Search

In this study, we investigate the potential of cold atmospheric plasma (CAP) as a non-contact excitation device, comparing its performance with an ultrasound transmitter. Utilizing a scanning Laser Doppler Vibrometer (LDV), we visualize the acoustic wavefront generated by a CAP probe and an ultrasound sensor within a designated 50 mm × 50 mm area in front of each probe. Our focus lies in assessing the applicability of a CAP probe for exciting a small polymethyl methacrylate (PMMA) sample. By adjusting the dimensions of the sample to resonate at the excitation frequency of the probe, we can achieve high vibrational velocities, enabling further mechanical analysis. In contrast with traditional vibration excitation techniques such as electrodynamical shakers and hammer impact excitation, a plasma probe can offer distinct advantages without altering the structure’s dynamics since it is contactless. Furthermore, in comparison with laser excitation, plasma excitation provides a higher power level. Additionally, while pressurized air systems are applicable for limited low frequencies, plasma probes can perform at higher frequencies. Our findings in this study suggest that CAP is comparable with acoustic excitation, indicating its potential as an effective mechanical excitation method.

The present paper comprehensively investigates the complex interaction between ultrasonic guided waves and local structural discontinuities, such as damages, through highly sensitive features: so-called wave damage interaction coefficients (WDICs). These WDICs are unique for each structural discontinuity and depend solely on their characteristics for a given structure and condition. Thus, they can be particularly useful for advanced assessment of lightweight structures in the context of non-destructive evaluation and structural health monitoring. However, the practical application of WDICs entails significant difficulties due to their sensitivity and complex patterns. Therefore, this study attempts to guide researchers and practitioners in the estimation of WDICs from numerical simulations and physical experiments. Detailed investigations are made for an aluminum host plate modified by artificial structural discontinuities, i.e., surface-bonded steel sheets. The numerical simulations are performed to predict WDICs and study sensitivities using a sophisticated finite element model. The experimental setup uses piezoelectric transducers to excite guided waves in the host plate. A single scanning laser Doppler vibrometer measures the scattered guided waves caused by the surface-bonded steel sheets, and the resulting WDICs with possible influences are investigated. In both cases, the orientation and thickness of the attached steel sheets were varied to create 12 different damage scenarios. In general, the comparison between numerical and experimental WDICs show good agreement. This underpins the applicability of the general methodology for simulating and measuring WDICs over all scenarios. Furthermore, the WDIC scattering patterns reveal a clear dependency of the peaks in the back-scattered reflections for both the numerical and experimental amplitude coefficients on the damage orientation, basically following the law of reflection. However, some discrepancies between both studies were observed. Numerical sensitivity analysis identified the adhesive layer as one reason for such differences. Additionally, misalignment errors in the experimental measurements were also found to affect WDICs. Therefore, an improved baseline subtraction method is proposed, which clearly enhances the experimental WDICs. Finally, an experimental sensitivity study of WDICs for selected sensing radii revealed only a minor influence. All these investigations were made for the amplitude as well as the phase representation of WDICs. Thus, these findings may open the way to future research and development of techniques employing WDICs for advanced applications of non-destructive evaluation and structural health monitoring.

The analysis of acoustic wave fields is important for a large number of engineering designs, communication and health-related reasons. The visualization of wavefronts gives valuable information about the type of transducers and excitation signals more suitable for the test itself. This article is dedicated to the development of a fast procedure for acoustic fields visualization in underwater conditions, by means of laser Doppler vibrometer measurements. The ultrasonic probe is a focused transducer excited by a chirp signal. The scope of this work is to evaluate experimentally the properties of the sound beam in order to get reliable information about the transducer itself to be used in many kinds of engineering tests and transducer design.

Currently, galvanometric scanning systems (like the one used in a scanning laser Doppler vibrometer) rely on a planar calibration procedure between a two-dimensional (2D) camera and the laser galvanometric scanning system to automatically aim a laser beam at a particular point on an object. In the case of nonplanar or moving objects, this calibration is not sufficiently accurate anymore. In this work, a three-dimensional (3D) calibration procedure that uses a 3D range sensor is proposed. The 3D calibration is valid for all types of objects and retains its accuracy when objects are moved between subsequent measurement campaigns. The proposed 3D calibration uses a Non-Perspective-n-Point (NPnP) problem solution. The 3D range sensor is used to calculate the position of the object under test relative to the laser galvanometric system. With this extrinsic calibration, the laser galvanometric scanning system can automatically aim a laser beam to this object. In experiments, the mean accuracy of aiming the laser beam on an object is below 10 mm for 95% of the measurements. This achieved accuracy is mainly determined by the accuracy and resolution of the 3D range sensor. The new calibration method is significantly better than the original 2D calibration method, which in our setup achieves errors below 68 mm for 95% of the measurements.