Search

The possibility of achieving experimentally controlled, non-vocal acoustic production in non-human primates is a key step to enable the testing of a number of hypotheses on primate behavior and cognition. However, no device or solution is currently available, with the use of sensors in non-human animals being almost exclusively devoted to applications in food industry and animal surveillance. Specifically, no device exists which simultaneously allows: (i) spontaneous production of sound or music by non-human animals via object manipulation, (ii) systematical recording of data sensed from these movements, (iii) the possibility to alter the acoustic feedback properties of the object using remote control. We present two prototypes we developed for application with chimpanzees (Pan troglodytes) which, while fulfilling the aforementioned requirements, allow to arbitrarily associate sounds to physical object movements. The prototypes differ in sensing technology, costs, intended use and construction requirements. One prototype uses four piezoelectric elements embedded between layers of Plexiglas and foam. Strain data is sent to a computer running Python through an Arduino board. A second prototype consists in a modified Wii Remote contained in a gum toy. Acceleration data is sent via Bluetooth to a computer running Max/MSP. We successfully pilot tested the first device with a group of chimpanzees. We foresee using these devices for a range of cognitive experiments. [ABSTRACT FROM AUTHOR]

The assembly and maintenance of electrified railway systems is of vital importance for its correct operation. Contact wires are critical elements since the correct collection of energy from trains through pantographs depends on them. Periodical inspection of the state of these installations is essential. This task traditionally implies a heavy manual workload subject to errors. A new system that allows one to check the state (height and stagger) of contact and messenger wires is presented on this article blueA new method based on seven steps for identifying the contact wires and measuring their height and stagger from point clouds recorded by means of a LiDAR system is presented. This system can be used both in assembly and maintenance phases, as well as afterwards, allowing the analysis of point clouds previously recorded. The new method was evaluated in both test bench and real environments against the commonly used measurement method. Results with the comparison between this new system and the commonly used measurement method in both test bench and real railway environments are presented. Results of this comparison show differences of less than a centimetre on average and the amount of time spent for the measuring phase is significantly decreased and not prone to human errors. [ABSTRACT FROM AUTHOR]

Socially assistive robots have been used in the care of elderly or dependent people, particularly with patients suffering from neurological diseases, like autism and dementia. There are some proposals, but there are no standardized mechanisms for assessing a particular robot's suitability for specific therapy. This paper reports the evaluation of an acceptance test for assistive robots applied to people with dementia. The proposed test focuses on evaluating the suitability of a robot during therapy sessions. The test measures the rejection of the robot by the patient based on observational data. This test would recommend what kind of robot and what functionalities can be used in therapy. The novelty of this approach is the formalization of a specific validation process that only considers the reaction of the person to whom the robot is applied, and may be used more effectively than existing tests, which may not be adequate for evaluating assistance robots. The test's feasibility was tested by applying it to a set of dementia patients in a specialized care facility. [ABSTRACT FROM AUTHOR]