Search

As an essential mechanical device in many industrial applications, reciprocating compressors have a high demand for operating efficiency and availability. Because the temperature of each part of a reciprocating compressor depends considerably on operating conditions, faults in any parts will cause the variation of the temperature distribution, which provides the possibility to distinguish the fault type of reciprocating compressors by differentiating the distribution using infrared thermal imaging. In this paper, three types of common fault are laboratory experimented in an uncontrolled temperature environment. The temperature distribution signals of a reciprocating compressor are captured by a non-contact infrared camera remotely in the form of heat maps during the experimental process. Based on the temperature distribution under baseline condition, temperature fields of six main components were selected via Hue-Saturation-Value (HSV) image as diagnostic features. During the experiment, the average grayscale values of each component were calculated to form 6-dimension vectors to represent the variation of the temperature distribution. A computational efficient multiclass support vector machine (SVM) model is then used for classifying the differences of the distributions, and the classification results demonstrate that the average temperatures of six main components aided by SVM is a promising technique to diagnose the faults of reciprocating compressors under various operating conditions with a classification accuracy of more than 99%. [ABSTRACT FROM AUTHOR]

The vibration of a planetary gearbox (PG) is complex and mutually modulated, which makes the weak features of incipient fault difficult to detect. To target this problem, a novel method, based on an adaptive order bispectrum slice (AOBS) and the fault characteristics energy ratio (FCER), is proposed. The order bispectrum (OB) method has shown its effectiveness in the feature extraction of bearings and fixed-shaft gearboxes. However, the effectiveness of the PG still needs to be explored. The FCER is developed to sum up the fault information, which is scattered by mutual modulation. In this method, the raw vibration signal is firstly converted to that in the angle domain. Secondly, the characteristic slice of AOBS is extracted. Different from the conventional OB method, the AOBS is extracted by searching for a characteristic carrier frequency adaptively in the sensitive range of signal coupling. Finally, the FCER is summed up and calculated from the fault features that were dispersed in the characteristic slice. Experimental data was processed, using both the AOBS-FCER method, and the method that combines order spectrum analysis with sideband energy ratio (OSA-SER), respectively. Results indicated that the new method is effective in incipient fault feature extraction, compared with the methods of OB and OSA-SER. [ABSTRACT FROM AUTHOR]

To realize the accurate fault detection of rolling element bearings, a novel fault detection method based on non-stationary vibration signal analysis using weighted average ensemble empirical mode decomposition (WAEEMD) and modulation signal bispectrum (MSB) is proposed in this paper. Bispectrum is a third-order statistic, which can not only effectively suppress Gaussian noise, but also help identify phase coupling. However, it cannot effectively decompose the modulation components which are inherent in vibration signals. To alleviate this issue, MSB based on the modulation characteristics of the signals is developed for demodulation and noise reduction. Still, the direct application of MSB has some interfering frequency components when extracting fault features from non-stationary signals. Ensemble empirical mode decomposition (EEMD) is an advanced nonlinear and non-stationary signal processing approach that can decompose the signal into a list of stationary intrinsic mode functions (IMFs). The proposed method takes advantage of WAEEMD and MSB for bearing fault diagnosis based on vibration signature analysis. Firstly, the vibration signal is decomposed into IMFs with a different frequency band using EEMD. Then, the IMFs are reconstructed into a new signal by the weighted average method, called WAEEMD, based on Teager energy kurtosis (TEK). Finally, MSB is applied to decompose the modulated components in the reconstructed signal and extract the fault characteristic frequencies for fault detection. Furthermore, the efficiency and performance of the proposed WAEEMD-MSB approach is demonstrated on the fault diagnosis for a motor bearing outer race fault and a gearbox bearing inner race fault. The experimental results verify that the WAEEMD-MSB has superior performance over conventional MSB and EEMD-MSB in extracting fault features and has precise and effective advantages for rolling element bearing fault detection. [ABSTRACT FROM AUTHOR]

Fault identification for closed-loop control systems is a future trend in the field of fault diagnosis. Due to the inherent feedback adjustment mechanism, a closed-loop control system is generally very robust to external disturbances and internal noises. Closed-loop control systems often encourage faults to propagate inside the systems, which may lead to the consequence that faults amplitude becomes smaller and fault characteristics difference becomes more inapparent. Hence, it has been challenging to achieve fault identification for such systems. Traditional fault identification methods are not particularly designed for closed-loop control systems and thus cannot be applied directly. In this work, a new fault identification method is proposed, which is based on the deep neural network for closed-loop control systems. Firstly, the fault propagation mechanism in closed-loop control systems is theoretically derived, and the influence of fault propagation on system variables is analyzed. Then deep neural network is applied to find fault characteristics difference between different data modes, and a sliding window is used to amplify the fault-to-noise ratio and characteristics difference, with an aim to increase the identification performance. To verify this method, the simulations that are based on a numerical simulation model, the Tennessee industrial system and the satellite attitude control system are conducted. The results show that the proposed method is more feasible and more effective in fault identification for closed-loop control systems compared with traditional data-driven identification methods, including distance-based and angle-based identification methods. [ABSTRACT FROM AUTHOR]

Condition monitoring can reduce machine breakdown losses, increase productivity and operation safety, and therefore deliver significant benefits to many industries. The emergence of wireless sensor networks (WSNs) with smart processing ability play an ever-growing role in online condition monitoring of machines. WSNs are cost-effective networking systems for machine condition monitoring. It avoids cable usage and eases system deployment in industry, which leads to significant savings. Powering the nodes is one of the major challenges for a true WSN system, especially when positioned at inaccessible or dangerous locations and in harsh environments. Promising energy harvesting technologies have attracted the attention of engineers because they convert microwatt or milliwatt level power from the environment to implement maintenance-free machine condition monitoring systems with WSNs. The motivation of this review is to investigate the energy sources, stimulate the application of energy harvesting based WSNs, and evaluate the improvement of energy harvesting systems for mechanical condition monitoring. This paper overviews the principles of a number of energy harvesting technologies applicable to industrial machines by investigating the power consumption of WSNs and the potential energy sources in mechanical systems. Many models or prototypes with different features are reviewed, especially in the mechanical field. Energy harvesting technologies are evaluated for further development according to the comparison of their advantages and disadvantages. Finally, a discussion of the challenges and potential future research of energy harvesting systems powering WSNs for machine condition monitoring is made. [ABSTRACT FROM AUTHOR]