Search

Ultrasonic guided waves (UGWs) in water-filled pipes are subject to more severe dispersion and attenuation than vacant pipes, posing significant challenges for defect identification and localization. To this end, a novel sparse signal decomposition method called orthogonal matching pursuit based on dispersion and multi-mode (DMOMP) was proposed, which utilizes the second-order asymptotic solution of dispersion curves and the conversion characteristics of asymmetric UGWs in the defect contact stage to reconstruct the dispersive signals and converts the time-domain dispersive signals to distance-domain non-dispersive signals by dispersion compensated time-distance mapping. The synthesized simulation results indicate that DMOMP not only exhibits higher reconstruction accuracy compared to OMP, but also reveals more accurate and stable mode recognition and localization compared to DOMP, which only considers the dispersion under perturbation and noise. In addition, the UGW testing experimental results of water-filled pipes verify the effectiveness of DMOMP, the localization accuracies of three feature signals (defct 1, defct 2 and end echo) with DMOMP are 99.10%, 98.72% and 98.36%, respectively, and the average localization accuracy of DMOMP is as high as 98.73%. [ABSTRACT FROM AUTHOR]

A stripline-fed tightly coupled array antenna with compact size, large scan volume and low cross-polarization characteristics is proposed for ultrawideband (UWB) applications. Simple impedance-matching process is realized by using parallel dual dipoles. Meanwhile, the parallel symmetrical radiating structures minimize the cross-polarization field components dramatically. The mitigation of various undesired resonances is studied in detail. An infinite array is designed to achieve 3:1 bandwidth (6−18 GHz) when scanning ±60 ∘ in the E-/D-planes (VSWR < 2.5) and H-plane (VSWR < 3.5). The cross-polarization levels remain below −29 dB at broadside. A 16 × 16 prototype is fabricated to demonstrate the design. The measured results are consistent well with the simulated ones. The overall size of the prototype at the lowest operating frequency is 3 × 3 × 0.4 λ 0 3 ( 15 × 15 × 2 cm 3 ). Due to its wide bandwidth, good electronic scan performance and compact size, the proposed antenna array is a good candidate for modern wireless platforms. [ABSTRACT FROM AUTHOR]