Search

As cyber-attacks increase in unencrypted communication environments such as the traditional Internet, protected communication channels based on cryptographic protocols, such as transport layer security (TLS), have been introduced to the Internet. Accordingly, attackers have been carrying out cyber-attacks by hiding themselves in protected communication channels. However, the nature of channels protected by cryptographic protocols makes it difficult to distinguish between normal and malicious network traffic behaviors. This means that traditional anomaly detection models with features from packets extracted a deep packet inspection (DPI) have been neutralized. Recently, studies on anomaly detection using artificial intelligence (AI) and statistical characteristics of traffic have been proposed as an alternative. In this review, we provide a systematic review for AI-based anomaly detection techniques over encrypted traffic. We set several research questions on the review topic and collected research according to eligibility criteria. Through the screening process and quality assessment, 30 research articles were selected with high suitability to be included in the review from the collected literature. We reviewed the selected research in terms of dataset, feature extraction, feature selection, preprocessing, anomaly detection algorithm, and performance indicators. As a result of the literature review, it was confirmed that various techniques used for AI-based anomaly detection over encrypted traffic were used. Some techniques are similar to those used for AI-based anomaly detection over unencrypted traffic, but some technologies are different from those used for unencrypted traffic. [ABSTRACT FROM AUTHOR]

CuO nanosheets, Cr-doped CuO nanosheets, and Cr-doped CuO nanorods were prepared by heating a slurry containing Cu-hydroxide/Cr-hydroxide. Their responses to 100 ppm NO2, C2H5OH, NH3, trimethylamine, C3H8, and CO were measured. For 2.2 at% Cr-doped CuO nanorods, the response (Ra/Rg, Ra: resistance in air, Rg: resistance in gas) to 100 ppm NO2 was 134.2 at 250 °C, which was significantly higher than that of pure CuO nano-sheets (Ra/Rg = 7.5) and 0.76 at% Cr-doped CuO nanosheets (Ra/Rg = 19.9). In addition, the sensitivity for NO2 was also markedly enhanced by Cr doping. Highly sensitive and selective detection of NO2 in 2.2 at% Cr-doped CuO nanorods is explained in relation to Cr-doping induced changes in donor density, morphology, and catalytic effects. [ABSTRACT FROM AUTHOR]

Various ZnO nanostructures such as porous nanorods and two hierarchical structures consisting of porous nanosheets or crystalline nanorods were prepared by the reaction of mixtures of oleic-acid-dissolved ethanol solutions and aqueous dissolved Znprecursor solutions in the presence of NaOH. All three ZnO nanostructures showed sensitive and selective detection of C2H5OH. In particular, ultra-high responses (Ra/Rg = ∼1,200, Ra: resistance in air, Rg: resistance in gas) to 100 ppm C2H5OH was attained using porous nanorods and hierarchical structures assembled from porous nanosheets, which is one of the highest values reported in the literature. The gas response and linearity of gas sensors were discussed in relation to the size, surface area, and porosity of the nanostructures. [ABSTRACT FROM AUTHOR]

With growing interest in healthcare, wearable healthcare devices have been developed and researched. In particular, near-field communication (NFC) based wearable devices have been actively studied for device miniaturization. Herein, this article proposes a low-cost and convenient healthcare system, which can monitor heart rate and temperature using a wireless/battery-free sensor and the customized smartphone application. The authors designed and fabricated a customized healthcare device based on the NFC system, and developed a smartphone application for real-time data acquisition and processing. In order to achieve compact size without performance degradation, a dual-layered layout is applied to the device. The authors demonstrate that the device can operate as attached on various body sites such as wrist, fingertip, temple, and neck due to outstanding flexibility of device and adhesive strength between the device and the skin. In addition, the data processing flow and processing result are presented for offering heart rate and skin temperature. Therefore, this work provides an affordable and practical pathway for the popularization of wireless wearable healthcare system. Moreover, the proposed platform can easily delivery the measured health information to experts for contactless/personal health consultation. [ABSTRACT FROM AUTHOR]

To have an objective depression diagnosis, numerous studies based on machine learning and deep learning using electroencephalogram (EEG) have been conducted. Most studies depend on one-dimensional raw data and required fine feature extraction. To solve this problem, in the EEG visualization research field, short-time Fourier transform (STFT), wavelet, and coherence commonly used as method s for transferring EEG data to 2D images. However, we devised a new way from the concept that EEG's asymmetry was considered one of the major biomarkers of depression. This study proposes a deep-asymmetry methodology that converts the EEG's asymmetry feature into a matrix image and uses it as input to a convolutional neural network. The asymmetry matrix image in the alpha band achieved 98.85% accuracy and outperformed most of the methods presented in previous studies. This study indicates that the proposed method can be an effective tool for pre-screening major depressive disorder patients. [ABSTRACT FROM AUTHOR]

To realize efficient operation of a silo, level management of internal storage is crucial. In this study, to address the existing measurement limitations, a silo hotspot detector, which is typically utilized for internal silo temperature monitoring, was employed. The internal temperature data measured using the hotspot detectors were used to train an artificial neural network (ANN) algorithm to predict the level of the internal storage of the silo. The prediction accuracy was evaluated by comparing the predicted data with ground truth data. We combined the ANN model with the genetic algorithm (GA) to improve the prediction accuracy and establish efficient sensor installation positions and number to proceed with optimization. Simulation results demonstrated that the best predictive performance (up to 97% accuracy) was achieved when the ANN structure was 9-19-19-1. Furthermore, the numbers of efficient sensors and sensors positions determined using the proposed ANN-GA technique were reduced from seven to five or four, thereby ensuring economic feasibility. [ABSTRACT FROM AUTHOR]

An electrochemical immunosensor employs antibodies as capture and detection means to produce electrical charges for the quantitative analysis of target molecules. This sensor type can be utilized as a miniaturized device for the detection of point-of-care testing (POCT). Achieving high-performance analysis regarding sensitivity has been one of the key issues with developing this type of biosensor system. Many modern nanotechnology efforts allowed for the development of innovative electrochemical biosensors with high sensitivity by employing various nanomaterials that facilitate the electron transfer and carrying capacity of signal tracers in combination with surface modification and bioconjugation techniques. In this review, we introduce novel nanomaterials (e.g., carbon nanotube, graphene, indium tin oxide, nanowire and metallic nanoparticles) in order to construct a high-performance electrode. Also, we describe how to increase the number of signal tracers by employing nanomaterials as carriers and making the polymeric enzyme complex associated with redox cycling for signal amplification. The pros and cons of each method are considered throughout this review. We expect that these reviewed strategies for signal enhancement will be applied to the next versions of lateral-flow paper chromatography and microfluidic immunosensor, which are considered the most practical POCT biosensor platforms. [ABSTRACT FROM AUTHOR]

Wireless Sensor Networks (WSNs) can be implemented as one of sensor systems in Network Centric Warfare (NCW). Mobility support and energy efficiency are key concerns for this application, due to multiple mobile users and stimuli in real combat field. However, mobility support approaches that can be adopted in this circumstance are rare. This paper proposes Multiple Mobility Support Approach (MMSA) based on Probing Environment and Adaptive Sleeping (PEAS) to support the simultaneous mobility of both multiple users and stimuli by sharing the information of stimuli in WSNs. Simulations using Qualnet are conducted, showing that MMSA can support multiple mobile users and stimuli with good energy efficiency. It is expected that the proposed MMSA can be applied to real combat field. [ABSTRACT FROM AUTHOR]