Search

This document is a summary of a special issue of the journal Sensors, titled "Emerging AI+X-Based Sensor and Networking Technologies including Selected Papers from ICGHIT 2022–2023." The special issue features selected papers from the 10th and 11th International Conferences on Green and Human Information Technology (ICGHITs), which were held in Korea and Thailand. The conferences focused on the theme of "Emerging Artificial Intelligent (AI)+X technology" and "Hyper Automation + Human AI" respectively. The selected papers cover various topics such as network security, routing protocols, signal detection, and clustering mechanisms, all incorporating AI-based methods. The issue also includes papers on topics like secure authentication, distance estimation in RFID systems, energy optimization in smart homes, blockchain technology, and radar signal detection. The authors emphasize the importance of both technology and humanity in advancing green and information technologies. [Extracted from the article]

In recent years, the wide application of deep neural network models has brought serious risks of intellectual property rights infringement. Embedding a watermark in a network model is an effective solution to protect intellectual property rights. Although researchers have proposed schemes to add watermarks to models, they cannot prevent attackers from adding and overwriting original information, and embedding rates cannot be quantified. Therefore, aiming at these problems, this paper designs a high embedding rate and tamper-proof watermarking scheme. We employ wet paper coding (WPC), in which important parameters are regarded as wet blocks and the remaining unimportant parameters are regarded as dry blocks in the model. To obtain the important parameters more easily, we propose an optimized probabilistic selection strategy (OPSS). OPSS defines the unimportant-level function and sets the importance threshold to select the important parameter positions and to ensure that the original function is not affected after the model parameters are changed. We regard important parameters as an unmodifiable part, and only modify the part that includes the unimportant parameters. We selected the MNIST, CIFAR-10, and ImageNet datasets to test the performance of the model after adding a watermark and to analyze the fidelity, robustness, embedding rate, and comparison schemes of the model. Our experiment shows that the proposed scheme has high fidelity and strong robustness along with a high embedding rate and the ability to prevent malicious tampering. [ABSTRACT FROM AUTHOR]

Establishing an accurate and robust feature fusion mechanism is key to enhancing the tracking performance of single-object trackers based on a Siamese network. However, the output features of the depth-wise cross-correlation feature fusion module in fully convolutional trackers based on Siamese networks cannot establish global dependencies on the feature maps of a search area. This paper proposes a dynamic cascade feature fusion (DCFF) module by introducing a local feature guidance (LFG) module and dynamic attention modules (DAMs) after the depth-wise cross-correlation module to enhance the global dependency modeling capability during the feature fusion process. In this paper, a set of verification experiments is designed to investigate whether establishing global dependencies for the features output by the depth-wise cross-correlation operation can significantly improve the performance of fully convolutional trackers based on a Siamese network, providing experimental support for rational design of the structure of a dynamic cascade feature fusion module. Secondly, we integrate the dynamic cascade feature fusion module into the tracking framework based on a Siamese network, propose SiamDCFF, and evaluate it using public datasets. Compared with the baseline model, SiamDCFF demonstrated significant improvements. [ABSTRACT FROM AUTHOR]

Contributions in the Field of Image Techniques Five papers in this Special Issue deal with image processing, including face images, microscopic images, and infrared images. Nowadays, with numerous sensors placed everywhere around us, we can obtain signals collected from a variety of environment-based sensors, including the ones placed on the ground, cased in the air or water, etc. M. Geremek and K. Szklanny in [[9]] investigated deep learning based detection of genetic diseases from face images, for 15 genetic disorders associated with facial dysmorphism. Image and video data analyzed in the presented papers include microscope images and infrared images, as well as face images. [Extracted from the article]

This paper proposes a scheme for predicting ground reaction force (GRF) and center of pressure (CoP) using low-cost FSR sensors. GRF and CoP data are commonly collected from smart insoles to analyze the wearer's gait and diagnose balance issues. This approach can be utilized to improve a user's rehabilitation process and enable customized treatment plans for patients with specific diseases, making it a useful technology in many fields. However, the conventional measuring equipment for directly monitoring GRF and CoP values, such as F-Scan, is expensive, posing a challenge to commercialization in the industry. To solve this problem, this paper proposes a technology to predict relevant indicators using only low-cost Force Sensing Resistor (FSR) sensors instead of expensive equipment. In this study, data were collected from subjects simultaneously wearing a low-cost FSR Sensor and an F-Scan device, and the relationship between the collected data sets was analyzed using supervised learning techniques. Using the proposed technique, an artificial neural network was constructed that can derive a predicted value close to the actual F-Scan values using only the data from the FSR Sensor. In this process, GRF and CoP were calculated using six virtual forces instead of the pressure value of the entire sole. It was verified through various simulations that it is possible to achieve an improved prediction accuracy of more than 30% when using the proposed technique compared to conventional prediction techniques. [ABSTRACT FROM AUTHOR]

Aiming at the shortcomings of single-sensor sensing information characterization ability, which is easily interfered with by external environmental factors, a method of intelligent perception is proposed in this paper. This method integrates multi-source and multi-level information, including spindle temperature field, spindle thermal deformation, operating parameters, and motor current. Firstly, the internal and external thermal-error-related signals of the spindle system are collected by sensors, and the feature parameters are extracted; then, the radial basis function (RBF) neural network is utilized to realize the preliminary integration of the feature parameters because of the advantages of the RBF neural network, which offers strong multi-dimensional solid nonlinear mapping ability and generalization ability. Thermal-error decision values are then generated by a weighted fusion of different pieces of evidence by considering uncertain information from multiple sources. The spindle thermal-error sensing experiment was based on the spindle system of the VMC850 (Yunnan Machine Tool Group Co., LTD, Yunnan, China) vertical machining center of the Yunnan Machine Tool Factory. Experiments were designed for thermal-error sensing of the spindle under constant speed (2000 r/min and 4000 r/min), standard variable speed, and stepped variable speed conditions. The experiment's results show that the prediction accuracy of the intelligent-sensing model with multi-source information fusion can reach 98.1%, 99.3%, 98.6%, and 98.8% under the above working conditions, respectively. The intelligent-perception model proposed in this paper has higher accuracy and lower residual error than the traditional BP neural network perception and wavelet neural network models. The research in this paper provides a theoretical basis for the operation, maintenance management, and performance optimization of machine tool spindle systems. [ABSTRACT FROM AUTHOR]

This paper addresses issues concerning biometric authentication based on handwritten signatures. Our research aimed to check whether a handwritten signature acquired with a mobile device can effectively verify a user's identity. We present a novel online signature verification method using coordinates of points and pressure values at each point collected with a mobile device. Convolutional neural networks are used for signature verification. In this paper, three neural network models are investigated, i.e., two self-made light SigNet and SigNetExt models and the VGG-16 model commonly used in image processing. The convolutional neural networks aim to determine whether the acquired signature sample matches the class declared by the signer. Thus, the scenario of closed set verification is performed. The effectiveness of our method was tested on signatures acquired with mobile phones. We used the subset of the multimodal database, MobiBits, that was captured using a custom-made application and consists of samples acquired from 53 people of diverse ages. The experimental results on accurate data demonstrate that developed architectures of deep neural networks can be successfully used for online handwritten signature verification. We achieved an equal error rate (EER) of 0.63% for random forgeries and 6.66% for skilled forgeries. [ABSTRACT FROM AUTHOR]

This document is an editorial for a special issue titled "Machine Learning in Computer Vision and Image Sensing: Theory and Applications." The editorial highlights the diverse applications of machine learning (ML) models in various domains such as medical imaging, signal processing, remote sensing, and human activity detection. The special issue includes 11 papers that cover topics such as image segmentation, fluvial navigation, Alzheimer's disease classification, pneumothorax detection, lung cancer malignancy prediction, amniotic fluid volume detection, COVID-19 detection, and Parkinson's disease detection. The papers showcase the progress and potential of ML models in computer vision applications and provide valuable insights for future research. [Extracted from the article]

This study investigates the characteristics of a novel origami-based, elastomeric actuator and a soft gripper, which are controlled by hand gestures that are recognized through machine learning algorithms. The lightweight paper–elastomer structure employed in this research exhibits distinct actuation features in four key areas: (1) It requires approximately 20% less pressure for the same bending amplitude compared to pneumatic network actuators (Pneu-Net) of equivalent weight, and even less pressure compared to other actuators with non-linear bending behavior; (2) The control of the device is examined by validating the relationship between pressure and the bending angle, as well as the interaction force and pressure at a fixed bending angle; (3) A soft robotic gripper comprising three actuators is designed. Enveloping and pinch grasping experiments are conducted on various shapes, which demonstrate the gripper's potential in handling a wide range of objects for numerous applications; and (4) A gesture recognition algorithm is developed to control the gripper using electromyogram (EMG) signals from the user's muscles. [ABSTRACT FROM AUTHOR]

Sugarcane is an important raw material for sugar and chemical production. However, in recent years, various sugarcane diseases have emerged, severely impacting the national economy. To address the issue of identifying diseases in sugarcane leaf sections, this paper proposes the SE-VIT hybrid network. Unlike traditional methods that directly use models for classification, this paper compares threshold, K-means, and support vector machine (SVM) algorithms for extracting leaf lesions from images. Due to SVM's ability to accurately segment these lesions, it is ultimately selected for the task. The paper introduces the SE attention module into ResNet-18 (CNN), enhancing the learning of inter-channel weights. After the pooling layer, multi-head self-attention (MHSA) is incorporated. Finally, with the inclusion of 2D relative positional encoding, the accuracy is improved by 5.1%, precision by 3.23%, and recall by 5.17%. The SE-VIT hybrid network model achieves an accuracy of 97.26% on the PlantVillage dataset. Additionally, when compared to four existing classical neural network models, SE-VIT demonstrates significantly higher accuracy and precision, reaching 89.57% accuracy. Therefore, the method proposed in this paper can provide technical support for intelligent management of sugarcane plantations and offer insights for addressing plant diseases with limited datasets. [ABSTRACT FROM AUTHOR]

This research paper explores the realm of fault detection in distributed motors through the vision of the Internet of electrical drives. This paper aims at employing artificial neural networks supported by the data collected by the Internet of distributed devices. Cross-verification of results offers reliable diagnosis of industrial motor faults. The proposed methodology involves the development of a cyber–physical system architecture and mathematical modeling framework for efficient fault detection. The mathematical model is designed to capture the intricate relationships within the cyber–physical system, incorporating the dynamic interactions between distributed motors and their edge controllers. Fast Fourier transform is employed for signal processing, enabling the extraction of meaningful frequency features that serve as indicators of potential faults. The artificial neural network based fault detection system is integrated with the solution, utilizing its ability to learn complex patterns and adapt to varying motor conditions. The effectiveness of the proposed framework and model is demonstrated through experimental results. The experimental setup involves diverse fault scenarios, and the system's performance is evaluated in terms of accuracy, sensitivity, and false positive rates. [ABSTRACT FROM AUTHOR]

Understanding road conditions is essential for implementing effective road safety measures and driving solutions. Road situations encompass the day-to-day conditions of roads, including the presence of vehicles and pedestrians. Surveillance cameras strategically placed along streets have been instrumental in monitoring road situations and providing valuable information on pedestrians, moving vehicles, and objects within road environments. However, these video data and information are stored in large volumes, making analysis tedious and time-consuming. Deep learning models are increasingly utilized to monitor vehicles and identify and evaluate road and driving comfort situations. However, the current neural network model requires the recognition of situations using time-series video data. In this paper, we introduced a multi-directional detection model for road situations to uphold high accuracy. Deep learning methods often integrate long short-term memory (LSTM) into long-term recurrent network architectures. This approach effectively combines recurrent neural networks to capture temporal dependencies and convolutional neural networks (CNNs) to extract features from extensive video data. In our proposed method, we form a multi-directional long-term recurrent convolutional network approach with two groups equipped with CNN and two layers of LSTM. Additionally, we compare road situation recognition using convolutional neural networks, long short-term networks, and long-term recurrent convolutional networks. The paper presents a method for detecting and recognizing multi-directional road contexts using a modified LRCN. After balancing the dataset through data augmentation, the number of video files increased, resulting in our model achieving 91% accuracy, a significant improvement from the original dataset. [ABSTRACT FROM AUTHOR]

Human Activity Recognition (HAR) plays an important role in the automation of various tasks related to activity tracking in such areas as healthcare and eldercare (telerehabilitation, telemonitoring), security, ergonomics, entertainment (fitness, sports promotion, human–computer interaction, video games), and intelligent environments. This paper tackles the problem of real-time recognition and repetition counting of 12 types of exercises performed during athletic workouts. Our approach is based on the deep neural network model fed by the signal from a 9-axis motion sensor (IMU) placed on the chest. The model can be run on mobile platforms (iOS, Android). We discuss design requirements for the system and their impact on data collection protocols. We present architecture based on an encoder pretrained with contrastive learning. Compared to end-to-end training, the presented approach significantly improves the developed model's quality in terms of accuracy (F1 score, MAPE) and robustness (false-positive rate) during background activity. We make the AIDLAB-HAR dataset publicly available to encourage further research. [ABSTRACT FROM AUTHOR]

Monitoring heart conditions through electrocardiography (ECG) has been the cornerstone of identifying cardiac irregularities. Cardiologists often rely on a detailed analysis of ECG recordings to pinpoint deviations that are indicative of heart anomalies. This traditional method, while effective, demands significant expertise and is susceptible to inaccuracies due to its manual nature. In the realm of computational analysis, Artificial Neural Networks (ANNs) have gained prominence across various domains, which can be attributed to their superior analytical capabilities. Conversely, Spiking Neural Networks (SNNs), which mimic the neural activity of the brain more closely through impulse-based processing, have not seen widespread adoption. The challenge lies primarily in the complexity of their training methodologies. Despite this, SNNs offer a promising avenue for energy-efficient computational models capable of displaying a high-level performance. This paper introduces an innovative approach employing SNNs augmented with an attention mechanism to enhance feature recognition in ECG signals. By leveraging the inherent efficiency of SNNs, coupled with the precision of attention modules, this model aims to refine the analysis of cardiac signals. The novel aspect of our methodology involves adapting the learned parameters from ANNs to SNNs using leaky integrate-and-fire (LIF) neurons. This transfer learning strategy not only capitalizes on the strengths of both neural network models but also addresses the training challenges associated with SNNs. The proposed method is evaluated through extensive experiments on two publicly available benchmark ECG datasets. The results show that our model achieves an overall accuracy of 93.8% on the MIT-BIH Arrhythmia dataset and 85.8% on the 2017 PhysioNet Challenge dataset. This advancement underscores the potential of SNNs in the field of medical diagnostics, offering a path towards more accurate, efficient, and less resource-intensive analyses of heart diseases. [ABSTRACT FROM AUTHOR]

Radio frequency interference (RFI) significantly hampers the target detection performance of frequency-modulated continuous-wave radar. To address the problem and maintain the target echo signal, this paper proposes a priori assumption on the interference component nature in the radar received signal, as well as a method for interference estimation and mitigation via time–frequency analysis. The solution employs Fourier synchrosqueezed transform to implement the radar's beat signal transformation from time domain to time–frequency domain, thus converting the interference mitigation to the task of time–frequency distribution image restoration. The solution proposes the use of image processing based on the dual-tree complex wavelet transform and combines it with the spatial domain-based approach, thereby establishing a dual-domain fusion interference filter for time–frequency distribution images. This paper also presents a convolutional neural network model of structurally improved UNet++, which serves as the interference estimator. The proposed solution demonstrated its capability against various forms of RFI through the simulation experiment and showed a superior interference mitigation performance over other CNN model-based approaches. [ABSTRACT FROM AUTHOR]

This paper discusses the problem of recognizing defective epoxy drop images for the purpose of performing vision-based die attachment inspection in integrated circuit (IC) manufacturing based on deep neural networks. Two supervised and two unsupervised recognition models are considered. The supervised models examined are an autoencoder (AE) network together with a multi-layer perceptron network (MLP) and a VGG16 network, while the unsupervised models examined are an autoencoder (AE) network together with k-means clustering and a VGG16 network together with k-means clustering. Since in practice very few defective epoxy drop images are available on an actual IC production line, the emphasis in this paper is placed on the impact of data augmentation on the recognition outcome. The data augmentation is achieved by generating synthesized defective epoxy drop images via our previously developed enhanced loss function CycleGAN generative network. The experimental results indicate that when using data augmentation, the supervised and unsupervised models of VGG16 generate perfect or near perfect accuracies for recognition of defective epoxy drop images for the dataset examined. More specifically, for the supervised models of AE+MLP and VGG16, the recognition accuracy is improved by 47% and 1%, respectively, and for the unsupervised models of AE+Kmeans and VGG+Kmeans, the recognition accuracy is improved by 37% and 15%, respectively, due to the data augmentation. [ABSTRACT FROM AUTHOR]

Fishing nets are dangerous obstacles for an underwater robot whose aim is to reach a goal in unknown underwater environments. This paper proposes how to make the robot reach its goal, while avoiding fishing nets that are detected using the robot's camera sensors. For the detection of underwater nets based on camera measurements of the robot, we can use deep neural networks. Passive camera sensors do not provide the distance information between the robot and a net. Camera sensors only provide the bearing angle of a net, with respect to the robot's camera pose. There may be trailing wires that extend from a net, and the wires can entangle the robot before the robot detects the net. Moreover, light, viewpoint, and sea floor condition can decrease the net detection probability in practice. Therefore, whenever a net is detected by the robot's camera, we make the robot avoid the detected net by moving away from the net abruptly. For moving away from the net, the robot uses the bounding box for the detected net in the camera image. After the robot moves backward for a certain distance, the robot makes a large circular turn to approach the goal, while avoiding the net. A large circular turn is used, since moving close to a net is too dangerous for the robot. As far as we know, our paper is unique in addressing reactive control laws for approaching the goal, while avoiding fishing nets detected using camera sensors. The effectiveness of the proposed net avoidance controls is verified using simulations. [ABSTRACT FROM AUTHOR]

Shadow removal for document images is an essential task for digitized document applications. Recent shadow removal models have been trained on pairs of shadow images and shadow-free images. However, obtaining a large, diverse dataset for document shadow removal takes time and effort. Thus, only small real datasets are available. Graphic renderers have been used to synthesize shadows to create relatively large datasets. However, the limited number of unique documents and the limited lighting environments adversely affect the network performance. This paper presents a large-scale, diverse dataset called the Synthetic Document with Diverse Shadows (SynDocDS) dataset. The SynDocDS comprises rendered images with diverse shadows augmented by a physics-based illumination model, which can be utilized to obtain a more robust and high-performance deep shadow removal network. In this paper, we further propose a Dual Shadow Fusion Network (DSFN). Unlike natural images, document images often have constant background colors requiring a high understanding of global color features for training a deep shadow removal network. The DSFN has a high global color comprehension and understanding of shadow regions and merges shadow attentions and features efficiently. We conduct experiments on three publicly available datasets, the OSR, Kligler's, and Jung's datasets, to validate our proposed method's effectiveness. In comparison to training on existing synthetic datasets, our model training on the SynDocDS dataset achieves an enhancement in the PSNR and SSIM, increasing them from 23.00 dB to 25.70 dB and 0.959 to 0.971 on average. In addition, the experiments demonstrated that our DSFN clearly outperformed other networks across multiple metrics, including the PSNR, the SSIM, and its impact on OCR performance. [ABSTRACT FROM AUTHOR]

Deep neural networks (DNNs) are increasingly important in the medical diagnosis of electrocardiogram (ECG) signals. However, research has shown that DNNs are highly vulnerable to adversarial examples, which can be created by carefully crafted perturbations. This vulnerability can lead to potential medical accidents. This poses new challenges for the application of DNNs in the medical diagnosis of ECG signals. This paper proposes a novel network Channel Activation Suppression with Lipschitz Constraints Net (CASLCNet), which employs the Channel-wise Activation Suppressing (CAS) strategy to dynamically adjust the contribution of different channels to the class prediction and uses the 1-Lipschitz's ℓ∞ distance network as a robust classifier to reduce the impact of adversarial perturbations on the model itself in order to increase the adversarial robustness of the model. The experimental results demonstrate that CASLCNet achieves A C C r o b u s t scores of 91.03% and 83.01% when subjected to PGD attacks on the MIT-BIH and CPSC2018 datasets, respectively, which proves that the proposed method in this paper enhances the model's adversarial robustness while maintaining a high accuracy rate. [ABSTRACT FROM AUTHOR]

This paper investigates a method for precise mapping of human arm movements using sEMG signals. A multi-channel approach captures the sEMG signals, which, combined with the accurately calculated joint angles from an Inertial Measurement Unit, allows for action recognition and mapping through deep learning algorithms. Firstly, signal acquisition and processing were carried out, which involved acquiring data from various movements (hand gestures, single-degree-of-freedom joint movements, and continuous joint actions) and sensor placement. Then, interference signals were filtered out through filters, and the signals were preprocessed using normalization and moving averages to obtain sEMG signals with obvious features. Additionally, this paper constructs a hybrid network model, combining Convolutional Neural Networks and Artificial Neural Networks, and employs a multi-feature fusion algorithm to enhance the accuracy of gesture recognition. Furthermore, a nonlinear fitting between sEMG signals and joint angles was established based on a backpropagation neural network, incorporating momentum term and adaptive learning rate adjustments. Finally, based on the gesture recognition and joint angle prediction model, prosthetic arm control experiments were conducted, achieving highly accurate arm movement prediction and execution. This paper not only validates the potential application of sEMG signals in the precise control of robotic arms but also lays a solid foundation for the development of more intuitive and responsive prostheses and assistive devices. [ABSTRACT FROM AUTHOR]

Due to the complexity of real optical flow capture, the existing research still has not performed real optical flow capture of infrared (IR) images with the production of an optical flow based on IR images, which makes the research and application of deep learning-based optical flow computation limited to the field of RGB images only. Therefore, in this paper, we propose a method to produce an optical flow dataset of IR images. We utilize the RGB-IR cross-modal image transformation network to rationally transform existing RGB image optical flow datasets. The RGB-IR cross-modal image transformation is based on the improved Pix2Pix implementation, and in the experiments, the network is validated and evaluated using the RGB-IR aligned bimodal dataset M3FD. Then, RGB-IR cross-modal transformation is performed on the existing RGB optical flow dataset KITTI, and the optical flow computation network is trained using the IR images generated by the transformation. Finally, the computational results of the optical flow computation network before and after training are analyzed based on the RGB-IR aligned bimodal data. [ABSTRACT FROM AUTHOR]

Among the numerous gaze-estimation methods currently available, appearance-based methods predominantly use RGB images as input and employ convolutional neural networks (CNNs) to detect facial images to regressively obtain gaze angles or gaze points. Model-based methods require high-resolution images to obtain a clear eyeball geometric model. These methods face significant challenges in outdoor environments and practical application scenarios. This paper proposes a model-based gaze-estimation algorithm using a low-resolution 3D TOF camera. This study uses infrared images instead of RGB images as input to overcome the impact of varying illumination intensity in the environment on gaze estimation. We utilized a trained YOLOv8 neural network model to detect eye landmarks in captured facial images. Combined with the depth map from a time-of-flight (TOF) camera, we calculated the 3D coordinates of the canthus points of a single eye of the subject. Based on this, we fitted a 3D geometric model of the eyeball to determine the subject's gaze angle. Experimental validation showed that our method achieved a root mean square error of 6.03° and 4.83° in the horizontal and vertical directions, respectively, for the detection of the subject's gaze angle. We also tested the proposed method in a real car driving environment, achieving stable driver gaze detection at various locations inside the car, such as the dashboard, driver mirror, and the in-vehicle screen. [ABSTRACT FROM AUTHOR]

This paper presents a computer vision-based approach to chronic subdural hematoma segmentation that can be performed by one click. Chronic subdural hematoma is estimated to occur in 0.002–0.02% of the general population each year and the risk increases with age, with a high frequency of about 0.05–0.06% in people aged 70 years and above. In our research, we developed our own dataset, which includes 53 series of CT scans collected from 21 patients with one or two hematomas. Based on the dataset, we trained two neural network models based on U-Net architecture to automate the manual segmentation process. One of the models performed segmentation based only on the current frame, while the other additionally processed multiple adjacent images to provide context, a technique that is more similar to the behavior of a doctor. We used a 10-fold cross-validation technique to better estimate the developed models' efficiency. We used the Dice metric for segmentation accuracy estimation, which was 0.77. Also, for testing our approach, we used scans from five additional patients who did not form part of the dataset, and created a scenario in which three medical experts carried out a hematoma segmentation before we carried out segmentation using our best model. We developed the OsiriX DICOM Viewer plugin to implement our solution into the segmentation process. We compared the segmentation time, which was more than seven times faster using the one-click approach, and the experts agreed that the segmentation quality was acceptable for clinical usage. [ABSTRACT FROM AUTHOR]

With the development of industrial manufacturing intelligence, the role of rotating machinery in industrial production and life is more and more important. Aiming at the problems of the complex and changeable working environment of rolling bearings and limited computing ability, fault feature information cannot be effectively extracted, and the current deep learning model is difficult to be compatible with lightweight and high efficiency. Therefore, this paper proposes a fault detection method for power equipment based on an energy spectrum diagram and deep learning. Firstly, a novel two-dimensional time-frequency feature representation method and energy spectrum feature map based on wavelet packet transform is proposed, and an energy spectrum feature map dataset is made for subsequent diagnosis. This method can realize multi-resolution analysis, fully extract the feature information contained in the fault signal, and accelerate the convergence of the subsequent diagnosis model. Secondly, a lightweight residual dense convolutional neural network model (LR-DenseNet) is proposed. This model combines the advantages of residual learning and a dense connection, and can not only extract deep features more easily, but can also effectively use shallow features. Then, based on the lightweight residual dense convolutional neural network model, an LR-DenseSENet model is proposed. By introducing the transfer learning strategy and adding the channel domain, an attention mechanism is added to the channel feature fusion layer, with the accuracy of detection up to 99.4%, and the amount of parameter calculation greatly reduced to one-fifth of that of VGG. Finally, through an experimental analysis, it is verified that the fault detection model designed in this paper based on the combination of an energy spectrum feature map and LR-DenseSENet achieves a satisfactory detection effect. [ABSTRACT FROM AUTHOR]

Froth flotation is a widespread and important method for mineral separation, significantly influencing the purity and quality of extracted minerals. Traditionally, workers need to control chemical dosages by observing the visual characteristics of flotation froth, but this requires considerable experience and operational skills. This paper designs a deep ensemble learning-based sensor for flotation froth image recognition to monitor actual flotation froth working conditions, so as to assist operators in facilitating chemical dosage adjustments and achieve the industrial goals of promoting concentrate grade and mineral recovery. In our approach, training and validation data on flotation froth images are partitioned in K-fold cross validation, and deep neural network (DNN) based learners are generated through pre-trained DNN models in image-enhanced training data, in order to improve their generalization and robustness. Then, a membership function utilizing the performance information of the DNN-based learners during the validation is proposed to improve the recognition accuracy of the DNN-based learners. Subsequently, a technique for order preference by similarity to an ideal solution (TOPSIS) based on the F1 score is proposed to select the most probable working condition of flotation froth images through a decision matrix composed of the DNN-based learners' predictions via a membership function, which is adopted to optimize the combination process of deep ensemble learning. The effectiveness and superiority of the designed sensor are verified in a real industrial gold–antimony froth flotation application. [ABSTRACT FROM AUTHOR]

Biomimetic neuromorphic sensing systems, inspired by the structure and function of biological neural networks, represent a major advancement in the field of sensing technology and artificial intelligence. This review paper focuses on the development and application of electrolyte gated transistors (EGTs) as the core components (synapses and neuros) of these neuromorphic systems. EGTs offer unique advantages, including low operating voltage, high transconductance, and biocompatibility, making them ideal for integrating with sensors, interfacing with biological tissues, and mimicking neural processes. Major advances in the use of EGTs for neuromorphic sensory applications such as tactile sensors, visual neuromorphic systems, chemical neuromorphic systems, and multimode neuromorphic systems are carefully discussed. Furthermore, the challenges and future directions of the field are explored, highlighting the potential of EGT-based biomimetic systems to revolutionize neuromorphic prosthetics, robotics, and human–machine interfaces. Through a comprehensive analysis of the latest research, this review is intended to provide a detailed understanding of the current status and future prospects of biomimetic neuromorphic sensory systems via EGT sensing and integrated technologies. [ABSTRACT FROM AUTHOR]

This paper proposes a novel approach to enhance the multichannel fiber optic sensing systems by integrating an Inverse Fast Fourier Transform-based Deep Neural Network (IFFT-DNN) to accurately predict sensor responses despite signals overlapping and crosstalk between sensors. The IFFT-DNN leverages both frequency and time domain information, enabling a comprehensive feature extraction which enhances the prediction accuracy and reliability performance. To investigate the IFFT-DNN's performance, we propose a multichannel water level sensing system based on Free Space Optics (FSO) to measure the water level at multiple points in remote areas. The experimental results demonstrate the system's high precision, with a Mean Absolute Error (MAE) of 0.07 cm, even in complex conditions. Hence, this system provides a cost-effective and reliable remote water level sensing solution, highlighting its practical applicability in various industrial settings. [ABSTRACT FROM AUTHOR]

Ensuring a safe nighttime environmental perception system relies on the early detection of vulnerable road users with minimal delay and high precision. This paper presents a sensor-fused nighttime environmental perception system by integrating data from thermal and RGB cameras. A new alignment algorithm is proposed to fuse the data from the two camera sensors. The proposed alignment procedure is crucial for effective sensor fusion. To develop a robust Deep Neural Network (DNN) system, nighttime thermal and RGB images were collected under various scenarios, creating a labeled dataset of 32,000 image pairs. Three fusion techniques were explored using transfer learning, alongside two single-sensor models using only RGB or thermal data. Five DNN models were developed and evaluated, with experimental results showing superior performance of fused models over non-fusion counterparts. The late-fusion system was selected for its optimal balance of accuracy and response time. For real-time inferencing, the best model was further optimized, achieving 33 fps on the embedded edge computing device, an 83.33% improvement in inference speed over the system without optimization. These findings are valuable for advancing Advanced Driver Assistance Systems (ADASs) and autonomous vehicle technologies, enhancing pedestrian detection during nighttime to improve road safety and reduce accidents. [ABSTRACT FROM AUTHOR]

The automatic detection of smoke by analyzing the video stream acquired by traditional surveillance cameras is becoming a more and more interesting problem for the scientific community thanks to the necessity to prevent fires at the very early stages. The adoption of a smart visual sensor, namely a computer vision algorithm running in real time, allows one to overcome the limitations of standard physical sensors. Nevertheless, this is a very challenging problem, due to the strong similarity of the smoke with other environmental elements like clouds, fog and dust. In addition to this challenge, data available for training deep neural networks is limited and not fully representative of real environments. Within this context, in this paper we propose a new method for smoke detection based on the combination of motion and appearance analysis with a modern convolutional neural network (CNN). Moreover, we propose a new dataset, called the MIVIA Smoke Detection Dataset (MIVIA-SDD), publicly available for research purposes; it consists of 129 videos covering about 28 h of recordings. The proposed hybrid method, trained and evaluated on the proposed dataset, demonstrated to be very effective by achieving a 94% smoke recognition rate and, at the same time, a substantially lower false positive rate if compared with fully deep learning-based approaches (14% vs. 100%). Therefore, the proposed combination of motion and appearance analysis with deep learning CNNs can be further investigated to improve the precision of fire detection approaches. [ABSTRACT FROM AUTHOR]

In the process of metal wire and additive manufacturing, due to changes in temperature, humidity, current, voltage, and other parameters, as well as the failure of machinery and equipment, a failure may occur in the manufacturing process that seriously affects the current situation of production efficiency and product quality. Based on the demand for monitoring of the key impact parameters of additive manufacturing, this paper develops a parameter monitoring and prediction system for the additive manufacturing feeding process to provide a basis for future fault diagnosis. The fault diagnosis and prediction system for metal wire supply and additive manufacturing utilizes STM 32 as its core, enabling the capture and transmission of temperature, humidity, current, and voltage data. The upper computer system, designed on the LabVIEW 2019 virtual instrument platform, incorporates an LSTM neural network model and facilitates a connection between LabVIEW and MATLAB 2019 to achieve the prediction function. The monitoring and prediction system established in this study is intended to provide basic research assistance in the field of fault diagnosis. [ABSTRACT FROM AUTHOR]

With the increasing frequency and severity of disasters and accidents, there is a growing need for efficient emergency alert systems. The ultra-high definition (UHD) broadcasting service based on Advanced Television Systems Committee (ATSC) 3.0, a leading terrestrial digital broadcasting system, offers such capabilities, including a wake-up function for minimizing damage through early alerts. In case of a disaster situation, the emergency alert wake-up signal is transmitted, allowing UHD TVs to be activated, enabling individuals to receive emergency alerts and access emergency broadcasting content. However, conventional methods for detecting the bootstrap signal, essential for this function, typically require an ATSC 3.0 demodulator. In this paper, we propose a novel deep learning-based method capable of detecting an emergency wake-up signal without the need for an ATSC 3.0. The proposed method leverages deep learning techniques, specifically a deep neural network (DNN) structure for bootstrap detection and a convolutional neural network (CNN) structure for wake-up signal demodulation and to detect the bootstrap and 2 bit emergency alert wake-up signal. Specifically, our method eliminates the need for Fast Fourier Transform (FFT), frequency synchronization, and interleaving processes typically required by a demodulator. By applying a deep learning in the time domain, we simplify the detection process, allowing for the detection of an emergency alert signal without the full suite of demodulator components required for ATSC 3.0. Furthermore, we have verified the performance of the deep learning-based method using ATSC 3.0-based RF signals and a commercial Software-Defined Radio (SDR) platform in a real environment. [ABSTRACT FROM AUTHOR]

The latest survey results show an increase in accidents on the roads involving pedestrians and cyclists. The reasons for such situations are many, the fault actually lies on both sides. Equipping vehicles, especially autonomous vehicles, with frequency-modulated continuous-wave (FMCW) radar and dedicated algorithms for analyzing signals in the time–frequency domain as well as algorithms for recognizing objects in radar imaging through deep neural networks can positively affect safety. This paper presents a method for recognizing and distinguishing a group of objects based on radar signatures of objects and a special convolutional neural network structure. The proposed approach is based on a database of radar signatures generated on pedestrian, cyclist, and car models in a Matlab environment. The obtained results of simulations and positive tests provide a basis for the application of the system in many sectors and areas of the economy. Innovative aspects of the work include the method of discriminating between multiple objects on a single radar signature, the dedicated architecture of the convolutional neural network, and the use of a method of generating a custom input database. [ABSTRACT FROM AUTHOR]

In this paper, we propose a lightweight U-net architecture neural network model based on Dark Channel Prior (DCP) for efficient haze (fog) removal with a single input. The existing DCP requires high computational complexity in its operation. These computations are challenging to accelerate, and the problem is exacerbated when dealing with high-resolution images (videos), making it very difficult to apply to general-purpose applications. Our proposed model addresses this issue by employing a two-stage neural network structure, replacing the computationally complex operations of the conventional DCP with easily accelerated convolution operations to achieve high-quality fog removal. Furthermore, our proposed model is designed with an intuitive structure using a relatively small number of parameters (2M), utilizing resources efficiently. These features demonstrate the effectiveness and efficiency of the proposed model for fog removal. The experimental results show that the proposed neural network model achieves an average Peak Signal-to-Noise Ratio (PSNR) of 26.65 dB and a Structural Similarity Index Measure (SSIM) of 0.88, indicating an improvement in the average PSNR of 11.5 dB and in SSIM of 0.22 compared to the conventional DCP. This shows that the proposed neural network achieves comparable results to CNN-based neural networks that have achieved SOTA-class performance, despite its intuitive structure with a relatively small number of parameters. [ABSTRACT FROM AUTHOR]

Chemical warfare agents pose a serious threat due to their extreme toxicity, necessitating swift the identification of chemical gases and individual responses to the identified threats. Fourier transform infrared (FTIR) spectroscopy offers a method for remote material analysis, particularly in detecting colorless and odorless chemical agents. In this paper, we propose a deep neural network utilizing a semi-supervised autoencoder (SSAE) for the classification of chemical gases based on FTIR spectra. In contrast to traditional methods, the SSAE concurrently trains an autoencoder and a classifier attached to a latent vector of the autoencoder, enhancing feature extraction for classification. The SSAE was evaluated on laboratory-collected FTIR spectra, demonstrating a superior classification performance compared to existing methods. The efficacy of the SSAE lies in its ability to generate denser cluster distributions in latent vectors, thereby enhancing gas classification. This study established a consistent experimental environment for hyperparameter optimization, offering valuable insights into the influence of latent vectors on classification performance. [ABSTRACT FROM AUTHOR]

The paper introduces a computer vision methodology for detecting pitting corrosion in gas pipelines. To achieve this, a dataset comprising 576,000 images of pipelines with and without pitting corrosion was curated. A custom-designed and optimized convolutional neural network (CNN) was employed for binary classification, distinguishing between corroded and non-corroded images. This CNN architecture, despite having relatively few parameters compared to existing CNN classifiers, achieved a notably high classification accuracy of 98.44%. The proposed CNN outperformed many contemporary classifiers in its efficacy. By leveraging deep learning, this approach effectively eliminates the need for manual inspection of pipelines for pitting corrosion, thus streamlining what was previously a time-consuming and cost-ineffective process. [ABSTRACT FROM AUTHOR]

This paper presents the results of a study on data preprocessing and modeling for predicting corrosion in water pipelines of a steel industrial plant. The use case is a cooling circuit consisting of both direct and indirect cooling. In the direct cooling circuit, water comes into direct contact with the product, whereas in the indirect one, it does not. In this study, advanced machine learning techniques, such as extreme gradient boosting and deep neural networks, have been employed for two distinct applications. Firstly, a virtual sensor was created to estimate the corrosion rate based on influencing process variables, such as pH and temperature. Secondly, a predictive tool was designed to foresee the future evolution of the corrosion rate, considering past values of both influencing variables and the corrosion rate. The results show that the most suitable algorithm for the virtual sensor approach is the dense neural network, with MAPE values of (25 ± 4)% and (11 ± 4)% for the direct and indirect circuits, respectively. In contrast, different results are obtained for the two circuits when following the predictive tool approach. For the primary circuit, the convolutional neural network yields the best results, with MAPE = 4% on the testing set, whereas for the secondary circuit, the LSTM recurrent network shows the highest prediction accuracy, with MAPE = 9%. In general, models employing temporal windows have emerged as more suitable for corrosion prediction, with model performance significantly improving with a larger dataset. [ABSTRACT FROM AUTHOR]

The degradation of the cutting tool and its optimal replacement is a major problem in machining given the variability in this degradation even under constant cutting conditions. Therefore, monitoring the degradation of cutting tools is an important part of the process in order to replace the tool at the optimal time and thus reduce operating costs. In this paper, a cutting tool degradation monitoring technique is proposed using bootstrap-based artificial neural networks. Different indicators from the turning operation are used as input to the approach: the RMS value of the cutting force and torque, the machining duration, and the total machined length. They are used by the approach to estimate the size of the flank wear (VB). Different neural networks are tested but the best results are achieved with an architecture containing two hidden layers: the first one containing six neurons with a Tanh activation function and the second one containing six neurons with an ReLu activation function. The novelty of the approach makes it possible, by using the bootstrap approach, to determine a confidence interval around the prediction. The results show that the networks are able to accurately track the degradation and detect the end of life of the cutting tools in a timely manner, but also that the confidence interval allows an estimate of the possible variation of the prediction to be made, thus helping in the decision for optimal tool replacement policies. [ABSTRACT FROM AUTHOR]

Currently, many fault diagnosis methods for rolling bearings based on deep learning are facing two main challenges. Firstly, the deep learning model exhibits poor diagnostic performance and limited generalization ability in the presence of noise signals and varying loads. Secondly, there is incomplete utilization of fault information and inadequate extraction of fault features, leading to the low diagnostic accuracy of the model. To address these problems, this paper proposes an improved dual-branch convolutional capsule neural network for rolling bearing fault diagnosis. This method converts the collected bearing vibration signals into grayscale images to construct a grayscale image dataset. By fully considering the types of bearing faults and damage diameters, the data are labeled using a dual-label format. A multi-scale convolution module is introduced to extract features from the data and maximize feature information extraction. Additionally, a coordinate attention mechanism is incorporated into this module to better extract useful channel features and enhance feature extraction capability. Based on adaptive fusion between fault type (damage diameter) features and labels, a dual-branch convolutional capsule neural network model for rolling bearing fault diagnosis is established. The model was experimentally validated using both Case Western Reserve University's bearing dataset and self-made datasets. The experimental results demonstrate that the fault type branch of the model achieves an accuracy rate of 99.88%, while the damage diameter branch attains an accuracy rate of 99.72%. Both branches exhibit excellent classification performance and display robustness against noise interference and variable working conditions. In comparison with other algorithm models cited in the reference literature, the diagnostic capability of the model proposed in this study surpasses them. Furthermore, the generalization ability of the model is validated using a self-constructed laboratory dataset, yielding an average accuracy rate of 94.25% for both branches. [ABSTRACT FROM AUTHOR]

In this paper, we continue the research cycle on the properties of convolutional neural network-based image recognition systems and ways to improve noise immunity and robustness. Currently, a popular research area related to artificial neural networks is adversarial attacks. The adversarial attacks on the image are not highly perceptible to the human eye, and they also drastically reduce the neural network's accuracy. Image perception by a machine is highly dependent on the propagation of high frequency distortions throughout the network. At the same time, a human efficiently ignores high-frequency distortions, perceiving the shape of objects as a whole. We propose a technique to reduce the influence of high-frequency noise on the CNNs. We show that low-pass image filtering can improve the image recognition accuracy in the presence of high-frequency distortions in particular, caused by adversarial attacks. This technique is resource efficient and easy to implement. The proposed technique makes it possible to measure up the logic of an artificial neural network to that of a human, for whom high-frequency distortions are not decisive in object recognition. [ABSTRACT FROM AUTHOR]

Machine learning with deep neural networks (DNNs) is widely used for human activity recognition (HAR) to automatically learn features, identify and analyze activities, and to produce a consequential outcome in numerous applications. However, learning robust features requires an enormous number of labeled data. Therefore, implementing a DNN either requires creating a large dataset or needs to use the pre-trained models on different datasets. Multitask learning (MTL) is a machine learning paradigm where a model is trained to perform multiple tasks simultaneously, with the idea that sharing information between tasks can lead to improved performance on each individual task. This paper presents a novel MTL approach that employs combined training for human activities with different temporal scales of atomic and composite activities. Atomic activities are basic, indivisible actions that are readily identifiable and classifiable. Composite activities are complex actions that comprise a sequence or combination of atomic activities. The proposed MTL approach can help in addressing challenges related to recognizing and predicting both atomic and composite activities. It can also help in providing a solution to the data scarcity problem by simultaneously learning multiple related tasks so that knowledge from each task can be reused by the others. The proposed approach offers advantages like improved data efficiency, reduced overfitting due to shared representations, and fast learning through the use of auxiliary information. The proposed approach exploits the similarities and differences between multiple tasks so that these tasks can share the parameter structure, which improves model performance. The paper also figures out which tasks should be learned together and which tasks should be learned separately. If the tasks are properly selected, the shared structure of each task can help it learn more from other tasks. [ABSTRACT FROM AUTHOR]

Because of its long running time, complex working environment, and for other reasons, a gear is prone to failure, and early failure is difficult to detect by direct observation; therefore, fault diagnosis of gears is very necessary. Neural network algorithms have been widely used to realize gear fault diagnosis, but the structure of the neural network model is complicated, the training time is long and the model is not easy to converge. To solve the above problems and combine the advantages of the ResNeXt50 model in the extraction of image features, this paper proposes a gearbox fault detection method that integrates the convolutional block attention module (CBAM). Firstly, the CBAM is embedded in the ResNeXt50 network to enhance the extraction of image channels and spatial features. Secondly, the different time–frequency analysis method was compared and analyzed, and the method with the better effect was selected to convert the one-dimensional vibration signal in the open data set of the gearbox into a two-dimensional image, eliminating the influence of the redundant background noise, and took it as the input of the model for training. Finally, the accuracy and the average training time of the model were obtained by entering the test set into the model, and the results were compared with four other classical convolutional neural network models. The results show that the proposed method performs well both in fault identification accuracy and average training time under two working conditions, and it also provides some references for existing gear failure diagnosis research. [ABSTRACT FROM AUTHOR]

Software defect prediction studies aim to predict defect-prone components before the testing stage of the software development process. The main benefit of these prediction models is that more testing resources can be allocated to fault-prone modules effectively. While a few software defect prediction models have been developed for mobile applications, a systematic overview of these studies is still missing. Therefore, we carried out a Systematic Literature Review (SLR) study to evaluate how machine learning has been applied to predict faults in mobile applications. This study defined nine research questions, and 47 relevant studies were selected from scientific databases to respond to these research questions. Results show that most studies focused on Android applications (i.e., 48%), supervised machine learning has been applied in most studies (i.e., 92%), and object-oriented metrics were mainly preferred. The top five most preferred machine learning algorithms are Naïve Bayes, Support Vector Machines, Logistic Regression, Artificial Neural Networks, and Decision Trees. Researchers mostly preferred Object-Oriented metrics. Only a few studies applied deep learning algorithms including Long Short-Term Memory (LSTM), Deep Belief Networks (DBN), and Deep Neural Networks (DNN). This is the first study that systematically reviews software defect prediction research focused on mobile applications. It will pave the way for further research in mobile software fault prediction and help both researchers and practitioners in this field. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) panels are one of the popular green energy resources and PV panel parameter estimations are one of the popular research topics in PV panel technology. The PV panel parameters could be used for PV panel health monitoring and fault diagnosis. Recently, a PV panel parameters estimation method based in neural network and numerical current predictor methods has been developed. However, in order to further improve the estimation accuracies, a new approach of PV panel parameter estimation is proposed in this paper. The output current and voltage dynamic responses of a PV panel are measured, and the time series of the I–V vectors will be used as input to an artificial neural network (ANN)-based PV model parameter range classifier (MPRC). The MPRC is trained using an I–V dataset with large variations in PV model parameters. The results of MPRC are used to preset the initial particles' population for a particle swarm optimization (PSO) algorithm. The PSO algorithm is used to estimate the PV panel parameters and the results could be used for PV panel health monitoring and the derivation of maximum power point tracking (MMPT). Simulations results based on an experimental I–V dataset and an I–V dataset generated by simulation show that the proposed algorithms can achieve up to 3.5% accuracy and the speed of convergence was significantly improved as compared to a purely PSO approach. [ABSTRACT FROM AUTHOR]

Intelligent compaction (IC) has emerged as a breakthrough technology that utilizes advanced sensing, data transmission, and control systems to optimize asphalt pavement compaction quality and efficiency. However, accurate assessment of compaction status remains challenging under real construction conditions. This paper reviewed recent progress and applications of smart sensors and machine learning (ML) to address existing limitations in IC. The principles and components of various advanced sensors deployed in IC systems were introduced, including SmartRock, fiber Bragg grating, and integrated circuit piezoelectric acceleration sensors. Case studies on utilizing these sensors for particle behavior monitoring, strain measurement, and impact data collection were reviewed. Meanwhile, common ML algorithms including regression, classification, clustering, and artificial neural networks were discussed. Practical examples of applying ML to estimate mechanical properties, evaluate overall compaction quality, and predict soil firmness through supervised and unsupervised models were examined. Results indicated smart sensors have enhanced compaction monitoring capabilities but require robustness improvements. ML provides a data-driven approach to complement traditional empirical methods but necessitates extensive field validation. Potential integration with digital construction technologies such as building information modeling and augmented reality was also explored. In conclusion, leveraging emerging sensing and artificial intelligence presents opportunities to optimize the IC process and address key challenges. However, cooperation across disciplines will be vital to test and refine technologies under real-world conditions. This study serves to advance understanding and highlight priority areas for future research toward the realization of IC's full potential. [ABSTRACT FROM AUTHOR]

Nowadays, trajectory control is a significant issue for unmanned micro aerial vehicles (MAVs) due to large disturbances such as wind and storms. Trajectory control is typically implemented using a proportional–integral–derivative (PID) controller. In order to achieve high accuracy in trajectory tracking, it is essential to set the PID gain parameters to optimum values. For this reason, separate gain values are set for roll, pitch and yaw movements before autonomous flight in quadrotor systems. Traditionally, this adjustment is performed manually or automatically in autotune mode. Given the constraints of narrow orchard corridors, the use of manual or autotune mode is neither practical nor effective, as the quadrotor system has to fly in narrow apple orchard corridors covered with hail nets. These reasons require the development of an innovative solution specific to quadrotor vehicles designed for constrained areas such as apple orchards. This paper recognizes the need for effective trajectory control in quadrotors and proposes a novel neural network-based approach to tuning the optimal PID control parameters. This new approach not only improves trajectory control efficiency but also addresses the unique challenges posed by environments with constrained locational characteristics. Flight simulations using the proposed neural network models have demonstrated successful trajectory tracking performance and highlighted the superiority of the feed-forward back propagation network (FFBPN), especially in latitude tracking within 7.52745 × 10−5 RMSE trajectory error. Simulation results support the high performance of the proposed approach for the development of automatic flight capabilities in challenging environments. [ABSTRACT FROM AUTHOR]

Shadow, a natural phenomenon resulting from the absence of light, plays a pivotal role in agriculture, particularly in processes such as photosynthesis in plants. Despite the availability of generic shadow datasets, many suffer from annotation errors and lack detailed representations of agricultural shadows with possible human activity inside, excluding those derived from satellite or drone views. In this paper, we present an evaluation of a synthetically generated top-down shadow segmentation dataset characterized by photorealistic rendering and accurate shadow masks. We aim to determine its efficacy compared to real-world datasets and assess how factors such as annotation quality and image domain influence neural network model training. To establish a baseline, we trained numerous baseline architectures and subsequently explored transfer learning using various freely available shadow datasets. We further evaluated the out-of-domain performance compared to the training set of other shadow datasets. Our findings suggest that AgroSegNet demonstrates competitive performance and is effective for transfer learning, particularly in domains similar to agriculture. [ABSTRACT FROM AUTHOR]

With the acceleration of urbanisation, urban areas are subject to the combined effects of the accumulation of various natural factors, such as changes in temperature leading to the thermal expansion or contraction of surface materials (rock, soil, etc.) and changes in precipitation and humidity leading to an increase in the self-weight of soil due to the infiltration of water along the cracks or pores in the ground. Therefore, the subsidence of urban areas has now become a serious geological disaster phenomenon. However, the use of traditional neural network prediction models has limitations when examining the causal relationships between time series surface deformation data and multiple influencing factors and when applying multiple influencing factors for predictive analyses. To this end, Sentinel-1A data from March 2017 to February 2023 were used as the data source in this paper, based on time series deformation data acquired using the small baseline subset interferometric synthetic aperture radar (SBAS-InSAR) technique. A sparrow search algorithm–convolutional neural network–long short-term memory (SSA-CNN-LSTM) neural network prediction model was built. The six factors of temperature, humidity, precipitation, and ground temperature at three different depths below the surface (5 cm, 10 cm, and 15 cm) were taken as the input of the model, and the surface deformation data were taken as the output of the neural network model. The correlation between the spatial and temporal evolution characteristics of the ground subsidence in urban areas and various influencing factors was analysed using grey correlation analysis, which proved that these six factors contribute to some extent to the deformation of the urban surface. The main urban area of Hohhot City, Inner Mongolia Autonomous Region, was used as the study area. In order to verify the efficacy of this neural network prediction model, the prediction effects of the multilayer perceptron (MLP), backpropagation (BP), and SSA-CNN-LSTM models were compared and analysed, with the values of the correlation coefficients of the feature points of A1, B1, and C1 being in the range of 0.92, 0.83, and 0.93, respectively. The results show that compared with the traditional MLP and BP neural network models, the SSA-CNN-LSTM model achieves a higher performance in predicting time series surface deformation data in urban areas, which provides new ideas and methods for this area of research. [ABSTRACT FROM AUTHOR]

This document provides summaries of various research papers published in the journal Sensors. The summaries cover a wide range of topics, including personalized medicine, laser ranging, memristive interfaces, face and person detection, IoT data visualization, monitoring elderly activities, auditory illusions, brain connectivity, corona discharges, thermal data analysis, vital signal detection, and eye-blink artifact removal. The document showcases the contributions and findings of each study, offering valuable insights for researchers and library patrons interested in these areas of study. [Extracted from the article]

This study aims to enhance diagnostic capabilities for optimising the performance of the anaerobic sewage treatment lagoon at Melbourne Water's Western Treatment Plant (WTP) through a novel machine learning (ML)-based monitoring strategy. This strategy employs ML to make accurate probabilistic predictions of biogas performance by leveraging diverse real-life operational and inspection sensor and other measurement data for asset management, decision making, and structural health monitoring (SHM). The paper commences with data analysis and preprocessing of complex irregular datasets to facilitate efficient learning in an artificial neural network. Subsequently, a Bayesian mixture density neural network model incorporating an attention-based mechanism in bidirectional long short-term memory (BiLSTM) was developed. This probabilistic approach uses a distribution output layer based on the Gaussian mixture model and Monte Carlo (MC) dropout technique in estimating data and model uncertainties, respectively. Furthermore, systematic hyperparameter optimisation revealed that the optimised model achieved a negative log-likelihood (NLL) of 0.074, significantly outperforming other configurations. It achieved an accuracy approximately 9 times greater than the average model performance (NLL = 0.753) and 22 times greater than the worst performing model (NLL = 1.677). Key factors influencing the model's accuracy, such as the input window size and the number of hidden units in the BiLSTM layer, were identified, while the number of neurons in the fully connected layer was found to have no significant impact on accuracy. Moreover, model calibration using the expected calibration error was performed to correct the model's predictive uncertainty. The findings suggest that the inherent data significantly contribute to the overall uncertainty of the model, highlighting the need for more high-quality data to enhance learning. This study lays the groundwork for applying ML in transforming high-value assets into intelligent structures and has broader implications for ML in asset management, SHM applications, and renewable energy sectors. [ABSTRACT FROM AUTHOR]

In cutting processes, tool condition affects the quality of the manufactured parts. As such, an essential component to prevent unplanned downtime and to assure machining quality is having information about the state of the cutting tool. The primary function of it is to alert the operator that the tool has reached or is reaching a level of wear beyond which behaviour is unreliable. In this paper, the tool condition is being monitored by analysing the electric current on the main spindle via an artificial intelligence model utilising an LSTM neural network. In the current study, the tool is monitored while working on a cylindrical raw piece made of AA6013 aluminium alloy with a custom polycrystalline diamond tool for the purposes of monitoring the wear of these tools. Spindle current characteristics were obtained using external measuring equipment to not influence the operation of the machine included in a larger production line. As a novel approach, an artificial intelligence model based on an LSTM neural network is utilised for the analysis of the spindle current obtained during a manufacturing cycle and assessing the tool wear range in real time. The neural network was designed and trained to notice significant characteristics of the captured current signal. The conducted research serves as a proof of concept for the use of an LSTM neural network-based model as a method of monitoring the condition of cutting tools. [ABSTRACT FROM AUTHOR]