Search

Wireless Power Transfer (WPT) has become a key technology to extend network lifetime in Wireless Rechargeable Sensor Networks (WRSNs). The traditional omnidirectional recharging method has a wider range of energy radiation, but it inevitably results in more energy waste. By contrast, the directional recharging mode enables most of the energy to be focused in a predetermined direction that achieves higher recharging efficiency. However, the MC (Mobile Charger) in this mode can only supply energy to a few nodes in each direction. Thus, how to set the location of staying points of the MC, its service sequence and its charging orientation are all important issues related to the benefit of energy replenishment. To address these problems, we propose a Fuzzy Logic-based Directional Charging (FLDC) scheme for Wireless Rechargeable Sensor Networks. Firstly, the network is divided into adjacent regular hexagonal grids which are exactly the charging regions for the MC. Then, with the help of a double-layer fuzzy logic system, a priority of nodes and grids is obtained that dynamically determines the trajectory of the MC during each round of service, i.e., the charging sequence. Next, the location of the MC’s staying points is optimized to minimize the sum of charging distances between MC and nodes in the same grid. Finally, the discretized charging directions of the MC at each staying point are adjusted to further improve the charging efficiency. Simulation results show that FLDC performs well in both the charging benefit of nodes and the energy efficiency of the MC.

Implantable devices have important applications in biomedical sensor networks used for biomedical monitoring, diagnosis and treatment, etc. In this paper, an implant intra-body communication (IBC) method based on capacitive coupling has been proposed, and the modeling and characterization of this kind of IBC has been investigated. Firstly, the transfer function of the implant IBC based on capacitive coupling was derived. Secondly, the corresponding parameters of the transfer function are discussed. Finally, both measurements and simulations based on the proposed transfer function were carried out, while some important conclusions have been achieved, which indicate that the achieved transfer function and conclusions are able to help to achieve an implant communication method with the highly desirable characteristics of low power consumption, high data rate, high transmission quality, etc.

The signal transmission technology based on the human body medium offers significant advantages in Body Sensor Networks (BSNs) used for healthcare and the other related fields. In previous works we have proposed a novel signal transmission method based on the human body medium using a Mach-Zehnder electro-optical (EO) sensor. In this paper, we present a signal transmission system based on the proposed method, which consists of a transmitter, a Mach-Zehnder EO sensor and a corresponding receiving circuit. Meanwhile, in order to verify the frequency response properties and determine the suitable parameters of the developed system, in-vivo measurements have been implemented under conditions of different carrier frequencies, baseband frequencies and signal transmission paths. Results indicate that the proposed system will help to achieve reliable and high speed signal transmission of BSN based on the human body medium.

Simulation based on the finite-element (FE) method plays an important role in the investigation of intra-body communication (IBC). In this paper, a finite-element model of the whole body model used for the IBC simulation is proposed and verified, while the FE simulation of the galvanic coupling IBC with different signal transmission paths has been achieved. Firstly, a novel finite-element method for modeling the whole human body is proposed, and a FE model of the whole human body used for IBC simulation was developed. Secondly, the simulations of the galvanic coupling IBC with the different signal transmission paths were implemented. Finally, the feasibility of the proposed method was verified by using in vivo measurements within the frequency range of 10 kHz–5 MHz, whereby some important conclusions were deduced. Our results indicate that the proposed method will offer significant advantages in the investigation of the galvanic coupling intra-body communication.