Search

The power system, as a core component of a launch vehicle, has a crucial impact on the reliability and safety of a rocket launch. Due to the limited measurement information inside the engine, it is often challenging to realize fast and accurate anomaly detection. For this reason, this paper introduces the rocket flight state data to expand the information source for anomaly detection. However, engine measurement and rocket flight state information have different data distribution characteristics. To find the optimal data fusion scheme for anomaly detection, a data set information fusion algorithm based on convex optimization is proposed, which solves the optimal fusion parameter using the convex quadratic programming problem and then adopts the adaptive CUSUM algorithm to realize the fast and accurate anomaly detection of engine faults. Numerical simulation tests show that the algorithm proposed in this paper has a higher detection accuracy and lower detection time than the traditional algorithm. [ABSTRACT FROM AUTHOR]

The ball screw is the core component of the CNC machine tool feed system, and its health plays an important role in the feed system and even in the entire CNC machine tool. This paper studies the fault diagnosis and health assessment of ball screws. Aiming at the problem that the ball screw signal is weak and susceptible to interference, using a wavelet convolution structure to improve the network can improve the mining ability of signal time domain and frequency domain features; aiming at the challenge of ball screw sensor installation position limitation, a transfer learning method is proposed, which adopts the domain adaptation method as jointly distributed adaptation (JDA), and realizes the transfer diagnosis across measurement positions by extracting the diagnosis knowledge of different positions of the ball screw. In this paper, the adaptive batch normalization algorithm (AdaBN) is introduced to enhance the proposed model so as to improve the accuracy of migration diagnosis. Experiments were carried out using a self-made lead screw fatigue test bench. Through experimental verification, the method proposed in this paper can extract effective fault diagnosis knowledge. By collecting data under different working conditions at the bearing seat of the ball screw, the fault diagnosis knowledge is extracted and used to identify and diagnose the position fault of the nut seat. In this paper, some background noise is added to the collected data to test the robustness of the proposed network model. [ABSTRACT FROM AUTHOR]

Fault diagnosis is one of the important applications of edge computing in the Industrial Internet of Things (IIoT). To address the issue that traditional fault diagnosis methods often struggle to effectively extract fault features, this paper proposes a novel rolling bearing fault diagnosis method that integrates Gramian Angular Field (GAF), Convolutional Neural Network (CNN), and Vision Transformer (ViT). First, GAF is used to convert one-dimensional vibration signals from sensors into two-dimensional images, effectively retaining the fault features of the vibration signal. Then, the CNN branch is used to extract the local features of the image, which are combined with the global features extracted by the ViT branch to diagnose the bearing fault. The effectiveness of this method is validated with two datasets. Experimental results show that the proposed method achieves average accuracies of 99.79% and 99.63% on the CWRU and XJTU-SY rolling bearing fault datasets, respectively. Compared with several widely used fault diagnosis methods, the proposed method achieves higher accuracy for different fault classifications, providing reliable technical support for performing complex fault diagnosis on edge devices. [ABSTRACT FROM AUTHOR]

Intelligent fault diagnostics based on deep learning provides a favorable guarantee for the reliable operation of equipment, but a trained deep learning model generally has low prediction accuracy in cross-domain diagnostics. To solve this problem, a deep learning fault diagnosis method based on the reconstructed envelope spectrum is proposed to improve the ability of rolling bearing cross-domain fault diagnostics in this paper. First, based on the envelope spectrum morphology of rolling bearing failures, a standard envelope spectrum is constructed that reveals the unique characteristics of different bearing health states and eliminates the differences between domains due to different bearing speeds and bearing models. Then, a fault diagnosis model was constructed using a convolutional neural network to learn features and complete fault classification. Finally, using two publicly available bearing data sets and one bearing data set obtained by self-experimentation, the proposed method is applied to the data of the fault diagnostics of rolling bearings under different rotational speeds and different bearing types. The experimental results show that, compared with some popular feature extraction methods, the proposed method can achieve high diagnostic accuracy with data at different rotational speeds and different bearing types, and it is an effective method for solving the problem with cross-domain fault diagnostics for rolling bearings. [ABSTRACT FROM AUTHOR]

With the continuous operation of analog circuits, the component degradation problem gradually comes to the forefront, which may lead to problems, such as circuit performance degradation, system stability reductions, and signal quality degradation, which could be particularly evident in increasingly complex electronic systems. At the same time, due to factors, such as continuous signal transformation, the fluctuation of component parameters, and the nonlinear characteristics of components, traditional fault localization methods are still facing significant challenges when dealing with large-scale complex circuit faults. Based on this, this paper proposes a fault-diagnosis method for analog circuits using the ECWGEO algorithm, an enhanced version of the GEO algorithm, to de-optimize the 1D-CNN with an attention mechanism to handle time–frequency fusion inputs. Firstly, a typical circuit-quad op-amp dual second-order filter circuit is selected to construct a fault-simulation model, and Monte Carlo analysis is used to obtain a large number of samples as the dataset of this study. Secondly, the 1D-CNN network structure is improved for the characteristics of the analog circuits themselves, and the time–frequency domain fusion input is implemented before inputting it into the network, while the attention mechanism is introduced into the network. Thirdly, instead of relying on traditional experience for network structure determination, this paper adopts a parameter-optimization algorithm for network structure optimization and improves the GEO algorithm according to the problem characteristics, which enhances the diversity of populations in the late stage of its search and accelerates the convergence speed. Finally, experiments are designed to compare the results in different dimensions, and the final proposed structure achieved a 98.93% classification accuracy, which is better than other methods. [ABSTRACT FROM AUTHOR]

Rotating machinery condition monitoring and fault diagnosis are important bases for maintenance decisions, as the vibrations generated during operation are usually imperceptible to the naked eye. Eulerian video motion magnification (EVMM) can reveal subtle changes and has been widely used in various fields such as medicine, structural analysis, and fault diagnosis, etc. However, the method has a bound relationship among three parameters: spatial wavelength, amplification factor, and displacement function, so it is necessary to adjust the parameters manually in practical applications. In this paper, on the basis of the original method, an automatic solution of spatial cutoff wavelength based on brightness is proposed. First, an input video is decomposed into image sequences, their RGB color spaces are transformed into HSV color spaces, and the Value channel image representing brightness is selected to automatically calculate the spatial cutoff frequency, and then the spatial cutoff wavelength is determined, and the motion magnification video in the specified frequency band is obtained by substituting it into the original method. Then, a publicly available video is taken as an example for simulation analysis. By comparing the time-brightness curves of the three videos (original video, motion magnification video obtained by the original method and the improved method), it is apparent that the proposed method exhibits the most significant brightness variation. Finally, taking an overhung rotor-bearing test device as the object, five conditions are set, respectively: normal, rotor unbalance, loosened anchor bolt of the bearing seat, compound fault, rotor misalignment. The proposed method is adopted to magnify the motion of the characteristic frequency bands including 1X frequency and 2X frequency. The results show that no obvious displacement is found in normal working conditions, and that the rotor unbalance fault has an overall axial shaking, the bearing seat at the loose place has an obvious vertical displacement, while the compound fault combines the both fault characteristics, and the rotor misalignment fault has an obvious axial displacement of the free-end bearing seat. The method proposed in this paper can automatically obtain the space cutoff wavelength, which solves the problem of defects arising from manually adjusting the parameters in the original method, and provides a new method for rotating machinery fault diagnosis and other fields of application. [ABSTRACT FROM AUTHOR]

In tunnel boring projects, wear and tear in the tooling system can have significant consequences, such as decreased boring efficiency, heightened maintenance costs, and potential safety hazards. In this paper, a fault diagnosis method for TBM tooling systems based on SAV−SVDD failure location (SSFL) is proposed. The aim of this method is to detect faults caused by disk cutter wear during the boring process, which diminishes the boring efficiency and is challenging to detect during construction. This paper uses SolidWorks to create a complete three−dimensional model of the TBM hydraulic thrust system and tool system. Then, dynamic simulations are performed with Adams. This helps us understand how the load on the propulsion hydraulic cylinder changes as the TBM tunneling tool wears to different degrees during construction. The hydraulic propulsion system was modeled and simulated using AMESIM software. Utilizing the load on the hydraulic propulsion cylinder as an input signal, pressure signals from the two chambers of the hydraulic cylinder and the system's flow signal were acquired. This enabled an in−depth exploration of the correlation between these acquired signals and the extent of the tooling system failure. Following this analysis, a collection of normal sample data and sample data representing different degrees of disk cutter abrasions was amassed for further study. Next, an SSFL network model for locating the failure area of the cutter was established. Fault sample data were used as the input, and the accuracy of the fault diagnosis model was tested. The test results show that the performance of the SSFL network model is better than that of the SAE−SVM and SVDD network models. The SSFL model achieves 90% accuracy in determining the failure area of the cutter head. The model effectively identifies the failure regions, enabling timely tool replacement to avoid decreased boring efficiency under wear conditions. The experimental findings validate the feasibility of this approach. [ABSTRACT FROM AUTHOR]

As the operational status of aircraft engines evolves, their fault modes also undergo changes. In response to the operational degradation trend of aircraft engines, this paper proposes an aircraft engine fault diagnosis model based on 1DCNN-BiLSTM with CBAM. The model can be directly applied to raw monitoring data without the need for additional algorithms to extract fault degradation features. It fully leverages the advantages of 1DCNN in extracting local features along the spatial dimension and incorporates CBAM, a channel and spatial attention mechanism. CBAM could assign higher weights to features relevant to fault categories and make the model pay more attention to them. Subsequently, it utilizes BiLSTM to handle nonlinear time feature sequences and bidirectional contextual feature information. Finally, experimental validation is conducted on the publicly available CMAPSS dataset from NASA, categorizing fault modes into three types: faultless, HPC fault (the single fault), and HPC&Fan fault (the mixed fault). Comparative analysis with other models reveals that the proposed model has a higher classification accuracy, which is of practical significance in improving the reliability of aircraft engine operations and for Remaining Useful Life (RUL) prediction. [ABSTRACT FROM AUTHOR]

The traction system is very important to ensure the safe operation of high-speed trains, and the failure of the traction transformer is the most likely fault in the traction system. Fault diagnosis in actual work relies largely on manual experience. This paper proposes an improved RAkEL (Random k-Labelsets) algorithm for the fault diagnosis of high-speed train traction transformers. Firstly, this article starts from the large amount of "sleeping" fault maintenance data accumulated by the railway department, takes a single maintenance record as an instance, uses specific monitoring values to construct an instance vector, and uses the fault phenomena corresponding to the monitoring indicators as labels. Then, this paper improves the step of selecting k-labelsets in RAkEL, and extracts associated faults using the Relief algorithm. Finally, this paper excavates and uses the association rules between data and faults to identify traction transformer faults. The results showed that the improved RAkEL diagnostic method had a significant improvement in the evaluation indicators. Compared with other multi-label classification algorithms, including BR (Binary Relevance) and CLR (Calibrated Label Ranking), this method performs well on multiple evaluation indicators. It can further help engineers perform timely maintenance work in the future. [ABSTRACT FROM AUTHOR]

Accurate damage location diagnosis of frame structures is of great significance to the judgment of damage degree and subsequent maintenance of frame structures. However, the similarity characteristics of vibration data at different damage locations and noise interference bring great challenges. In order to overcome the above problems and realize accurate damage location diagnosis of the frame structure, the existing convolutional neural network with training interference (TICNN) is improved in this paper, and a high-precision neural network model named convolutional neural network based on Inception (BICNN) for fault diagnosis with strong anti-noise ability is proposed by adding the Inception module to TICNN. In order to effectively avoid the overall misjudgment problem caused by using single sensor data for damage location diagnosis, an integrated damage location diagnosis method is proposed. Taking the four-story steel frame model of the University of British Columbia as the research object, the method proposed in this paper is tested and compared with other methods. The experimental results show that the diagnosis accuracy of the proposed method is 97.38%, which is higher than other methods; at the same time, it has greater advantages in noise resistance. Therefore, the method proposed in this paper not only has high accuracy, but also has strong anti-noise ability, which can solve the problem of accurate damage location diagnosis of complex frame structures under a strong noise environment. [ABSTRACT FROM AUTHOR]

This paper presents bearing fault diagnosis using the image classification of different fault patterns. Feature extraction for image classification is carried out using a novel approach of Color recurrence plots, which is presented for the first time. Color recurrence plots are created using non-linear embedding of the vibration signals into delay coordinate space with variable time lags. Deep learning-based image classification is then performed by building the database of the extracted features of the bearing vibration signals in the form of Color recurrence plots. A Series of computational experiments are performed to compare the accuracy of bearing fault classification using Color recurrence plots. The standard bearing vibration dataset of Case Western Reserve University is used for those purposes. The paper demonstrates the efficacy and the accuracy of a new and unique approach of scalar time series extraction into two-dimensional Color recurrence plots for bearing fault diagnosis. [ABSTRACT FROM AUTHOR]

The rapid development of cities in recent years has increased the operational pressure of rail vehicles, and due to the characteristics of rail vehicles, including harsh operating environment, frequent starting and braking, resulting in rails and wheels being prone to rail corrugation, polygons, flat scars and other faults. These faults are coupled in actual operation, leading to the deterioration of the wheel–rail contact relationship and causing harm to driving safety. Hence, the accurate detection of wheel–rail coupled faults will improve the safety of rail vehicles' operation. The dynamic modeling of rail vehicles is carried out to establish the character models of wheel–rail faults including rail corrugation, polygonization and flat scars to explore the coupling relationship and characteristics under variable speed conditions and to obtain the vertical acceleration of the axle box. An APDM time–frequency analysis method is proposed in this paper based on the PDMF adopting Rényi entropy as the evaluation index and employing a WOA to optimize the parameter set. The number of iterations of the WOA adopted in this paper is decreased by 26% and 23%, respectively, compared with PSO and SSA, which means that the WOA performs at faster convergence speed and with a more accurate Rényi entropy value. Additionally, TFR obtained using APDM realizes the localization and extraction of the coupled fault characteristics under rail vehicles' variable speed working conditions with higher energy concentration and stronger noise resistance corresponding to prominent ability of fault diagnosis. Finally, the effectiveness of the proposed method is verified using simulation and experimental results that prove the engineering application value of the proposed method. [ABSTRACT FROM AUTHOR]

Traditional methods of gearbox fault diagnosis rely heavily on manual experience. To address this problem, our study proposes a gearbox fault diagnosis method based on multidomain information fusion. An experimental platform consisting of a JZQ250 fixed-axis gearbox was built. An acceleration sensor was used to obtain the vibration signal of the gearbox. Singular value decomposition (SVD) was used to preprocess the signal in order to reduce noise, and the processed vibration signal was subjected to short-time Fourier transform to obtain a two-dimensional time–frequency map. A multidomain information fusion convolutional neural network (CNN) model was constructed. Channel 1 was a one-dimensional convolutional neural network (1DCNN) model that input a one-dimensional vibration signal, and channel 2 was a two-dimensional convolutional neural network (2DCNN) model that input short-time Fourier transform (STFT) time–frequency images. The feature vectors extracted using the two channels were then fused into feature vectors for input into the classification model. Finally, support vector machines (SVM) were used to identify and classify the fault types. The model training performance used multiple methods: training set, verification set, loss curve, accuracy curve and t-SNE visualization (t-SNE). Through experimental verification, the method proposed in this paper was compared with FFT-2DCNN, 1DCNN-SVM and 2DCNN-SVM in terms of gearbox fault recognition performance. The model proposed in this paper had the highest fault recognition accuracy (98.08%). [ABSTRACT FROM AUTHOR]

The inability to locate device faults quickly and accurately has become prominent due to the large number of communication devices and the complex structure of secondary circuit networks in smart substations. Traditional methods are less efficient when diagnosing secondary equipment faults in smart substations, and deep learning methods have poor portability, high learning sample costs, and often require retraining a model. Therefore, a secondary equipment fault diagnosis method based on a graph attention network is proposed in this paper. All fault events are automatically represented as graph-structured data based on the K-nearest neighbors (KNNs) algorithm in terms of the feature information exhibited by the corresponding detection nodes when equipment faults occur. Then, a fault diagnosis model is established based on the graph attention network. Finally, partial intervals of a 220 kV intelligent substation are taken as an example to compare the fault localization effect of different methods. The results show that the method proposed in this paper has the advantages of higher localization accuracy, lower learning cost, and better robustness than the traditional machine learning and deep learning methods. [ABSTRACT FROM AUTHOR]

The method of acoustic radiation signal detection not only enables contactless measurement but also provides comprehensive state information during equipment operation. This paper proposes an enhanced feature extraction network (EFEN) for fault diagnosis of rolling bearings based on acoustic signal feature learning. The EFEN network comprises four main components: the data preprocessing module, the information feature selection module (IFSM), the channel attention mechanism module (CAMM), and the convolutional neural network module (CNNM). Firstly, the one-dimensional acoustic signal is transformed into a two-dimensional grayscale image. Then, IFSM utilizes three different-sized convolution filters to process input image data and fuse and assign weights to feature information that can attenuate noise while highlighting effective fault information. Next, a channel attention mechanism module is introduced to assign weights to each channel. Finally, the convolutional neural network (CNN) fault diagnosis module is employed for accurate classification of rolling bearing faults. Experimental results demonstrate that the EFEN network achieves high accuracy in fault diagnosis and effectively detects rolling bearing faults based on acoustic signals. The proposed method achieves an accuracy of 98.52%, surpassing other methods in terms of performance. In comparative analysis of antinoise experiments, the average accuracy remains remarkably high at 96.62%, accompanied by a significantly reduced average iteration time of only 0.25 s. Furthermore, comparative analysis confirms that the proposed algorithm exhibits excellent accuracy and resistance against noise. [ABSTRACT FROM AUTHOR]

The application of edge computing combined with the Internet of Things (edge-IoT) has been rapidly developed. It is of great significance to develop a lightweight network for gearbox compound fault diagnosis in the edge-IoT context. The goal of this paper is to devise a novel and high-accuracy lightweight neural network based on Legendre multiwavelet transform and multi-channel convolutional neural network (LMWT-MCNN) to fast recognize various compound fault categories of gearbox. The contributions of this paper mainly lie in three aspects: The feature images are designed based on the LMWT frequency domain and they are easily implemented in the MCNN model to effectively avoid noise interference. The proposed lightweight model only consists of three convolutional layers and three pooling layers to further extract the most valuable fault features without any artificial feature extraction. In a fully connected layer, the specific fault type of rotating machinery is identified by the multi-label method. This paper provides a promising technique for rotating machinery fault diagnosis in real applications based on edge-IoT, which can largely reduce labor costs. Finally, the PHM 2009 gearbox and Paderborn University bearing compound fault datasets are used to verify the effectiveness and robustness of the proposed method. The experimental results demonstrate that the proposed lightweight network is able to reliably identify the compound fault categories with the highest accuracy under the strong noise environment compared with the existing methods. [ABSTRACT FROM AUTHOR]

With the development of industrial manufacturing intelligence, the role of rotating machinery in industrial production and life is more and more important. Aiming at the problems of the complex and changeable working environment of rolling bearings and limited computing ability, fault feature information cannot be effectively extracted, and the current deep learning model is difficult to be compatible with lightweight and high efficiency. Therefore, this paper proposes a fault detection method for power equipment based on an energy spectrum diagram and deep learning. Firstly, a novel two-dimensional time-frequency feature representation method and energy spectrum feature map based on wavelet packet transform is proposed, and an energy spectrum feature map dataset is made for subsequent diagnosis. This method can realize multi-resolution analysis, fully extract the feature information contained in the fault signal, and accelerate the convergence of the subsequent diagnosis model. Secondly, a lightweight residual dense convolutional neural network model (LR-DenseNet) is proposed. This model combines the advantages of residual learning and a dense connection, and can not only extract deep features more easily, but can also effectively use shallow features. Then, based on the lightweight residual dense convolutional neural network model, an LR-DenseSENet model is proposed. By introducing the transfer learning strategy and adding the channel domain, an attention mechanism is added to the channel feature fusion layer, with the accuracy of detection up to 99.4%, and the amount of parameter calculation greatly reduced to one-fifth of that of VGG. Finally, through an experimental analysis, it is verified that the fault detection model designed in this paper based on the combination of an energy spectrum feature map and LR-DenseSENet achieves a satisfactory detection effect. [ABSTRACT FROM AUTHOR]

The switch machine, an essential element of railway infrastructure, is crucial in maintaining the safety of railway operations. Traditional methods for fault diagnosis are constrained by their dependence on extensive labeled datasets. Semi-supervised learning (SSL), although a promising solution to the scarcity of samples, faces challenges such as the imbalance of pseudo-labels and inadequate data representation. In response, this paper presents the Semi-Supervised Adaptive Matrix Machine (SAMM) model, designed for the fault diagnosis of switch machine. SAMM amalgamates semi-supervised learning with adaptive technologies, leveraging adaptive low-rank regularizer to discern the fundamental links between the rows and columns of matrix data and applying adaptive penalty items to correct imbalances across sample categories. This model methodically enlarges its labeled dataset using probabilistic outputs and semi-supervised, automatically adjusting parameters to accommodate diverse data distributions and structural nuances. The SAMM model's optimization process employs the alternating direction method of multipliers (ADMM) to identify solutions efficiently. Experimental evidence from a dataset containing current signals from switch machines indicates that SAMM outperforms existing baseline models, demonstrating its exceptional status diagnostic capabilities in situations where labeled samples are scarce. Consequently, SAMM offers an innovative and effective approach to semi-supervised classification tasks involving matrix data. [ABSTRACT FROM AUTHOR]

In the process of metal wire and additive manufacturing, due to changes in temperature, humidity, current, voltage, and other parameters, as well as the failure of machinery and equipment, a failure may occur in the manufacturing process that seriously affects the current situation of production efficiency and product quality. Based on the demand for monitoring of the key impact parameters of additive manufacturing, this paper develops a parameter monitoring and prediction system for the additive manufacturing feeding process to provide a basis for future fault diagnosis. The fault diagnosis and prediction system for metal wire supply and additive manufacturing utilizes STM 32 as its core, enabling the capture and transmission of temperature, humidity, current, and voltage data. The upper computer system, designed on the LabVIEW 2019 virtual instrument platform, incorporates an LSTM neural network model and facilitates a connection between LabVIEW and MATLAB 2019 to achieve the prediction function. The monitoring and prediction system established in this study is intended to provide basic research assistance in the field of fault diagnosis. [ABSTRACT FROM AUTHOR]

Multichannel signals contain an abundance of fault characteristic information on equipment and show greater potential for weak fault characteristics extraction and early fault detection. However, how to effectively utilize the advantages of multichannel signals with their information richness while eliminating interference components caused by strong background noise and information redundancy to achieve accurate extraction of fault characteristics is still challenging for mechanical fault diagnosis based on multichannel signals. To address this issue, an effective weak fault detection framework for multichannel signals is proposed in this paper. Firstly, the advantages of a tensor on characterizing fault information were displayed, and the low-rank property of multichannel fault signals in a tensor domain is revealed through tensor singular value decomposition. Secondly, to tackle weak fault characteristics extraction from multichannel signals under strong background noise, an adaptive threshold function is introduced, and an adaptive low-rank tensor estimation model is constructed. Thirdly, to further improve the accurate estimation of weak fault characteristics from multichannel signals, a new sparsity metric-oriented parameter optimization strategy is provided for the adaptive low-rank tensor estimation model. Finally, an effective multichannel weak fault detection framework is formed for rolling bearings. Multichannel data from the repeatable simulation, the publicly available XJTU-SY whole lifetime datasets and an accelerated fatigue test of rolling bearings are used to validate the effectiveness and practicality of the proposed method. Excellent results are obtained in multichannel weak fault detection with strong background noise, especially for early fault detection. [ABSTRACT FROM AUTHOR]

The increasing deployment of industrial robots in manufacturing requires accurate fault diagnosis. Online monitoring data typically consist of a large volume of unlabeled data and a small quantity of labeled data. Conventional intelligent diagnosis methods heavily rely on supervised learning with abundant labeled data. To address this issue, this paper presents a semi-supervised Informer algorithm for fault diagnosis modeling, leveraging the Informer model's long- and short-term memory capabilities and the benefits of semi-supervised learning to handle the diagnosis of a small amount of labeled data alongside a substantial amount of unlabeled data. An experimental study is conducted using real-world industrial robot monitoring data to assess the proposed algorithm's effectiveness, demonstrating its ability to deliver accurate fault diagnosis despite limited labeled samples. [ABSTRACT FROM AUTHOR]

This paper proposes a fault-tolerant control (FTC) strategy using the current space vectors to diagnose sensor failures and enhance the sustained operation of a field-oriented (FO) controlled induction motor drive (IMD). Three space vectors are established for the sensor fault diagnosis technique, including one converted from the measured currents and the other two calculated from the current estimation technique, respectively, measured and with reference speeds. A mixed mathematical model using three space vectors and their components is proposed to accurately determine the fault condition of each sensor in the motor drive. After determining the operating status of each sensor, if the sensor signal is in good condition, the feedback signal to the controller will be the measured signal; otherwise, the estimated signal will be used instead of the failed signal. Failure states of the various sensors were simulated to check the effectiveness of the proposed technique in the Matlab/Simulink environment. The simulation results are positive: the IMD system applying the proposed FTC technique accurately detected the failed sensor and maintained stability during the operation. [ABSTRACT FROM AUTHOR]

Currently, many fault diagnosis methods for rolling bearings based on deep learning are facing two main challenges. Firstly, the deep learning model exhibits poor diagnostic performance and limited generalization ability in the presence of noise signals and varying loads. Secondly, there is incomplete utilization of fault information and inadequate extraction of fault features, leading to the low diagnostic accuracy of the model. To address these problems, this paper proposes an improved dual-branch convolutional capsule neural network for rolling bearing fault diagnosis. This method converts the collected bearing vibration signals into grayscale images to construct a grayscale image dataset. By fully considering the types of bearing faults and damage diameters, the data are labeled using a dual-label format. A multi-scale convolution module is introduced to extract features from the data and maximize feature information extraction. Additionally, a coordinate attention mechanism is incorporated into this module to better extract useful channel features and enhance feature extraction capability. Based on adaptive fusion between fault type (damage diameter) features and labels, a dual-branch convolutional capsule neural network model for rolling bearing fault diagnosis is established. The model was experimentally validated using both Case Western Reserve University's bearing dataset and self-made datasets. The experimental results demonstrate that the fault type branch of the model achieves an accuracy rate of 99.88%, while the damage diameter branch attains an accuracy rate of 99.72%. Both branches exhibit excellent classification performance and display robustness against noise interference and variable working conditions. In comparison with other algorithm models cited in the reference literature, the diagnostic capability of the model proposed in this study surpasses them. Furthermore, the generalization ability of the model is validated using a self-constructed laboratory dataset, yielding an average accuracy rate of 94.25% for both branches. [ABSTRACT FROM AUTHOR]

To solve the problem of a low signal-to-noise ratio of fault signals and the difficulty in effectively and accurately identifying the fault state in the early stage of motor bearing fault occurrence, this paper proposes an early fault diagnosis method for bearings based on the Differential Local Mean Decomposition (DLMD) and fusion of current–vibration signals. This method uses DLMD to decompose the current signal and vibration signal, respectively, and weights the decomposed product function (PF) according to the kurtosis value to reconstruct the signal, and then fuses the reconstructed signals to obtain the current–vibration fusion signal after normalization, and then analyzes the fusion signal spectrally through the Hilbert envelope spectrum. Finally, the fusion signal is analyzed by the Hilbert envelope spectrum, and a clear fault characteristic frequency is obtained. The experimental results demonstrate that compared to traditional bearing fault diagnosis methods, the proposed method significantly improves the signal-to-noise ratio of fault signals, effectively enhances the sensitivity of early-stage fault detection in motor bearings, and improves the accuracy of fault identification. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) panels are one of the popular green energy resources and PV panel parameter estimations are one of the popular research topics in PV panel technology. The PV panel parameters could be used for PV panel health monitoring and fault diagnosis. Recently, a PV panel parameters estimation method based in neural network and numerical current predictor methods has been developed. However, in order to further improve the estimation accuracies, a new approach of PV panel parameter estimation is proposed in this paper. The output current and voltage dynamic responses of a PV panel are measured, and the time series of the I–V vectors will be used as input to an artificial neural network (ANN)-based PV model parameter range classifier (MPRC). The MPRC is trained using an I–V dataset with large variations in PV model parameters. The results of MPRC are used to preset the initial particles' population for a particle swarm optimization (PSO) algorithm. The PSO algorithm is used to estimate the PV panel parameters and the results could be used for PV panel health monitoring and the derivation of maximum power point tracking (MMPT). Simulations results based on an experimental I–V dataset and an I–V dataset generated by simulation show that the proposed algorithms can achieve up to 3.5% accuracy and the speed of convergence was significantly improved as compared to a purely PSO approach. [ABSTRACT FROM AUTHOR]

Sensor faults are one of the most common faults that cause performance degradation or functional loss in permanent magnet traction drive systems (PMTDSs). To quickly diagnose faulty sensors, this paper proposes a real-time joint diagnosis method for multi-sensor faults based on structural analysis. Firstly, based on limited monitoring signals on board, a structured model of the system was established using the structural analysis method. The isolation and detectability of faulty sensors were analyzed using the Dulmage–Mendelsohn decomposition method. Secondly, the minimum collision set method was used to calculate the minimum overdetermined equation set, transforming the higher-order system model into multiple related subsystem models, thereby reducing modeling complexity and facilitating system implementation. Next, residual vectors were constructed based on multiple subsystem models, and fault detection and isolation strategies were designed using the correlation between each subsystem model and the relevant sensors. The validation results of the physical testing platform based on online fault data recordings showed that the proposed method could achieve rapid fault detection and the localization of multi-sensor faults in PMTDS and had a good application value. [ABSTRACT FROM AUTHOR]

In recent years, most research on bearing fault diagnosis has assumed that the source domain and target domain data come from the same machine. The differences in equipment lead to a decrease in diagnostic accuracy. To address this issue, unsupervised domain adaptation techniques have been introduced. However, most cross-device fault diagnosis models overlook the discriminative information under the marginal distribution, which restricts the performance of the models. In this paper, we propose a bearing fault diagnosis method based on envelope spectrum and conditional metric learning. First, envelope spectral analysis is used to extract frequency domain features. Then, to fully utilize the discriminative information from the label distribution, we construct a deep Siamese convolutional neural network based on conditional metric learning to eliminate the data distribution differences and extract common features from the source and target domain data. Finally, dynamic weighting factors are employed to improve the convergence performance of the model and optimize the training process. Experimental analysis is conducted on 12 cross-device tasks and compared with other relevant methods. The results show that the proposed method achieves the best performance on all three evaluation metrics. [ABSTRACT FROM AUTHOR]

The abnormal wear of a rolling element bearing caused by early failures, such as pitting and spalling, will deteriorate the running state and reduce the life. This paper demonstrates the importance of oil debris monitoring and its effective feature extraction for bearing health assessment. In this paper, a rolling bearing-rotor test rig with forced lubrication is set up and the nonferrous contaminants with higher hardness were introduced artificially to accelerate the occurrence of pitting and spalling. The early failure and abnormal wear of rolling bearings cannot be effectively detected only through the vibration signal; the temperature and oil debris monitoring data are also collected synchronously. Two features regarding the ferrous particle size distribution are extracted and fused with vibration based-features to form a feature set. The sensitive features are extracted from the features set using the Neighborhood Component Analysis method to avoid feature redundancy. Finally, the importance of the oil debris based-features for the diagnosis of abnormal bearing wear is analyzed with different machine learning algorithms. Taking SVM classifier as an example, the experiment results show that the introduction of oil debris based-features increases the diagnostic accuracy by 15.7%. [ABSTRACT FROM AUTHOR]

A brief summary of the content associated with each of the chosen papers belonging to the Special Issue is given as follows: Advanced, vibration-based fault diagnosis and vibration control methods for mechanical and electrical systems should be useful for condition monitoring and vibration control designs. Kuo et al. [[8]] conducted a vibration test, conversion, and analysis of the signals, using characteristic extraction and machine learning with neural networks to obtain the failure mode diagnosis of a rotor-bearing system. Fault diagnosis and vibration control are the tracking of any aspect of an industry mechanical components' performance using reliably measured data and analytical simulations in conjunction with the heuristic experience, so that the current and expected future performance of the machine for at least the most critical limit events can be described in a proactive manner. Despite a lot of advancement in the field of fault diagnosis and vibration control methods, the advanced industry faces the following challenges while developing accurate fault diagnosis solutions. [Extracted from the article]

Because of its long running time, complex working environment, and for other reasons, a gear is prone to failure, and early failure is difficult to detect by direct observation; therefore, fault diagnosis of gears is very necessary. Neural network algorithms have been widely used to realize gear fault diagnosis, but the structure of the neural network model is complicated, the training time is long and the model is not easy to converge. To solve the above problems and combine the advantages of the ResNeXt50 model in the extraction of image features, this paper proposes a gearbox fault detection method that integrates the convolutional block attention module (CBAM). Firstly, the CBAM is embedded in the ResNeXt50 network to enhance the extraction of image channels and spatial features. Secondly, the different time–frequency analysis method was compared and analyzed, and the method with the better effect was selected to convert the one-dimensional vibration signal in the open data set of the gearbox into a two-dimensional image, eliminating the influence of the redundant background noise, and took it as the input of the model for training. Finally, the accuracy and the average training time of the model were obtained by entering the test set into the model, and the results were compared with four other classical convolutional neural network models. The results show that the proposed method performs well both in fault identification accuracy and average training time under two working conditions, and it also provides some references for existing gear failure diagnosis research. [ABSTRACT FROM AUTHOR]

It is essential to accurately diagnose bearing faults to avoid property losses or casualties in the industry caused by motor failures. Recently, the methods of fault diagnosis for bearings using deep learning methods have improved the safety of motor operations in a reliable and intelligent way. However, most of the work is mainly suitable for situations where there is sufficient monitoring data of the bearings. In industrial systems, only a small amount of monitoring data can be collected by the bearing sensors due to the harsh monitoring conditions and the short time of the signals of some special motor bearings. To solve the issue above, this paper introduces a transfer learning strategy by focusing on the multi-local model bearing fault based on small sample fusion. The algorithm mainly includes the following steps: (1) constructing a parallel Bi-LSTM sub-network to extract features from bearing vibration and current signals of industrial motor bearings, serially fusing the extracted vibration and current signal features for fault classification, and using them as a source domain fault diagnosis model; (2) measuring the distribution difference between the source domain bearing data and the target bearing data using the maximum mean difference algorithm; (3) based on the distribution differences between the source domain and the target domain, transferring the network parameters of the source domain fault diagnosis model, fine-tuning the network structure of the source domain fault diagnosis model, and obtaining the target domain fault diagnosis model. A performance evaluation reveals that a higher fault diagnosis accuracy under small sample fusion can be maintained by the proposed method compared to other methods. In addition, the early training time of the fault diagnosis model can be reduced, and its generalization ability can be improved to a great extent. Specifically, the fault diagnosis accuracy can be improved to higher than 80% while the training time can be reduced to 15.3% by using the proposed method. [ABSTRACT FROM AUTHOR]

To address the problem of mechanical defect identification in a high-voltage circuit breaker (HVCB), this paper studies the circuit breaker vibration signal and proposes a method of feature extraction based on phase-space reconstruction of the vibration substages. To locate mechanical defects in circuit breakers, vibration signals are divided into different substages according to the time sequence of the parts of the circuit breakers. The largest Lyapunov exponent (LLE) of the vibration signals' substages is calculated, and then the substages are reconstructed in high-dimensional phase space. The geometric features of the phase trajectory mean center distance (MCD) and vector diameter offset (VDO) are calculated, and the LLE, MCD, and VDO are selected as the three fault identification features of the vibration substages. The eigenvalue anomaly rate of each substage of the vibration signal under defect state are calculated and analyzed to locate the vibration substage of the mechanical defect. Finally, a fault diagnosis model is constructed by a support vector machine (SVM), and the common mechanical defects of circuit breakers simulated in the laboratory are effectively identified. [ABSTRACT FROM AUTHOR]

The paper focuses on the importance of prompt and efficient process fault detection in contemporary manufacturing industries, where product quality and safety protocols are critical. The study compares the efficiencies of two techniques for process fault detection: Kernel Principal Component Analysis (KPCA) and the observer method. Both techniques are applied to observe water volume variation within a hydraulic system comprising three tanks. PCA is an unsupervised learning technique used for dimensionality reduction and pattern recognition. It is an extension of Principal Component Analysis (PCA) that utilizes kernel functions to transform data into higher-dimensional spaces, where it becomes easier to separate classes or identify patterns. In this paper, KPCA is applied to detect faults in the hydraulic system by analyzing the variation in water volume. The observer method originates from control theory and is utilized to estimate the internal states of a system based on its output measurements. It is commonly used in control systems to estimate the unmeasurable or hidden states of a system, which is crucial for ensuring proper control and fault detection. In this study, the observer method is applied to the hydraulic system to estimate the water volume variations within the three tanks. The paper presents a comparative study of these two techniques applied to the hydraulic system. The results show that both KPCA and the observer method perform similarly in detecting faults within the system. This similarity in performance highlights the efficacy of these techniques and their potential adaptability in various fault diagnosis scenarios within modern manufacturing processes. [ABSTRACT FROM AUTHOR]

Diesel engines have a wide range of functions in the industrial and military fields. An urgent problem to be solved is how to diagnose and identify their faults effectively and timely. In this paper, a diesel engine acoustic fault diagnosis method based on variational modal decomposition mapping Mel frequency cepstral coefficients (MFCC) and long-short-term memory network is proposed. Variational mode decomposition (VMD) is used to remove noise from the original signal and differentiate the signal into multiple modes. The sound pressure signals of different modes are mapped to the Mel filter bank in the frequency domain, and then the Mel frequency cepstral coefficients of the respective mode signals are calculated in the mapping range of frequency domain, and the optimized Mel frequency cepstral coefficients are used as the input of long and short time memory network (LSTM) which is trained and verified, and the fault diagnosis model of the diesel engine is obtained. The experimental part compares the fault diagnosis effects of different feature extraction methods, different modal decomposition methods and different classifiers, finally verifying the feasibility and effectiveness of the method proposed in this paper, and providing solutions to the problem of how to realise fault diagnosis using acoustic signals. [ABSTRACT FROM AUTHOR]

Impulsive blind deconvolution (IBD) is a popular method to recover impulsive sources for bearing fault diagnosis. Its underpinnings are in the design of objective functions based on prior knowledge of impulsive sources and a transfer function to describe transmission path influences. However, popular objective functions cannot retain waveform impulsiveness and periodicity cyclostationarity simultaneously, and the single convolution operation of IBD methods is insufficient to describe transmission paths composed of multiple linear and nonlinear units. Inspired by the MaxPooling period modulation intensity (MPMI) and convolutional sparse learning (CSL), an adaptive multi-D-norm-driven sparse unfolding deconvolution network (AMD-SUDN) is proposed in this paper. The core strategy is that one target vector with simultaneous impulsiveness and cyclostationarity is constructed automatically through the MPMI; then, this vector is substituted into the multi D-norm to design objective functions. Moreover, an iterative soft threshold algorithm (ISTA) for the CSL model is derived, and its iterative steps are unfolded into one deconvolution network. The algorithm's performance and the hyperparameter configuration are investigated by a set of numerical simulations. Finally, the proposed AMD-SUDN is applied to detect the impulsive features of bearing faults. All comparative results verify that the proposed AMD-SUDN achieves a better deconvolution accuracy than state-of-the-art IBD methods. [ABSTRACT FROM AUTHOR]

Synchrosqueezed transform (SST) is a time–frequency analysis method that can improve energy aggregation and reconstruct signals, which has been applied in the fields of medical treatment, fault diagnosis, and seismic wave processing. However, when dealing with time-varying signals, SST suffers from poor time–frequency resolution and is unable to deal with long signals. In order to accurately extract the characteristic frequency of variable speed rolling bearing faults, this paper proposes a synchrosqueezed transform method based on fast kurtogram and demodulation and piecewise aggregate approximation (PAA). The method firstly filters and demodulates the original signal using fast kurtogram and Hilbert transform to reduce the influence of background noise and improve the time–frequency resolution. Then, it compresses the signal by using piecewise aggregate approximation, so that the SST can deal with long signals and, thus, extract the fault characteristic frequency. The experimental data verification results indicate that the method can effectively identify the fault characteristic frequency of variable-speed rolling bearings. [ABSTRACT FROM AUTHOR]

In the process of the intelligent inspection of belt conveyor systems, due to problems such as its long duration, the large number of rollers, and the complex working environment, fault diagnosis by acoustic signals is easily affected by signal coupling interference, which poses a great challenge to selecting denoising methods of signal preprocessing. This paper proposes a novel wavelet threshold denoising algorithm by integrating a new biparameter and trisegment threshold function. Firstly, we elaborate on the mutual influence and optimization process of two adjustment parameters and three wavelet coefficient processing intervals in the BT-WTD (the biparameter and trisegment of wavelet threshold denoising, BT-WTD) denoising model. Subsequently, the advantages of the proposed threshold function are theoretically demonstrated. Finally, the BT-WTD algorithm is applied to denoise the simulation signals and the vibration and acoustic signals collected from the belt conveyor experimental platform. The experimental results indicate that this method's denoising effectiveness surpasses that of traditional threshold function denoising algorithms, effectively addressing the denoising preprocessing of idler roller fault signals under strong noise backgrounds while preserving useful signal features and avoiding signal distortion problems. This research lays the theoretical foundation for the non-contact intelligent fault diagnosis of future inspection robots based on acoustic signals. [ABSTRACT FROM AUTHOR]

As multiprocessor systems continue to grow in processor scale, the incidence of faults also increases. As a result, fault diagnosis is becoming a key mechanism for maintaining the normal operation of multiprocessor systems. To explore more effective diagnostic methods, Somani et al. introduced a generalized pessimistic diagnostic strategy, named t / k -diagnosis, in which all faulty nodes are isolated in a set of nodes and at most k fault-free nodes are misdiagnosed, provided that the quantity of faults is limited by t. By imposing certain conditions or restrictions, the t / k -diagnosability of some regular networks under the Preparata, Metze, and Chien (PMC) model has been determined. However, the t / k -diagnosability of many networks under the comparison model remains unidentified. In this paper, we provide new insights into the study of t / k -diagnosability under the comparison model. After introducing some new notions, such as the 0-test unit, 0-test set and 0-test subgraph, under the comparison model, we study the relationship in a system G between the 0-test subgraphs and the components of G − F , where F is the set of faulty nodes, and we obtain some important correlation properties. Based on these results, we study t / k -diagnosability under the comparison model. As a result, the t / k -diagnosability of some regular interconnection networks can be efficiently determined. [ABSTRACT FROM AUTHOR]

With the rapid development of smart manufacturing, data-driven deep learning (DL) methods are widely used for bearing fault diagnosis. Aiming at the problem of model training crashes when data are imbalanced and the difficulty of traditional signal analysis methods in effectively extracting fault features, this paper proposes an intelligent fault diagnosis method of rolling bearings based on Gramian Angular Difference Field (GADF) and Improved Dual Attention Residual Network (IDARN). The original vibration signals are encoded as 2D-GADF feature images for network input; the residual structures will incorporate dual attention mechanism to enhance the integration ability of the features, while the group normalization (GN) method is introduced to overcome the bias caused by data discrepancies; and then the model is trained to complete the classification of faults. In order to verify the superiority of the proposed method, the data obtained from Case Western Reserve University (CWRU) bearing data and bearing fault experimental equipment were compared with other popular DL methods, and the proposed model performed optimally. The method eventually achieved an average identification accuracy of 99.2% and 97.9% on two different types of datasets, respectively. [ABSTRACT FROM AUTHOR]

Deep transfer learning has been widely used to improve the versatility of models. In the problem of cross-domain fault diagnosis in rolling bearings, most models require that the given data have a similar distribution, which limits the diagnostic effect and generalization of the model. This paper proposes a deep reconstruction transfer convolutional neural network (DRTCNN), which satisfies the domain adaptability of the model under cross-domain conditions. Firstly, the model uses a deep reconstruction convolutional automatic encoder for feature extraction and data reconstruction. Through sharing parameters and unsupervised training, the structural information of target domain samples is effectively used to extract domain-invariant features. Secondly, a new subdomain alignment loss function is introduced to align the subdomain distribution of the source domain and the target domain, which can improve the classification accuracy by reducing the intra-class distance and increasing the inter-class distance. In addition, a label smoothing algorithm considering the credibility of the sample is introduced to train the model classifier to avoid the impact of wrong labels on the training process. Three datasets are used to verify the versatility of the model, and the results show that the model has a high accuracy and stability. [ABSTRACT FROM AUTHOR]

This paper aims at achieving real-time optimal speed estimation for an induction motor using the Extended Kalman filter (EKF). Speed estimation is essential for fault diagnosis in Motor Current Signature Analysis (MCSA). The estimation accuracy is obtained by exploring the noise covariance matrices estimation of the EKF algorithm. The noise covariance matrices are determined using a modified subspace model identification approach. In order to reach this goal, this method compares an estimated model of a deterministic system, derived from available input–output datasets (using voltage–current sensors), with the discrete-time state-space representation used in the Kalman filter equations. This comparison leads to the determination of model uncertainties, which are subsequently represented as noise covariance matrices. Based on the fifth-order nonlinear model of the induction motor, the rotor speed is estimated with the optimized EKF algorithm, and the algorithm is tested experimentally. [ABSTRACT FROM AUTHOR]

The electrical energy supply relies on the satisfactory operation of insulators. The ultrasound recorded from insulators in different conditions has a time series output, which can be used to classify faulty insulators. The random convolutional kernel transform (Rocket) algorithms use convolutional filters to extract various features from the time series data. This paper proposes a combination of Rocket algorithms, machine learning classifiers, and empirical mode decomposition (EMD) methods, such as complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), empirical wavelet transform (EWT), and variational mode decomposition (VMD). The results show that the EMD methods, combined with MiniRocket, significantly improve the accuracy of logistic regression in insulator fault diagnosis. The proposed strategy achieves an accuracy of 0.992 using CEEMDAN, 0.995 with EWT, and 0.980 with VMD. These results highlight the potential of incorporating EMD methods in insulator failure detection models to enhance the safety and dependability of power systems. [ABSTRACT FROM AUTHOR]

Compared with traditional two-level inverters, multilevel inverters have many solid-state switches and complex composition methods. Therefore, diagnosing and treating inverter faults is a prerequisite for the reliable and efficient operation of the inverter. Based on the idea of intelligent complementary fusion, this paper combines the genetic algorithm–binary granulation matrix knowledge-reduction method with the extreme learning machine network to propose a fault-diagnosis method for multi-tube open-circuit faults in T-type three-level inverters. First, the fault characteristics of power devices at different locations of T-type three-level inverters are analyzed, and the inverter output power and its harmonic components are extracted as the basis for power device fault diagnosis. Second, the genetic algorithm–binary granularity matrix knowledge-reduction method is used for optimization to obtain the minimum attribute set required to distinguish the state transitions in various fault cases. Finally, the kernel attribute set is utilized to construct extreme learning machine subclassifiers with corresponding granularity. The experimental results show that the classification accuracy after attribute reduction is higher than that of all subclassifiers under different attribute sets, reflecting the advantages of attribute reduction and the complementarity of different intelligent diagnosis methods, which have stronger fault-diagnosis accuracy and generalization ability compared with the existing methods and provides a new way for hybrid intelligent diagnosis. [ABSTRACT FROM AUTHOR]

This paper proposes a new fault diagnosis method for centrifugal pumps by combining signal processing with deep learning techniques. Centrifugal pumps facilitate fluid transport through the energy generated by the impeller. Throughout the operation, variations in the fluid pressure at the pump's inlet may impact the generalization of traditional machine learning models trained on raw statistical features. To address this concern, first, vibration signals are collected from centrifugal pumps, followed by the application of a lowpass filter to isolate frequencies indicative of faults. These signals are then subjected to a continuous wavelet transform and Stockwell transform, generating two distinct time–frequency scalograms. The Sobel filter is employed to further highlight essential features within these scalograms. For feature extraction, this approach employs two parallel convolutional autoencoders, each tailored for a specific scalogram type. Subsequently, extracted features are merged into a unified feature pool, which forms the basis for training a two-layer artificial neural network, with the aim of achieving accurate fault classification. The proposed method is validated using three distinct datasets obtained from the centrifugal pump under varying inlet fluid pressures. The results demonstrate classification accuracies of 100%, 99.2%, and 98.8% for each dataset, surpassing the accuracies achieved by the reference comparison methods. [ABSTRACT FROM AUTHOR]

In order to address the challenges of low recognition accuracy and the difficulty in effective diagnosis in traditional converter transformer voiceprint fault diagnosis, a novel method is proposed in this article. This approach takes account of the impact of load factors, utilizes a multi-strategy improved Mel-Frequency Spectrum Coefficient (MFCC) for voiceprint signal feature extraction, and combines it with a temporal convolutional network for fault diagnosis. Firstly, it improves the hunter–prey optimizer (HPO) as a parameter optimization algorithm and adopts IHPO combined with variational mode decomposition (VMD) to achieve denoising of voiceprint signals. Secondly, the preprocessed voiceprint signal is combined with Mel filters through the Stockwell transform. To adapt to the stationary characteristics of the voiceprint signal, the processed features undergo further mid-temporal processing, ultimately resulting in the implementation of a multi-strategy improved MFCC for voiceprint signal feature extraction. Simultaneously, load signal segmentation is introduced for the diagnostic intervals, forming a joint feature vector. Finally, by using the Mish activation function to improve the temporal convolutional network, the IHPO-ITCN is proposed to adaptively optimize the size of convolutional kernels and the number of hidden layers and construct a transformer fault diagnosis model. By constructing multiple sets of comparison tests through specific examples and comparing them with the traditional voiceprint diagnostic model, our results show that the model proposed in this paper has a fault recognition accuracy as high as 99%. The recognition accuracy was significantly improved and the training speed also shows superior performance, which can be effectively used in the field of multiple fault diagnosis of converter transformers. [ABSTRACT FROM AUTHOR]

This paper proposes a monitoring procedure based on characterizing state probability distributions estimated using particle filters. The work highlights what types of information can be obtained during state estimation and how the revealed information helps to solve fault diagnosis tasks. If a failure is present in the system, the output predicted by the model is inconsistent with the actual output, which affects the operation of the estimator. The heterogeneity of the probability distribution of states increases, and a large proportion of the particles lose their information content. The correlation structure of the posterior probability density can also be altered by failures. The proposed method uses various indicators that characterize the heterogeneity and correlation structure of the state distribution, as well as the consistency between model predictions and observed behavior, to identify the effects of failures.The applicability of the utilized measures is demonstrated through a dynamic vehicle model, where actuator and sensor failure scenarios are investigated. [ABSTRACT FROM AUTHOR]

With the continuous development of artificial intelligence, data-driven fault diagnosis methods are gradually attracting widespread attention. However, in practical industrial applications, noise in the working environment is inevitable. This leads to the fact that the performance of traditional intelligent diagnosis methods is hardly sufficient to satisfy the requirements. In this paper, a developed intelligent diagnosis framework is proposed to overcome this deficiency. The main contributions of this paper are as follows: Firstly, a fault diagnosis model is established using EfficientNet, which achieves optimal diagnosis performance with limited computing resources. Secondly, an attention mechanism is introduced into the basic model for accurately establishing the relationship between fault features and fault modes, while improving the diagnosis accuracy in complex noise environments. Finally, to explain the proposed method, the weights and features of the model are visualized, and further attempts are made to analyze the reasons for the high performance of the model. The comprehensive experiment results reveal the superiority of the proposed method in terms of accuracy and stability in comparison with other benchmark diagnosis approaches. The diagnostic accuracy under actual working conditions is 86.24%. [ABSTRACT FROM AUTHOR]

Aiming at the problems of low fault diagnosis accuracy caused by insufficient samples and unbalanced data sample distribution in bearing fault diagnosis, this paper proposes a fault diagnosis method for rolling bearings referencing conditional deep convolution adversarial generative networks (C−DCGAN) for efficient data augmentation. Firstly, the concept of conditional constraints is used to guide and improve the sample generation process of the original generative adversarial network, and specific constraints are added to the data generation model to perform a balanced expansion of muti-category fault data for small sample data sets. Secondly, aiming at the phenomena of training instability, gradient disappearance and gradient explosion in the imbalanced sample set, it is proposed to optimize the structure of the generative network by using the structure of self-defined skip connections and spectral normalization, while using the Wasserstein distance with penalty term instead of cross entropy. The function is used as the loss function of the generative adversarial network to improve the stable feature extraction ability of the generative network and the effect of the training process; in this way, simulation sample data with only a small variation from the real data distribution can be generated. Finally, the complete fault data set (after mixing the original data with sufficient fault category and sample number) and the generated data are input into the one-dimensional convolution neural network for fault diagnosis of rolling bearing. The experiment's results show that the diagnosis method in this paper can improve the fault classification effect of rolling bearings by generating balanced and sufficient sample data. [ABSTRACT FROM AUTHOR]

The quality of rolling bearings is vital for the working state and rotation accuracy of the shaft. Timely and accurately acquiring bearing status and early fault diagnosis can effectively prevent losses, making it highly practical. To improve the accuracy of bearing fault diagnosis, this paper proposes a CNN-LSTM bearing fault diagnosis model optimized by hybrid particle swarm optimization (HPSO). The HPSO algorithm has a strong global optimization ability and can effectively solve nonlinear and multivariate optimization problems. It is used to optimize and match the parameters of the CNN-LSTM model and dynamically find the optimal value of the parameters. This model overcomes the problem that the parameters of the CNN-LSTM model depend on empirical settings and cannot be adjusted dynamically. This model is used for bearing fault diagnosis, and the accuracy rate of fault diagnosis classification reaches 99.2%. Compared with the traditional CNN, LSTM, and CNN-LSTM models, the accuracy rates are increased by 6.6%, 9.2%, and 5%, respectively. At the same time, comparing the models with different optimization parameters shows that the model proposed in this paper has the highest accuracy. The experimental results verified the superiority of the HPSO algorithm to optimize model parameters and the feasibility and accuracy of the HPSO-CNN-LSTM model for bearing fault diagnosis. [ABSTRACT FROM AUTHOR]

Fault diagnosis is essential for high energy systems such as liquid rocket engines (LREs) due to harsh thermal and mechanical working environment. In this study, a novel method based on one-dimension Convolutional Neural Network (1D-CNN) and interpretable bidirectional Long Short-term Memory (LSTM) is proposed for intelligent fault diagnosis of LREs. 1D-CNN is responsible for extracting sequential signals collected from multi sensors. Then the interpretable LSTM is developed to model the extracted features, which contributes to modeling the temporal information. The proposed method was executed for fault diagnosis using the simulated measurement data of the LRE mathematical model. The results demonstrate the proposed algorithm outperforms other methods in terms of accuracy of fault diagnosis. Through experimental verification, the method proposed in this paper was compared with CNN, 1DCNN-SVM and CNN-LSTM in terms of LRE startup transient fault recognition performance. The model proposed in this paper had the highest fault recognition accuracy (97.39%). [ABSTRACT FROM AUTHOR]