Search

Dynamic visual vending machines are rapidly growing in popularity, offering convenience and speed to customers. However, there is a prevalent issue with consumers damaging goods and then returning them to the machine, severely affecting business interests. This paper addresses the issue from the standpoint of defect detection. Although existing industrial defect detection algorithms, such as PatchCore, perform well, they face challenges, including handling goods in various orientations, detection speeds that do not meet real-time monitoring requirements, and complex backgrounds that hinder detection accuracy. These challenges hinder their application in dynamic vending environments. It is crucial to note that efficient visual features play a vital role in memory banks, yet current memory repositories for industrial inspection algorithms do not adequately address the problem of location-specific feature redundancy. To tackle these issues, this paper introduces a novel defect detection algorithm for goods using adaptive subsampling and partitioned memory banks. Firstly, Grad-CAM is utilized to extract deep features, which, in combination with shallow features, mitigate the impact of complex backgrounds on detection accuracy. Next, graph convolutional networks extract rotationally invariant features. The adaptive subsampling partitioned memory bank is then employed to store features of non-defective goods, which reduces memory consumption and enhances training speed. Experimental results on the MVTec AD dataset demonstrate that the proposed algorithm achieves a marked improvement in detection speed while maintaining accuracy that is comparable to state-of-the-art models. [ABSTRACT FROM AUTHOR]

Smart grids integrate information and communications technology into the processes of electricity production, transportation, and consumption, thereby enabling interactions between power suppliers and consumers to increase the efficiency of the power grid. To achieve this, smart meters (SMs) are installed in households or buildings to measure electricity usage and allow power suppliers or consumers to monitor and manage it in real time. However, SMs require a secure service to address malicious attacks during memory protection and communication processes and a lightweight communication protocol suitable for devices with computational and communication constraints. This paper proposes an authentication protocol based on a one-way hash function to address these issues. This protocol includes message authentication functions to address message tampering and uses a changing encryption key for secure communication during each transmission. The security and performance analysis of this protocol shows that it can address existing attacks and provides 105,281.67% better computational efficiency than previous methods. [ABSTRACT FROM AUTHOR]

The success of the Internet of Things (IoT) has driven the development, among others, of many different software architectures for producing, processing, and analyzing heterogeneous data. In many cases, IoT applications share common features, such as the use of a platform or middleware, also known as message broker, that collects and manages data traffic between endpoints. However, in general, data processing is very dependent on the case study (sensors that send temperature data, drones that send images, etc.). Thus, the applications responsible for receiving and processing data, which we call consumers, have to be built ad hoc, since some of their elements have to be specially configured to solve specific needs of the case study. This paper presents Flextory, a software factory tool to make it easier for IoT developers to automatically construct configurable consumer applications, which we call FLEX-consumers. Flextory guides developers through the process of generating Java consumers by selecting some desired features such as, for instance, the particular communication protocol to be used. This way, the developer only has to concentrate on designing the algorithm to process the data. In short, the use of Flextory will result in consumer applications with configurable behavior, namely FLEX-consumers, that can connect to a messaging server (for example RabbitMQ) and process the received messages. [ABSTRACT FROM AUTHOR]

The deregulation process of the electricity sector has led to competition in wholesale and retail markets. In particular, retailers submit bids to wholesale markets to satisfy the energy needs associated with portfolios of end-use customers. This paper describes a strategic process for retailers bidding in a wholesale market composed of a day-ahead market, an intraday market, and a balancing market. It considers a market design that involves a hybrid model for the intraday market, based on daily auctions and a continuous procedure. The paper also presents a computational study to illustrate and test both the market design and the strategic bidding process of retailers. The results confirm the advantages of considering a continuous intraday market, show that bidding in short-term markets is more beneficial than bidding in medium-term markets, and indicate important aspects to consider when selecting customers to add to the portfolios of retailers. [ABSTRACT FROM AUTHOR]

The term out-of-stock (OOS) describes a problem that occurs when shoppers come to a store and the product they are seeking is not present on its designated shelf. Missing products generate huge sales losses and may lead to a declining reputation or the loss of loyal customers. In this paper, we propose a novel deep-learning (DL)-based OOS-detection method that utilizes a two-stage training process and a post-processing technique designed for the removal of inaccurate detections. To develop the method, we utilized an OOS detection dataset that contains a commonly used fully empty OOS class and a novel class that represents the frontal OOS. We present a new image augmentation procedure in which some existing OOS instances are enlarged by duplicating and mirroring themselves over nearby products. An object-detection model is first pre-trained using only augmented shelf images and, then, fine-tuned on the original data. During the inference, the detected OOS instances are post-processed based on their aspect ratio. In particular, the detected instances are discarded if their aspect ratio is higher than the maximum or lower than the minimum instance aspect ratio found in the dataset. The experimental results showed that the proposed method outperforms the existing DL-based OOS-detection methods and detects fully empty and frontal OOS instances with 86.3% and 83.7% of the average precision, respectively. [ABSTRACT FROM AUTHOR]

It is a known fact that large quantities of farm and meat products rot and are wasted if correct actions are not taken, which may lead to serious health issues if consumed. There is no proper system for tracking and communicating the status of the goods to their respective stakeholders in a secure way. Consumers have every right to know the quality of the products they consume. Using monitoring tools, such as the Internet of Agricultural Things (IoAT), and modern data protection techniques for storing and sharing, will help mitigate data integrity issues during the transmission of sensor records, increasing the data quality. The visibility state at the customer end is also improved, and they are aware of the agricultural product's conditions throughout the real-time distribution process. In this paper, we developed and implemented a CorDapp application to manage the data for the supply chain, called "agroString". We collected the temperature and humidity data using IoAT-Edge devices and various datasets from multiple sources. We then sent those readings to the CorDapp agroString and successfully shared them among the relevant parties. With the help of a Corda private blockchain, we attempted to increase data integrity, trust, visibility, provenance, and quality at each logistic step, while decreasing blockchain and central system limitations. [ABSTRACT FROM AUTHOR]

Smart metering systems (SMSs) have been widely used by industrial users and residential customers for purposes such as real-time tracking, outage notification, quality monitoring, load forecasting, etc. However, the consumption data it generates can violate customers' privacy through absence detection or behavior recognition. Homomorphic encryption (HE) has emerged as one of the most promising methods to protect data privacy based on its security guarantees and computability over encrypted data. However, SMSs have various application scenarios in practice. Consequently, we used the concept of trust boundaries to help design HE solutions for privacy protection under these different scenarios of SMSs. This paper proposes a privacy-preserving framework as a systematic privacy protection solution for SMSs by implementing HE with trust boundaries for various SMS scenarios. To show the feasibility of the proposed HE framework, we evaluated its performance on two computation metrics, summation and variance, which are often used for billing, usage predictions, and other related tasks. The security parameter set was chosen to provide a security level of 128 bits. In terms of performance, the aforementioned metrics could be computed in 58,235 ms for summation and 127,423 ms for variance, given a sample size of 100 households. These results indicate that the proposed HE framework can protect customer privacy under varying trust boundary scenarios in SMS. The computational overhead is acceptable from a cost–benefit perspective while ensuring data privacy. [ABSTRACT FROM AUTHOR]

Recently, novel networking architectures have emerged to cope with the fast-evolving and new Internet utilisation patterns. Information-Centric Networking (ICN) is a prominent example of this architecture. By perceiving content as the core element of the networking functionalities, ICN opens up a whole new avenue of information exchange optimisation possibilities. This paper presents an approach that progresses the base operation of ICN and leverages content identification right at the network layer, allowing to selectively retrieve partial pieces of information from content already present in ICN in-network caches. Additionally, this proposal enables information producers to seamlessly offload some content processing tasks into the network. The concept is discussed and demonstrated through a proof-of-concept prototype targeting an Internet of Things (IoT) scenario, where consumers retrieve specific pieces of the whole information generated by sensors. The obtained results showcase reduced traffic and storage consumption at the core of the network. [ABSTRACT FROM AUTHOR]

To provide analytic materials for business management for smart retail solutions, it is essential to recognize various customer behaviors (CB) from video footage acquired by in-store cameras. Along with frequent changes in needs and environments, such as promotion plans, product categories, in-store layouts, etc., the targets of customer behavior recognition (CBR) also change frequently. Therefore, one of the requirements of the CBR method is the flexibility to adapt to changes in recognition targets. However, existing approaches, mostly based on machine learning, usually take a great deal of time to re-collect training data and train new models when faced with changing target CBs, reflecting their lack of flexibility. In this paper, we propose a CBR method to achieve flexibility by considering CB in combination with primitives. A primitive is a unit that describes an object's motion or multiple objects' relationships. The combination of different primitives can characterize a particular CB. Since primitives can be reused to define a wide range of different CBs, our proposed method is capable of flexibly adapting to target CB changes in retail stores. In experiments undertaken, we utilized both our collected laboratory dataset and the public MERL dataset. We changed the combination of primitives to cope with the changes in target CBs between different datasets. As a result, our proposed method achieved good flexibility with acceptable recognition accuracy. [ABSTRACT FROM AUTHOR]

The development of the Internet of Things (IoT) has accelerated research in indoor navigation systems, a majority of which rely on adequate wireless signals and sources. Nonetheless, deploying such a system requires periodic site-survey, which is time consuming and labor intensive. To address this issue, in this paper we present Canoe, an indoor navigation system that considers shopping mall scenarios. In our system, we do not assume any prior knowledge, such as floor-plan or the shop locations, access point placement or power settings, historical RSS measurements or fingerprints, etc. Instead, Canoe requires only that the shop owners collect and publish RSS values at the entrances of their shops and can direct a consumer to any of these shops by comparing the observed RSS values. The locations of the consumers and the shops are estimated using maximum likelihood estimation. In doing this, the direction of the target shop relative to the current orientation of the consumer can be precisely computed, such that the direction that a consumer should move can be determined. We have conducted extensive simulations using a real-world dataset. Our experiments in a real shopping mall demonstrate that if 50% of the shops publish their RSS values, Canoe can precisely navigate a consumer within 30 s, with an error rate below 9%. [ABSTRACT FROM AUTHOR]

One of the fundamental tasks of electric distribution utilities is guaranteeing a continuous supply of electricity to their customers. The primary distribution network is a critical part of these facilities because a fault in it could affect thousands of customers. However, the complexity of this network has been increased with the irruption of distributed generation, typical in a Smart Grid and which has significantly complicated some of the analyses, making it impossible to apply traditional techniques. This problem is intensified in underground lines where access is limited. As a possible solution, this paper proposes to make a deployment of a distributed sensor network along the power lines. This network proposes taking advantage of its distributed character to support new approaches of these analyses. In this sense, this paper describes the aquiculture of the proposed network (adapted to the power grid) based on nodes that use power line communication and energy harvesting techniques. In this sense, it also describes the implementation of a real prototype that has been used in some experiments to validate this technological adaptation. Additionally, beyond a simple use for monitoring, this paper also proposes the use of this approach to solve two typical distribution system operator problems, such as: fault location and failure forecasting in power cables. [ABSTRACT FROM AUTHOR]

In today's competitive landscape, achieving customer-centricity is paramount for the sustainable growth and success of organisations. This research is dedicated to understanding customer preferences in the context of the Internet of things (IoT) and employs a two-part modeling approach tailored to this digital era. In the first phase, we leverage the power of the self-organizing map (SOM) algorithm to segment IoT customers based on their connected device usage patterns. This segmentation approach reveals three distinct customer clusters, with the second cluster demonstrating the highest propensity for IoT device adoption and usage. In the second phase, we introduce a robust decision tree methodology designed to prioritize various factors influencing customer satisfaction in the IoT ecosystem. We employ the classification and regression tree (CART) technique to analyze 17 key questions that assess the significance of factors impacting IoT device purchase decisions. By aligning these factors with the identified IoT customer clusters, we gain profound insights into customer behaviour and preferences in the rapidly evolving world of connected devices. This comprehensive analysis delves into the factors contributing to customer retention in the IoT space, with a strong emphasis on crafting logical marketing strategies, enhancing customer satisfaction, and fostering customer loyalty in the digital realm. Our research methodology involves surveys and questionnaires distributed to 207 IoT users, categorizing them into three distinct IoT customer groups. Leveraging analytical statistical methods, regression analysis, and IoT-specific tools and software, this study rigorously evaluates the factors influencing IoT device purchases. Importantly, this approach not only effectively clusters the IoT customer relationship management (IoT-CRM) dataset but also provides valuable visualisations that are essential for understanding the complex dynamics of the IoT customer landscape. Our findings underscore the critical role of logical marketing strategies, customer satisfaction, and customer loyalty in enhancing customer retention in the IoT era. This research offers a significant contribution to businesses seeking to optimize their IoT-CRM strategies and capitalize on the opportunities presented by the IoT ecosystem. [ABSTRACT FROM AUTHOR]

Every day, millions of tons of temperature-sensitive goods are produced, transported, stored or distributed worldwide, thus making their temperature and humidity control essential. Quality control and monitoring of goods during the cold chain is an increasing concern for producers, suppliers, logistic decision makers and consumers. In this paper we present the results of a combination of RFID and WSN devices in a set of studies performed in three commercial wholesale chambers of 1848 m³ with different set points and products. Up to 90 semi-passive RFID temperature loggers were installed simultaneously together with seven motes, during one week in each chamber. 3D temperature mapping charts were obtained and also the psychrometric data model from ASABE was implemented for the calculation of enthalpy changes and the absolute water content of air. Thus thank to the feedback of data, between RFID and WSN it is possible to estimate energy consumption in the cold room, water loss from the products and detect any condensation over the stored commodities. [ABSTRACT FROM AUTHOR]

Visual tracking and attribute estimation related to age or gender information of multiple person entities in a scene are mature research topics with the advent of deep learning techniques. However, when it comes to indoor images such as video sequences of retail consumers, data are not always adequate or accurate enough to essentially train effective models for consumer detection and tracking under various adverse factors. This in turn affects the quality of recognizing age or gender for those detected instances. In this work, we introduce two novel datasets: Consumers comprises 145 video sequences compliant to personal information regulations as far as facial images are concerned and BID is a set of cropped body images from each sequence that can be used for numerous computer vision tasks. We also propose an end-to-end framework which comprises CNNs as object detectors, LSTMs for motion forecasting of the tracklet association component in a sequence, along with a multi-attribute classification model for apparent demographic estimation of the detected outputs, aiming to capture useful metadata of consumer product preferences. Obtained results on tracking and age/gender prediction are promising with respect to reference systems while they indicate the proposed model's potential for practical consumer metadata extraction. [ABSTRACT FROM AUTHOR]

Compared with the gold standard, polysomnography (PSG), and silver standard, actigraphy, contactless consumer sleep-tracking devices (CCSTDs) are more advantageous for implementing large-sample and long-period experiments in the field and out of the laboratory due to their low price, convenience, and unobtrusiveness. This review aimed to examine the effectiveness of CCSTDs application in human experiments. A systematic review and meta-analysis (PRISMA) of their performance in monitoring sleep parameters were conducted (PROSPERO: CRD42022342378). PubMed, EMBASE, Cochrane CENTRALE, and Web of Science were searched, and 26 articles were qualified for systematic review, of which 22 provided quantitative data for meta-analysis. The findings show that CCSTDs had a better accuracy in the experimental group of healthy participants who wore mattress-based devices with piezoelectric sensors. CCSTDs' performance in distinguishing waking from sleeping epochs is as good as that of actigraphy. Moreover, CCSTDs provide data on sleep stages that are not available when actigraphy is used. Therefore, CCSTDs could be an effective alternative tool to PSG and actigraphy in human experiments. [ABSTRACT FROM AUTHOR]

Customer segmentation has been a hot topic for decades, and the competition among businesses makes it more challenging. The recently introduced Recency, Frequency, Monetary, and Time (RFMT) model used an agglomerative algorithm for segmentation and a dendrogram for clustering, which solved the problem. However, there is still room for a single algorithm to analyze the data's characteristics. The proposed novel approach model RFMT analyzed Pakistan's largest e-commerce dataset by introducing k-means, Gaussian, and Density-Based Spatial Clustering of Applications with Noise (DBSCAN) beside agglomerative algorithms for segmentation. The cluster is determined through different cluster factor analysis methods, i.e., elbow, dendrogram, silhouette, Calinsky–Harabasz, Davies–Bouldin, and Dunn index. They finally elected a stable and distinctive cluster using the state-of-the-art majority voting (mode version) technique, which resulted in three different clusters. Besides all the segmentation, i.e., product categories, year-wise, fiscal year-wise, and month-wise, the approach also includes the transaction status and seasons-wise segmentation. This segmentation will help the retailer improve customer relationships, implement good strategies, and improve targeted marketing. [ABSTRACT FROM AUTHOR]

The large bandwidths that are available at millimeter-wave frequencies enable fixed wireless access (FWA) applications, in which fixed point-to-point wireless links are used to provide internet connectivity. In FWA networks, a wireless mesh is created and data are routed from the customer premises equipment (CPE) towards the point of presence (POP), which is the interface with the wired internet infrastructure. The performance of the wireless links depends on the radio propagation characteristics, as well as the wireless technology that is used. The radio propagation characteristics depend on the environment and on the considered frequency. In this work, we analyzed the network characteristics of FWA networks using radio propagation models for different wireless technologies using millimeter-wave (mmWave) frequencies of 28 GHz, 60 GHz, and 140 GHz. Different scenarios and environments were considered, and the influence of rain, vegetation, and the number of subscribers was investigated. A network planning algorithm is presented that defines a route for each CPE towards the POP based on a predefined location of customer devices and considering the available capacity of the wireless links. Rain does not have a considerable effect on the system capacity. Even though the higher frequencies exhibit a larger path loss, resulting in a lower power of the received signal, the larger bandwidths enable a higher channel capacity. [ABSTRACT FROM AUTHOR]

Traditional advertising techniques seek to govern the consumer's opinion toward a product, which may not reflect their actual behavior at the time of purchase. It is probable that advertisers misjudge consumer behavior because predicted opinions do not always correspond to consumers' actual purchase behaviors. Neuromarketing is the new paradigm of understanding customer buyer behavior and decision making, as well as the prediction of their gestures for product utilization through an unconscious process. Existing methods do not focus on effective preprocessing and classification techniques of electroencephalogram (EEG) signals, so in this study, an effective method for preprocessing and classification of EEG signals is proposed. The proposed method involves effective preprocessing of EEG signals by removing noise and a synthetic minority oversampling technique (SMOTE) to deal with the class imbalance problem. The dataset employed in this study is a publicly available neuromarketing dataset. Automated features were extracted by using a long short-term memory network (LSTM) and then concatenated with handcrafted features like power spectral density (PSD) and discrete wavelet transform (DWT) to create a complete feature set. The classification was done by using the proposed hybrid classifier that optimizes the weights of two machine learning classifiers and one deep learning classifier and classifies the data between like and dislike. The machine learning classifiers include the support vector machine (SVM), random forest (RF), and deep learning classifier (DNN). The proposed hybrid model outperforms other classifiers like RF, SVM, and DNN and achieves an accuracy of 96.89%. In the proposed method, accuracy, sensitivity, specificity, precision, and F1 score were computed to evaluate and compare the proposed method with recent state-of-the-art methods. [ABSTRACT FROM AUTHOR]

This article aims to provide in-depth insight into how consumers perceive recycled materials in comparison with natural raw materials at both the perceptual and attitudinal levels. To this end, we combined classic self-reported measures of sensory aspects, preferences, environmental attitudes, and consumption habits together with physiological measures of cognitive–emotional processing. Three different materials—two recycled materials, M2 and M3, and one raw material, M1—were chosen for inspection through three different sensory conditions, which we refer to as channels —visual, tactile, and visuo-tactile. The assignation of materials to sensory channels was counterbalanced so that each participant evaluated only one of the materials per channel. Although participants in general were not very accurate in discriminating between the materials, self-reported sensory evaluations showed that M3 (a recycled material that is made to look non-recycled), was clearly less liked. Meanwhile, the psychophysiological analyses revealed higher levels of electrodermal activity for the tactile evaluations of both recycled materials (M2 and M3). Finally, the results from the attitudes and habits evaluations indicate that the participants had positive environmental attitudes yet poor consumption habits. Altogether, these results suggest that some sensorial properties differ between recycled materials and natural raw materials and that there is a chance to improve and implement new consumption habits. The implications of these results are further discussed both in terms of suggestions for designers and methodological recommendations for researchers. [ABSTRACT FROM AUTHOR]

Owing to high competition in e-commerce, customers may prefer sites that ensure that good user experience (UX) and website aesthetics are one of its qualities. The method of presenting items seems crucial for gaining and maintaining user attention. We conducted a task-based user eye-tracking study with n = 30 participants to examine two variants of an online fashion store: one based on aesthetic rules and one defying them. The following aspects of item presentation were considered: height and width the ratio of product photos, website colors, rounded borders, text visibility, spacing between elements, and smooth animation. We investigated their relationship to user attention by analyzing gaze fixation, tracking user interest, and conducting a supplementary survey. Experimental results showed that owing to following the rules of aesthetics in interface design in the presented fashion shopping scenario, elements such as the recommendation area and product highlights had a significant positive impact on customer attention. [ABSTRACT FROM AUTHOR]

E-commerce systems experience poor quality of performance when the number of records in the customer database increases due to the gradual growth of customers and products. Applying implicit hidden features into the recommender system (RS) plays an important role in enhancing its performance due to the original dataset's sparseness. In particular, we can comprehend the relationship between products and customers by analyzing the hierarchically expressed hidden implicit features of them. Furthermore, the effectiveness of rating prediction and system customization increases when the customer-added tag information is combined with hierarchically structured hidden implicit features. For these reasons, we concentrate on early grouping of comparable customers using the clustering technique as a first step, and then, we further enhance the efficacy of recommendations by obtaining implicit hidden features and combining them via customer's tag information, which regularizes the deep-factorization procedure. The idea behind the proposed method was to cluster customers early via a customer rating matrix and deeply factorize a basic WNMF (weighted nonnegative matrix factorization) model to generate customers preference's hierarchically structured hidden implicit features and product characteristics in each cluster, which reveals a deep relationship between them and regularizes the prediction procedure via an auxiliary parameter (tag information). The testimonies and empirical findings supported the viability of the proposed approach. Especially, MAE of the rating prediction was 0.8011 with 60% training dataset size, while the error rate was equal to 0.7965 with 80% training dataset size. Moreover, MAE rates were 0.8781 and 0.9046 in new 50 and 100 customer cold-start scenarios, respectively. The proposed model outperformed other baseline models that independently employed the major properties of customers, products, or tags in the prediction process. [ABSTRACT FROM AUTHOR]

This review paper discusses the trends and projections for wearable technology in the consumer sports sector (excluding professional sport). Analyzing the role of wearable technology for different users and why there is such a need for these devices in everyday lives. It shows how different sensors are influential in delivering a variety of readings that are useful in many ways regarding sport attributes. Wearables are increasing in function, and through integrating technology, users are gathering more data about themselves. The amount of wearable technology available is broad, each having its own role to play in different industries. Inertial measuring unit (IMU) and Global Positioning System (GPS) sensors are predominantly present in sport wearables but can be programmed for different needs. In this review, the differences are displayed to show which sensors are compatible and which ones can evolve sensor technology for sport applications. [ABSTRACT FROM AUTHOR]

Virtual reality (VR) is emerging as one of key applications in future fifth-generation (5G) networks. Uploading VR video in 5G network is expected to boom in near future, as general consumers could generate high-quality VR videos with portable 360-degree cameras and are willing to share with others. Heterogeneous networks integrating with 5G cloud-radio access networks (H-CRAN) provides high transmission rate for VR video uploading. To address the motion characteristic of UE (User Equipments) and small cell feature of 5G H-CRAN, in this paper we proposed a content-sensing based resource allocation scheme for delay-sensitive VR video uploading in 5G H-CRAN, in which the source coding rate of uploading VR video is determined by the centralized RA scheduling. This scheme jointly optimizes g-NB group resource allocation, RHH/g-NB association, sub-channel assignment, power allocation, and tile encoding rate assignment as formulated in a mixed-integer nonlinear problem (MINLP). To solve the problem, a three stage algorithm is proposed. Dynamic g-NB group resource allocation is first performed according to the UE density of each group. Then, joint RRH/g-NB association, sub-channel allocation and power allocation is performed by an iterative process. Finally, encoding tile rate is assigned to optimize the target objective by adopting convex optimization toolbox. The simulation results show that our proposed algorithm ensures the total utility of system under the constraint of maximum transmission delay and power, which also with low complexity and faster convergence. [ABSTRACT FROM AUTHOR]

Semantically rich indoor models are increasingly used throughout a facility's life cycle for different applications. With the decreasing price of 3D sensors, it is convenient to acquire point cloud data from consumer-level scanners. However, most existing methods in 3D indoor reconstruction from point clouds involve a tedious manual or interactive process due to line-of-sight occlusions and complex space structures. Using the multiple types of data obtained by RGB-D devices, this paper proposes a fast and automatic method for reconstructing semantically rich indoor 3D building models from low-quality RGB-D sequences. Our method is capable of identifying and modelling the main structural components of indoor environments such as space, wall, floor, ceilings, windows, and doors from the RGB-D datasets. The method includes space division and extraction, opening extraction, and global optimization. For space division and extraction, rather than distinguishing room spaces based on the detected wall planes, we interactively define the start-stop position for each functional space (e.g., room, corridor, kitchen) during scanning. Then, an interior elements filtering algorithm is proposed for wall component extraction and a boundary generation algorithm is used for space layout determination. For opening extraction, we propose a new noise robustness method based on the properties of convex hull, octrees structure, Euclidean clusters and the camera trajectory for opening generation, which is inapplicable to the data collected in the indoor environments due to inevitable occlusion. A global optimization approach for planes is designed to eliminate the inconsistency of planes sharing the same global plane, and maintain plausible connectivity between the walls and the relationships between the walls and openings. The final model is stored according to the CityGML3.0 standard. Our approach allows for the robust generation of semantically rich 3D indoor models and has strong applicability and reconstruction power for complex real-world datasets. [ABSTRACT FROM AUTHOR]

Recent research on non-intrusive load monitoring, or load disaggregation, suggests that the performance of algorithms can be affected by factors beyond energy data. In particular, by incorporating non-electric data in load disaggregation analysis, such as building and consumer characteristics, the estimation accuracy of consumption data may be improved. However, this association has rarely been explored in the literature. This work proposes a data-centric methodology for measuring the effect of non-electric characteristics on load disaggregation performance. A real-world dataset is considered for evaluating the proposed methodology, using various appliances and sample rates. The methodology results indicate that the non-electric characteristics may have varying effects on the performances of different building appliances. Therefore, the proposed methodology can be relevant for complementing load disaggregation analysis. [ABSTRACT FROM AUTHOR]

Resource constraint Consumer Internet of Things (CIoT) is controlled through gateway devices (e.g., smartphones, computers, etc.) that are connected to Mobile Edge Computing (MEC) servers or cloud regulated by a third party. Recently Machine Learning (ML) has been widely used in automation, consumer behavior analysis, device quality upgradation, etc. Typical ML predicts by analyzing customers' raw data in a centralized system which raises the security and privacy issues such as data leakage, privacy violation, single point of failure, etc. To overcome the problems, Federated Learning (FL) developed an initial solution to ensure services without sharing personal data. In FL, a centralized aggregator collaborates and makes an average for a global model used for the next round of training. However, the centralized aggregator raised the same issues, such as a single point of control leaking the updated model and interrupting the entire process. Additionally, research claims data can be retrieved from model parameters. Beyond that, since the Gateway (GW) device has full access to the raw data, it can also threaten the entire ecosystem. This research contributes a blockchain-controlled, edge intelligence federated learning framework for a distributed learning platform for CIoT. The federated learning platform allows collaborative learning with users' shared data, and the blockchain network replaces the centralized aggregator and ensures secure participation of gateway devices in the ecosystem. Furthermore, blockchain is trustless, immutable, and anonymous, encouraging CIoT end users to participate. We evaluated the framework and federated learning outcomes using the well-known Stanford Cars dataset. Experimental results prove the effectiveness of the proposed framework. [ABSTRACT FROM AUTHOR]

Real-time dense mapping systems have been developed since the birth of consumer RGB-D cameras. Currently, there are two commonly used models in dense mapping systems: truncated signed distance function (TSDF) and surfel. The state-of-the-art dense mapping systems usually work fine with small-sized regions. The generated dense surface may be unsatisfactory around the loop closures when the system tracking drift grows large. In addition, the efficiency of the system with surfel model slows down when the number of the model points in the map becomes large. In this paper, we propose to use two maps in the dense mapping system. The RGB-D images are integrated into a local surfel map. The old surfels that reconstructed in former times and far away from the camera frustum are moved from the local map to the global map. The updated surfels in the local map when every frame arrives are kept bounded. Therefore, in our system, the scene that can be reconstructed is very large, and the frame rate of our system remains high. We detect loop closures and optimize the pose graph to distribute system tracking drift. The positions and normals of the surfels in the map are also corrected using an embedded deformation graph so that they are consistent with the updated poses. In order to deal with large surface deformations, we propose a new method for constructing constraints with system trajectories and loop closure keyframes. The proposed new method stabilizes large-scale surface deformation. Experimental results show that our novel system behaves better than the prior state-of-the-art dense mapping systems. [ABSTRACT FROM AUTHOR]

Commercial self-monitoring devices are becoming increasingly popular, and over the last decade, the use of self-monitoring technology has spread widely in both consumer and medical markets. The purpose of this study was to evaluate five commercially available self-monitoring devices for further testing in clinical applications. Four activity trackers and one sleep tracker were evaluated based on step count validity and heart rate validity. Methods: The study enrolled 22 healthy volunteers in a walking test. Volunteers walked a 100 m track at 2 km/h and 3.5 km/h. Steps were measured by four activity trackers and compared to gyroscope readings. Two trackers were also tested on nine subjects by comparing pulse readings to Holter monitoring. Results: The lowest average systematic error in the walking tests was -0.2%, recorded on the Garmin Vivofit 2 at 3.5 km/h; the highest error was the Fitbit Charge HR at 2 km/h with an error margin of 26.8%. Comparisons of pulse measurements from the Fitbit Charge HR revealed a margin error of -3.42% ± 7.99% compared to the electrocardiogram. The Beddit sleep tracker measured a systematic error of -3.27% ± 4.60%. Conclusion: The measured results revealed the current functionality and limitations of the five self-tracking devices, and point towards a need for future research in this area. [ABSTRACT FROM AUTHOR]

Various GNSS applications require low-cost, small-scale, lightweight and power-saving GNSS devices and require high precision in terms of low noise for carrier phase and code observations. Applications vary from navigation approaches to positioning in geo-monitoring units up to integration in multi-sensor-systems. For highest precision, only GNSS receivers are suitable that provide access to raw data such as carrier phase, code ranges, Doppler and signal strength. A system integration is only possible if the overall noise level is known and quantified at the level of the original observations. A benchmark analysis based on a zero baseline is proposed to quantify the stochastic properties. The performance of the consumer grade GNSS receiver is determined and evaluated against geodetic GNSS receivers to better understand the utilization of consumer grade receivers. Results indicate high similarity to the geodetic receiver, even though technical limitations are present. Various stochastic techniques report normally distributed carrier-phase noise of 2 mm and code-range noise of 0.5–0.8 m. This is confirmed by studying the modified Allan standard deviation and code-minus-carrier combinations. Derived parameters serve as important indicators for the integration of GNSS receivers into multi-sensor-systems. [ABSTRACT FROM AUTHOR]

Analyses of user experience in the electronic entertainment industry currently rely on self-reporting methods, such as surveys, ratings, focus group interviews, etc. We argue that self-reporting alone carries inherent problems—mainly the misinterpretation and temporal delay during longer experiments—and therefore, should not be used as a sole metric. To tackle this problem, we propose the possibility of modeling consumer experience using psychophysiological measures and demonstrate how such models can be trained using machine learning methods. We use a machine learning approach to model user experience using real-time data produced by the autonomic nervous system and involuntary psychophysiological responses. Multiple psychophysiological measures, such as heart rate, electrodermal activity, and respiratory activity, have been used in combination with self-reporting to prepare training sets for machine learning algorithms. The training data was collected from 31 participants during hour-long experiment sessions, where they played multiple video-games. Afterwards, we trained and compared the results of four different machine learning models, out of which the best one produced ∼96% accuracy. The results suggest that psychophysiological measures can indeed be used to assess the enjoyment of digital entertainment consumers. [ABSTRACT FROM AUTHOR]

IoT is much more than a large number of objects or customer devices connected to the Internet. IoT offers organizations many more opportunities than they can imagine. According to this, sooner or later they will probably choose to build their own IoT network. In this article, we review the technologies of IoT LPWAN Sigfox and LoRa. It can be considered the most important at present due to its ability to make the smart city possible. We also propose the development, deployment and implementation of a mixed IoT architecture LoRa-Sigfox composed of components based on open hardware and software. The architecture is evaluated in a real environment focused on remote monitoring of water meter devices. [ABSTRACT FROM AUTHOR]

The study presents some results of customer paths' analysis in a shopping mall. Bluetooth-based technology is used to collect data. The event log containing spatiotemporal information is analyzed with process mining. Process mining is a technique that enables one to see the whole process contrary to data-centric methods. The use of process mining can provide a readily-understandable view of the customer paths. We installed iBeacon devices, a Bluetooth-based positioning system, in the shopping mall. During December 2017 and January and February 2018, close to 8000 customer data were captured. We aim to investigate customer behaviors regarding gender by using their paths. We can determine the gender of customers if they go to the men's bathroom or women's bathroom. Since the study has a comprehensive scope, we focused on male and female customers' behaviors. This study shows that male and female customers have different behaviors. Their duration and paths, in general, are not similar. In addition, the study shows that the process mining technique is a viable way to analyze customer behavior using Bluetooth-based technology. [ABSTRACT FROM AUTHOR]