Search

In this paper, an inhomogeneous human body model was presented to investigate the propagation characteristics when the human body was used as an antenna to achieve signal transmission. Specifically, the channel gain of four scenarios, namely, (1) both TX electrode and RX electrode were placed in the air, (2) TX electrode was attached on the human body, and RX electrode was placed in the air, (3) TX electrode was placed in the air, and RX electrode was attached on the human body, (4) both the TX electrode and RX electrode were attached on the human body, were studied through numerical simulation in the frequency range 1 MHz to 90 MHz. Furthermore, the comparisons of input efficiency, accepted efficiency, total efficiency, absorption power of human body, and electric field distribution of different distances of four aforementioned scenarios were explored when the frequency was at 44 MHz. In addition, the influences of different human tissues, electrode position, and the distance between electrode and human body on the propagation characteristics were investigated respectively at 44 MHz. The results showed that the channel gain of Scenario 4 was the maximum when the frequency was from 1 MHz to 90 MHz. The propagation characteristics were almost independent of electrode position when the human body was using as an antenna. However, as the distance between TX electrode and human body increased, the channel gain decreased rapidly. The simulations were verified by experimental measurements. The results showed that the simulations were in agreement with the measurements. [ABSTRACT FROM AUTHOR]

This paper focuses on the problem of estimating and tracking time-varying direction-of-arrivals (DoAs) with an antenna array. A sequential DoA estimation method is proposed by extending the capon and sparse iterative covariance-based estimation (C-SPICE) method, which is an iterative off-grid method for estimating constant DoAs. Then, a moving average initialization technique is introduced such that the spatial spectrum information estimated in this snapshot can be utilized in the next one. In uniform linear arrays (ULAs), we replace the uniform grid in direction domain with that in a "frequency" domain, to improve estimation accuracy without additional complexity in practical applications. The validity and efficiency of the proposed methods are demonstrated through numerical experiments. [ABSTRACT FROM AUTHOR]

This paper proposes a portable hand haptic system using Leap Motion as a haptic interface that can be used in various virtual reality (VR) applications. The proposed hand haptic system was designed as an Arduino-based sensor architecture to enable a variety of tactile senses at low cost, and is also equipped with a portable wristband. As a haptic system designed for tactile feedback, the proposed system first identifies the left and right hands and then sends tactile senses (vibration and heat) to each fingertip (thumb and index finger). It is incorporated into a wearable band-type system, making its use easy and convenient. Next, hand motion is accurately captured using the sensor of the hand tracking system and is used for virtual object control, thus achieving interaction that enhances immersion. A VR application was designed with the purpose of testing the immersion and presence aspects of the proposed system. Lastly, technical and statistical tests were carried out to assess whether the proposed haptic system can provide a new immersive presence to users. According to the results of the presence questionnaire and the simulator sickness questionnaire, we confirmed that the proposed hand haptic system, in comparison to the existing interaction that uses only the hand tracking system, provided greater presence and a more immersive environment in the virtual reality. [ABSTRACT FROM AUTHOR]

Recently, ocean exploration has increased considerably through the use of autonomous underwater vehicles (AUV). A key enabling technology is the precision of the AUV navigation capability. In this paper, we focus on understanding the limitation of the AUV navigation system. That is, what are the observable error-states for different maneuvering types of the AUV? Since analyzing the performance of an underwater navigation system is highly complex, to answer the above question, current approaches use simulations. This, of course, limits the conclusions to the emulated type of vehicle used and to the simulation setup. For this reason, we take a different approach and analyze the system observability for different types of vehicle dynamics by finding the set of observable and unobservable states. To that end, we apply the observability Gramian approach, previously used only for terrestrial applications. We demonstrate our analysis for an underwater inertial navigation system aided by a Doppler velocity logger or by a pressure sensor. The result is a first prediction of the performance of an AUV standing, rotating at a position and turning at a constant speed. Our conclusions of the observable and unobservable navigation error states for different dynamics are supported by extensive numerical simulation. [ABSTRACT FROM AUTHOR]

This paper presents a framework of incremental 3D cuboid modeling by using the mapping results of an RGB-D camera based simultaneous localization and mapping (SLAM) system. This framework is useful in accurately creating cuboid CAD models from a point cloud in an online manner. While performing the RGB-D SLAM, planes are incrementally reconstructed from a point cloud in each frame to create a plane map. Then, cuboids are detected in the plane map by analyzing the positional relationships between the planes, such as orthogonality, convexity, and proximity. Finally, the position, pose, and size of a cuboid are determined by computing the intersection of three perpendicular planes. To suppress the false detection of the cuboids, the cuboid shapes are incrementally updated with sequential measurements to check the uncertainty of the cuboids. In addition, the drift error of the SLAM is compensated by the registration of the cuboids. As an application of our framework, an augmented reality-based interactive cuboid modeling system was developed. In the evaluation at cluttered environments, the precision and recall of the cuboid detection were investigated, compared with a batch-based cuboid detection method, so that the advantages of our proposed method were clarified. [ABSTRACT FROM AUTHOR]