Search

We investigated a state-of-the-art algorithm for 3D reconstruction with a pair-matching technique, which enabled the fabrication of individualized implant restorations in the esthetic zone. This method compared 3D mirror images of crowns and emergence profiles between symmetric tooth pairs in the anterior maxilla using digital slicewise DICOM segmentation and the superimposition of STL data. With the outline extraction of each segment provided by 100 patients, the Hausdorff distance (HD) between two point sets was calculated to identify the similarity of the sets. By using HD thresholds as a pair matching criterion, the true positive rates of crowns were 100, 98, and 98%, while the false negative rates were 0, 2, and 2% for central incisors, lateral incisors, and canines, respectively, indicating high pair matching accuracy (> 99%) and sensitivity (> 98%). The true positive rates of emergence profiles were 99, 100, and 98%, while the false negative rates were 1, 0, and 2% for central incisors, lateral incisors, and canines, respectively, indicating high pair matching accuracy (> 99%) and sensitivity (> 98%). Therefore, digitally flipped contours of crown and emergence profiles can be successfully transferred for implant reconstruction in the maxillary anterior region to optimize esthetics and function.

Microfluidics offers promising methods for aligning cells in physiologically relevant configurations to recapitulate human organ functionality. Specifically, microstructures within microfluidic devices facilitate 3D cell culture by guiding hydrogel precursors containing cells. Conventional approaches utilize capillary forces of hydrogel precursors to guide fluid flow into desired areas of high wettability. These methods, however, require complicated fabrication processes and subtle loading protocols, thus limiting device throughput and experimental yield. Here, we present a swift and robust hydrogel patterning technique for 3D cell culture, where preloaded hydrogel solution in a microfluidic device is aspirated while only leaving a portion of the solution in desired channels. The device is designed such that differing critical capillary pressure conditions are established over the interfaces of the loaded hydrogel solution, which leads to controlled removal of the solution during aspiration. A proposed theoretical model of capillary pressure conditions provides physical insights to inform generalized design rules for device structures. We demonstrate formation of multiple, discontinuous hollow channels with a single aspiration. Then we test vasculogenic capacity of various cell types using a microfluidic device obtained by our technique to illustrate its capabilities as a viable micro-manufacturing scheme for high-throughput cellular co-culture.

Animals are capable of using visual cues to find the correct route during navigation. These visual cues, which contain spatial information on the direction towards the goal point, are perceived either allocentrically or egocentrically. In this study, we examined how navigating with these two types of visual cues affects the learning processes of rodents. To present egocentrically-stable spatial cues, we devised a head-mounted device that provided discriminative orientation cues that indicated the correct choice at a fork within a double Y-maze. For allocentrically-stable spatial cues, LEDs serving as external route-mark cues were attached to the walls of the double Y-maze and illuminated to indicate the correct pathway. To rule out the possibility of the mice using extra-maze cues, we rotated the entire maze and used different start and goal sites for every trial. Our results revealed that mice using egocentric cues and external route-mark cues both showed a sigmoidal learning process for spatial navigation and that external route mark-based learning, surprisingly, learned faster than egocentric stimulus-based learning in egocentric space.

To determine the value of susceptibility-weighted imaging (SWI) for collateral estimation and for predicting functional outcomes after acute ischemic stroke. To identify independent predictors of favorable functional outcomes, age, sex, risk factors, baseline National Institutes of Health Stroke Scale (NIHSS) score, baseline diffusion-weighted imaging (DWI) lesion volume, site of steno-occlusion, SWI collateral grade, mode of treatment, and successful reperfusion were evaluated by multiple logistic regression analyses. A total of 152 participants were evaluated. A younger age (adjusted odds ratio (aOR), 0.42; 95% confidence interval (CI) 0.34 to 0.77; P P = 0.02), a smaller baseline DWI lesion volume (aOR 0.83; 95% CI 0.73 to 0.96; P = 0.01), an intermediate collateral grade (aOR 9.49; 95% CI 1.36 to 66.38; P = 0.02), a good collateral grade (aOR 6.22; 95% CI 1.16 to 33.24; P = 0.03), and successful reperfusion (aOR 5.84; 95% CI 2.08 to 16.42; P = 0.001) were independently associated with a favorable functional outcome. There was a linear association between the SWI collateral grades and functional outcome (P = 0.008). Collateral estimation using the prominent vessel sign on SWI is clinically reliable, as it has prognostic value.

This study aimed to investigate the incidence of mastoid effusion on temporal bone magnetic resonance imaging (MRI) in patients with Bell’s palsy (BP) and Ramsay Hunt syndrome (RHS), and evaluate the usefulness of mastoid effusion in early differential diagnosis between BP and RHS. The incidence of mastoid effusion on 3.0 T—temporal bone MRI, which was conducted within 10 days after the onset of acute facial nerve palsy, was compared between 131 patients with BP and 33 patients with RHS. Findings of mastoid cavity on temporal bone MRI were classified into three groups as normal mastoid, mastoid effusion, and sclerotic change, and the incidence of ipsilesional mastoid effusion was significantly higher in RHS than BP (P

Periodontitis is initiated by causative bacteria in the gingival sulcus. However, as the lesion is often deep and out of circulation system and biofilm is frequently formed on the bacteria cluster, use of antibacterial agents has been limited and the invasive method such as curettage is thought as an only treatment. Here we designed non-invasive photodynamic therapy (PDT), with the ointment which leads a photosensitizer deliverable into gingival sulcus. We assessed whether 650 nm light-emitting-diode (LED) penetrates the 3-mm soft tissue and effectively activates a photosensitizer toluidine-blue-O (TBO) through the thickness to remove Porphyromonas gingivalis and Fusobacterium nucleatum species. The oral ointment formulation was optimized to efficiently deliver the photosensitizer into gingival sulcus and its efficacy of PDT was evaluated in in vitro and in vivo models. Four weeks of TBO-formulation mediated-PDT treatment significantly attenuated periodontitis-induced alveolar bone loss and inflammatory cytokines production in rats. These results confirm that a 650 nm LED indeed penetrates the gingiva and activates our TBO formulation which is sufficiently delivered to, and retained within, the gingival sulcus; thus, it effectively kills the bacteria that reside around the gingival sulcus. Collectively, TBO-mediated PDT using LED irradiation has potential as a safe adjunctive procedure for periodontitis treatment.

A simple, low cost, non-toxic and eco-friendly pathway for synthesizing efficient sunlight-driven tin sulfide photocatalyst was studied. SnS nanocrystals were prepared by using mechanical method. The bulk SnS was obtained by evaporation of SnS nanocrystal solution. The synthesized samples were characterized by using XRD, SEM, TEM, UV-vis, and Raman analyses. Well crystallized SnS nanocrystals were verified and the electrochemical characterization was also performed under visible light irradiation. The SnS nanocrystals have shown remarkable photocurrent density of 7.6 mA cm−2 under 100 mW cm−2 which is about 10 times larger than that of the bulk SnS under notably stable operation conditions. Furthermore, the SnS nanocrystals presented higher stability than the bulk form. The IPCE(Incident photon to current conversion efficiency) of 9.3% at 420 nm was obtained for SnS nanocrystal photoanode which is strikingly higher than that of bulk SnS, 0.78%. This work suggests that the enhancement of reacting area by using SnS nanocrystal absorbers could give rise to the improvement of photoelectrochemical cell efficiency.

Generating artificial protein assemblies with complex shapes requires a method for connecting protein components with stable and predictable structures. Currently available methods for creating rigid protein assemblies rely on either complicated calculations or extensive trial and error. We describe a simple and efficient method for connecting two proteins via a fused alpha helix that is formed by joining two preexisting helices into a single extended helix. Because the end-to-end ligation of helices does not guarantee the formation of a continuous helix, we superimposed 1–2 turns of pairs of connecting helices by using a molecular graphics program. Then, we chose amino acids from the two natural sequences that would stabilize the connecting helix. This “shared helix method” is highly efficient. All the designed proteins that could be produced in Escherichia coli were readily crystallized and had the expected fusion structures. To prove the usefulness of this method, we produced two novel repeat proteins by assembling several copies of natural or artificial proteins with alpha helices at both termini. Their crystal structures demonstrated the successful assembly of the repeating units with the intended curved shapes. We propose that this method could dramatically expand the available repertoire of natural repeat proteins.

Sorafenib (SOF; an angiogenesis inhibitor) and 2,3,5-triiodobenzoic acid (TIBA; a contrast agent for computed tomography imaging)-loaded poly(lactic-co-glycolic acid) (PLGA) microspheres (MSs) were fabricated. Embolization, drug delivery, and tracing the distribution of MSs for liver cancer therapy were accomplished with the developed MSs after their intra-arterial (IA) administration. SOF/TIBA/PLGA MSs with 24.8–28.5 µm mean diameters were prepared, and the sustained release of SOF from MSs was observed. Lower systemic exposure (represented as the area under the curve [AUC]) and maximum drug concentration in plasma (Cmax) values of the SOF/TIBA/PLGA MSs group (IA administration, 1 mg/kg) in the results of the pharmacokinetic study imply alleviated unwanted systemic effects (e.g., hand and foot syndrome), compared to the SOF solution group (oral administration, 10 mg/kg). In a rat hepatoma model, the increase of microvessel density (MVD) following arterial embolization (i.e., reactive angiogenesis) was partially limited by SOF/TIBA/PLGA MSs. This resulted in the SOF/TIBA/PLGA MSs group (IA administration, single dosing, 1 mg/kg) showing a smaller tumor size increase and viable tumor portion compared to the TIBA/PLGA MSs group. These findings suggest that a developed SOF/TIBA/PLGA MS can be a promising therapeutic system for liver cancer using a transarterial embolization strategy.