Search

Intelligent computing is transforming safety inspection methods and response strategies in coal mines. Due to the significant safety hazards associated with mining excavation, this study proposes a multi-source data based predictive model for assessing gas risk and implementing countermeasures. By examining the patterns of gas dispersion at the longwall face, utilizing both temporal and spatial correlation, a predictive model is crafted that incorporates safety thresholds for gas concentrations, four-level early warning method and response strategy are devised by integrating weighted predictive confidence with these correlations. Initially tested using a public dataset from Poland, this method was later verified in coal mine in China. This paper discusses the validity and correlation of multi-source monitoring data in temporal and spatial correlation and proposes a risk warning mechanism based on it, which can be applied not only for safety warning but also for regulatory management. [ABSTRACT FROM AUTHOR]

Longwall top coal caving technology is one of the main methods of thick coal seam mining in China, and the classification evaluation of top coal cavability in longwall top coal caving working face is of great significance for improving coal recovery. However, the empirical or numerical simulation method currently used to evaluate the top coal cavability has high cost and low-efficiency problems. Therefore, in order to improve the evaluation efficiency and reduce evaluation the cost of top coal cavability, according to the characteristics of classification evaluation of top coal cavability, this paper improved and optimized the fuzzy neural network developed by Nauck and Kruse and establishes the fuzzy neural network prediction model for classification evaluation of top coal cavability. At the same time, in order to ensure that the optimized and improved fuzzy neural network has the ability of global approximation that a neural network should have, its global approximation is verified. Then use the data in the database of published papers from CNKI as sample data to train, verify and test the established fuzzy neural network model. After that, the tested model is applied to the classification evaluation of the top coal cavability in 61,107 longwall top coal caving working face in Liuwan Coal Mine. The final evaluation result is that the top coal cavability grade of the 61,107 longwall top coal caving working face in Liuwan Coal Mine is grade II, consistent with the engineering practice. [ABSTRACT FROM AUTHOR]

Since the western region of China, which is typical of extraordinary resource endowments, has gradually emerged as the major mining zone in China, the mining of thick coal seams and roadways with coal-rock composite roof have become more and more common in this region. However, it is extremely difficult to realize safe and effective maintenance and control of such roadways due to the differences in natural endowments of coal-rock masses. With the roadway with coal-rock composite roof of Hulusu Coal Mine in western China as the engineering background, experiment research on large-scale similarity model was conducted through comprehensive measures such as the pneumatic loading system, the surrounding rock stress monitoring system, the roadway deformation monitoring system, the bolt load monitoring system, and the displacement field monitoring system in this paper. According to the results of the experiment, the control effects of the three support systems on the roadway with coal-rock composite roof were significantly different. When the single support of short anchor bolts was applied, the comparatively low initial anchor-hold failed to constrain the initial micro deformation of the roof. Consequently, wide-range fractures of the roof were triggered at a loading pressure of 0.8 MPa. In the meanwhile, the deep surrounding rocks witnessed a downward inflection point in stress, accompanied by the possibility of the collapse of the thin-layer anchorage zone at any time. As for the support combining both short anchor bolts and long anchor cables, though a reinforced effect on the bolt anchorage zone could be achieved with the help of the cables, the active reinforcement capacity of the bolt was limited. The bolt anchorage zone was the first to be damaged at a loading pressure of 0.9 MPa, which would subsequently affect the effective bearing capacity of the deep surrounding rocks. In the application of the single support of high-strength long anchor bolts, the long bolts with high pre-tightening force were able to lock multiple groups of coal-rock strata to form a thick-layer anchorage bearing structure capable of withstanding a load as high as 1.0 MPa. The crash and collapse of the coal wall eventually caused the subsidence of the roof. Based on the intense dynamic load experiment and the feedbacks of engineering application outcomes in the field, it was concluded that the high-pretension thick-layer (HPTL) anchoring technology can effectively constrain the deformation of roadways with coal-rock composite roof with favorable application outcomes. [ABSTRACT FROM AUTHOR]

The study of water-conducting fracture zone development height is key to the scientific prevention and control of water damage in mines. Based on the geological conditions of the Wenjiapo coal mine in Binchang, China, this paper investigates the development of water-conducting fracture zone in overlying bedrock during mining under large buried depth and huge thick aquifer by combining on-site well-location microseismic monitoring and laboratory similar material simulation. To overcome the limitation of the " limited outlook " of water-conducting fracture zone investigation, the spatial development characteristics of roof fissures in coal seam mining were determined by on-site " the underground - ground" combined microseismic monitoring and follow-up monitoring, and the development of overlying rock fracture under the large depth of burial was concluded. The fractures were mainly distributed in the upper part of the protective coal pillar on both sides of the working face, but less in the upper part of the working face, and primarily distributed in the protective coal pillar on the side of the working face and the adjacent mining area. To verify the accuracy of the conclusion, the overlying bedrock movement and deformation characteristics and the development process of the hydraulic fracture zone during coal seam mining were analyzed by simulating similar materials in the laboratory, using the monitored area as a prototype. The results show that the development height of the mining fracture zone obtained from microseismic monitoring is basically consistent with the simulation results of similar materials. The research finding have significant implications for the study of fracture distribution characteristics and the evolution law of mining overburden, and provide a foundation for scientific prevention and control of water damage on the roof. [ABSTRACT FROM AUTHOR]

Deep coal seam mining often leads to water resource loss due to bedrock water entering the workings of the mine and is discharged adjacent to the mining area. Using the geological conditions of the Maiduoshan coal mine, this paper applied a physical simulation experiment. The specified rock above the coal seam was hydraulically fractured in advance to form a postmining grouted fracture network, followed by grouting to construct a flexible isolation layer that blocked the infiltration of groundwater from the aquifer into the water-conducting fracture zone. Stress sensors, flow sensors and strata displacement monitoring technology were deployed inside the experimental material to study the spatial distribution characteristics and evolution law of the water-conducting fracture zone in the overlying rocks. Analysis of the water-conducting fracture zone development law, stress variation, overburden evolution characteristics, fracturing and grouting sequence of the flexible isolation layer and the effect of postmining grouting on the water barrier was conducted. These experiments verified the feasibility of fracture and grouting of the flexible isolation layer. These research results will provide practical guidance for the transition from the current safe and efficient mining methods to safe and green mining methods of deep coal mining in the western mining areas of China. [ABSTRACT FROM AUTHOR]

Height identification of water-permeable fractured zone (WPFZ) is one of the decisive influence factors for mining safety, especially in some specific conditions, such as mining under aquifer. In order to demonstrate the formation process of the WPFZ, the scaling model experiment is carried out. Through the analysis of movement and breaking in overlying strata, the WPFZ height is significantly affected by mining range, movement characteristics of key strata and its follow-up strata. Based on the research findings, a new theoretical method, " overlying strata synchronous movement method " (OSSM) is established to predict the WPFZ height. Taking 3301 mining face of Zhujiamao Coal Mine in China as the engineering background, the WPFZ height is estimated by OSSM. Additionally, the field detection is carried out by the downhole segmented water injection method combined with borehole camera method. By comparing the results of different methods, the accuracy of OSSM is verified and the WPFZ height is determined finally. What´s more, various methods for determining WPFZ height are evaluated. [ABSTRACT FROM AUTHOR]