Search

To investigate the flow characteristics in front chamber and rear chamber in pump mode and pump as turbine mode, a 3D computational model of a centrifugal pump was established, including the front and rear chamber. Based on Realizable k-ε turbulence model, numerical calculations of incompressible flow were carried out for internal viscous flow in two operating modes. Further analysis was conducted on the flow stability and hydraulic losses under two modes using energy gradient theory and entropy production theory. The numerical simulation results are within reasonable error compared to the experimental results in pump operation mode, which ensures the reliability of the numerical calculation method. The results indicate that the volumetric efficiency in both two modes is on an upward trend with increasing flow, but the volumetric efficiency of the pump mode is more significantly affected by changes in flow; the distribution patterns of dimensionless circumferential velocity and dimensionless radial velocity in the front and rear chambers under two operating modes are similar, but the distribution pattern of dimensionless radial velocity in the front chamber in turbine mode is significantly different from other operating conditions; flow instability is most likely to occur at the outlet of impeller, and the energy loss in clearance of wear-rings is greater than that in the pump chamber. [ABSTRACT FROM AUTHOR]

Using the unsteady Bernoulli equation for the piping system and the angular momentum equation for the rotor, derives here a theoretical model to predict the startup performance of a pump as turbine (PAT). This model is effective for predicting the instantaneous evolution characteristics of the main performance parameters of PAT during startup, and these changings are initially faster and then slowly as a whole. The effect of the rotor moment of inertia and the final stabilized rotational speed of PAT on evolution characteristics of parameters is opposite. The rotational speed, head, hydraulic power, and conversion efficiency show a upward rising trend with the startup time, whereas the flow rate and hydraulic head loss display a downward trend. [ABSTRACT FROM AUTHOR]

In order to improve the efficiency of the self-priming pump in the outdoor emergency rescue mobile pump truck, this paper took the key energy conversion component-impeller as the target and used the orthogonal experimental design method to optimize its hydraulic performance. Firstly the numerical calculations were compared with the experimental results to confirm the reliability of the calculation method. Then, L9 (34) orthogonal design was applied to investigate the influence of the impeller diameter, the blade outlet width, the blade wrap angle and the number of blades on the hydraulic performance of the self-priming pump. Through range analysis, the order of influence of each influencing factor on the head and efficiency of the self-priming pump was determined, and finally obtained the optimal parameter combination scheme. The results show that the optimized self-priming pump exceeds the head of the prototype pump at all flow conditions, and the efficiency curve at high flow conditions is significantly improved and has a wide high efficiency zone. [ABSTRACT FROM AUTHOR]

To study the effect of the width-to-narrow ratio on the forward and reverse flow characteristics of the Tesla valve, five different models of the Tesla valve with different width-to-narrow ratios are established in this paper. The numerical calculations of forward and reverse flow under different working conditions are carried out by the CFD method in the laminar flow regime, and the reliability of the numerical calculation method is verified by comparing it with the experimental results. The results show that: in forward flow, the main flow-through channel is not related to the width-to-narrow ratio, the flow rate of the straight channel increases with the increase of the width-to-narrow ratio, and the static pressure in the diversion section is in the shape of "∞"; while in reverse flow, the main flow-through channel is weakly related to the width-to-narrow ratio, the flow rate of the arc channel is not increased with the increase of the width-to-narrow ratio, and the static pressure in the diversion section is in the shape of "bench". As the width-to-narrow ratio decreases, the pressure drop during forward and reverse flow becomes more significant. [ABSTRACT FROM AUTHOR]

In order to reveal the influence of starting acceleration on starting process of a pump as turbine system, this paper carries out a numerical calculation of the three-dimensional viscous unsteady flow of pump as turbine circulating piping system under three starting acceleration conditions, and obtains the external and internal flow characteristics of each overflow component during the starting process, and also analyzes the energy loss of each component in the piping system in depth with the help of entropy production method and Q criterion method. The results show that during system start-up, the flow rate and outlet static pressure curves of the pump as turbine are hysteresis relative to the rotational speed, the head curve is similar to a linear rise during slow and medium speed start-up, while it shows a parabolic rise during rapid start-up, the entropy production and vorticity in the impeller domain of the pump as turbine are mainly distributed between the blades, and the distribution decreases during start-up. In addition, the pump similarity law does not apply to the performance prediction during the transient start of the pump as turbine. [ABSTRACT FROM AUTHOR]

The ventilation work is an important step to be completed before the start of the positive pressure explosion-proof robot. The existing explosion-proof technology uses constant pressure inflation, which will cause explosive gas to accumulate in the corner area of the cavity for a long time. In order to solve this problem, a ventilation method with periodic pulse intake is proposed. Based on the finite element method, the cleaning and ventilation process of the positive pressure explosion-proof robot is simulated and analyzed. The concentration of explosive gas in the robot cavity with time under constant pressure intake and pulse intake with different periods and amplitudes is compared. The simulation results show that the pulse intake is beneficial to the ventilation of the corner position. The period and amplitude of the pulse intake has an effect on the ventilation efficiency, when the period is the same, the greater the amplitude of the pulse intake, the higher the ventilation efficiency; when the amplitude is the same, the smaller the period of the pulse intake, the higher the ventilation efficiency. After experimental verification, the validity of the simulation results is proved. This study helps to improve the ventilation efficiency of positive-pressure explosion-proof robots and provides guidance for practical applications. [ABSTRACT FROM AUTHOR]

Nanoparticles are widely used in biomedical applications and cancer treatments due to their minute scale, multi-function, and long retention time. Among the various nanoparticles, the unique optical property derived from the localized surface plasmon resonance effect of metallic nanoparticles is a primary reason that metallic nanoparticles are researched and applied. Copper and Iron nanoparticles have the potential to generate hydroxyl radicals in excess H2O2 via Fenton or Fenton-like reactions. On the other hand, gold nanoparticles equipped with a photosensitizer can transfer the energy of photons to chemical energy and enhance the production of singlet oxygen, which is suitable for cancer treatment. With the actions of these two reactive oxygen species in the tumor microenvironment, cell apoptosis can further be induced. In this work, we first synthesized dual metal nanoparticles with poly[styrene-alt-(maleic acid, sodium salt)(Cu ferrite oxide-polymer) by a simple one-step hydrothermal reduction reaction. Then, gold(III) was reduced and doped into the structure, which formed a triple metal structure, Au-doped Cu ferrite nanoparticles (Au/Cu ferrite oxide-polymer NPs). The metal ratio of the product could be controlled by manipulating the Fe/Cu ratio of reactants and the sequence of addition of reactants. The core–shell structure was verified by transmission electron microscopy. Moreover, the hydroxyl radical and singlet oxygen generation ability of Au/Cu ferrite oxide-polymer was proved. The chemodynamic and photodynamic effect was measured, and the in vitro ROS generation was observed. Furthermore, the behavior of endocytosis by cancer cells could be controlled by the magnetic field. The result indicated that Au/Cu ferrite oxide-polymer core–shell nanoreactor is a potential agent for chemodynamic/photodynamic synergetic therapy. [ABSTRACT FROM AUTHOR]

Therefore, the wording of the Methods, subsection "Construct drug similarity network based on side effects" closely resembles the method description in Reference 57 designed for symptom-based similarity detection, but this reference was not cited in this section. To construct drug similarity network based on side effects, the Authors used the data and the method reported by Zhou et al. whose paper is cited as Reference 57 in the Article. [Extracted from the article]

Climate change and disease threaten shrimp farming. Here, we studied the beneficial properties of a phytogenic formulation, Shrimp Best (SB), in whiteleg shrimp. Functional studies showed that SB dose-dependently increased shrimp body weight and decreased feed conversion ratio. We found that SB protected against Vibrio parahaemolyticus as evidenced by survival rate, bacterial load, and hepatopancreatic pathology in shrimp. Finally, we explored the likely mechanism by which SB affects growth performance and vibriosis in shrimp. The 16S rRNA sequencing data showed that SB increased 6 probiotic genera and decreased 6 genera of pathogenic bacteria in shrimp. Among these, SB increased the proportion of Lactobacillus johnsonii and decreased that of V. parahaemolyticus in shrimp guts. To dissect the relationship among SB, Lactobacillus and Vibrio, we investigated the in vitro regulation of Lactobacillus and Vibrio by SB. SB at ≥ 0.25 μg/mL promoted L. johnsonii growth. Additionally, L. johnsonii and its supernatant could inhibit V. parahaemolyticus. Furthermore, SB could up-regulate five anti-Vibrio metabolites of L. johnsonii, which caused bacterial membrane destruction. In parallel, we identified 3 fatty acids as active compounds from SB. Overall, this work demonstrated that SB improved growth performance and vibriosis protection in shrimp via the regulation of gut microbiota. [ABSTRACT FROM AUTHOR]

Enterovirus A71 (EV-A71) is an emerging enterovirus that can cause neurological complications. Enhanced serum IL-1β levels were observed in EV-A71 patients with severe neurological symptoms. However, the roles of sensors in enterovirus-induced IL-1β production are unclear. In this study, we identified that pattern recognition receptors, including RIG-I, TLR3, and TLR8, are implicated in EV-A71-triggered IL-1β release in human macrophages. EV-A71 infection results in caspase-1 and caspase-8, which act as regulators of EV-A71-induced NLRP3 and RIG-I inflammasome activation. Moreover, knockdown of the expression of TLR3 and TLR8 decreased the released IL-1β in an NLRP3-dependent manner. Since TLR3 and TLR8 ligands promote NLRP3 inflammasome activation via caspase-8, the alternative pathway may be involved. In summary, these results indicate that activation of the NLRP3 and RIG-I inflammasomes in EV-A71-infected macrophages is mediated by caspase-1 and caspase-8 and affected by TLRs, including TLR3 and TLR8. [ABSTRACT FROM AUTHOR]

The automatic segmentation of the lung region for chest X-ray (CXR) can help doctors diagnose many lung diseases. However, extreme lung shape changes and fuzzy lung regions caused by serious lung diseases may incorrectly make the automatic lung segmentation model. We improved the U-Net network by using the pre-training Efficientnet-b4 as the encoder and the Residual block and the LeakyReLU activation function in the decoder. The network can extract Lung field features efficiently and avoid the gradient instability caused by the multiplication effect in gradient backpropagation. Compared with the traditional U-Net model, our method improves about 2.5% dice coefficient and 6% Jaccard Index for the two benchmark lung segmentation datasets. Our model improves about 5% dice coefficient and 9% Jaccard Index for the private lung segmentation datasets compared with the traditional U-Net model. Comparative experiments show that our method can improve the accuracy of lung segmentation of CXR images and it has a lower standard deviation and good robustness. [ABSTRACT FROM AUTHOR]