Search

Monitoring object displacement is critical for structural health monitoring (SHM). Radio frequency identification (RFID) sensors can be used for this purpose. Using more sensors enhances displacement estimation accuracy, especially when it is realized through the use of machine learning (ML) algorithms for predicting the direction of arrival of the associated signals. Our research shows that ML algorithms, in conjunction with adequate RFID passive sensor data, can precisely evaluate azimuth angles. However, increasing the number of sensors can lead to gaps in the data, which typical numerical methods such as interpolation and imputation may not fully resolve. To overcome this challenge, we propose enhancing the sensitivity of 3D-printed passive RFID sensor arrays using a novel photoluminescence-based RF signal enhancement technique. This can boost received RF signal levels by 2 dB to 8 dB, depending on the propagation mode (near-field or far-field). Hence, it effectively mitigates the issue of missing data without necessitating changes in transmit power levels or the number of sensors. This approach, which enables remote shaping of radiation patterns via light, can herald new prospects in the development of smart antennas for various applications apart from SHM, such as biomedicine and aerospace. [ABSTRACT FROM AUTHOR]

In this paper, we consider the gain-phase error calibration problem for uniform linear arrays (ULAs). Based on the adaptive antenna nulling technique, a new gain-phase error pre-calibration method is proposed, requiring only one calibration source with known direction of arrival (DOA). In the proposed method, a ULA with M array elements is divided into M − 1 sub-arrays, and the gain-phase error of each sub-array can be uniquely extracted one by one. Furthermore, in order to obtain the accurate gain-phase error in each sub-array, we formulate an errors-in-variables (EIV) model and present a weighted total least-squares (WTLS) algorithm by exploiting the structure of the received data on sub-arrays. In addition, the solution to the proposed WTLS algorithm is exactly analyzed in the statistical sense, and the spatial location of the calibration source is also discussed. Simulation results demonstrate the efficiency and feasibility of our proposed method in both large-scale and small-scale ULAs and the superiority to some state-of-the-art gain-phase error calibration approaches. [ABSTRACT FROM AUTHOR]

In this paper, a dual-band graphene coplanar waveguide antenna is designed for smart cities and internet of things applications. A graphene film is chosen as the conductive material for the radiation patches and ground plane with a thickness of 240 μm and an electric conductivity of 3.5 × 105 S/m. The dielectric is glass with a dielectric permittivity of 6 and a thickness of 2 mm. The implementation of the antenna on glass permits the integration of the antenna in smart cities and IoT applications. This antenna is based on two trapezoidal patches that generate the dual-band behavior. The overall dimensions of the antenna are 30 mm × 30 mm × 2 mm. The reflection coefficient, gain, and radiation patterns were measured and compared with the simulations. The antenna covers two frequency bands; the lower band covers the 2.45 GHz ISM band, and the upper band range covers from 4 to 7 GHz. [ABSTRACT FROM AUTHOR]

Industry 4.0 is a new paradigm of digitalization and automation that demands high data rates and real-time ultra-reliable agile communication. Industrial communication at sub-6 GHz industrial, scientific, and medical (ISM) bands has some serious impediments, such as interference, spectral congestion, and limited bandwidth. These limitations hinder the high throughput and reliability requirements of modern industrial applications and mission-critical scenarios. In this paper, we critically assess the potential of the 60 GHz millimeter-wave (mmWave) ISM band as an enabler for ultra-reliable low-latency communication (URLLC) in smart manufacturing, smart factories, and mission-critical operations in Industry 4.0 and beyond. A holistic overview of 60 GHz wireless standards and key performance indicators are discussed. Then the review of 60 GHz smart antenna systems facilitating agile communication for Industry 4.0 and beyond is presented. We envisage that the use of 60 GHz communication and smart antenna systems are crucial for modern industrial communication so that URLLC in Industry 4.0 and beyond could soar to its full potential. [ABSTRACT FROM AUTHOR]

A compact flexible multi-frequency antenna for smart portable and flexible devices is presented. The antenna consists of a coplanar waveguide-fed slotted circular patch connected to a rectangular secondary resonator (stub). A thin low-loss substrate is used for flexibility, and a rectangular stub in the feedline is deployed to attain wide operational bandwidth. A rectangular slot is etched in the middle of the circular patch, and a p-i-n diode is placed at its center. The frequency reconfigurability is achieved through switching the diode that distributes the current by changing the antenna's electrical length. For the ON state, the antenna operates in the UWB region for −10 dB impedance bandwidth from 2.76 to 8.21 GHz. For the OFF state of the diode, the antenna operates at the ISM band (2.45/5.8 GHz), WLAN band (5.2 GHz), and lower X-band (8 GHz) with a minimum gain of 2.49 dBi and a maximum gain of 5.8 dBi at the 8 GHz band. Moreover, the antenna retains its performance in various bending conditions. The proposed antenna is suitable for modern miniaturized wireless electronic devices such as wearables, health monitoring sensors, mobile Internet devices, and laptops that operate at multiple frequency bands. [ABSTRACT FROM AUTHOR]

This paper proposes a new low complexity angle of arrival (AOA) method for signal direction estimation in multi-element smart wireless communication systems. The new method estimates the AOAs of the received signals directly from the received signals with significantly reduced complexity since it does not need to construct the correlation matrix, invert the matrix or apply eigen-decomposition, which are computationally expensive. A mathematical model of the proposed method is illustrated and then verified using extensive computer simulations. Both linear and circular sensors arrays are studied using various numerical examples. The method is systematically compared with other common and recently introduced AOA methods over a wide range of scenarios. The simulated results showthat the newmethod has several advantages in terms of reduced complexity and improved accuracy under the assumptions of correlated signals and limited numbers of snapshots. [ABSTRACT FROM AUTHOR]

Multichannel receivers are usually employed in high-rate underwater acoustic communication to achieve spatial diversity. In the context of multichannel underwater acoustic communications, passive time reversal (TR) combined with a single-channel adaptive decision feedback equalizer (TR-DFE) is a low-complexity solution to achieve both spatial and temporal focusing. In this paper, we present a novel receiver structure to combine passive time reversal with a low-order multichannel adaptive decision feedback equalizer (TR-MC-DFE) to improve the performance of the conventional TR-DFE. First, the proposed method divides the whole received array into several subarrays. Second, we conduct passive time reversal processing in each subarray. Third, the multiple subarray outputs are equalized with a low-order multichannel DFE. We also investigated different channel estimation methods, including least squares (LS), orthogonal matching pursuit (OMP), and improved proportionate normalized least mean squares (IPNLMS). The bit error rate (BER) and output signal-to-noise ratio (SNR) performances of the receiver algorithms are evaluated using simulation and real data collected in a lake experiment. The source-receiver range is 7.4 km, and the data rate with quadrature phase shift keying (QPSK) signal is 8 kbits/s. The uncoded BER of the single input multiple output (SIMO) systems varies between 1 x 10-1 and 2 x 10-2 for the conventional TR-DFE, and between 1 x 10-2 and 1 x 10-3 for the proposed TR-MC-DFE when eight hydrophones are utilized. Compared to conventional TR-DFE, the average output SNR of the experimental data is enhanced by 3 dB. [ABSTRACT FROM AUTHOR]

Adaptive antenna array processing is widely known to provide significant anti-interference capabilities within a Global Navigation Satellite Systems (GNSS) receiver. A main challenge in the quest for such receiver architecture has always been the computational/processing requirements. Even more demanding would be to try and incorporate the flexibility of the Software-Defined Radio (SDR) design philosophy in such an implementation. This paper documents a feasible approach to a real-time SDR implementation of a beam-steered GNSS receiver and validates its performance. This research implements a real-time software receiver on a widely-available x86-based multi-core microprocessor to process four-element antenna array data streams sampled with 16-bit resolution. The software receiver is capable of 12 channels all-in-view Controlled Reception Pattern Antenna (CRPA) array processing capable of rejecting multiple interferers. Single Instruction Multiple Data (SIMD) instructions assembly coding and multithreaded programming, the key to such an implementation to reduce computational complexity, are fully documented within the paper. In conventional antenna array systems, receivers use the geometry of antennas and cable lengths known in advance. The documented CRPA implementation is architected to operate without extensive set-up and pre-calibration and leverages Space-Time Adaptive Processing (STAP) to provide adaptation in both the frequency and space domains. The validation component of the paper demonstrates that the developed software receiver operates in real time with live Global Positioning System (GPS) and Wide Area Augmentation System (WAAS) L1 C/A code signal. Further, interference rejection capabilities of the implementation are also demonstrated using multiple synthetic interferers which are added to the live data stream. [ABSTRACT FROM AUTHOR]

Wireless sensor networks (WSN) are increasingly requiring directional antennas that not only provide higher capacity, security, transmission range or robustness against interference, but also contribute with smart antenna capabilities such as adaptive beamforming or multi beam radiation patterns. Standard phased arrays provide these features, but employing feeding networks based on digitally controlled variable phase shifters (VPSs) which have the disadvantage of high cost and limited angular resolution. Instead, time-modulated arrays (TMAs) use switched feeding networks governed by digital periodic sequences which allow harmonic patterns to be radiated and endows (TMAs) with attractive multifunctional capabilities. In this paper, we analyze and properly combine (TMA) switched feeding networks capable of time-modulating an antenna array with discretized amplitude modulation (AM) and phase modulation (PM) waveforms. The advantages of the proposed innovative dual-beam (TMA) with respect to the competing architectures are, on the one hand, its power efficiency and beamsteering (BS) phase sensitivity and, on the other, its hardware simplicity, which allows for an excellent relative cost advantage. [ABSTRACT FROM AUTHOR]

Electronic textiles have become a dynamic research field in recent decades, attracting attention to smart wearables to develop and integrate electronic devices onto clothing. Combining traditional screen-printing techniques with novel nanocarbon-based inks offers seamless integration of flexible and conformal antenna patterns onto fabric substrates with a minimum weight penalty and haptic disruption. In this study, two different fabric-based antenna designs called PICA and LOOP were fabricated through a scalable screen-printing process by tuning the conductive ink formulations accompanied by cellulose nanocrystals. The printing process was controlled and monitored by revealing the relationship between the textiles' nature and conducting nano-ink. The fabric prototypes were tested in dynamic environments mimicking complex real-life situations, such as being in proximity to a human body, and being affected by wrinkling, bending, and fabric care such as washing or ironing. Both computational and experimental on-and-off-body antenna gain results acknowledged the potential of tunable material systems complimenting traditional printing techniques for smart sensing technology as a plausible pathway for future wearables. [ABSTRACT FROM AUTHOR]

The opportunistic exchange of information between vehicles can significantly contribute to reducing the occurrence of accidents and mitigating their damages. However, in urban environments, especially at intersection scenarios, obstacles such as buildings and walls block the line of sight between the transmitter and receiver, reducing the vehicular communication range and thus harming the performance of road safety applications. Furthermore, the sizes of the surrounding vehicles and weather conditions may affect the communication. This makes communications in urban V2V communication scenarios extremely difficult. Since the late notification of vehicles or incidents can lead to the loss of human lives, this paper focuses on improving urban vehicle-to-vehicle (V2V) communications at intersections by using a transmission scheme able of adapting to the surrounding environment. Therefore, we proposed a neuroevolution of augmenting topologies-based adaptive beamforming scheme to control the radiation pattern of an antenna array and thus mitigate the effects generated by shadowing in urban V2V communication at intersection scenarios. This work considered the IEEE 802.11p standard for the physical layer of the vehicular communication link. The results show that our proposal outperformed the isotropic antenna in terms of the communication range and response time, as well as other traditional machine learning approaches, such as genetic algorithms and mutation strategy-based particle swarm optimization. [ABSTRACT FROM AUTHOR]

Wireless sensor networks (WSNs) have long been used for many applications. The efficiency of a WSN is subject to its monitoring accuracy and limited energy capacity. Thus, accurate detection and limited energy are two crucial problems for WSNs. Some studies have focused on building energy-efficient transmission mechanisms to extend monitoring lifetimes, and others have focused on building additional systems to support monitoring for enhanced accuracy. Herein, we propose a distributed cooperative mechanism where neighboring sensors mutually confirm event occurrences for improved monitoring accuracy. Moreover, the mechanism transmits events in a time- and energy-efficient manner by using smart antennae to extend monitoring lifetimes. The results of the simulations reveal that monitoring lifetime is extended and time for event notifications is shortened under the proposed mechanism. The evaluations also demonstrate that the monitoring accuracy of the proposed mechanism is much higher than that of other existing mechanisms. [ABSTRACT FROM AUTHOR]

In this paper, an improved differential evolution (DE) algorithm with the successful-parent-selecting (SPS) framework, named SPS-JADE, is applied to the pattern synthesis of linear antenna arrays. Here, the pattern synthesis of the linear antenna arrays is viewed as an optimization problem with excitation amplitudes being the optimization variables and attaining sidelobe suppression and null depth being the optimization objectives. For this optimization problem, an improved DE algorithm named JADE is introduced, and the SPS framework is used to solve the stagnation problem of the DE algorithm, which further improves the DE algorithm's performance. Finally, the combined SPS-JADE algorithm is verified in simulation experiments of the pattern synthesis of an antenna array, and the results are compared with those obtained by other state-of-the-art random optimization algorithms. The results demonstrate that the proposed SPS-JADE algorithm is superior to other algorithms in the pattern synthesis performance with a lower sidelobe level and a more satisfactory null depth under the constraint of beamwidth requirement. [ABSTRACT FROM AUTHOR]

This paper shows the results of an investigation on the self-structuring antenna. This antenna consists of a combination of planar paths interconnected by controllable switches. A numerical electromagnetics code (NEC) environment and application with implemented genetic algorithms were used in this research. As a result of the investigation, an antenna template was built and measured. [ABSTRACT FROM AUTHOR]

Concrete failure will lead to serious safety concerns in the performance of a building structure. It is one of the biggest challenges for engineers to inspect and maintain the quality of concrete throughout the service years in order to prevent structural deterioration. To date, a lot of research is ongoing to develop different instruments to inspect concrete quality. Detection of moisture ingress is important in the structural monitoring of concrete. This paper presents a novel sensing technique using a smart antenna for the non-destructive evaluation of moisture content and deterioration inspection in concrete blocks. Two different standard concrete samples (United Kingdom and Malaysia) were investigated in this research. An electromagnetic (EM) sensor was designed and embedded inside the concrete to detect the moisture content within the structure. In addition, CST microwave studio was used to validate the theoretical model of the EM sensor against the test data. The results demonstrated that the EM sensor at 2.45 GHz is capable of detecting the moisture content in the concrete with linear regression of R2 = 0.9752. Furthermore, identification of different mix ratios of concrete were successfully demonstrated in this paper. In conclusion, the EM sensor is capable of detecting moisture content non-destructively and could be a potential technique for maintenance and quality control of the building performance. [ABSTRACT FROM AUTHOR]