Search

The intelligent reflecting surface (IRS) is a two-dimensional (2D) surface with a programmable structure and is composed of many arrays. The arrays are used to supervise electromagnetic wave propagation by altering the electric and magnetic properties of the 2D surface. IRS can influentially convert wireless channels to very effectively enhance spectral efficiency (SE) and communication performance in wireless systems. However, proper channel information is necessary to realize the IRS anticipated gains. The conventional technique has been taken into consideration in recent attempts to fix this issue, which is straightforward but not ideal. A deep learning model which is called the long short-term memory (Bi-LSTM) model can tackle this issue due to its good learning capability and it plays a vital role in enhancing SE. Bi-LSTM can collect data from both forward and backward directions simultaneously to provide improved prediction accuracy. Because of the tremendous benefits of the Bi-LSTM model, in this paper, an IRS-assisted Bi-LSTM model-based multi-user multiple input single output downlink system is proposed for SE improvement. A Wiener filter is used to determine the optimal phase of each IRS element. In the simulation results, the proposed system is compared with other DL models and methods for the SE performance evaluation. The model exhibits satisfactory SE performance with a different signal-to-noise ratio compared to other schemes in the online phase. [ABSTRACT FROM AUTHOR]

Reconfigurable intelligent surface (RIS) has emerged as a promising technology to enhance the spectral efficiency of wireless communication systems. However, if there are many obstacles between the RIS and users, a single RIS may not provide sufficient performance. For this reason, a double RIS-aided communication system is proposed in this paper. However, this system also has a problem: the signal is attenuated three times due to the three channels created by the double RIS. To overcome these attenuations, an active RIS is proposed in this paper. An active RIS is almost the same as a conventional RIS, except for the included amplifier. Comprehensively, the proposed system overcomes various obstacles and attenuations. In this paper, an active RIS is applied to the second RIS. To reduce the power consumption of active elements, a partially active RIS is applied. To optimize the RIS elements, the sum of the covariance matrix is found by using channels related to each RIS, and the right singular vector is exploited using singular value decomposition for the sum of the covariance matrix. Then, the singular value of the sum of the covariance value is checked to determine which element is the active element. Simulation results show that the proposed system has better sum rate performance compared to a single RIS system. Although it has a lower sum rate performance compared to a double RIS with fully active elements, the proposed system will be more attractive in the future because it has much better energy efficiency. [ABSTRACT FROM AUTHOR]

The reconfigurable intelligent surface (RIS) and rate-splitting multiple access (RSMA) are considered as promising technologies for the beyond Fifth-Generation (B5G) and Sixth-Generation (6G) wireless systems by controlling the propagation environment, which attenuates the transmitted signal, and by managing the interference by splitting the user message into common and private messages. Because conventional RIS elements have each impedance connected to the ground, the sum-rate performance improvement of the RIS is limited. Therefore, the new RISs, which have impedance elements connected to each other, have been proposed recently. To be more adaptive to each channel, the optimization of the grouping of the RIS elements is required. Furthermore, since the solution of the optimal rate-splitting (RS) power-splitting ratio is complex, the value should be simply optimized to be more practical in the wireless system. In this paper, the grouping scheme of the RIS elements according to the user scheduling and the solution of the RS power-splitting ratio based on fractional programming (FP) are proposed. The simulation results showed that the proposed RIS-assisted RSMA system achieved a high sum-rate performance compared to the conventional RIS-assisted spatial-division multiple access (SDMA) system. Therefore, the proposed scheme can perform adaptively for the channel and has a flexible interference management. Furthermore, it can be a more suitable technique for B5G and 6G. [ABSTRACT FROM AUTHOR]

A reconfigurable intelligent surface (RIS) has potential for enhancing the performance of wireless communication. A RIS includes cheap passive elements, and the reflecting of signals can be controlled to a specific location of users. In addition, machine learning (ML) techniques are efficient in solving complex problems without explicit programming. Data-driven approaches are efficient in predicting the nature of any problem and can provide a desirable solution. In this paper, we propose a temporal convolutional network (TCN)-based model for RIS-based wireless communication. The proposed model consists of four TCN layers, one fully connected layer, one ReLU layer, and lastly a classification layer. In the input, we provide data in the form of complex numbers to map a specified label under QPSK and BPSK modulation. We consider 2 × 2 and 4 × 4 MIMO communication using one base station and two single-antenna users. We have considered three types of optimizers to evaluate the TCN model. For benchmarking, long short-term memory (LSTM) and without ML are compared. The simulation results are conducted in terms of the bit error rate and symbol error rate which show the effectiveness of the proposed TCN model. [ABSTRACT FROM AUTHOR]

Visible light communication (VLC) has contributed new unused spectrum in addition to the traditional radio frequency communication and can play a significant role in wireless communication. The adaptation of VLC technology enhances wireless connectivity both in indoor and outdoor environments. Multiple-input multiple-output (MIMO) communication has been an efficient technique for increasing wireless communications system capacity and performance. With the advantages of MIMO techniques, VLC can achieve an additional degree of freedom. In this paper, we systematically perform a survey of the existing work based on MIMO VLC. We categorize the types of different MIMO techniques, and a brief description is given. Different problem-solving approaches are given in the subsequent sections. In addition, machine learning approaches are also discussed in sufficient detail. Finally, we identify the future study direction for MIMO-based communication in VLC. [ABSTRACT FROM AUTHOR]

Non-orthogonal multiple access (NOMA) has great potential to implement the fifth-generation (5G) requirements of wireless communication. For a NOMA traditional detection method, successive interference cancellation (SIC) plays a vital role at the receiver side for both uplink and downlink transmission. Due to the complex multipath channel environment and prorogation of error problems, the traditional SIC method has a limited performance. To overcome the limitation of traditional detection methods, the deep-learning method has an advantage for the highly efficient tool. In this paper, a deep neural network which has bi-directional long short-term memory (Bi-LSTM) for multiuser uplink channel estimation (CE) and signal detection of the originally transmitted signal is proposed. Unlike the traditional CE schemes, the proposed Bi-LSTM model can directly recover multiuser transmission signals suffering from channel distortion. In the offline training stage, the Bi-LTSM model is trained using simulation data based on channel statistics. Then, the trained model is used to recover the transmitted symbols in the online deployment stage. In the simulation results, the performance of the proposed model is compared with the convolutional neural network model and traditional CE schemes such as MMSE and LS. It is shown that the proposed method provides feasible improvements in performance in terms of symbol-error rate and signal-to-noise ratio, making it suitable for 5G wireless communication and beyond. [ABSTRACT FROM AUTHOR]

The intelligent reflecting surface (IRS) is a novel and innovative communication technology that aims at the control of the wireless environment. The IRS is considered as a promising technology for sixth-generation wireless communication. In the last few years, machine learning has emerged as a powerful tool for solving complex problems in diverse application areas. In this paper, we propose a convolutional neural network (CNN)-based demodulation technique called Demod-CNN in IRS-based wireless communication for multiple users. A multiple-input multiple-output based orthogonal multiple frequency division multiplexing system is considered for channel modeling. The received signal data are used for training and testing the model. The simulation results show that the proposed model performs better than the conventional demodulation technique. [ABSTRACT FROM AUTHOR]

An intelligent reflecting surface (IRS) is a programmable device that can be used to control electromagnetic waves propagation by changing the electric and magnetic properties of its surface. Therefore, IRS is considered a smart technology for the sixth generation (6G) of communication networks. In addition, machine learning (ML) techniques are now widely adopted in wireless communication as the computation power of devices has increased. As it is an emerging topic, we provide a comprehensive overview of the state-of-the-art on ML, especially on deep learning (DL)-based IRS-enhanced communication. We focus on their operating principles, channel estimation (CE), and the applications of machine learning to IRS-enhanced wireless networks. In addition, we systematically survey existing designs for IRS-enhanced wireless networks. Furthermore, we identify major issues and research opportunities associated with the integration of IRS and other emerging technologies for applications to next-generation wireless communication. [ABSTRACT FROM AUTHOR]