Search

The movement of the crest of a sandwave was studied using cross-sectional profiles obtained from lines of sea-bed reference stakes. Measurements were made, over a six month period, before and after flood and ebb tides in relation to both spring and neap tides and surface wave conditions. Additional observations were obtained on a daily basis, over an equinoctial neap to spring to neap tidal period, in conjunction with boundary layer flow measurements. Tracer experiments were conducted to study the dispersion of sediment from the sandwave crest. The results showed that the sandwave was relatively stable at neap tides, whilst at higher tidal ranges, the crest position oscillated with successive flood and ebb tides. Net flank erosion occurred on the less steep, upstream slope during the dominant ebb tide. This, together with increased deposition on the lee slope, caused the crest to advance, it was not possible to extrapolate sandwave migration over long periods as the tidal dynamic trends were interrupted by wind stress and surface wave activity. High particle orbital velocities, generated at the sea-bed by storm waves, caused major reductions in crestal heights. Calculated volumes of sediment eroded and accreted were used, with boundary layer flow measurements, to calculate threshold velocities for the movement of the sediment and sediment transport rates. [ABSTRACT FROM AUTHOR]

Tile following dimensionless parameters/two of them well-known and five of them new) are defined for determination of ripple mark geometry: ripple index (RI) ripple symmetry index (RSI), continuity index (CI), bifurcation index (BI), straightness index (SI), and two different parallelism indices (PI1 and PI2). In general, RI = 15 or less indicates wave or water current origin; RI = 17 or more indicates wind or swash origin. RSI = 1.5 or less indicates wave or swash types; RSI = 3 or more indicates wind or water current types. CI = 15 or more suggests wind or wave origin; CI = 10 or less suggests water current origin. BI = 10 or more suggests wave varieties; BI = 1 or less suggests wind varieties. SI = 10² or more indicates wind or deep-water wave types; SI = 15 to 10² indicates wind or wave types; SI = 4 or less indicates current types. PI1 = 7 or more suggests wave origin; PI1 = 1 or less suggests water current origin. PI2 = 0.2 or less is probably the result of wind or wave action. Longitudinal ripple marks (such as rib-and-furrow) and deformed or modified varieties (such as flat-topped tidal-flat ripple marks and nearly-flat-topped intermittent creek ripple marks) have been excluded, inasmuch as (1) they are commonly easy to identify from their appearance, and (2) they are difficult to measure with ordinary methods. Plots of two indices against each other on coordinate paper can be particularly useful; the best combinations are RI vs. RSI, and RI vs. PI1, although several other pairs are almost as good. Where all seven parameters can be obtained, the confidence one can have in the interpretation is close to 98%.