Search

Traditional methods for assessing the cleanliness of liquid metal are characterized by prolonged detection times, delays, and susceptibility to variations in sampling conditions. To address these limitations, an online cleanliness-analyzing system grounded in the method of the electrical sensing zone has been developed. This system facilitates real-time, in situ, and quantitative analysis of inclusion size and amount in liquid metal. Comprising pneumatic, embedded, and host computer modules, the system supports the continuous, online evaluation of metal cleanliness across various metallurgical processes in high-temperature environments. Tests conducted with gallium liquid at 90 °C and aluminum melt at 800 °C have validated the system's ability to precisely and quantitatively detect inclusions in molten metal in real time. The detection procedure is stable and reliable, offering immediate data feedback that effectively captures fluctuations in inclusion amount, thereby meeting the metallurgical industry's demand for real-time analyzing and control of inclusion cleanliness in liquid metal. Additionally, the system was used to analyze inclusion size distribution during the hot-dip galvanizing process. At a zinc melt temperature of 500 °C, it achieved a detection limit of 21 μm, simultaneously providing real-time data on the size and amount distribution of inclusions. This represents a novel strategy for the online monitoring and quality control of zinc slag throughout the hot-dip galvanizing process. [ABSTRACT FROM AUTHOR]

Online monitoring and real-time feedback on inclusions in molten metal are essential for metal quality control. However, existing methods for detecting aluminum melt inclusions face challenges, including interference, prolonged processing times, and latency. This paper presents the design and development of an online monitoring system for molten metal inclusions. Initially, the system facilitates real-time adjustment of signal acquisition parameters through a multiplexer. Subsequently, it employs a detection algorithm capable of swiftly extracting pulse peaks, with this task integrated into our proprietary host computer software to ensure timely detection and data visualization. Ultimately, we developed a monitoring device integrated with this online monitoring system, enabling the online monitoring of the aluminum alloy filtration process. Our findings indicate that the system can accurately measure the size and concentration of inclusions during the filtration process in real time, offering enhanced detection speed and stability compared to the industrial LiMCA CM (liquid metal cleanliness analyzer continuous monitoring) standard. Furthermore, our evaluation of the filtration process demonstrates that the effectiveness of filtration significantly improves with the increase in inclusion sizes, and the synergistic effect of combining CFF (ceramic foam filter) and MCF (metallics cartridge filter) filtration methods exceeds the performance of the CFF method alone. This system thus provides valuable technical support for optimizing filtration processes and controlling inclusion quality. [ABSTRACT FROM AUTHOR]

In the ultrasonic welding system, the ultrasonic power supply drives the piezoelectric transducer to work in the resonant state to realize the conversion of electrical energy into mechanical energy. In order to obtain stable ultrasonic energy and ensure welding quality, this paper designs a driving power supply based on an improved LC matching network with two functions, frequency tracking and power regulation. First, in order to analyze the dynamic branch of the piezoelectric transducer, we propose an improved LC matching network, in which three voltage RMS values are used to analyze the dynamic branch and discriminate the series resonant frequency. Further, the driving power system is designed using the three RMS voltage values as feedback. A fuzzy control method is used for frequency tracking. The double closed-loop control method of the power outer loop and the current inner loop is used for power regulation. Through MATLAB software simulation and experimental testing, it is verified that the power supply can effectively track the series resonant frequency and control the power while being continuously adjustable. This study has promising applications in ultrasonic welding technology with complex loads. [ABSTRACT FROM AUTHOR]

Speech reflects people's mental state and using a microphone sensor is a potential method for human–computer interaction. Speech recognition using this sensor is conducive to the diagnosis of mental illnesses. The gender difference of speakers affects the process of speech emotion recognition based on specific acoustic features, resulting in the decline of emotion recognition accuracy. Therefore, we believe that the accuracy of speech emotion recognition can be effectively improved by selecting different features of speech for emotion recognition based on the speech representations of different genders. In this paper, we propose a speech emotion recognition method based on gender classification. First, we use MLP to classify the original speech by gender. Second, based on the different acoustic features of male and female speech, we analyze the influence weights of multiple speech emotion features in male and female speech, and establish the optimal feature sets for male and female emotion recognition, respectively. Finally, we train and test CNN and BiLSTM, respectively, by using the male and the female speech emotion feature sets. The results show that the proposed emotion recognition models have an advantage in terms of average recognition accuracy compared with gender-mixed recognition models. [ABSTRACT FROM AUTHOR]

With the increasing popularity of smart devices, users can control their mobile phones, TVs, cars, and smart furniture by using voice assistants, but voice assistants are susceptible to intrusion by outsider speakers or playback attacks. In order to address this security issue, a millimeter-wave radar-based voice security authentication system is proposed in this paper. First, the speaker's fine-grained vocal cord vibration signal is extracted by eliminating static object clutter and motion effects; second, the weighted Mel Frequency Cepstrum Coefficients (MFCCs) are obtained as biometric features; and finally, text-independent security authentication is performed by the WMHS (Weighted MFCCs and Hog-based SVM) method. This system is highly adaptable and can authenticate designated speakers, resist intrusion by other unspecified speakers as well as playback attacks, and is secure for smart devices. Extensive experiments have verified that the system achieves a 93.4% speaker verification accuracy and a 5.8% miss detection rate for playback attacks. [ABSTRACT FROM AUTHOR]

Diesel engines have a wide range of functions in the industrial and military fields. An urgent problem to be solved is how to diagnose and identify their faults effectively and timely. In this paper, a diesel engine acoustic fault diagnosis method based on variational modal decomposition mapping Mel frequency cepstral coefficients (MFCC) and long-short-term memory network is proposed. Variational mode decomposition (VMD) is used to remove noise from the original signal and differentiate the signal into multiple modes. The sound pressure signals of different modes are mapped to the Mel filter bank in the frequency domain, and then the Mel frequency cepstral coefficients of the respective mode signals are calculated in the mapping range of frequency domain, and the optimized Mel frequency cepstral coefficients are used as the input of long and short time memory network (LSTM) which is trained and verified, and the fault diagnosis model of the diesel engine is obtained. The experimental part compares the fault diagnosis effects of different feature extraction methods, different modal decomposition methods and different classifiers, finally verifying the feasibility and effectiveness of the method proposed in this paper, and providing solutions to the problem of how to realise fault diagnosis using acoustic signals. [ABSTRACT FROM AUTHOR]

The positioning of indoor electronic devices is an essential part of human–computer interaction, and the accuracy of positioning affects the level of user experience. Most existing methods for RF-based device localization choose to ignore or remove the impact of multipath effects. However, exploiting the multipath effect caused by the complex indoor environment helps to improve the model's localization accuracy. In response to this question, this paper proposes a multipath-assisted localization (MAL) model based on millimeter-wave radar to achieve the localization of indoor electronic devices. The model fully considers the help of the multipath effect when describing the characteristics of the reflected signal and precisely locates the target position by using the MAL area formed by the reflected signal. At the same time, for the situation where the radar in the traditional Single-Input Single-Output (SISO) mode cannot obtain the 3D spatial position information of the target, the advantage of the MAL model is that the 3D information of the target can be obtained after the mining process of the multipath effect. Furthermore, based on the original hardware, it can achieve a breakthrough in angular resolution. Experiments show that our proposed MAL model enables the millimeter-wave multipath positioning model to achieve a 3D positioning error within 15 cm. [ABSTRACT FROM AUTHOR]

Smart sensors, coupled with artificial intelligence (AI)-enabled remote automated monitoring (RAMs), can free a nurse from the task of in-person patient monitoring during the transportation process of patients between different wards in hospital settings. Automation of hospital beds using advanced robotics and sensors has been a growing trend exacerbated by the COVID crisis. In this exploratory study, a polynomial regression (PR) machine learning (ML) RAM algorithm based on a Dreyfusian descriptor for immediate wellbeing monitoring was proposed for the autonomous hospital bed transport (AHBT) application. This method was preferred over several other AI algorithm for its simplicity and quick computation. The algorithm quantified historical data using supervised photoplethysmography (PPG) data for 5 min just before the start of the autonomous journey, referred as pre-journey (PJ) dataset. During the transport process, the algorithm continued to quantify immediate measurements using non-overlapping sets of 30 PPG waveforms, referred as in-journey (IJ) dataset. In combination, this algorithm provided a binary decision condition that determined if AHBT should continue its journey to destination by checking the degree of polynomial (DoP) between PJ and IJ. Wrist PPG was used as algorithm's monitoring parameter. PPG data was collected simultaneously from both wrists of 35 subjects, aged 21 and above in postures mimicking that in AHBT and were given full freedom of upper limb and wrist movement. It was observed that the top goodness-of-fit which indicated potentials for high data accountability had 0.2 to 0.6 cross validation score mean (CVSM) occurring at 8th to 10th DoP for PJ datasets and 0.967 to 0.994 CVSM at 9th to 10th DoP for IJ datasets. CVSM was a reliable metric to pick out the best PJ and IJ DoPs. Central tendency analysis showed that coinciding DoP distributions between PJ and IJ datasets, peaking at 8th DoP, was the precursor to high algorithm stability. Mean algorithm efficacy was 0.20 as our proposed algorithm was able to pick out all signals from a conscious subject having full freedom of movement. This efficacy was acceptable as a first ML proof of concept for AHBT. There was no observable difference between subjects' left and right wrists. [ABSTRACT FROM AUTHOR]

This paper describes the steps involved in obtaining a set of relevant data sources and the accompanying method using software-based sensors to detect anomalous behavior in modern smartphones based on machine-learning classifiers. Three classes of models are investigated for classification: logistic regressions, shallow neural nets, and support vector machines. The paper details the design, implementation, and comparative evaluation of all three classes. If necessary, the approach could be extended to other computing devices, if appropriate changes were made to the software infrastructure, based upon mandatory capabilities of the underlying hardware. [ABSTRACT FROM AUTHOR]

In the process of rehabilitation training for stroke patients, the rehabilitation effect is positively affected by how much physical activity the patients take part in. Most of the signals used to measure the patients' participation are EMG signals or oxygen consumption, which increase the cost and the complexity of the robotic device. In this work, we design a multi-sensor system robot with torque and six-dimensional force sensors to gauge the patients' participation in training. By establishing the static equation of the mechanical leg, the man–machine interaction force of the patient can be accurately extracted. Using the impedance model, the auxiliary force training mode is established, and the difficulty of the target task is changed by adjusting the K value of auxiliary force. Participation models with three intensities were developed offline using support vector machines, for which the C and σ parameters are optimized by the hybrid quantum particle swarm optimization and support vector machines (Hybrid QPSO-SVM) algorithm. An experimental statistical analysis was conducted on ten volunteers' motion representation in different training tasks, which are divided into three stages: over-challenge, challenge, less challenge, by choosing characteristic quantities with significant differences among the various difficulty task stages, as a training set for the support vector machines (SVM). Experimental results from 12 volunteers, with tasks conducted on the lower limb rehabilitation robot LLR-II show that the rehabilitation robot can accurately predict patient participation and training task difficulty. The prediction accuracy reflects the superiority of the Hybrid QPSO-SVM algorithm. [ABSTRACT FROM AUTHOR]

In the wild, wireless multimedia sensor network (WMSN) communication has limited bandwidth and the transmission of wildlife monitoring images always suffers signal interference, which is time-consuming, or sometimes even causes failure. Generally, only part of each wildlife image is valuable, therefore, if we could transmit the images according to the importance of the content, the above issues can be avoided. Inspired by the progressive transmission strategy, we propose a hierarchical coding progressive transmission method in this paper, which can transmit the saliency object region (i.e. the animal) and its background with different coding strategies and priorities. Specifically, we firstly construct a convolution neural network via the MobileNet model for the detection of the saliency object region and obtaining the mask on wildlife. Then, according to the importance of wavelet coefficients, set partitioned in hierarchical tree (SPIHT) lossless coding is utilized to transmit the saliency image which ensures the transmission accuracy of the wildlife region. After that, the background region left over is transmitted via the Embedded Zerotree Wavelets (EZW) lossy coding strategy, to improve the transmission efficiency. To verify the efficiency of our algorithm, a demonstration of the transmission of field-captured wildlife images is presented. Further, comparison of results with existing EZW and discrete cosine transform (DCT) algorithms shows that the proposed algorithm improves the peak signal to noise ratio (PSNR) and structural similarity index (SSIM) by 21.11%, 14.72% and 9.47%, 6.25%, respectively. [ABSTRACT FROM AUTHOR]