Search

SCR catalysts V 2 O 5 –WO 3 –TiO 2 (VWT) with various V 2 O 5 content (0–5 wt.%) were prepared by impregnation method in this work. Crystalline structures of the synthesized powder were analyzed by X-ray powder diffraction. Different VWT catalysts were used as sensing materials to prepare mixed potential ammonia sensors based on 5YSZ (ZrO 2 doped 5 mol% Y 2 O 3 ) solid electrolyte. The sensing electrodes were characterized by XRD and environmental scanning electron microscopy. NH 3 sensitivity was tested at 550 °C for the sensors with different V 2 O 5 content sensing electrodes. With the increment of V-content, the slope of semi-logarithmic characteristic curves increased but began to fall when V-content was more than 2 wt.%. High-contented V 2 O 5 promoted anatase TiO 2 grains growing up to be rod-shaped and block-shaped morphology in sintering, leading to the reduction of specific surface area. The decreased dispersion of V 2 O 5 , resulting from the growing up of the carrier TiO 2 , was responsible for the reduced activity of sensing electrode catalytic. The suitable content of V 2 O 5 in VWT catalysts for NH 3 sensors is 1–2 wt.% based on various factors. [ABSTRACT FROM AUTHOR]

Mixed potential ammonia sensors based on 5YSZ (ZrO 2 doped 5 mol% Y 2 O 3 ) were prepared, with ferrite CoFe 2 O 4 as sensing electrode material. Co-sintering of electrode and electrolyte has been realized. Sensors with different electrode microstructure characterized by Environmental Scanning Electron Microscope (ESEM) were made by different sintering process, and its influences on the sensors’ performance were investigated. The co-sintered sensor, with a porous three dimensional network structure electrode and great adhesion with electrolyte, exhibits the largest response (about 81 mV for 320 ppm NH 3 ) and the highest NH 3 sensitivity (55 mV/decade) with the response time (8–10 s) and recovery time (10–12 s) at 450 °C, it also shows satisfying NH 3 selectivity compared with NO x , and O 2 has few influence on the sensor responses. The enhancement of the NH 3 sensitivity may owe to the porous three dimensional network structures, which is beneficial to adsorption and diffusion of the target gas, and better bonded interface between the electrode and electrolyte also provides more quantity of triple-phase boundary (TPB). [ABSTRACT FROM AUTHOR]