Search

Extracting high-accuracy landslide areas using deep learning methods from high spatial resolution remote sensing images is a hot topic in current research. However, the existing deep learning algorithms are affected by background noise and landslide scale effects during the extraction process, leading to poor feature extraction effects. To address this issue, this paper proposes an improved mask regions-based convolutional neural network (Mask R-CNN) model to identify the landslide distribution in unmanned aerial vehicles (UAV) images. The improvement of the model mainly includes three aspects: (1) an attention mechanism of the convolutional block attention module (CBAM) is added to the backbone residual neural network (ResNet). (2) A bottom-up channel is added to the feature pyramidal network (FPN) module. (3) The region proposal network (RPN) is replaced by guided anchoring (GA-RPN). Sanming City, China was selected as the study area for the experiments. The experimental results show that the improved model has a recall of 91.4% and an accuracy of 92.6%, which is 12.9% and 10.9% higher than the original Mask R-CNN model, respectively, indicating that the improved model is more effective in landslide extraction. [ABSTRACT FROM AUTHOR]

Coronavirus disease 2019 (COVID-19), originating in China, has rapidly spread worldwide. Physicians must examine infected patients and make timely decisions to isolate them. However, completing these processes is difficult due to limited time and availability of expert radiologists, as well as limitations of the reverse-transcription polymerase chain reaction (RT-PCR) method. Deep learning, a sophisticated machine learning technique, leverages radiological imaging modalities for disease diagnosis and image classification tasks. Previous research on COVID-19 classification has encountered several limitations, including binary classification methods, single-feature modalities, small public datasets, and reliance on CT diagnostic processes. Additionally, studies have often utilized a flat structure, disregarding the hierarchical structure of pneumonia classification. This study aims to overcome these limitations by identifying pneumonia caused by COVID-19, distinguishing it from other types of pneumonia and healthy lungs using chest X-ray (CXR) images and related tabular medical data, and demonstrate the value of incorporating tabular medical data in achieving more accurate diagnoses. Resnet-based and VGG-based pre-trained convolutional neural network (CNN) models were employed to extract features, which were then combined using early fusion for the classification of eight distinct classes. We leveraged the hierarchal structure of pneumonia classification within our approach to achieve improved classification outcomes. Since an imbalanced dataset is common in this field, a variety of versions of generative adversarial networks (GANs) were used to generate synthetic data. The proposed approach tested in our private datasets of 4523 patients achieved a macro-avg F1-score of 95.9% and an F1-score of 87.5% for COVID-19 identification using a Resnet-based structure. In conclusion, in this study, we were able to create an accurate deep learning multi-modal to diagnose COVID-19 and differentiate it from other kinds of pneumonia and normal lungs, which will enhance the radiological diagnostic process. [ABSTRACT FROM AUTHOR]

Landslide susceptibility mapping (LSM) is an important decision basis for regional landslide hazard risk management, territorial spatial planning and landslide decision making. The current convolutional neural network (CNN)-based landslide susceptibility mapping models do not adequately take into account the spatial nature of texture features, and vision transformer (ViT)-based LSM models have high requirements for the amount of training data. In this study, we overcome the shortcomings of CNN and ViT by fusing these two deep learning models (bottleneck transformer network (BoTNet) and convolutional vision transformer network (ConViT)), and the fused model was used to predict the probability of landslide occurrence. First, we integrated historical landslide data and landslide evaluation factors and analysed whether there was covariance in the landslide evaluation factors. Then, the testing accuracy and generalisation ability of the CNN, ViT, BoTNet and ConViT models were compared and analysed. Finally, four landslide susceptibility mapping models were used to predict the probability of landslide occurrence in Pingwu County, Sichuan Province, China. Among them, BoTNet and ConViT had the highest accuracy, both at 87.78%, an improvement of 1.11% compared to a single model, while ConViT had the highest F1-socre at 87.64%, an improvement of 1.28% compared to a single model. The results indicate that the fusion model of CNN and ViT has better LSM performance than the single model. Meanwhile, the evaluation results of this study can be used as one of the basic tools for landslide hazard risk quantification and disaster prevention in Pingwu County. [ABSTRACT FROM AUTHOR]

Modern satellite and aerial imagery outcomes exhibit increasingly complex types of ground objects with continuous developments and changes in land resources. Single remote-sensing modality is not sufficient for the accurate and satisfactory extraction and classification of ground objects. Hyperspectral imaging has been widely used in the classification of ground objects because of its high resolution, multiple bands, and abundant spatial and spectral information. Moreover, the airborne light detection and ranging (LiDAR) point-cloud data contains unique high-precision three-dimensional (3D) spatial information, which can enrich ground object classifiers with height features that hyperspectral images do not have. Therefore, the fusion of hyperspectral image data with airborne LiDAR point-cloud data is an effective approach for ground object classification. In this paper, the effectiveness of such a fusion scheme is investigated and confirmed on an observation area in the middle parts of the Heihe River in China. By combining the characteristics of hyperspectral compact airborne spectrographic imager (CASI) data and airborne LiDAR data, we extracted a variety of features for data fusion and ground object classification. Firstly, we used the minimum noise fraction transform to reduce the dimensionality of hyperspectral CASI images. Then, spatio-spectral and textural features of these images were extracted based on the normalized vegetation index and the gray-level co-occurrence matrices. Further, canopy height features were extracted from airborne LiDAR data. Finally, a hierarchical fusion scheme was applied to the hyperspectral CASI and airborne LiDAR features, and the fused features were used to train a residual network for high-accuracy ground object classification. The experimental results showed that the overall classification accuracy was based on the proposed hierarchical-fusion multiscale dilated residual network (M-DRN), which reached an accuracy of 97.89%. This result was found to be 10.13% and 5.68% higher than those of the convolutional neural network (CNN) and the dilated residual network (DRN), respectively. Spatio-spectral and textural features of hyperspectral CASI images can complement the canopy height features of airborne LiDAR data. These complementary features can provide richer and more accurate information than individual features for ground object classification and can thus outperform features based on a single remote-sensing modality. [ABSTRACT FROM AUTHOR]

Edge intelligence (EI) has received a lot of interest because it can reduce latency, increase efficiency, and preserve privacy. More significantly, as the Internet of Things (IoT) has proliferated, billions of portable and embedded devices have been interconnected, producing zillions of gigabytes on edge networks. Thus, there is an immediate need to push AI (artificial intelligence) breakthroughs within edge networks to achieve the full promise of edge data analytics. EI solutions have supported digital technology workloads and applications from the infrastructure level to edge networks; however, there are still many challenges with the heterogeneity of computational capabilities and the spread of information sources. We propose a novel event-driven deep-learning framework, called EDL-EI (event-driven deep learning for edge intelligence), via the design of a novel event model by defining events using correlation analysis with multiple sensors in real-world settings and incorporating multi-sensor fusion techniques, a transformation method for sensor streams into images, and lightweight 2-dimensional convolutional neural network (CNN) models. To demonstrate the feasibility of the EDL-EI framework, we presented an IoT-based prototype system that we developed with multiple sensors and edge devices. To verify the proposed framework, we have a case study of air-quality scenarios based on the benchmark data provided by the USA Environmental Protection Agency for the most polluted cities in South Korea and China. We have obtained outstanding predictive accuracy (97.65% and 97.19%) from two deep-learning models on the cities' air-quality patterns. Furthermore, the air-quality changes from 2019 to 2020 have been analyzed to check the effects of the COVID-19 pandemic lockdown. [ABSTRACT FROM AUTHOR]

The green plum is rich in amino acids, lipids, inorganic salts, vitamins, and trace elements. It has high nutritional value and medicinal value and is very popular among Chinese people. However, green plums are susceptible to collisions and pests during growth, picking, storage, and transportation, causing surface defects, affecting the quality of green plums and their products and reducing their economic value. In China, defect detection and grading of green plum products are still performed manually. Traditional manual classification has low accuracy and high cost, which is far from meeting the production needs of green plum products. In order to improve the economic value of green plums and their products and improve the automation and intelligence level of the product production process, this study adopted deep learning methods based on a convolutional neural network and cost-effective computer vision technology to achieve efficient classification of green plum defects. First, a camera and LEDs were used to collect 1240 green plum images of RGB, and the green plum experimental classification standard was formulated and divided into five categories, namely, rot, spot, scar, crack, and normal. Images were randomly divided into a training set and test set, and the number of images of the training set was expanded. Then, the stochastic weight averaging (SWA) optimizer and w-softmax loss function were used to improve the VGG network, which was trained and tested to generate a green plum defect detection network model. The average recognition accuracy of green plum defects was 93.8%, the test time for each picture was 84.69 ms, the recognition rate of decay defect was 99.25%, and the recognition rate of normal green plum was 95.65%. The results were compared with the source VGG network, resnet18 network, and green lemon network. The results show that for the classification of green plum defects, the recognition accuracy of the green plum defect detection network increased by 9.8% and 16.6%, and the test speed is increased by 1.87 and 6.21 ms, respectively, which has certain advantages. [ABSTRACT FROM AUTHOR]

New ongoing rural construction has resulted in an extensive mixture of new settlements with old ones in the rural areas of China. Understanding the spatial characteristic of these rural settlements is of crucial importance as it provides essential information for land management and decision-making. Despite a great advance in High Spatial Resolution (HSR) satellite images and deep learning techniques, it remains a challenging task for mapping rural settlements accurately because of their irregular morphology and distribution pattern. In this study, we proposed a novel framework to map rural settlements by leveraging the merits of Gaofen-2 HSR images and representation learning of deep learning. We combined a dilated residual convolutional network (Dilated-ResNet) and a multi-scale context subnetwork into an end-to-end architecture in order to learn high resolution feature representations from HSR images and to aggregate and refine the multi-scale features extracted by the aforementioned network. Our experiment in Tongxiang city showed that the proposed framework effectively mapped and discriminated rural settlements with an overall accuracy of 98% and Kappa coefficient of 85%, achieving comparable and improved performance compared to other existing methods. Our results bring tangible benefits to support other convolutional neural network (CNN)-based methods in accurate and timely rural settlement mapping, particularly when up-to-date ground truth is absent. The proposed method does not only offer an effective way to extract rural settlement from HSR images but open a new opportunity to obtain spatial-explicit understanding of rural settlements. [ABSTRACT FROM AUTHOR]