Search

A novel Mach–Zehnder Interferometer (MZI) formed by cascading two vase-shaped tapers in a single mode fiber (SMF) is proposed in this work. The vase-shaped taper is fabricated by fusion splicing a fiber sphere with a fiber tip by applying strong arc discharge. The curvature sensing characteristic of the proposed vase-shaped taper-based MZI is experimentally investigated, displaying that the interference spectrum has a blue shift with the increase of applied curvature. The sensor realizes a large range measurement of curvature from 0.9284 m −1 to 4.0470 m −1 with sensitivities of −8.41 nm/m −1 and −16.72 nm/ m −1 in the curvature range of 0.9284 m −1 to 2.4564 m −1 and 2.6025 m −1 to 4.0470 m −1 , respectively. Its temperature-curvature cross-sensitivities are −0.0021 m −1 / °C and −0.0011 m −1 / °C in the two measurement ranges, which are lower than the corresponding curvature resolutions which are 0.0024 m −1 and 0.0012 m −1 . The proposed sensor exhibits the advantages of low cost, negligible temperature cross-sensitivity, fine curvature sensitivity and large measurement scale. [ABSTRACT FROM AUTHOR]

All-fiber Mach-Zehnder interferometers (MZIs) working as curvature sensors have been attracting increasing attention. However, previously reported MZI-based curvature sensors with offset or abrupt-taper structures suffer from weak mechanical strength and low curvature sensitivity. In this letter, a robust and highly-sensitive MZI-based curvature sensor formed by cascading two up-tapers in a single mode fiber (SMF) is proposed and experimentally demonstrated. By optimizing structural parameters of the MZI both in simulation and in experiment, a high quality interference spectrum with a maximum extinction ratio (ER) of around 20 dB is obtained, which is crucial in curvature sensing with spectrum intensity variation and interference dip identifiability being considered. Experimental results show that a high curvature sensitivity of −35.41 nm/m −1 is obtained in the range of 0.6846 m −1 – 1.0606 m −1 , which is 2.4 times higher than that of the interferometer with single-mode-multimode-single-mode (SMS) structure. The two up-tapers, featured by great mechanical strength, are fabricated by only fusion pushing together a whole SMF without cleaving procedure, contributing to excellent repeatability and consistency in the sensor fabrication process. Such an all-fiber sensor exhibits advantages of simple configuration, ease of fabrication, excellent mechanical strength, low cost, and high curvature sensitivity. [ABSTRACT FROM AUTHOR]

A miniature and highly sensitive optic fiber temperature sensor using a PDMS-filled air-microbubble Fabry-Perot (FP) interferometer (PAFPI) in a hollow-core fiber (HCF) is proposed. The sensor is fabricated by fusion splicing a single mode fiber (SMF) with a HCF, which is filled with polydimethylsiloxane (PDMS) by capillary effect, to form an air microbubble cavity. As far as we know, this is the first time that PDMS is applied to fill the hollow core fiber. There are three main reflected surfaces in the PAFPI sensor, and the superimposed interference spectrum of double FPI (a thin FPI and a thick FPI) is formed. Hence, the proposed sensor combines two advantages that are the large free spectral range (FSR) of the thin FPI and the high resolution of the thick FPI, which improve the resolution of spectral demodulation while ensuring a large dynamic range. Experimental results show that the sensor has the high temperature sensitivity of 2.7035 nm/℃ with a high linear response (R-square: 0.9962) in the range of 51.2–70.5 ℃, which is almost three orders larger than that of the conventional all-fiber air-cavity FP temperature sensors (about 10 pm/℃). The stability experiment is also carried out, and the maximal variations of the wavelength shift and the extinction ratio of the interference fringes are 20.3 pm and 0.1262 dB, respectively, for a long-term testing. Therefore, it may be applied to the surrounding temperature sensing. [ABSTRACT FROM AUTHOR]