Search

The temperature dependent thermophysical fluid properties have numerous aspects in different industries and engineering processes in which heat transmission is based on fluid flow. For such heat transmission processes, heat transmission system is highly fluctuated with variation of viscosity. Thus, the aim of this study is to investigate the transfer of heat in magnetized Carreau fluid with chemical reaction and under influence of thermal radiation over nonlinear stretching/shrinking surface. Additionally, we have incorporated variable heat dependent thermophysical properties to analyze the heat transfer in magnetized Carreau fluid. Set of flow governing non linear PDE's are obtained using Carreau fluid tensor and boundary layer approximation (BLA) theory. Dimensionless set of ODE's are obtained using suitable similarity transforms. Shooting method in conjunction with Newton's method have been utilized to solve the problem. It is noted that when stretching B ≥ 0 is significant with strictly increasing mass suction S shear stress rate increase with minor levels and sharp increase has been observed in Nusselt number, whereas in shrinking case B < 0 shear stress and heat transfer coefficient values are improved raising the value of S mass suction. Further, raising the values of power law index n produce reduced skin friction over stretching surface B ≥ 0 while skin friction dramatically enhance in shrinking case B < 0 . It is observed that raising the non-linearity m values for stretching or shrinking, skin friction and Nusselt number considerably improved. Moreover, computational outcomes of the study are validated with already published previous results and the results obtained in this study are found in good agreement. [ABSTRACT FROM AUTHOR]

Due to enhanced heat transfer rate, the nanofluid and hybrid nanofluids have significant industrial uses. The principal objective of this exploration is to investigate how thermal radiation influences the velocity and temperature profile. A water-based rotational nanofluid flow with constant angular speed Ω is considered for this comparative study. A similarity conversion is applied to change the appearing equations into ODEs. Three different nanoparticles i.e., copper, aluminum, and titanium oxide are used to prepare different nanofluids for comparison. The numerical and graphical outputs are gained by employing the bvp-4c procedure in MATLAB. The results for different constraints are represented through graphs and tables. Higher heat transmission rate and minimized skin friction are noted for triple nanoparticle nanofluid. Skin coefficients in the x-direction and y-direction have reduced by 50% in trihybrid nanofluid by keeping mixed convection levels between the range 3 < ϵ ≤ 11 . The heat transmission coefficient with raising the levels of thermal radiation between 0.5 < π ≤ 0.9 and Prandlt number 7 < Pr ≤ 11 has shown a 60% increase. [ABSTRACT FROM AUTHOR]

Due to enhanced heat transfer rate, the nanofluid and hybrid nanofluids have significant industrial uses. The principal objective of this exploration is to investigate how thermal radiation influences the velocity and temperature profile. A water-based rotational nanofluid flow with constant angular speed Ω is considered for this comparative study. A similarity conversion is applied to change the appearing equations into ODEs. Three different nanoparticles i.e., copper, aluminum, and titanium oxide are used to prepare different nanofluids for comparison. The numerical and graphical outputs are gained by employing the bvp-4c procedure in MATLAB. The results for different constraints are represented through graphs and tables. Higher heat transmission rate and minimized skin friction are noted for triple nanoparticle nanofluid. Skin coefficients in the x-direction and y-direction have reduced by 50% in trihybrid nanofluid by keeping mixed convection levels between the range 3 < ϵ ≤ 11 . The heat transmission coefficient with raising the levels of thermal radiation between 0.5 < π ≤ 0.9 and Prandlt number 7 < Pr ≤ 11 has shown a 60% increase. [ABSTRACT FROM AUTHOR]

In this research, we have considered the convective heat transfer analysis on peristaltic flow of Rabinowitsch fluid through an elliptical cross section duct. The Pseudoplastic and Dilatant characteristics of non-Newtonian fluid flow are analyzed in detail. The Rabinowitsch fluid model shows Pseudoplastic fluid nature for σ > 0 and Dilatant fluid behaviour for σ < 0. The governing equations are transformed to dimensionless form after substituting pertinent parameters and by applying the long wavelength approximation. The non-dimensional momentum and energy equations are solved analytically to obtain the exact velocity and exact temperature solutions of the flow. A novel polynomial of order six having ten constants is introduced first time in this study to solve the energy equation exactly for Rabinowitsch fluid flow through an elliptic domain. The analytically acquired solutions are studied graphically for the effective analysis of the flow. The flow is found to diminish quickly in the surrounding conduit boundary for Dilatant fluid as compared to the Pseudoplastic fluid. The temperature depicted the opposite nature for Pseudoplastic and Dilatant fluids. The flow is examined to plot the streamlines for both Pseudoplastic and Dilatant fluids by rising the flow rate. [ABSTRACT FROM AUTHOR]