tourism demand from tourist origin cities, despite the challenges posed by the epidemic. Further analysis uncovers a regional disparity in the growth of tourism demand, primarily influenced by the economic stratification of origin markets. Additionally, the study examines key tourism attractions such as Duku Road, highlighting its resilient competitive system, which consists of distinctive tourism experiences, economically robust tourist origins, diverse tourist markets, and spatial pattern stability driven by economic factors in source cities, illustrating an adaptive response to external challenges such as crises. The findings provide new insights into the dynamics of tourism demand, offering a foundation for developing strategies to bolster destination resilience and competitiveness in times of health crises. [ABSTRACT FROM AUTHOR]

With the progression of many shale gas wells in the Sichuan-Chongqing region of China into the middle and late stages of exploitation, the problem of sand production in these wells is a primary factor influencing production. Failure to implement measures to remove sand from the gas wells will lead to a sharp decline in production after a certain period of exploitation. Moreover, As the amount of sand produced in the well increases, the production layer will be potentially buried by sand. To boost the production of shale gas wells in the Sichuan-Chongqing region and improve production efficiency, a novel downhole jet sand-washing device has been developed. Upon analyzing the device's overall structure, it is revealed that the device adopts a structural design integrating a jet pump with an efficient sand- washing nozzle, providing dual capabilities for jet sand- washing and sand conveying via negative pressure. To enhance the sand- washing and unblocking performance of the device, various sand- washing fluids and the structures of different sand- washing nozzles are compared for selection, aiming to elevate the device's sand- washing and unblocking performance from a macro perspective. Subsequently, drawing on simulation and internal flow field analysis of the device's sand- washing and unblocking process through CFD and the control variable method, it is ultimately found that the length diameter ratio of the cylindrical segment of the nozzle outlet, the outlet diameter, and the contraction angle of the nozzle greatly influence the device's sand- washing and unblocking performance. And the optimum ranges for the length-diameter ratio of the cylindrical segment of the nozzle outlet, the outlet diameter, the contraction angle of the nozzle, and the inlet diameter are 2 to 4, 6 mm to 10 mm, 12° to 16°, and 18 mm and 22 mm, respectively. The findings of the research not only provide new insights into existing sand removal processes but also offer a novel structure for current downhole sand removal devices and a specific range for the optimal size of the nozzle. [ABSTRACT FROM AUTHOR]

Confronted with the concurrent challenges of economic advancement and environmental management, this study explores whether implementing Intellectual Property Demonstration Policies (IPDP) can be a covert force in enhancing carbon emission efficiency. Utilizing panel data from 280 prefecture-level cities in China over the period 2007–2019, we employ a quasi-natural experimental design, incorporating multiple-period difference-in-differences models, mediation effect models, and spatial Durbin difference-in-differences models to assess the impacts of IPDP on carbon emission efficiency, its mechanisms of action, and its spatial spillover effects. The regression results of the multi-period difference-in-differences model reveal a statistically significant enhancement in carbon emission efficiency due to IPDP, with an impact coefficient of 0.044. Through heterogeneity tests, it is observed that the influence of IPDP on carbon emission efficiency varies based on regional characteristics, carbon emission levels, and the extent of marketization. The mediation effect model demonstrates that IPDP enhances carbon emission efficiency by fostering green technological innovation and facilitating the transformation of industrial structures. Furthermore, the spatial Durbin difference-in-differences model illustrates that IPDP positively influences the carbon emission efficiency of neighboring regions, indicating favorable spatial spillover effects. Notably, the indirect effect coefficients in the geographical distance matrix, economic distance matrix, and economic-geographical nested matrix are calculated as 0.673, 0.250, and 0.386, respectively. These findings offer compelling theoretical and empirical support for strengthening the intellectual property framework to optimize its environmental impact. [ABSTRACT FROM AUTHOR]

Within the global architecture, engineering, and construction industry, the use of Building Information Modeling (BIM) technology has significantly expanded. However, given the unique characteristics of road infrastructure, the application of BIM technology is still being explored. This article focuses on the Yuanchen Expressway, exploring innovative applications of BIM technology in comprehensive construction management. The project employs advanced technologies, including BIM, Geographic Information Systems (GIS), and the Internet of Things (IoT), to precisely identify critical nodes and breakthroughs. Supported by a detailed BIM model and a multi-level, diversified digital management platform, the project effectively addresses construction challenges in multiple tunnels, bridges, and complex interchanges, achieving intelligent construction innovation throughout the Yuanchen Expressway with BIM technology. By guiding construction through BIM models, utilizing a BIM+GIS-based management cloud platform system, and employing VR safety briefings, the project effectively reduces the difficulty of communication and coordination in project management, shortens the project measurement cycle, improves on-site work efficiency, and ensures comprehensive control and safety management. This article provides an exemplary case for the application of full-line construction management using BIM technology in the highway sector both in China and globally, offering new perspectives and strategies for highway construction management. [ABSTRACT FROM AUTHOR]

The Taihangshan-Yanshan region (TYR) is an important ecological barrier area for Beijing-Tianjin-Hebei, and the effectiveness of its ecological restoration and protection is of great significance to the ecological security pattern of North China. Based on the FVC data from 2000 to 2021, residual analysis, parametric optimal geodetector technique (OPGD) and multi-scale geographically weighted regression analysis (MGWR) were used to clarify the the multivariate driving mechanism of the evolution of FVC in the TYR. Results show that: (1) FVC changes in the TYR show a slowly fluctuating upward trend, with an average growth rate of 0.02/10a, and a spatial pattern of "high in the northwest and low in the southeast"; more than half of the FVC increased during the 22-year period. (2) The results of residual analysis showed that the effects of temperature and precipitation on FVC were very limited, and a considerable proportion (80.80% and 76.78%) of the improved and degraded areas were influenced by other factors. (3) The results of OPGD showed that the main influencing factors of the spatial differentiation of FVC included evapotranspiration, surface temperature, land use type, nighttime light intensity, soil type, and vegetation type (q > 0.2); The explanatory rates of the two-factor interactions were greater than those of the single factor, which showed either nonlinear enhancement or bifactorial enhancement, among which, the interaction of evapotranspiration with mean air and surface temperature has the strongest effect on the spatial and temporal evolution of FVC (q = 0.75). Surface temperature between 4.98 and 10.4 °C, evapotranspiration between 638 and 762 mm/a, and nighttime light between 1.96 and 7.78 lm/m2 favoured an increase in vegetation cover, and vegetation developed on lysimetric soils was more inclined to be of high cover. (4) The correlation between each variable and FVC showed different performance, GDP, elevation, slope and FVC showed significant positive correlation in most regions, while population size, urban population proportion, GDP proportion of primary and secondary industries, and nighttime light intensity all showed negative correlation with FVC to different degrees. The results can provide data for formulating regional environmental protection and restoration policies. [ABSTRACT FROM AUTHOR]

The early diagnosis and treatment of foreign body aspiration (FBA) can significantly improve the overall prognosis of children. There are significant differences in the epidemiology and clinical characteristics of FBA in different regions. Therefore, we conducted a real-world study in the western region of China with over 4000 patients. The aim of this study was to improve the understanding of FBA in terms of its types, the specific months of its occurrence, and the distribution of primary caregiver characteristics in western China. We collected the clinical and epidemiological data of children who were diagnosed with FBA in our hospital over the past 20 years through a big data centre. We matched the data of healthy children who underwent routine physical examinations at the paediatric health clinic during the same period to analyse the differences in the data of actual guardians. A total of 4227 patients from five provinces were included in this study. Foreign bodies were removed by rigid bronchoscopy in 99.4% (4202/4227) of patients, with a median age of 19 months and a median surgical duration 16 min. January was the most common month of onset for 1725 patients, followed by February, with 1027 patients. The most common types of foreign objects were melon peanuts, seeds and walnuts, accounting for 47.2%, 15.3%, and 10.2%, respectively. In the FBA group, the proportion of grandparents who were primary caregivers was 70.33% (2973/4227), which was significantly greater than the 63.05% in the healthy group (2665/4227) (P < 0.01). FBA most commonly occurs in January and February. More than 60% of FBAs occur between the ages of 1 and 2 years, and the incidence of FBA may be greater in children who are cared for by grandparents. A rigid bronchoscope can be used to remove most aspirated foreign bodies in a median of 16 min. [ABSTRACT FROM AUTHOR]

Clematis nannophylla is a perennial shrub of Clematis with ecological, ornamental, and medicinal value, distributed in the arid and semi-arid areas of northwest China. This study successfully determined the chloroplast (cp) genome of C. nannophylla, reconstructing a phylogenetic tree of Clematis. This cp genome is 159,801 bp in length and has a typical tetrad structure, including a large single-copy, a small single-copy, and a pair of reverse repeats (IRa and IRb). It contains 133 unique genes, including 89 protein-coding, 36 tRNA, and 8 rRNA genes. Additionally, 66 simple repeat sequences, 50 dispersed repeats, and 24 tandem repeats were found; many of the dispersed and tandem repeats were between 20–30 bp and 10–20 bp, respectively, and the abundant repeats were located in the large single copy region. The cp genome was relatively conserved, especially in the IR region, where no inversion or rearrangement was observed, further revealing that the coding regions were more conserved than the noncoding regions. Phylogenetic analysis showed that C. nannophylla is more closely related to C. fruticosa and C. songorica. Our analysis provides reference data for molecular marker development, phylogenetic analysis, population studies, and cp genome processes to better utilise C. nannophylla. [ABSTRACT FROM AUTHOR]

Diffuse light is produced by clouds and aerosols in the atmosphere. Exploring the effects of diffuse light on ecosystem productivity is important for understanding the terrestrial carbon (CO2) cycle. Here, 2 years of gross ecosystem primary productivity (GEP) from a (winter) wheat cropland in China was assessed using eddy covariance technology to explore the effects of diffuse photosynthetic active radiance (PAR) on wheat GEP. Wheat GEP increased significantly and positively along with diffuse PAR. In addition, wheat GEP was significantly affected by total PAR, air temperature, and vapor press deficit in different diffuse PAR fraction (fDIF) change stages. Because significant autocorrelations existed among the controlling factors, a path analysis was used to quantify the effects of diffuse light on GEP. Diffuse PAR was the primary and secondary importance factors affecting GEP with direct path coefficients of 0.54 and 0.48, respectively, in different fDIF change stages. A multilayer canopy model revealed that the middle and lower canopy levels intercepted more light when diffuse PAR increased. This resulted in the photosynthetic enhancement of middle and lower canopy levels, which contributed approximately 65% and 35%, respectively, to the increase in photosynthesis for the entire canopy (~ 30.5%). Overall, our study provided new evidence regarding the importance of diffuse light for CO2 uptake in agroecosystems, which is important for predicting the responses of ecosystem CO2 budgets to future climate-related light changes. [ABSTRACT FROM AUTHOR]

Veronica anagallis-aquatica L. and Veronica undulata Wall. are widely used ethnomedicinal plants in China. The two species have different clinical efficacies, while their extremely similar morphology and unclear interspecific relationship make it difficult to accurately identify them, leading to increased instances of mixed usage. This article reports on the complete chloroplast genomes sequence of these two species and their related Veronica species to conduct a comparative genomics analysis and phylogenetic construction. The results showed that the chloroplast (cp) genomes of Veronica exhibited typical circular quadripartite structures, with total lengths of 149,386 to 152,319 base pairs (bp), and GC content of 37.9 to 38.1%, and the number of genes was between 129–134. The total number of simple sequence repeats (SSRs) in V. anagallis-aquatica and V. undulata is 37 and 36, while V. arvensis had the highest total number of 56, predominantly characterized by A/T single bases. The vast majority of long repeat sequence types are forward repeats and palindromic repeats. Selective Ka/Ks values showed that three genes were under positive selection. Sequence differences often occur in the non-coding regions of the large single-copy region (LSC) and small single-copy region (SSC), with the lowest sequence variation in the inverted repeat regions (IR). Seven highly variable regions (trnT-GGU-psbD, rps8-rpl16, trnQ-UUG, trnN-GUU-ndhF, petL, ycf3, and ycf1) were detected, which may be potential molecular markers for identifying V. anagallis-aquatica and V. undulata. The phylogenetic tree indicates that there is a close genetic relationship between the genera Veronica and Neopicrorhiza, and V. anagallis-aquatica and V. undulata are sister groups. The molecular clock analysis results indicate that the divergence time of Veronica may occur at ∼ 9.09 Ma, and the divergence time of these two species occurs at ∼ 0.48 Ma. It is speculated that climate change may be the cause of Veronica species diversity and promote the radiation of the genus. The chloroplast genome data of nine Veronica specie provides important insights into the characteristics and evolution of the chloroplast genome of this genus, as well as the phylogenetic relationships of the genus Veronica. [ABSTRACT FROM AUTHOR]

China, is characterized by its remarkable ethnical diversity, which necessitates whole genome variation data from multiple populations as crucial tools for advancing population genetics and precision medical research. However, there has been a scarcity of research concentrating on the whole genome of ethnic minority groups. To fill this gap, we developed the Guizhou Multi-ethnic Genome Database (GMGD). It comprises whole genome sequencing data from 476 healthy unrelated individuals spanning 11 ethnic minorities groups in Guizhou Province, Southwest China, including Bouyei, Dong, Miao, Yi, Bai, Gelo, Zhuang, Tujia, Yao, Hui, and Sui. The GMGD database comprises more than 16.33 million variants in GRCh38 and 16.20 million variants in GRCh37. Among these, approximately 11.9% (1,956,322) of the variants in GRCh38 and 18.5% (3,009,431) of the variants in GRCh37 are entirely new and do not exist in the dbSNP database. These novel variants shed light on the genetic diversity landscape across these populations, providing valuable insights with an average coverage of 5.5 ×. This makes GMGD the largest genome-wide database encompassing the most diverse ethnic groups to date. The GMGD interactive interface facilitates researchers with multi-dimensional mutation search methods and displays population frequency differences among global populations. Furthermore, GMGD is equipped with a genotype-imputation function, enabling enhanced capabilities for low-depth genomic research or targeted region capture studies. GMGD offers unique insights into the genomic variation landscape of different ethnic groups, which are freely accessible at https://db.cngb.org/pop/gmgd/. [ABSTRACT FROM AUTHOR]